This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a l...This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a lab scale thickener for dewatering of tailing in the flotation circuit.Four thickener operating variables,namely feed flowrate,solid percent,flocculant dosage and feedwell height were changed during the tests based on CCRD.The ranges of values of the thickener variables used in the design were a feed flowrate of 9–21 L/min,solid percent of 8%–20%,flocculant dosage of 1.25–4.25 g/t and feedwell height of 16–26 cm.A total of 30 thickening tests were conducted using lab scale thickener on flotation tailing obtained from the Sarcheshmeh copper mine,Iran.The underflow solid percent and bed height were expressed as functions of four operating parameters of thickener.Predicted values were found to be in good agreement with experimental values(R2values of 0.992 and 0.997 for underflow solid percent and bed height,respectively).This study has shown that the RSM and CCRD could effciently be applied for the modeling of thickener for dewatering of flotation tailing.展开更多
The conversion of rice hulls into fermentable saccharides was explored through steam pretreatment employing 2.5% SO_(2).The in teraction between temperature and time was assessed by means of the response surface metho...The conversion of rice hulls into fermentable saccharides was explored through steam pretreatment employing 2.5% SO_(2).The in teraction between temperature and time was assessed by means of the response surface method to achieve optimum contents of C6-sugars in water-insoluble solids(WIS)and C5-sugars in the liquor.Pretreatment carried out at 218℃ for 2.3 min released liquor containing 55.4 g/L of sugars(29.1 g/L of xylose).In parallel,the WIS was subjected to enzymatic saccharification using different solid and enzyme loads via an experimental design:assays using 22.0% WIS and 20.0 filter paper units(FPU)/g led to 90.6 g/L of glucose,corresponding to a yield of 86.4% and an overall yield of 72.4%.The data reported are the highest ever found for such raw material,making it attractive to compete with conventi on al lig no cellulosic biomass.展开更多
基金supported by the National Iranian Copper Industry Co.
文摘This study discussed the application of response surface methodology(RSM)and central composite rotatable design(CCRD)for modeling and optimization of the influence of some operating variables on the performance of a lab scale thickener for dewatering of tailing in the flotation circuit.Four thickener operating variables,namely feed flowrate,solid percent,flocculant dosage and feedwell height were changed during the tests based on CCRD.The ranges of values of the thickener variables used in the design were a feed flowrate of 9–21 L/min,solid percent of 8%–20%,flocculant dosage of 1.25–4.25 g/t and feedwell height of 16–26 cm.A total of 30 thickening tests were conducted using lab scale thickener on flotation tailing obtained from the Sarcheshmeh copper mine,Iran.The underflow solid percent and bed height were expressed as functions of four operating parameters of thickener.Predicted values were found to be in good agreement with experimental values(R2values of 0.992 and 0.997 for underflow solid percent and bed height,respectively).This study has shown that the RSM and CCRD could effciently be applied for the modeling of thickener for dewatering of flotation tailing.
基金supported by Coordination for the Improvement of Higher Education Personnel Foundation,Mmistry of Education in Brazil(Grant No.POS-DOC-88881.170076/2018-01).
文摘The conversion of rice hulls into fermentable saccharides was explored through steam pretreatment employing 2.5% SO_(2).The in teraction between temperature and time was assessed by means of the response surface method to achieve optimum contents of C6-sugars in water-insoluble solids(WIS)and C5-sugars in the liquor.Pretreatment carried out at 218℃ for 2.3 min released liquor containing 55.4 g/L of sugars(29.1 g/L of xylose).In parallel,the WIS was subjected to enzymatic saccharification using different solid and enzyme loads via an experimental design:assays using 22.0% WIS and 20.0 filter paper units(FPU)/g led to 90.6 g/L of glucose,corresponding to a yield of 86.4% and an overall yield of 72.4%.The data reported are the highest ever found for such raw material,making it attractive to compete with conventi on al lig no cellulosic biomass.
