Establishment and Application of Assessment Indicator System of Agricultural Catastrophe Vulnerability

To give play to the role of agricultural catastrophe risk fund in spreading agricultural catastrophe risk,we select natural conditions,economic conditions,social conditions,as the external vulnerability assessment indicators;select commodity rate of agricultural products,substitutability of agricultural products,the extent of agricultural products being related to the national economy and the people's livelihood,as the internal vulnerability assessment indicators.We assign weight to indicators using Analytic Hierarchy Process,and establish assessment indicator system of agricultural catastrophe vulnerability,to analyze the compensation for losses of different agricultural products arising from agricultural catastrophe in different regions.And we take the case of rice in Sichuan Province,to demonstrate the role this indicator system.

Evolution of seismic risk management for insurance over the past 30 years

During the past 30 years, there has been spectacular growth in the use of risk analysis and risk management tools developed by engineers in the financial and insurance sectors. The insurance, the reinsurance, and the investment banking sectors have enthusiastically adopted loss estimation tools developed by engineers in developing their business strategies and for managing their financial risks. As a result, insurance/reinsurance strategy has evolved as a major risk mitigation tool in managing catastrophe risk at the individual, corporate, and government level. This is particularly true in developed countries such as US, Western Europe, and Japan. Unfortunately, it has not received the needed attention in developing countries, where such a strategy for risk management is most needed. Fortunately, in the last five years, there has been excellent focus in developing ＂Insur Tech＂ tools to address the much needed ＂Insurance for the Masses＂, especially for the Asian Markets. In the earlier years of catastrophe model development, risk analysts were mainly concerned with risk reduction options through engineering strategies, and relatively little attention was given to financial and economic strategies. Such state-of-affairs still exists in many developing countries. The new developments in the science and technologies of loss estimation due to natural catastrophes have made it possible for financial sectors to model their business strategies such as peril and geographic diversification, premium calculations, reserve strategies, reinsurance contracts, and other underwriting tools. These developments have not only changed the way in which financial sectors assess and manage their risks, but have also changed the domain of opportunities for engineers and scientists.This paper will address the issues related to developing insurance/reinsurance strategies to mitigate catastrophe risks and describe the role catastrophe risk insurance and reinsurance has played in managing financial risk due to natural catastrophes. Historical losses and the share of those losses covered by insurance will be presented. How such risk sharing can help the nation share the burden of losses between tax paying public, the ＂at risk＂ property owners, the insurers and the reinsurers will be discussed. The paper will summarize the tools that are used by the insurance and reinsurance companies for estimating their future losses due to catastrophic natural events. The paper will also show how the results of loss estimation technologies developed by engineers are communicated to the business flow of insurance/reinsurance companies. Finally, to make it possible to grow ＂Insurance for the Masses - IFM＂, the role played by parametric insurance products and Insur Tech tools will be discussed.

Exciting News from Indentations onto Silicon, Copper, and Tungsten

Indentations onto crystalline silicon and copper with various indenter geometries, loading forces at room temperature belong to the widest interests in the field, because of the physical detection of structural phase transitions. By using the mathematically deduced FNh3/2 relation for conical and pyramidal indentations we have a toolbox for deciding between faked and experimental loading curves. Four printed silicon indentation loading curves (labelled with 292 K, 260 K, 240 K and 210 K) proved to be faked and not experimental. This is problematic for the AI (artificial intelligence) that will probably not be able to sort faked data out by itself but must be told to do so. High risks arise, when published faked indentation reports remain unidentified and unreported for the mechanics engineers by reading, or via AI. For example, when AI recommends a faked quality such as “no phase changes” of a technical material that is therefore used, it might break down due to an actually present low force, low transition energy phase-change. This paper thus installed a tool box for the distinction of experimental and faked loading curves of indentations. We found experimental and faked loading curves of the same research group with overall 14 authoring co-workers in three publications where valid and faked ones were next to each other and I can thus only report on the experimental ones. The comparison of Si and Cu with W at 20-fold higher physical hardness shows its enormous influence to the energies of phase transition and of their transition energies. Thus, the commonly preferred ISO14577-ASTM hardness values HISO (these violate the energy law and are simulated!) leads to almost blind characterization and use of mechanically stressed technical materials (e.g. airplanes, windmills, bridges, etc). The reasons are carefully detected and reported to disprove that the coincidence or very close coincidence of all of the published loading curves from 150 K to 298 K are constructed but not experimental. A tool-box for distinction of experimental from faked indentation loading curves (simulations must be indicated) is established in view of protecting the AI from faked data, which it might not be able by itself to sort them out, so that technical materials with wrongly attributed mechanical properties might lead to catastrophic accidents such as all of us know of. There is also the risk that false theories might lead to discourage the design of important research projects or for not getting them granted. This might for example hamper or ill-fame new low temperature indentation projects. The various hints for identifying faked claims are thus presented in great detail. The low-temperature instrumental indentations onto silicon have been faked in two consecutive publications and their reporting in the third one, so that these are not available for the calculation of activation energies. Conversely, the same research group published an indentation loading curve of copper as taken at 150 K that could be tested for its validity with the therefore created tools of validity tests. The physical algebraic calculations provided the epochal detection of two highly exothermic phase transitions of copper that created two polymorphs with negative standard energy content. This is world-wide the second case and the first one far above the 77 K of liquid nitrogen. Its existence poses completely new thoughts for physics chemistry and perhaps techniques but all of them are open and unprepared for our comprehension. The first chemical reactions might be in-situ photolysis and the phase transitions can be calculated from experimental curves. But several further reported low temperature indentation loading curves of silicon were tested for their experimental reality. And the results are compared to new analyses with genuine room temperature results. A lot is to be learned from the differences at room and low temperature.

Wind risk and mitigation calculator framework for determining the wind annualized risk for single- and multi-family homes to support resilient community decision-making

Communicating risks and mitigation benefits associated with natural hazards such as wind to the general public is challenging given the location-dependency of parameters and the complexity of the problem.Web tools play a crucial role in educating residents,decision-makers,and stakeholders regarding potential wind hazard losses to,for example,residential buildings.However,a notable gap exists on the practical incorporation of mitigation actions within these tools.This gap hampers the collective awareness and understanding among stakeholders,communities,and citizens regarding the tangible advantages of mitigation strategies in reducing wind-related risks.Furthermore,there exists a need to elucidate the functionality and objectives of these tools in a more accessible manner.This study aims to present and outline the wind risk and mitigation calculator tool(WRMCT)within the Hazardaware platform,which is an address-based risk assessment tool.This tool,developed for 196 counties in the Gulf of Mexico coastal area,facilitates users’education of potential risks and benefits associated with mitigation strategies.WRMCT enables users to access location-specific wind risk and interactively suggests potential mitigation actions along with economic savings to support informed decisions and residential risk reduction.WRMCT intends to enhance users’ability to make informed decisions,take proactive measures in mitigating wind hazards,and contribute to the development of resilient,residential communities.

Agricultural Risk Modeling Challenges in China:Probabilistic Modeling of Rice Losses in Hunan Province

This article summarizes a joint research projec undertaken under the Risk Management Solutions, Inc(RMS) banner to investigate some of the possible approaches for agricultural risk modeling in China. Two modeling approaches were investigated—the simulated weather crop index and the burn yield analysis approach. The study was limited to Hunan Province and a single crop—rice. Both modeling approaches were dealt with probabilistically and were able to produce probabilistic risk metrics. Illustrative model outputs are also presented. The article discusses the robustness of the modeling approaches and their dependence on the availability, access to, and quality of weather and yield data. We offer our perspective on the requirements for models and platforms for agricultural risk quantification in China in order to respond to the needs of all stakeholders in agricultural risk transfer.

Cost-Effectiveness of Interventions for Alternate Food to Address Agricultural Catastrophes Globally

The literature suggests there is about a 1 % risk per year of a 10 % global agricultural shortfall due to catastrophes such as a large volcanic eruption, a medium asteroid or comet impact, regional nuclear war, abrupt climate change, and extreme weather causing multiple breadbasket failures. This shortfall has an expected mortality of about 500 million people. To prevent such mass starvation, alternate foods can be deployed that utilize stored biomass. This study developed a model with literature values for variables and, where no values existed,used large error bounds to recognize uncertainty. Then Monte Carlo analysis was performed on three interventions: planning, research, and development. The results show that even the upper bound of USD 400 per life saved by these interventions is far lower than what is typically paid to save a life in a less-developed country. Furthermore, every day of delay on the implementation of these interventions costs 100–40,000 expected lives(number of lives saved multiplied by the probability that alternate foods would be required). These interventions plus training would save 1–300 million expected lives. In general, these solutions would reduce the possibility of civilization collapse, could assist in providing food outside of catastrophic situations, and would result in billions of dollars per year of return.

Assessing the Impact of Catastrophic Electricity Loss on the Food Supply Chain

The food supply chain's heavy reliance on electricity poses significant vulnerabilities in the event of prolonged and widespread power disruptions. This study introduces a system-dynamics model that integrates five critical infrastructures-electric grid, liquid fossil fuels, Internet, transportation, and human workforce-to evaluate the resilience of food supply chains to major power outages. We validated the model using the 2019 Venezuelan blackouts as a case study, demonstrating its predictive validity. We then explored how more extreme electricity losses would disrupt the supply chain. More specifically, we modeled the impact of a large-scale cyberattack on the US electric grid and a high-altitude electromagnetic pulse(HEMP)event. A cyberattack severely damaging the US electric grid and allowing for recovery within a few weeks or months would lead to substantial drops in food consumption. However, it would likely still be possible to provide adequate calories to everyone, assuming that food is equitably distributed. In contrast, a year-long recovery from a HEMP event affecting most of the continental United States could precipitate a state of famine. Our analysis represents a first attempt at quantifying how food availability progressively worsens as power outages extend over time. Our open-source model is made publicly available, and we encourage its application to other catastrophic scenarios beyond those specifically considered in this work(for example, extreme solar storms, high-lethality pandemics).