With the development of the economy and improving quality of life,sunscreen products have become an indispensable part of people’s daily lives.However,traditional sunscreen products have several shortcomings,such as ...With the development of the economy and improving quality of life,sunscreen products have become an indispensable part of people’s daily lives.However,traditional sunscreen products have several shortcomings,such as sticky skin feel,clumping,and skin irritation.In addition,the price of sunscreen products is relatively high due to the expensive ingredient:UV absorbers.To solve the above problems,a film-forming agent had been added to the general sunscreen formula to synergistically improve the consumer experience without causing any adverse side effects.It is crucial to achieve sun protection factors(SPF)booster through other cheaper agents.This article mainly studies and verifies the synergistic impact of Carfil■UV35(a water-based polyurethane product)in sunscreen products and discusses its application scope.The hen’s eggchorioallantoic membrane assay(HET-CAM)test and the human patch test were used to verify its mildness to the skin.Results also showed that Carfil■UV35 could effectively improve the water resistance of sunscreen products.What’s more,the SPF improvement test shows that only 5% Carfil■UV35 can increase the SPF value from 15 to 30.In short,the research in this article can provide specific ideas for the formulation design of sunscreen products and is of great significance to the application and SPF increase of water-based polyurethane film-forming agents in sunscreen cosmetics.展开更多
Castor oil-based cationic waterborne polyurethane(CWPU)was synthesized by pre-polymer process using castor oil(CO),poly(adipic acid-1,4-succinate diol)(PBA),isophorone diisocyanate(IPDI),and N-methyldiethanolamine(MDE...Castor oil-based cationic waterborne polyurethane(CWPU)was synthesized by pre-polymer process using castor oil(CO),poly(adipic acid-1,4-succinate diol)(PBA),isophorone diisocyanate(IPDI),and N-methyldiethanolamine(MDEA).The influences of the content of CO and MDEA on comprehensive performance and finished fabric properties of cationic waterborne polyurethane was investigated,especially the antibacterial properties of finished fabric.The CWPU latex particle size and its distribution decrease as the content of CO increased from 0wt%to 16.8wt%,and increases afterwards.The CWPU films show much higher thermal stability than cationic waterborne polyurethane without CO.The surface of fabrics was characterized by scanning electron microscope(SEM).The finished fabric surface is much smoother.In addition,the finished fabric with CWPU emulsion has better antibacterial property against E.coli and S.aureus.When MDEA content is 8%,the antibacterial rates of the two kinds of bacteria are 77.3%and 82.2%,respectively.展开更多
The main purpose of this research work is to improve anti-static properties of Cashmere fabric by introducing application comprising anti-static agent by foaming which was made with cationic waterborne polyurethane an...The main purpose of this research work is to improve anti-static properties of Cashmere fabric by introducing application comprising anti-static agent by foaming which was made with cationic waterborne polyurethane and graphene-CNC. Cashmere fabric was cut into 10 pieces of sample cloth of 5 cm * 5 cm size, washed with acetone solution, and then dried in an oven at 60℃. Three forms of waterborne polyurethanes such as two forms of Cationic waterborne polyurethane (CWPU) and a form of Anionic waterborne polyurethane (AWPU) were synthesized. Cellulose nanocrystalline (CNC)/graphite powder solution with the ratio of 0.5/1, 1/1, 2/1 was prepared by ultrasonic probe stripping method, and the concentration of graphite powder was ensured to be 1 mg/ml. The fabric was treated with anionic and cationic WPUs foaming solution until the weight gain reached 2.5 - 3.5 wt%. After drying, the elastic cloth was foamed with graphene solution until the graphite content of the cloth was close to 10%, 20%, 40%, 60% respectively, and then dried for reserving. Characterization properties of pure graphite powder, pure CNC and graphene solution with different proportions of three components were tested by Fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), Thermalgravitimetric analysis (TGA) and scanning electron microscopy (SEM). Take the original cloth, only WPU treated cloth and four clothes with different graphite content for the fabric performance test.展开更多
A cationic waterborne polyurethane(CWPU) was synthesized and utilized as impregnation material for manufacturing microfiber synthetic leather base,in an attempt to decrease environmental pollution associated with orga...A cationic waterborne polyurethane(CWPU) was synthesized and utilized as impregnation material for manufacturing microfiber synthetic leather base,in an attempt to decrease environmental pollution associated with organic solvents and improve simulation degree relative to genuine leather.The alkali resistance of the CWPU and four manufacture methods were investigated.Meanwhile,the dyeing properties of the microfiber synthetic leather base were studied.It was found that the CWPU displayed enough alkali resistance to endure the alkali deweighting process for microfiber synthetic leather base manufacture.In terms of bending length,bending rigidity,compression elasticity ratio and specific compression elasticity ratio of the resulting base,coagulating the impregnated CWPU with sodium hydroxide before steam treatment was the optimal method.The extent of fiber splitting and the handle of the base from this method were both similar to conventional base filled with solvent-based polyurethane(SPU).The dyeing properties of the microfiber synthetic leather base filled with CWPU were also found superior to the one filled with either anionic waterborne polyurethane(AWPU) or SPU.展开更多
High solid content CO_(2)-based cationic waterborne polyurethanes(CWPUs)were prepared using CO_(2)-polyols as soft segment and Nmethyl diethanolamine(MDEA)as hydrophilic group.The resulting stable aqueous dispersion d...High solid content CO_(2)-based cationic waterborne polyurethanes(CWPUs)were prepared using CO_(2)-polyols as soft segment and Nmethyl diethanolamine(MDEA)as hydrophilic group.The resulting stable aqueous dispersion displayed a high solid content of 52%with a low MDEA loading of 3.52 wt%.This novel structural CWPU can provide excellent adhesive strength,whose T-peel strength could reach 173.48N/5cm,20%higher than that of ester-based cationic waterborne polyurethane(87.55 N/5cm).The CO_(2)-based CWPU film showed only 2 wt%swelling percentage after 240 min immersion in water,and no change was observed during its immersion in 5 wt%sodium hydroxide solution.The tensile strength of CO_(2)-WPUs dropped slowly to 91.2%after 480 min immersion in a 5 wt%sodium hydroxide solution,whereas that of esterbased CWPUs dropped quickly to 32%after 240 min and their mechanical properties were lost after 360 min immersion.Meanwhile,the retention of the tensile strength of the CO_(2)-CWPUs was 81.5%even after 720 min immersion in 10 wt%H_(2)O_(2) solution,while it was only ca.38%for the ester-based CWPUs.These results indicated that the cationic CO_(2)-based CWPU may be promising waterborne adhesive with outstanding ageing resistance due to its synergistic effect from carbonate and ether groups of CO_(2)-polyol structure.展开更多
The cationic polyurethane/CeO 2 nanocomposite dispersion has been synthesiz ed by adding ceria organosol to pre-polymer of polyurethane and then adding neutralization reagent and water to give an emulsion. FTIR analys...The cationic polyurethane/CeO 2 nanocomposite dispersion has been synthesiz ed by adding ceria organosol to pre-polymer of polyurethane and then adding neutralization reagent and water to give an emulsion. FTIR analysis shows blue shift of the absorpsion band of CeO 2 . TEM micrograph shows that CeO 2 nano- particles ar e uniformly dispersed in polyurethane. Polyurethane/CeO 2 nanocomposite has high absorption at the region lower 350 nm.展开更多
文摘With the development of the economy and improving quality of life,sunscreen products have become an indispensable part of people’s daily lives.However,traditional sunscreen products have several shortcomings,such as sticky skin feel,clumping,and skin irritation.In addition,the price of sunscreen products is relatively high due to the expensive ingredient:UV absorbers.To solve the above problems,a film-forming agent had been added to the general sunscreen formula to synergistically improve the consumer experience without causing any adverse side effects.It is crucial to achieve sun protection factors(SPF)booster through other cheaper agents.This article mainly studies and verifies the synergistic impact of Carfil■UV35(a water-based polyurethane product)in sunscreen products and discusses its application scope.The hen’s eggchorioallantoic membrane assay(HET-CAM)test and the human patch test were used to verify its mildness to the skin.Results also showed that Carfil■UV35 could effectively improve the water resistance of sunscreen products.What’s more,the SPF improvement test shows that only 5% Carfil■UV35 can increase the SPF value from 15 to 30.In short,the research in this article can provide specific ideas for the formulation design of sunscreen products and is of great significance to the application and SPF increase of water-based polyurethane film-forming agents in sunscreen cosmetics.
文摘Castor oil-based cationic waterborne polyurethane(CWPU)was synthesized by pre-polymer process using castor oil(CO),poly(adipic acid-1,4-succinate diol)(PBA),isophorone diisocyanate(IPDI),and N-methyldiethanolamine(MDEA).The influences of the content of CO and MDEA on comprehensive performance and finished fabric properties of cationic waterborne polyurethane was investigated,especially the antibacterial properties of finished fabric.The CWPU latex particle size and its distribution decrease as the content of CO increased from 0wt%to 16.8wt%,and increases afterwards.The CWPU films show much higher thermal stability than cationic waterborne polyurethane without CO.The surface of fabrics was characterized by scanning electron microscope(SEM).The finished fabric surface is much smoother.In addition,the finished fabric with CWPU emulsion has better antibacterial property against E.coli and S.aureus.When MDEA content is 8%,the antibacterial rates of the two kinds of bacteria are 77.3%and 82.2%,respectively.
文摘The main purpose of this research work is to improve anti-static properties of Cashmere fabric by introducing application comprising anti-static agent by foaming which was made with cationic waterborne polyurethane and graphene-CNC. Cashmere fabric was cut into 10 pieces of sample cloth of 5 cm * 5 cm size, washed with acetone solution, and then dried in an oven at 60℃. Three forms of waterborne polyurethanes such as two forms of Cationic waterborne polyurethane (CWPU) and a form of Anionic waterborne polyurethane (AWPU) were synthesized. Cellulose nanocrystalline (CNC)/graphite powder solution with the ratio of 0.5/1, 1/1, 2/1 was prepared by ultrasonic probe stripping method, and the concentration of graphite powder was ensured to be 1 mg/ml. The fabric was treated with anionic and cationic WPUs foaming solution until the weight gain reached 2.5 - 3.5 wt%. After drying, the elastic cloth was foamed with graphene solution until the graphite content of the cloth was close to 10%, 20%, 40%, 60% respectively, and then dried for reserving. Characterization properties of pure graphite powder, pure CNC and graphene solution with different proportions of three components were tested by Fourier transform infrared spectrometer (FTIR), X-ray diffraction (XRD), Thermalgravitimetric analysis (TGA) and scanning electron microscopy (SEM). Take the original cloth, only WPU treated cloth and four clothes with different graphite content for the fabric performance test.
基金National Natural Science Foundations,China(Nos.51273128,21206096)New Teachers’Fund for Doctor Stations of Education Ministry,China(No.20120181120116)
文摘A cationic waterborne polyurethane(CWPU) was synthesized and utilized as impregnation material for manufacturing microfiber synthetic leather base,in an attempt to decrease environmental pollution associated with organic solvents and improve simulation degree relative to genuine leather.The alkali resistance of the CWPU and four manufacture methods were investigated.Meanwhile,the dyeing properties of the microfiber synthetic leather base were studied.It was found that the CWPU displayed enough alkali resistance to endure the alkali deweighting process for microfiber synthetic leather base manufacture.In terms of bending length,bending rigidity,compression elasticity ratio and specific compression elasticity ratio of the resulting base,coagulating the impregnated CWPU with sodium hydroxide before steam treatment was the optimal method.The extent of fiber splitting and the handle of the base from this method were both similar to conventional base filled with solvent-based polyurethane(SPU).The dyeing properties of the microfiber synthetic leather base filled with CWPU were also found superior to the one filled with either anionic waterborne polyurethane(AWPU) or SPU.
基金financially supported by the National Natural Science Foundation of China(No.32071686)。
文摘High solid content CO_(2)-based cationic waterborne polyurethanes(CWPUs)were prepared using CO_(2)-polyols as soft segment and Nmethyl diethanolamine(MDEA)as hydrophilic group.The resulting stable aqueous dispersion displayed a high solid content of 52%with a low MDEA loading of 3.52 wt%.This novel structural CWPU can provide excellent adhesive strength,whose T-peel strength could reach 173.48N/5cm,20%higher than that of ester-based cationic waterborne polyurethane(87.55 N/5cm).The CO_(2)-based CWPU film showed only 2 wt%swelling percentage after 240 min immersion in water,and no change was observed during its immersion in 5 wt%sodium hydroxide solution.The tensile strength of CO_(2)-WPUs dropped slowly to 91.2%after 480 min immersion in a 5 wt%sodium hydroxide solution,whereas that of esterbased CWPUs dropped quickly to 32%after 240 min and their mechanical properties were lost after 360 min immersion.Meanwhile,the retention of the tensile strength of the CO_(2)-CWPUs was 81.5%even after 720 min immersion in 10 wt%H_(2)O_(2) solution,while it was only ca.38%for the ester-based CWPUs.These results indicated that the cationic CO_(2)-based CWPU may be promising waterborne adhesive with outstanding ageing resistance due to its synergistic effect from carbonate and ether groups of CO_(2)-polyol structure.
文摘The cationic polyurethane/CeO 2 nanocomposite dispersion has been synthesiz ed by adding ceria organosol to pre-polymer of polyurethane and then adding neutralization reagent and water to give an emulsion. FTIR analysis shows blue shift of the absorpsion band of CeO 2 . TEM micrograph shows that CeO 2 nano- particles ar e uniformly dispersed in polyurethane. Polyurethane/CeO 2 nanocomposite has high absorption at the region lower 350 nm.
