Two-dimensional(2D)flume experiments are useful in investigating the performances of floating breakwaters(FBs),including hydrodynamic performances,motion responses,and mooring forces.Designing a reasonable gap between...Two-dimensional(2D)flume experiments are useful in investigating the performances of floating breakwaters(FBs),including hydrodynamic performances,motion responses,and mooring forces.Designing a reasonable gap between the flume wall and the FBs is a critical step in 2D flume tests.However,research on the effect of the gap on the accuracy of 2D FB experimental results is scarce.To address this issue,a numerical wave tank is developed using CFD to estimate the wave-FB interaction of a moored dual-cylindrical FB,and the results are compared to experimental data from a previously published work.There is good agreement between them,indicating that the numerical model is sufficiently accurate.The numerical model is then applied to explore the effect of gap diffraction on the performance of FBs in2D experiments.It was discovered that the nondimensional gap length L_(Gap)/W_(Pool)should be smaller than 7.5%to ensure that the relative error of the transmission coefficient is smaller than 3%.The influence of the gap is also related to the entering wave properties,such as the wave height and period.展开更多
It has been reported that the ply gap influences the ballistic resistance of spaced multi-ply fabric systems,but its working mechanism was not well-understood. This paper reports the experimental and numerical approac...It has been reported that the ply gap influences the ballistic resistance of spaced multi-ply fabric systems,but its working mechanism was not well-understood. This paper reports the experimental and numerical approaches and results of an investigation on the mechanisms that enable the improved ballistic performance of spaced multi-ply systems. Penetration tests were performed over a range of impact velocities ranging from 200 m/s to 400 m/s. The results confirmed that the ply gap is beneficial to the energy absorption capability of the systems. This is because the front plies tend to absorb more energy when they are not immediately constrained by the rear plies. During a ballistic event, the gap relieves the reflection of the compressive pulse, prolonging the projectile engagement time with the front plies;on the other hand, the rear plies become increasingly less active in dissipating energy as the gap increases.When the gap is sufficiently widened to avoid any interference between the plies before the failure of the front ply, the responses of the whole system no longer vary. It was also found that the ballistic performance of the spaced systems is influenced by ply thickness, impact velocity, and the stacking order of the ply gap.展开更多
The bench top test is one of the most important and effective methods to evaluate the total thermal protective performance(TPP) of firefighters' protective clothing,which is greatly influenced by the air gaps entr...The bench top test is one of the most important and effective methods to evaluate the total thermal protective performance(TPP) of firefighters' protective clothing,which is greatly influenced by the air gaps entrapped.In this paper,to investigate the effect of air gap width on TPP,a new improved apparatus with two height changeable buttons to hold the thermal sensor was developed to get a series of air gap sizes from 0 mm to 40 mm.The TPP of two types of flame-resistant outer fabrics was measured with TPP test apparatus respectively.Analysis of temperature rise with each air gap width was made to determine the effects of different air gaps on protective performance.It was indicated that air gap size had great effect on TPP of fabrics in the bench top test.An air gap width above 8 mm was suggested for the thermal protective clothing design.展开更多
The temperature dependence of some performance of 6H SiC unipolar power devices is analyzed theoretically.By employing the temperature dependent ionization coefficient and mobility of a silicon carbide,the analytica...The temperature dependence of some performance of 6H SiC unipolar power devices is analyzed theoretically.By employing the temperature dependent ionization coefficient and mobility of a silicon carbide,the analytical expressions of the temperature dependent performance,such as breakdown characteristics and on resistance of 6H SiC unipolar power devices are derived in a closed form.The analytical results are compared with the experimental results,with good accordance found in the breakdown characteristics.展开更多
Previous literature show that auditors and the public have different understandings and beliefs about the auditor’s responsibilities.The public’s expectation of statutory audit may exceed the responsibility required...Previous literature show that auditors and the public have different understandings and beliefs about the auditor’s responsibilities.The public’s expectation of statutory audit may exceed the responsibility required by the auditing standard,which leads to the audit expectation gap.Since the 1980s,there are more and more criticisms on statutory auditors especially after the appearance of some auditing fraud such as Enron case in the United States and Maxwell’s case in the United Kingdom.The misunderstanding from the public makes the auditor face more and more challenges.The purpose of this paper is to discuss the components of the gap,and discuss the main reasons based on the existing literature and cases.This paper makes a critical evaluation of the audit expectation gap from three parts:performance gap,standard gap,and reasonableness gap,respectively.展开更多
基金financially supported by China National Funds for Distinguished Young Scientists(Grant No.52025112)the Key Projects of the National Natural Science Foundation of China(Grant No.52331011)。
文摘Two-dimensional(2D)flume experiments are useful in investigating the performances of floating breakwaters(FBs),including hydrodynamic performances,motion responses,and mooring forces.Designing a reasonable gap between the flume wall and the FBs is a critical step in 2D flume tests.However,research on the effect of the gap on the accuracy of 2D FB experimental results is scarce.To address this issue,a numerical wave tank is developed using CFD to estimate the wave-FB interaction of a moored dual-cylindrical FB,and the results are compared to experimental data from a previously published work.There is good agreement between them,indicating that the numerical model is sufficiently accurate.The numerical model is then applied to explore the effect of gap diffraction on the performance of FBs in2D experiments.It was discovered that the nondimensional gap length L_(Gap)/W_(Pool)should be smaller than 7.5%to ensure that the relative error of the transmission coefficient is smaller than 3%.The influence of the gap is also related to the entering wave properties,such as the wave height and period.
基金supported by the National Natural Science Foundation of China (Grant Nos. 51708553, 12202498, 52371299,12302187)Natural Science Foundations of Jiangsu Province (Grant No. BK20210438)Knowledge Innovation Program of WuhanShuguang Project (Grant No. 202201080102)。
文摘It has been reported that the ply gap influences the ballistic resistance of spaced multi-ply fabric systems,but its working mechanism was not well-understood. This paper reports the experimental and numerical approaches and results of an investigation on the mechanisms that enable the improved ballistic performance of spaced multi-ply systems. Penetration tests were performed over a range of impact velocities ranging from 200 m/s to 400 m/s. The results confirmed that the ply gap is beneficial to the energy absorption capability of the systems. This is because the front plies tend to absorb more energy when they are not immediately constrained by the rear plies. During a ballistic event, the gap relieves the reflection of the compressive pulse, prolonging the projectile engagement time with the front plies;on the other hand, the rear plies become increasingly less active in dissipating energy as the gap increases.When the gap is sufficiently widened to avoid any interference between the plies before the failure of the front ply, the responses of the whole system no longer vary. It was also found that the ballistic performance of the spaced systems is influenced by ply thickness, impact velocity, and the stacking order of the ply gap.
基金National Natural Science Foundation of China (No. 50876019)the Research Fund for the Doctoral Program of Higher Education of China (No. 200802550009)Fundamental Research Funds for the Central Universities,China
文摘The bench top test is one of the most important and effective methods to evaluate the total thermal protective performance(TPP) of firefighters' protective clothing,which is greatly influenced by the air gaps entrapped.In this paper,to investigate the effect of air gap width on TPP,a new improved apparatus with two height changeable buttons to hold the thermal sensor was developed to get a series of air gap sizes from 0 mm to 40 mm.The TPP of two types of flame-resistant outer fabrics was measured with TPP test apparatus respectively.Analysis of temperature rise with each air gap width was made to determine the effects of different air gaps on protective performance.It was indicated that air gap size had great effect on TPP of fabrics in the bench top test.An air gap width above 8 mm was suggested for the thermal protective clothing design.
文摘The temperature dependence of some performance of 6H SiC unipolar power devices is analyzed theoretically.By employing the temperature dependent ionization coefficient and mobility of a silicon carbide,the analytical expressions of the temperature dependent performance,such as breakdown characteristics and on resistance of 6H SiC unipolar power devices are derived in a closed form.The analytical results are compared with the experimental results,with good accordance found in the breakdown characteristics.
文摘Previous literature show that auditors and the public have different understandings and beliefs about the auditor’s responsibilities.The public’s expectation of statutory audit may exceed the responsibility required by the auditing standard,which leads to the audit expectation gap.Since the 1980s,there are more and more criticisms on statutory auditors especially after the appearance of some auditing fraud such as Enron case in the United States and Maxwell’s case in the United Kingdom.The misunderstanding from the public makes the auditor face more and more challenges.The purpose of this paper is to discuss the components of the gap,and discuss the main reasons based on the existing literature and cases.This paper makes a critical evaluation of the audit expectation gap from three parts:performance gap,standard gap,and reasonableness gap,respectively.
