Loading Stress Analysis of Cement Concrete Pavement in Mountainous Areas

The suitable cement concrete pavement for mountainous areas is a form of low-cost cement concrete pavement that uses unconventional graded stones in different proportions in ordinary concrete,allowing the concrete to fully contact the stones and form a stable and well-bonded slab with large particle stones.As large particle stones replace a certain volume of cement concrete,they have good economic performance and are a low-cost form of cement concrete pavement.This study researches the use of ANSYS tools to analyze the influence of geometric dimensions and material properties of rigid pavement structural layers on the mechanical properties of pavement structures.

In-site health monitoring of cement concrete pavements based on optical fiber sensing technology

Premature stress of cement concrete pavements i the coupled action of construction technique,structural ma-terial and environmental action.It is quite diffiault to accurately get the actual stress distribution merely based on the theoretical or simulation analysis.Ther efore,in-situ health monitoring is particularly si gnificant to obtain the stress or strain information for the assessment on structural perfor mance of cement concrete pavements.To contribute this topic,different kinds of FBG based sensors have been specially designed to measure the tem-perature,pressure and deformation in cement concrete pavements.A relatively long-term monitoring has been aonducted to collect the effective data after the solidification of the pavement lasts for about 15 d.Data analysis indicates that the temperature variation inside the pavement was very stable,with maximum ampltude smaller than 2.25°C in Sep.2020.The longitudinal,transverse and ver tical deformations of the pavement behaved in non-umniform distribution,and partial me asuring points suffered from large tensile force.The concrete course had better deformation resi stance than that of the soil base,and local interfacial micro void defects existed in the soil base.The preliminary results can help to understand the actual structural performance of cement concrete pavements based on the optical fiber sensing sys tem.

Study of interfacial transition zones between magnesium phosphate cement and Portland cement concrete pavement

The Portland cement concrete pavement(PCCP)often suffers from different environmental distresses and vehicle load failure,resulting in slab corner fractures,potholes,and other diseases.Rapid repair has become one of the effective ways to open traffic rapidly.In this study,a novel type of rapid repair material,basalt fiber reinforced polymer modified magnesium phosphate cement(BFPMPC),is used to rapidly repair PCCP.Notably,the mechanical properties and characteristics of the repair interfaces which are named interfacial transition zones(ITZs)formed by BFPMPC and cement concrete are focused on as a decisive factor for the performance of the rapid repair.The changing trend of the elastic moduli was studied by nanoindentation experiments in the ITZs with the deconvolution analysis that the elastic moduli of certain kinds of substances can be determined.The experimental results show that the elastic modulus of ITZ-1 with a width of about20μm can be regarded as 0.098 times of the aggregate,and 0.51 times of the ordinary Portland cement(OPC)mortar.The BFPMPC-OPC mortar ITZ has roughly the same mechanical properties as the ITZ between aggregate and BFPMPC.A multi-scale representative two-dimensional model was established by random aggregate and a two-dimensional extended finite element method(XFEM)to study the mechanical properties of the repair interface.The simulation results show that the ITZ formed by the interface of BFPMPC and OPC mortar and basalt aggregate is the most vulnerable to failure,which is consistent with the nano-indentation experimental results.

Test Study on the Recycled Aggregate and Concrete Regenerated from Worn Cement Concrete Pavement

Regenerate utilization of worn cement concrete is the key technical problem to be solved in traffic field while the cement concrete pavement built long ago durative disrepair. The study aimed at the worn cement concrete which can not be reused in site,get recycled aggregate according to the practically technics of regenerate,and then carry out test study on the aggregate and recycle aggregate cement concrete. Test results show recycled fine aggregate is about 26% of recycled aggregate,and substantive sand pulps are adhere on the surface of recycled while the distinct crackle appears on this sand pulp surface. relative to the natural aggregate,one of the remarkable characters of the recycled aggregate is that the inartificial water ratio is relatively low and the water-absorbing ratio can reach 4%～12%,and the water-absorbing ratio increased while the grain getting fine. the second remarkable characters of recycled coarse aggregate is that the weared stone value and crushed stone value of recycled coarse aggregate are both bigger,the Los-angeles weared stone value is 32.7,the crushed stone value is 26.5. So,the recycled aggregate can not meet the criterion,but after mixed into 40% natural aggregate,it can meet. The mixture ratio test results proved that based on the dosage of cement we can through reduce water cement ratio and augment water quantity to improve the working performance of recycled concrete. The destroy form of recycled concrete goes all the way with natural concrete,the recycled aggregate can absolutely used in cement concrete under C50.

Engineering Application and Development of Anti-skid Sand

In view of the increasing cement concrete pavement in China,the proportion of road non-slip surface layer is large,the winter slippery performance is insufficient and the later non-slip treatment is difficult. Through the concrete construction and post-application and development of the anti-skid sand in the road and bridge,the feasible anti-skid optimization measures are put forward.