The possibility of using a centrifugal-gravity concentrator to reject Mg-bearing minerals and minimize metal losses in the flotation of base metals was evaluated. Sample characterization, batch scoping tests, pilot-sc...The possibility of using a centrifugal-gravity concentrator to reject Mg-bearing minerals and minimize metal losses in the flotation of base metals was evaluated. Sample characterization, batch scoping tests, pilot-scale tests, and regrind-flotation tests were conducted on a Ni flotation tailings stream. Batch tests revealed that the Mg grade decreased dramatically in the concentrate products. Pilot-scale testing of a continuous centrifugal concentrator（Knelson CVD6） on the flotation tailings revealed that a concentrate with a low mass yield, low Mg content, and high Ni upgrade ratio could be achieved. Under optimum conditions, a concentrate at 6.7% mass yield was obtained with 0.85% Ni grade at 12.9% Ni recovery and with a low Mg distribution（1.7%）. Size partition curves demonstrated that the CVD also operated as a size classifier, enhancing the rejection of talc fines. Overall, the CVD was capable of rejecting Mg-bearing minerals. Moreover, an opportunity exists for the novel use of centrifugal-gravity concentration for scavenging flotation tailings and/or after comminution to minimize amount of Mg-bearing minerals reporting to flotation.展开更多
This study used specularite, a high-gradient magnetic separation concentrate, as a raw material in reverse flotation.An iron concentrate with a grade of 65.1 wt% and a recovery rate of 75.31% were obtained.A centrifug...This study used specularite, a high-gradient magnetic separation concentrate, as a raw material in reverse flotation.An iron concentrate with a grade of 65.1 wt% and a recovery rate of 75.31% were obtained.A centrifugal concentrator served as the deep purification equipment for the preparation of iron oxide red pigments, and its optimal rotating drum speed, feed concentration, and other conditions were determined.Under optimal conditions, a high-purity iron oxide concentrate with a grade of 69.38 wt% and a recovery rate of 80.89% were obtained and used as a raw material for preparing iron oxide red pigment.Calcining with sulfuric acid produced iron red pigments with different hues.Simultaneously, middlings with a grade of 60.20 wt% and a recovery rate of 17.51% were obtained and could be used in blast furnace ironmaking.High-value utilization of specularite beneficiation products was thus achieved.展开更多
文摘The possibility of using a centrifugal-gravity concentrator to reject Mg-bearing minerals and minimize metal losses in the flotation of base metals was evaluated. Sample characterization, batch scoping tests, pilot-scale tests, and regrind-flotation tests were conducted on a Ni flotation tailings stream. Batch tests revealed that the Mg grade decreased dramatically in the concentrate products. Pilot-scale testing of a continuous centrifugal concentrator（Knelson CVD6） on the flotation tailings revealed that a concentrate with a low mass yield, low Mg content, and high Ni upgrade ratio could be achieved. Under optimum conditions, a concentrate at 6.7% mass yield was obtained with 0.85% Ni grade at 12.9% Ni recovery and with a low Mg distribution（1.7%）. Size partition curves demonstrated that the CVD also operated as a size classifier, enhancing the rejection of talc fines. Overall, the CVD was capable of rejecting Mg-bearing minerals. Moreover, an opportunity exists for the novel use of centrifugal-gravity concentration for scavenging flotation tailings and/or after comminution to minimize amount of Mg-bearing minerals reporting to flotation.
基金jointly funded by the National Natural Science Foundation of China (No.51304181)the Key Research Program of Frontier Sciences of Chinese Academy of Sciences (No.QYZDJ-SSW-JSC021)the Key Research Program of Chinese Academy of Sciences (No.ZDRW-ZS-2018-1)。
文摘This study used specularite, a high-gradient magnetic separation concentrate, as a raw material in reverse flotation.An iron concentrate with a grade of 65.1 wt% and a recovery rate of 75.31% were obtained.A centrifugal concentrator served as the deep purification equipment for the preparation of iron oxide red pigments, and its optimal rotating drum speed, feed concentration, and other conditions were determined.Under optimal conditions, a high-purity iron oxide concentrate with a grade of 69.38 wt% and a recovery rate of 80.89% were obtained and used as a raw material for preparing iron oxide red pigment.Calcining with sulfuric acid produced iron red pigments with different hues.Simultaneously, middlings with a grade of 60.20 wt% and a recovery rate of 17.51% were obtained and could be used in blast furnace ironmaking.High-value utilization of specularite beneficiation products was thus achieved.
