Typical cationic and anionic surfactants were chosen and their interactions were calculated by quantum chemical method. Interaction energies are -0.2378 kJ·mol-1, -3.3394kJ·mol-1 and 0.1204kJ·mol-1 for ...Typical cationic and anionic surfactants were chosen and their interactions were calculated by quantum chemical method. Interaction energies are -0.2378 kJ·mol-1, -3.3394kJ·mol-1 and 0.1204kJ·mol-1 for the molecular pairs with fluocarbon and hydrocarbon chain: C4H10/C5H12, C4F10/C5H12, and C4F10 /C5F12, respectively. When hydrophilic group with cationic and anionicions is introduced, interaction energies are -287.40kJ·mol-1, -311.18kJ·mol-1 and -345.83kJ·mol-1. The results show that there is strong static interaction between cationic and anionic surfactants. It has been predicted that mixed monolayer may be formed and surface activity is enhanced favorably, especially for mixtures of cationic and anionic surfactants with fluocarbon and hydrocarbon chains. The anionic surfactants, sodium octadecylbenzenesulfonate perfluopolyetherbenzenesulonate(ANF-I) was synthesized, mixture effects of ANF-I with sodium octadecylbenzenesulfonate or dodecyldimethyl benzylammonium bromide were studied. The results indicate that the efficiency of mixing increased and the theoretical prediction was testified. These results can provide useful information for the design of new surfactants.展开更多
The first pilot test of polyacrylamide microsphere alternate surfactant flood(PMAS)with mixtures of anionic-cationic surfactants(Sa/c)was carried out for a high-temperature,high-salinity,and highhardness sandstone res...The first pilot test of polyacrylamide microsphere alternate surfactant flood(PMAS)with mixtures of anionic-cationic surfactants(Sa/c)was carried out for a high-temperature,high-salinity,and highhardness sandstone reservoir to demonstrate the potential of this novel technique to improve oil recovery.A critical micelle concentration(CMC)of 4.82 mg/L,an ultralow interfacial tension(IFT)of 8104 mN/m,and a high oil solubilization of 22 were obtained.Static and dynamic adsorptions of Sa/c on natural core containing 15 wt%clay were reduced to about 2.20 and 0.30 mg/g-core,respectively,with the addition of adsorption inhibitor(AI).Since June 2014,the pilot test of PMAS was carried out in a Sinopec reservoir with a temperature of 87C,a salinity of 260,393 mg/L,and a hardness of 6,401 mg/L.Twelve cycles of alternative injection of 0.0125 PV Sa/c with a concentration of 0.1%and 0.0125 PV polyacrylamide microsphere with a concentration of 0.2%were conducted at an injection rate of 0.1 PV/yr,for a total of 0.3 PV chemical injection.As a result,the net daily oil production increased from 0 t to 6.5 t,and the water cut decreased from 96.3%to 93.8%,leading to an ultimate improved oil recovery of 6.3%original oil-in-place.展开更多
文摘Typical cationic and anionic surfactants were chosen and their interactions were calculated by quantum chemical method. Interaction energies are -0.2378 kJ·mol-1, -3.3394kJ·mol-1 and 0.1204kJ·mol-1 for the molecular pairs with fluocarbon and hydrocarbon chain: C4H10/C5H12, C4F10/C5H12, and C4F10 /C5F12, respectively. When hydrophilic group with cationic and anionicions is introduced, interaction energies are -287.40kJ·mol-1, -311.18kJ·mol-1 and -345.83kJ·mol-1. The results show that there is strong static interaction between cationic and anionic surfactants. It has been predicted that mixed monolayer may be formed and surface activity is enhanced favorably, especially for mixtures of cationic and anionic surfactants with fluocarbon and hydrocarbon chains. The anionic surfactants, sodium octadecylbenzenesulfonate perfluopolyetherbenzenesulonate(ANF-I) was synthesized, mixture effects of ANF-I with sodium octadecylbenzenesulfonate or dodecyldimethyl benzylammonium bromide were studied. The results indicate that the efficiency of mixing increased and the theoretical prediction was testified. These results can provide useful information for the design of new surfactants.
文摘The first pilot test of polyacrylamide microsphere alternate surfactant flood(PMAS)with mixtures of anionic-cationic surfactants(Sa/c)was carried out for a high-temperature,high-salinity,and highhardness sandstone reservoir to demonstrate the potential of this novel technique to improve oil recovery.A critical micelle concentration(CMC)of 4.82 mg/L,an ultralow interfacial tension(IFT)of 8104 mN/m,and a high oil solubilization of 22 were obtained.Static and dynamic adsorptions of Sa/c on natural core containing 15 wt%clay were reduced to about 2.20 and 0.30 mg/g-core,respectively,with the addition of adsorption inhibitor(AI).Since June 2014,the pilot test of PMAS was carried out in a Sinopec reservoir with a temperature of 87C,a salinity of 260,393 mg/L,and a hardness of 6,401 mg/L.Twelve cycles of alternative injection of 0.0125 PV Sa/c with a concentration of 0.1%and 0.0125 PV polyacrylamide microsphere with a concentration of 0.2%were conducted at an injection rate of 0.1 PV/yr,for a total of 0.3 PV chemical injection.As a result,the net daily oil production increased from 0 t to 6.5 t,and the water cut decreased from 96.3%to 93.8%,leading to an ultimate improved oil recovery of 6.3%original oil-in-place.
