EFFECTS OF SPLITTER BLADES ON THE LAW OF INNER FLOW WITHIN CENTRIFUGAL PUMP IMPELLER

Analysis on the inner flow field of a centrifugal pump impeller with splitter blades is carfled out by numerical simulation. Based on this analysis, the principle of increasing pump head and efficiency are discussed. New results are obtained from the analysis of turbulence kinetic energy and relative velocity distribution： Firstly, unreasonable length or deviation design of the splitter blades may cause great turbulent fluctuation in impeller channel, which has a great effect on the stability of impeller outlet flow; Secondly, it is found that the occurrence of flow separation can be decreased or delayed with splitter blades from the analysis of blade loading; Thirdly, the effect of splitter blades on reforming the structure of ＂jet-wake＂ is explained from the relative velocity distribution at different flow cross-sections, which shows the flow process in the impeller. The inner flow analysis verifies the results of performance tests results and the PIV test.

Numerical Experiment of the Solid Particle Erosion of Bionic Configuration Blade of Centrifugal Fan

In this paper, a bionic method was presented to improve the erosion resistance of blade of the centrifugal fan. A numerical investigation of the solid particle erosion on the standard and bionic configuration blade of 4-72N_o10C centrifugal fan was presented. The numerical study employs computational fluid dynamics （CFD） software, based on a finite volume method, in which the discrete phase model was used to modele the solid particles flow, and the Eulerian conservation equation was adopt to simulate the continuous phase. Moreover, user-defined function was used to define wear equation. The various diameters of the particles were taken into account. The positions of collision of standard and bionic fan blades were discussed, and two kinds of centrifugal fan blade wear were compared. The results show that the particles from the incident source with different positions have different processes of turning and movement when enter into the impeller. The trajectories of flow in the fan channel are significantly different for the particles with different diameters. Bionic fan blade have lower erosion rate than the standard fan blade when the particle size is 20 μm. The anti-erosion mechanism of the bionic fan blade was discussed.

Unsteady flow structures in the tip region for a centrifugal compressor impeller before rotating stall

To get an insight into the occurrence and the mechanism of flow unsteadiness in the tip region of centrifugal compressor impellers, the flow in Krain’s impeller is investigated by using both steady and unsteady RANS solver techniques. It is found that the flow unsteadiness on the pressure side is much stronger than that on the suction side. The periodical frequency of the unsteady flow is around half of the blade passing frequency. The originating mechanism of the flow unsteadiness is illustrated with the time-dependent tip leakage flow and blade loading at the tip region. Due to the blockage caused by the joint effects of broken-downed tip leakage vortex, separated fluids and tip leakage flow at downstream, a low pressure region is formed on the pressure side, consequently the blade loadings is altered. In turn, the changed blade loadings will alter the intensity of tip leakage flow. Such alternative behavior finally results in the periodic process. By comparing the calculated flow field in the cases of single-passage and four-passage models, it is confirmed that the investigated flow unsteadiness is confined in each single passage, as no phase differences are found in the model of four passages. This is different from the situation in axial compressor when the rotating instability is encountered. The flow unsteadiness only occurs at the working conditions with small mass flow rates, and the oscillation intensity will be enhanced with the decrease of mass flow rate. When the mass flow rate is too small, the flow unsteadiness in a single passage may trigger rotating stall, as the disturbance propagates in the circumferential direction.

Erosion-Resistant Surfaces Inspired by Tamarisk

Tamarisk, a plant that thrives in arid and semi-arid regions, has adapted to blustery conditions by evolving extremely ef- fective and robust anti-erosion surface patterns. However, the details of these unique properties and their structural basis are still unexplored. In this paper, we demonstrate that the tamarisk surface only suffers minor scratches under wind-sand mixture erosion. The results show that the anti-erosion property of bionic sample, inspired by tamarisk surface with different surface morphologies, can be attributed to the flow rotating in the grooves that reduces the particle impact speed. Furthermore, the simulation and experiment on the erosion wear behavior of the bionic samples and bionic centrifugal fan blades show that the bionic surface with V-type groove exhibits the best erosion resistance. The bionic surface on centrifugal fan blades with opti- mum parameters can effectively improve anti-erosion property by 28.97%. This paper show more opportunities for bionic application in improving the anti-erosion performance of moving parts that work under dirt and sand particle environment, such as helicopter rotor blades, airplane propellers, rocket motor nozzles, and pipes that regularly wear out from erosion.