Effect of nozzle inlet parameters on the dry granulation atomization process of Si_(3)N_(4) ceramic bearing balls

In this paper,the atomization characteristics of Si3N4 ceramic dry granulation affect the performance of Si3N4 ceramic bearing balls.In order to improve the dry granulation characteristics and the comprehensive performance of Si3N4 ceramic bearing balls,the atomization mechanism of the spinning nozzle used for Si3N4 dry granulation was studied in detail.The interaction between air and binder in the pressure-swirl nozzle is analyzed based on VOF method,the modified realizable k−εturbulence model is used to simulate the flow field inside and outside the pressure-swirl nozzle,the effects of nozzle inlet parameters including the number of tangential inlets and the deflection angle of tangential inlets on the binder volume fraction,velocity distribution and pressure distribution are analyzed.The results show that when the number of tangential inlets increases from 1 to 4,the swirl strength of gas–liquid two-phase in the nozzle increases,the mean diameter of air core increases from 1.51 mm to 2.01 mm,and the spray cone angle increases from 18.5◦to 26.4◦.Besides,when the deflection angle of tangential inlet increases from 0◦to 15◦,the swirl strength of gas–liquid two-phase in the nozzle with the deflection angle of tangential inlet of 10◦is the largest,and the mean diameter of air core and spray cone angle is 3.04 mm and 30.7◦,respectively.Based on the atomization experiment platform of the electric control fuel system,the mean diameter of air core and spray cone angle are measured,the micromorphology of Si3N4 particles is observed,which verifies the correctness of numerical simulation.When the Si3N4 particles are prepared by dry granulation,taking the atomization performance of nozzle into consideration,the pressure-swirl nozzle with 4 tangential inlets and 10◦deflection angle should be selected.

Research on the Critical Speed of a Mixed-Flow Turbocharger with Hybrid Ceramic Ball Bearing

The critical speeds for a vehicle turbocharger with hybrid ceramic ball bearing are researched. The ball bearing-rotor system produces resonance when it working in critical speed and that makes the turbocharger injury working for a long time. The calculation and analysis methods of the critical speed for the vehicle turbocharger are described. The critical speed is computed by two methods including Riccati transfer matrix and DyRoBeS finite element method for a vehicle turbocharger with hybrid ceramic ball bearing. The vibration experiment had been taken to validate the calculating result, Comparison between the results by two calculation methods and the test results show that the first critical speed differences are 6.47 % and 5.66 %, the second critical speed differences are 2.87 % and 2.94 % respectively. And then, the primary factors which influence the critical speed are analyzed, the conclusions will be helpful for the vehicle turbocharger bearing-rotor system design.

ZERO TRANSMISSION AND ITS APPLICATION IN HIGH SPEED CNC MACHINE TOOLS

In order to realize high speed machining,the special requirements for the transmission and sturctrue of CNC machine tool have to be satisfied.A high speed spindle unit driven by a built-in motor is developed.An oil-water heat exchange system is used for cooling the spindle motor.The spindle is supported by Si_4N_3 ceramic ball angular contact bearings. An oil-air lubricator is used to lubricate and cool the spindle bearings.Some special structures are taken for balancing the spindle.