Calculation of Mass Concrete Temperature and Creep Stress under the Influence of Local Air Heat Transfer

Temperature-induced cracking during the construction of mass concrete is a significant concern.Numerical simulations of concrete temperature have primarily assumed that the concrete is placed in an open environment.The problem of heat transfer between the air and concrete has been simplified to the concrete’s heat dissipation boundary.However,in the case of tubular concrete structures,where air inlet and outlet are relatively limited,the internal air temperature does not dissipate promptly to the external environment as it rises.To accurately simulate the temperature and creep stress in tubular concrete structures with enclosed air spaces during construction,we establish an air–concrete coupled heat transfer model according to the principles of conjugate heat transfer,and the accuracy of the model is verified through experiments.Furthermore,we conduct a case study to analyze the impact of airflow within the ship lock corridor on concrete temperature and creep stress.The results demonstrate that enhancing airflow within the corridor can significantly reduce the maximum concrete temperature.Compared with cases in which airflow within the corridor is neglected,the maximum concrete temperature and maximum tensile stress can be reduced by 12.5℃ and 0.7 MPa,respectively,under a wind speed of 4 m/s.The results of the traditional calculation method are relatively close to those obtained at a wind speed of 1 m/s.However,the temperature reduction process in the traditional method is faster,and the method yields greater tensile stress values for the corridor location.

Temperature and stress fields in electron beam welded Ti-15-3 alloy to 304 stainless steel joint with copper interlayer sheet

Electron beam welding of Ti-15-3 alloy to 304 stainless steel （STS） using a copper filler metal was carried out. The temperature fields and stress distributions in the Ti/Fe and Ti/Cu/Fe joint during the welding process were numerically simulated and experimentally measured. The results show that the rotated parabola body heat source is fit for the simulation of the electron beam welding. The temperature distribution is asymmetric along the weld center and the temperature in the titanium alloy plate is higher than that in the 304 STS plate. The thermal stress also appears to be in asymmetric distribution. The residual tensile stress mainly exists in the weld at the 304 STS side. The copper filler metal decreases the peak temperature and temperature grade in the joint as well as the residual stress. The longitudinal and lateral residual tensile strengths reduce by 66 MPa and 31 MPa, respectively. From the temperature and residual stress, it is concluded that copper is a good filler metal candidate for the electron beam welding of Ti-15-3 titanium alloy to 304 stainless steel.

Numerical Simulation of Temperature Field and Thermal Stress Field of Work Roll During Hot Strip Rolling

Based on the thermal conduction equations, the three-dimensional （3D） temperature field of a work roll was investigated using finite element method （FEM）. The variations in the surface temperature of the work roll during hot strip rolling were described, and the thermal stress field of the work roll was also analyzed. The results showed that the highest roll surface temperature is 593 ℃, and the difference between the minimum and maximum values of thermal stress of the work roll surface is 145.7 MPa. Furthermore, the results of this analysis indicate that temperature and thermal stress are useful parameters for the investigation of roll thermal fatigue and also for improving the quality of strip during rolling.

COUPLED NUMERICAL SIMULATION ON COLD ROLLER'S TEMPERATURE FIFLD-PHASE TRANSFORMATION - STRESS FIELD DURING ITS QUENCHING PSOCESS

Complicated changns occur inside the steel parts during quenching process. The abruptly changed boundary conditions make the temperature field,micro - structure and stress field change dramatically in very short time, and these variables take a contact interactions in the whole process. In this paper, a three dimensional non - linear mathematical model for queeching process has been founded and the numerical simulation on temperature field,microstructre and stress field has been realized.In the FEM analysis, the incremental iteration method is used to deal with such complicated nonlinear as boundary nonlinear, physical property nonlinear,transformation nonlinear etc.The effect of stress on transformation kinetics has been considered in the calculation of microstructure. In the stress field anal- ysis,a thermo- elasto - plastic model has been founded, which considers such factors as transforma- tion strain,transformation plastic strain, themal strain and the effect of temperature and transforma- tion on mechanical propertier etc. The transient temperature field, microstructure distribution and stress field of the roller on any time can be displayed vividly,and the cooling curve and the changes of stress on any position can also be given.

Finite element analysis of temperature and stress fields during selective laser melting process of Al−Mg−Sc−Zr alloy

A 3D finite element model was established to investigate the temperature and stress fields during the selective laser melting process of Al−Mg−Sc−Zr alloy.By considering the powder−solid transformation,temperaturedependent thermal properties,latent heat of phase transformations and molten pool convection,the effects of laser power,point distance and hatch spacing on the temperature distribution,molten pool dimensions and residual stress distribution were investigated.Then,the effects of laser power,point distance and hatch spacing on the microstructure,density and hardness of the alloy were studied by the experimental method.The results show that the molten pool size gradually increases as the laser power increases and the point distance and hatch spacing decrease.The residual stress mainly concentrates in the middle of the first scanning track and the beginning and end of each scanning track.Experimental results demonstrate the accuracy of the model.The density of the samples tends to increase and then decrease with increasing laser power and decreasing point distance and hatch spacing.The optimum process parameters are laser power of 325−375 W,point distance of 80−100μm and hatch spacing of 80μm.

Numerical Simulation of Temperature and Stress Fields of Ti-Alloy Thin-well Barrel during Quenching Process

The mathematical models have been established to describe the temperature and stress profiles in T16A14V cylinder during quenching. The residual stress and deformation of the workpiece can be predicted precisely based on ANSYS software. The simulated results show that the temperature of the divided element decreases faster at the edge than that at the internal of the workpiece during quenching from 1050 to 20°C. The largest temperature difference and dimension change in diameter are about 90°C and -0.935%, respectively. The position of largest tensile stress occurs around the edge of the cylinder.

Analysis on high-temperature oxidation and growth stress of iron-based alloy using phase field method

High-temperature oxidation is an important property to evaluate thermal protection materials. However, since oxidation is a complex process involving microstructure evolution, its quantitative analysis has always been a challenge. In this work, a phase field method （PFM） based on the thermodynamics theory is developed to simulate the oxidation behavior and oxidation induced growth stress. It involves microstructure evolution and solves the problem of quantitatively computational analysis for the oxidation behavior and growth stress. Employing this method, the diffusion process, oxidation performance, and stress evolution axe predicted for Fe-Cr-A1-Y alloys. The numerical results agree well with the experimental data. The linear relationship between the maximum growth stress and the environment oxygen concentration is found. PFM provides a powerful tool to investigate high-temperature oxidation in complex environments.

SIMULATION OF TEMPERATURE AND THERMAL STRESS FIELD IN LASER MILLING PROCESSING

The physical model of temperature field and thermal stress field are established in this paper, on which the numerical simulation with the assuming physical and laser milling parameters have been finished. The laser milling process can be explained.

Finite element analysis on temperature field and residual stress of welding assembly for I-beam and end-plate

Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperature Jbr verification purposes. Results show that the measured thermal cycle curves match well with the simulation result. Simulation results of welding residual stress indicate that the values of longitudinal and transverse stress on the upper surface of the plate are higher than the normal stress; higher tensile stresses exist at the end of the web weld toes and in the central area of the flange weld toes. The dangerous zones are located at the central areas of weld toes of the flange welds and near weld toes of the web welds.

Simulation Analysis on Temperature Field and Temperature Stress of Flexible Pavement in Cold Areas

In order to ensure the service life of pavement in cold areas, this paper simulates the temperature field and stress field of pavement at high temperature of 60˚C and low temperature of -30˚C based on ANSYS software, and analyzes the changing trend of temperature of each layer with time and the temperature stress caused by it using the time-incremental finite element method. The results show that when the temperature is higher than 0˚C, the temperature between layers of the structure and the surface temperature shows an increasing trend. On the contrary, when the temperature is lower than 0˚C, it shows a decreasing trend. The more drastic the temperature change is, the greater the temperature stress of the pavement will be, which is easy to cause road structure diseases. When the temperature difference of pavement reaches 90˚C, the change of temperature stress between layers of road structure has a significant effect on the daily evolution of pavement.

An extended cellular automata model with modified floor field for evacuation

The floor field model has been widely used in evacuation simulation research based on cellular automata model. However, conventional methods of setting floor field will lead to highly insufficient utilization of the exit area when people gather on one side of the exit. In this study, an extended cellular automata model with modified floor field is proposed to solve this problem. Additionally, a congestion judgment mechanism is integrated in our model, whereby people can synthetically judge the degree of congestion and distance in front of them to determine whether they need to change another exit to evacuate or not. We contrasted the simulation results of the conventional floor field model, the extended model proposed in this paper, and Pathfinder software in a same scenario. It is demonstrated that this extended model can ameliorate the problem of insufficient utilization of the exit area and the trajectory of pedestrian movement and the crowd shape of pedestrians in front of exit in this new model are more realistic than those of the other two models. The findings have implications for modeling pedestrian evacuation.

Evolution of residual stress field in 6N01 aluminum alloy friction stir welding joint

Based on the characteristics of friction stir welding( FSW) and Coulomb friction work theory,the residual stresses field of FSW joints of 6 N01 aluminum alloy( T5),which was used in high speed train,were calculated by using the ANSYS finite element software. During the FEM calculation,the dual heat source models namely the body heat source and surface heat source were used to explore the evolution law of the welding process to the residual stress field. The method of ultrasonic residual stress detecting was used to investigate the residual stresses field of the 6 N01 aluminum alloy FSW joints. The results show that the steady-state temperature of 6 N01 aluminum alloy during FSW is about 550 ℃,and the temperature mutates at the beginning and at end of welding. The longitudinal residual stress σ_x is the main stress,which fluctuates in the range of-25 to 242 MPa. Moreover,the stress in the range of shaft shoulder is tensile stress that the maximum tensile stress is 242 MPa,and the stress in the outside of shaft shoulder is compressive stress that the maximum compressive stress is 25 MPa. The distribution of the tensile stress in the welding nugget zone( WNZ) is obviously bimodal,and the residual stress on the advancing side is higher than that on the retreating side. With the increasing of the welding speed,the maximum temperature decreased and the maximum residual stress decreased when the pin-wheel speed kept constant. With the increasing of the pin-wheel speed,the maximum temperature of the joint increased and the maximum residual stress increased when the welding speed was constant. The experimental results were in good agreement with the finite element results.

Modeling in SolidWorks and analysis of temperature and thermal stress during construction of intake tower

With a focus on the intake tower of the Yanshan Reservoir, this paper discusses the method of modeling in the 3D CAD software SolidWorks and the interface processing between SolidWorks and the ANSYS code, which decreases the difficulty in modeling complicated models in ANSYS. In view of the function of the birth-death element and secondary development with APDL （ANSYS parametric design language）, a simulation analysis of the temperature field and thermal stress during the construction period of the intake tower was conveniently conducted. The results show that the temperature rise is about 29.934 ℃ over 3 or 4 days. The temperature differences between any two points are less than 24 ℃. The thermal stress increases with the temperature difference and reaches its maximum of 1.68 MPa at the interface between two concrete layers.

Evaluation of properties and thermal stress field for thermal barrier coatings

In order to get thermal stress field of the hot section with thermal barrier coating (TBCs), the thermal conductivity and elastic modulus of top-coat are the physical key properties. The porosity of top-coat was tested and evaluated under different high temperatures. The relationship between the microstructure (porosity of top-coat) and properties of TBCs were analyzed to predict the thermal properties of ceramic top-coat, such as thermal conductivity and elastic modulus. The temperature and stress field of the vane with TBCs were simulated using two sets of thermal conductivity data and elastic modulus, which are from literatures and this work, respectively. The results show that the temperature and stress distributions change with thermal conductivity and elastic modulus. The differences of maximum temperatures and stress are 6.5% and 8.0%, respectively.

AN IMPROVED HOLOGRAPHIC METHOD FOR THE DETERMINATION OF TEMPERATURE DISTRIBUTIONS AND THERMAL STRESSES

In this paper, a new method for getting the temperature and thestress fields is proposed. By this method, three pieces of information can berecorded in two holograms at the same time , when a two-dimensional photoe-lastic model is subjected to thermal loa

RESEARCH ON INFLUENCE OF TEMPERATURE ON A PRECISION FORGING PROCESS OF BLADE WITH A TENON

The blade precision forging process is a forming process with high temperature and large plastic deformation. Interaction of deformation and heat conduction leads to large uneven distribution of temperature. The unevenness of temperature distribution has a great effect on mechanical properties and the microstracture of materials. So it is necessary to consider the influence of temperature on the precision forging process of blades. Taking a blade with a tenon into consideration, a 3D mechanical model in precision forging is built up. The distribution laws of temperature field and the influence of the temperature on the equivalem stress in the process are obtained by using 3-D coupled thermo-mechanical FEM code developed by the authors Theresuits obtained illustrate that the influence of the temperature field on the blade forging process is considerable. The achievements of predicting microstructure and mechanical properties for forged blades is significant.

HYSTERESIS OF PHASE TRANSFORMATION TEMPERATURE IN NiTi SHAPE MEMORY ALLOY

The relationship between structure and hysteresis of phase transformation temperature in NiTi shape memory alloy has been investigated by means of TEM observation,positron an- nihilation and electrical resistivity measurement.The sequence of hysteresis for the alloy aged under different regimes was found to be:plate martensite>R-phase>tie-like martensite. The reversible displaeement of phase boundaries of these transformations is blocked by the co- herent stress field around Ti_(11)Ni_(14)phase particles.A linear relationship between S paramet- er of positron annihilation and maximum values of temperature hysteresis showed that the mismatch dislocation and elastic stress field established by Ti_(11)Ni_(14)phase precipitation are the main factor to determine the temperature hysteresis of phase transformation in NiTi shape memory alloy.

Magneto-Thermoelasticity with Thermal Shock Considering Two Temperatures and LS Model

The present investigation is intended to demonstrate the magnetic field,relaxation time,hydrostatic initial stress,and two temperature on the thermal shock problem.The governing equations are formulated in the context of Lord-Shulman theory with the presence of bodily force,two temperatures,thermal shock,and hydrostatic initial stress.We obtained the exact solution using the normal mode technique with appropriate boundary conditions.The field quantities are calculated analytically and displayed graphically under thermal shock problem with effect of external parameters respect to space coordinates.The results obtained are agreeing with the previous results obtained by others when the new parameters vanish.The results indicate that the effect of magnetic field and initial stress on the conductor temperature,thermodynamic temperature,displacement and stress are quite pronounced.In order to illustrate and verify the analytical development,the numerical results of temperature,displacement and stress are carried out and computer simulated results are presented graphically.This study helpful in the development of piezoelectric devices.

A cellular automata model with probability infection and spatial dispersion

In this article, we have proposed an epidemic model based on the probability cellular automata theory. The essential mathematical features are analysed with the help of stability theory. We have given an alternative modelling approach for the spatiotemporal system which is more realistic from the practical point of view. A discrete and spatiotemporal approach is shown by using cellular automata theory. It is interesting to note that both the size of the endemic equilibrium and the density of the individuals increase with the increase of the neighbourhood size and infection rate, but the infections decrease with the increase of the recovery rate. The stability of the system around the positive interior equilibrium has been shown by using a suitable Lyapunov function. Finally, experimental data simulation for SARS disease in China in 2003 and a brief discussion are given.

考虑恐慌情绪和信息传递的行人疏散模拟

为分析应急疏散过程中恐慌情绪和信息传递对行人疏散效率的影响,提出基于热传递原理的情绪感染模型和元胞自动机场域模型相结合的疏散模拟方法。该方法通过量化的恐慌值影响行人决策偏好,并引入信息扩散模型,修正成功接收到出口信息的人群的疏散路径,模拟研究恐慌情绪作用下行人受到信息引导后疏散行为的变化。研究结果表明:恐慌情绪感染主要出现在人群聚集时期,伴随恐慌的蔓延,整体疏散效率降低,且对小规模行人疏散影响效果更显著;随着危险源向出口靠近,恐慌情绪使行人做出非理性决策的可能性更大,导致出口处人群出现分散再聚集现象;有效的信息传递可以降低恐慌情绪影响、提高疏散出口利用率,且信息传递影响效果随疏散人数的减少和危险源向出口的靠近而有所增强。研究结果可为提升应急疏散效率提供理论支持。