The synthesis of ultrafine cerium dioxide precursor via homogeneous precipitation was studied. Mixed aqueous solution of anhydrous cerium nitrate and urea was first heated to 85℃ for 2 h, and the prepared suspension ...The synthesis of ultrafine cerium dioxide precursor via homogeneous precipitation was studied. Mixed aqueous solution of anhydrous cerium nitrate and urea was first heated to 85℃ for 2 h, and the prepared suspension was then aged at room temperature for various periods of time. White precipitate was finally collected by centrifuging and washed with distilled water and anhydrous ethanol. The obtained cerium dioxide (CeO2) precursor was observed with SEM. It was found that the morphology and size of the precursor were strongly affected by aging time and stirring conditions (with or without stirring). The precipitated fine spherical particles of the precursor changed their shape from ellipse to slice or directly to slice. Fine spherical monodispersed (300 nm) precursor powders could be obtained by controlling the aging time. Stirring the solution also could change the reaction process and thus the morphology and size of the precursor were changed.展开更多
The catalyst screening tests for carbon dioxide oxidative coupling of methane (CO2-OCM) have been investigated over ternary and binary metal oxide catalysts. The catalysts are prepared by doping MgO- and CeO2-based so...The catalyst screening tests for carbon dioxide oxidative coupling of methane (CO2-OCM) have been investigated over ternary and binary metal oxide catalysts. The catalysts are prepared by doping MgO- and CeO2-based solids with oxides from alkali (Li2O), alkaline earth (CaO), and transition metal groups (WO3 or MnO). The presence of the peroxide (O2-2) active sites on the Li2O2, revealed by Raman spectroscopy, may be the key factor in the enhanced performance of some of the Li2O/MgO catalysts. The high reducibility of the CeO2 catalyst, an important factor in the CO2-OCM catalyst activity, may be enhanced by the presence of manganese oxide species. The manganese oxide species increases oxygen mobility and oxygen vacancies in the CeO2 catalyst. Raman and Fourier Transform Infra Red (FT-IR) spectroscopies revealed the presence of lattice vibrations of metal-oxygen bondings and active sites in which the peaks corresponding to the bulk crystalline structures of Li2O, CaO, WO3 and MnO are detected. The performance of 5%MnO/15%CaO/CeO2 catalyst is the most potential among the CeO2-based catalysts, although lower than the 2%Li2O/MgO catalyst. The 2%Li2O/MgO catalyst showed the most promising C2+ hydrocarbons selectivity and yield at 98.0% and 5.7%, respectively.展开更多
CeO2/ZnO nanocatalysts were prepared from the coupling route of homogeneous precipita-tion with microemulsion and the impregnation method. The catalytic performance of these two kinds of catalysts on the oxidative cou...CeO2/ZnO nanocatalysts were prepared from the coupling route of homogeneous precipita-tion with microemulsion and the impregnation method. The catalytic performance of these two kinds of catalysts on the oxidative coupling of methane with carbon dioxide was tested and compared; the frac-tal behavior of the nanocatalysts was analyzed using fractal theory. The CeO2/ZnO nanocatalysts had much higher activity than the catalysts prepared by impregnation method. There was no regular relation-ship between the average size of CeO2/ZnO nanocatalysts and their catalytic performance; however, the conversion of methane increased with the increase of the fractal dimension of CeO2/ZnO nanocatalysts.展开更多
The structure and catalytic desulfurization characteristics of CeO2-TiO2 mixed oxides were investigated by means ofX-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and catalytic activity tests. Acco...The structure and catalytic desulfurization characteristics of CeO2-TiO2 mixed oxides were investigated by means ofX-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and catalytic activity tests. According to the results, a CeO2-TiO2solid solution is formed when the mole ratio of cerium to titanium n（Ce）：n（Ti） is 5：5 or greater, and the most suitable n（Ce）：n（Ti） isdetermined as 7：3, over which the conversion rate of SO2 and the yield of sulfur at 500℃ reach 93% and 99%, respectively.According to the activity testing curve, Ce0.7Ti0.3O2 （n（Ce）：n（Ti）=7：3） without any pretreatment can be gradually activated by reagentgas after about 10 min, and reaches a steady activation status 60 min later. The XPS results of Ce0.7Ti0.3O2 after different time ofSO2＋CO reaction show that CeO2 is the active component that offers the redox couple Ce4＋/Ce3＋ and the labile oxygen vacancies, andTiO2 only functions as a catalyst structure stabilizer during the catalytic reaction process. After 48 h of catalytic reaction at 500℃,Ce0.7Ti0.3O2 still maintains a stable structure without being vulcanized, demonstrating its good anti-sulfur poisoning performance.展开更多
Homogenous precipitation and subsequent calcination has been used tosynthesize ultrafine ceria from cerium nitrate and urea solution. The ceria calcined from theprecursor inherit the size and morphology of it. The siz...Homogenous precipitation and subsequent calcination has been used tosynthesize ultrafine ceria from cerium nitrate and urea solution. The ceria calcined from theprecursor inherit the size and morphology of it. The size and morphology of the precursor areclosely related to the preparation process. The morphology, size and distribution of the precursorcould be tailored by changing the reaction condition and the ageing time. Monodispersed 200 nm sizedspherical particles is prepared by this method. The powder is used in the chemical-mechanicalpolishing of Si wafer. The average surface roughness of the polished Si wafer is 0.171 nm measuredby AFM.展开更多
A cerium-triethanolamine complex was obtained by the reaction of cerium(III) nitrate and triethanolamine in ethanol solution. Spontaneous oxidation of cerium(III) to cerium(IV) by oxygen occurred during the reaction. ...A cerium-triethanolamine complex was obtained by the reaction of cerium(III) nitrate and triethanolamine in ethanol solution. Spontaneous oxidation of cerium(III) to cerium(IV) by oxygen occurred during the reaction. The complex was crystalline and soluble in water. Nanosized ceria (CeO2) particles could be prepared via hydrolysis of the complex in aqueous solution, and the extent of agglomeration of particles increased with the increase in temperature for hydrolysis. Under the low temperature of 25 oC, mon...展开更多
A series of catalysts were prepared by doping different loadings of CeO2 over TiO2-SiO2-WO3 and used for the selective catalytic reduction of NOx by NH3. The experimental results showed that the selective catalytic re...A series of catalysts were prepared by doping different loadings of CeO2 over TiO2-SiO2-WO3 and used for the selective catalytic reduction of NOx by NH3. The experimental results showed that the selective catalytic reduction（SCR） performance and SO2-resistant ability of TiO2-SiO2-WO3 were greatly enhanced by the introduction of cerium. The catalyst containing 10% CeO2 showed the highest NO conversion in a wide temperature range and good N2 selectivity with broad operation temperature window at the gas hourly space velocity（GHSV） of 30000 h–1, which was a very promising catalyst for NOx abatement from diesel engine exhaust. The catalysts were characterized by X-ray diffraction（XRD）, scanning electron microscopy with energy dispersive X-ray spectroscopy（SEM-EDS）, N2 adsorption-desorption（BET） and X-ray photoelectron spectroscopy（XPS）. The characterization results showed that the bigger pore radius, higher surface atomic concentration and dispersion of Ce and the abundant adsorbed oxygen on the surface of catalyst contributed to the best NH3-SCR performance of CeO2/TiO2-SiO2-WO3 catalyst containing 10% CeO2.展开更多
The deposition of NH4 HSO4 and the poisoning effect of SO2 on SCR catalyst are the main obstacles that restrict the industrial application of CeO2-doped SCR catalysts.In this work,deposited NH4 HSO4 decomposition beha...The deposition of NH4 HSO4 and the poisoning effect of SO2 on SCR catalyst are the main obstacles that restrict the industrial application of CeO2-doped SCR catalysts.In this work,deposited NH4 HSO4 decomposition behavior and SO2 poisoning over V2 O5-MoO3/TiO2 catalysts modified with CeO2 and SiO2 were investigated.By the means of characterization analysis,it was found that the addition of SiO2 into VMo/Ti-Ce had an impact on the interaction existed between catalyst surface atoms and NH4 HSO4.Temperatureprogrammed methods and in situ diffused reflectance infrared Fourier transform spectroscopy(DRIFTS)experiments indicated that the doping of SiO2 promoted the decomposition of deposited NH4 HSO4 on VMo/Ti-Ce catalyst surface by reducing the thermal stability of NH4 HSO4 and enhancing the NH4 HSO4 reactivity with NO in low temperature.And this improvement may be the reason for the better catalytic activity than VMo/Ti-Ce in the case of NH4 HSO4 deposition.Accompanied with cerium sulfate species generated over catalyst surface,the conversion of SO2 to SO3 was inhibited in SiCe mixed catalyst.The addition of SiO2 could promote the decomposition of cerium sulfate,which may be a potential strategy to enhance the resistance of SO2 poisoning over CeO2-modifed catalysts.展开更多
The Mn-doped Ce02 nanopowders with high catalysis activity were successfully fabricated through a simple hydrolyzed-oxidized approach. Firstly, the alloy Ce37Mnl 8C45 was prepared in vacuum induction melting furnace. ...The Mn-doped Ce02 nanopowders with high catalysis activity were successfully fabricated through a simple hydrolyzed-oxidized approach. Firstly, the alloy Ce37Mnl 8C45 was prepared in vacuum induction melting furnace. Subsequently, Mn-doped CeO2 nanopowders with 142 m2/g of specific surface area were obtained through a simple hydrolyzed-oxidized procedure of the alloy Those nanopowders were heat treated at different temperatures. The obtained materials were characterized by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, high-resolution transmission electron microscopy （HRTEM） and energy dispersive spectroscopy （EDS）. And the catalytic activity on vinyl chloride （VC） emission combustion was investigated. The results showed that those nanopowders after hydrolyzed-oxidized from Ce37Mn18C45 mainly consisted of CeO2 and Mn304. Manganese element increased the thermal stability of CeO2 nanopowders. The Mn-doped CeO2 nanopowders had three morphologies. Small particles were Mn-doped CeO2, square particles were Mn304 and the rods were Mn304 and Mn203. The Mn-doped CeO2 nanopowders had good vinyl chloride （VC） emission catalytic performance.展开更多
The influences of H2O and SO2 on CeO2/TiO2 monolith catalyst for the selective catalytic reduction（SCR） of NOx with NH3 were investigated. In the absence of SO2, H2O inhibited the SCR activity, which might be ascrib...The influences of H2O and SO2 on CeO2/TiO2 monolith catalyst for the selective catalytic reduction（SCR） of NOx with NH3 were investigated. In the absence of SO2, H2O inhibited the SCR activity, which might be ascribed to the competitive adsorption of H2O and reactants such as NH3 and/or NOx. SO2 could promote the SCR activity of CeO2/TiO2 monolith catalyst in the absence of H20, while in the presence of H20 it speeded the deactivation. During the SCR reaction in SO2-containing gases, Ce（Ⅲ） sulfate species formed on the catalyst surface, resulting in the en- hancement of Bronsted acidity. This played a significant role in the enhanced SCR activity. However, in the presence of both H2O and SO2, a large amount of ammonium-sulfate salts formed on the catalyst surface, which resulted in the blocking of catalyst pores and deactivated the catalyst. In addition, the NOx conversion was more sensitive to gas hourly space velocity in the presence of H20 than in the absence of H20. The relatively high space velocity would result in a higher formation rate of ammonium-sulfate salts on per unit catalyst in the presence of H2O and SO2, which caused obvious deactivation of Ce/TiO2 monolith catalyst.展开更多
Cl-containing cerium dioxide(Ce O2) catalysts have been found to exhibit unique catalytic activities. In the present work, using density functional theory calculations with the inclusion of on-site Coulomb correction,...Cl-containing cerium dioxide(Ce O2) catalysts have been found to exhibit unique catalytic activities. In the present work, using density functional theory calculations with the inclusion of on-site Coulomb correction, we systematically studied the effect of Cl on the physicochemical properties of Ce O2 surfaces by substituting one subsurface O with Cl. The calculated results show that substituting an O atom with a Cl atom results in structural distortion and the reduction of one surface Ce4+ cation to Ce3+. The protruding Ce3+ cation greatly improves the adsorption energy of O2 to produce an active O2- species, and maintains the catalytic oxidation cycle of CO on Ce O2(110). These results may help us obtain a better understanding of Cl-ceria interacting systems and provide some guidance for the design of effective Ce O2-based catalysts.展开更多
基金the Natural Science Foundation of Jiangsu Province under pro ject No.BK2002010.
文摘The synthesis of ultrafine cerium dioxide precursor via homogeneous precipitation was studied. Mixed aqueous solution of anhydrous cerium nitrate and urea was first heated to 85℃ for 2 h, and the prepared suspension was then aged at room temperature for various periods of time. White precipitate was finally collected by centrifuging and washed with distilled water and anhydrous ethanol. The obtained cerium dioxide (CeO2) precursor was observed with SEM. It was found that the morphology and size of the precursor were strongly affected by aging time and stirring conditions (with or without stirring). The precipitated fine spherical particles of the precursor changed their shape from ellipse to slice or directly to slice. Fine spherical monodispersed (300 nm) precursor powders could be obtained by controlling the aging time. Stirring the solution also could change the reaction process and thus the morphology and size of the precursor were changed.
文摘The catalyst screening tests for carbon dioxide oxidative coupling of methane (CO2-OCM) have been investigated over ternary and binary metal oxide catalysts. The catalysts are prepared by doping MgO- and CeO2-based solids with oxides from alkali (Li2O), alkaline earth (CaO), and transition metal groups (WO3 or MnO). The presence of the peroxide (O2-2) active sites on the Li2O2, revealed by Raman spectroscopy, may be the key factor in the enhanced performance of some of the Li2O/MgO catalysts. The high reducibility of the CeO2 catalyst, an important factor in the CO2-OCM catalyst activity, may be enhanced by the presence of manganese oxide species. The manganese oxide species increases oxygen mobility and oxygen vacancies in the CeO2 catalyst. Raman and Fourier Transform Infra Red (FT-IR) spectroscopies revealed the presence of lattice vibrations of metal-oxygen bondings and active sites in which the peaks corresponding to the bulk crystalline structures of Li2O, CaO, WO3 and MnO are detected. The performance of 5%MnO/15%CaO/CeO2 catalyst is the most potential among the CeO2-based catalysts, although lower than the 2%Li2O/MgO catalyst. The 2%Li2O/MgO catalyst showed the most promising C2+ hydrocarbons selectivity and yield at 98.0% and 5.7%, respectively.
文摘CeO2/ZnO nanocatalysts were prepared from the coupling route of homogeneous precipita-tion with microemulsion and the impregnation method. The catalytic performance of these two kinds of catalysts on the oxidative coupling of methane with carbon dioxide was tested and compared; the frac-tal behavior of the nanocatalysts was analyzed using fractal theory. The CeO2/ZnO nanocatalysts had much higher activity than the catalysts prepared by impregnation method. There was no regular relation-ship between the average size of CeO2/ZnO nanocatalysts and their catalytic performance; however, the conversion of methane increased with the increase of the fractal dimension of CeO2/ZnO nanocatalysts.
文摘The structure and catalytic desulfurization characteristics of CeO2-TiO2 mixed oxides were investigated by means ofX-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and catalytic activity tests. According to the results, a CeO2-TiO2solid solution is formed when the mole ratio of cerium to titanium n（Ce）：n（Ti） is 5：5 or greater, and the most suitable n（Ce）：n（Ti） isdetermined as 7：3, over which the conversion rate of SO2 and the yield of sulfur at 500℃ reach 93% and 99%, respectively.According to the activity testing curve, Ce0.7Ti0.3O2 （n（Ce）：n（Ti）=7：3） without any pretreatment can be gradually activated by reagentgas after about 10 min, and reaches a steady activation status 60 min later. The XPS results of Ce0.7Ti0.3O2 after different time ofSO2＋CO reaction show that CeO2 is the active component that offers the redox couple Ce4＋/Ce3＋ and the labile oxygen vacancies, andTiO2 only functions as a catalyst structure stabilizer during the catalytic reaction process. After 48 h of catalytic reaction at 500℃,Ce0.7Ti0.3O2 still maintains a stable structure without being vulcanized, demonstrating its good anti-sulfur poisoning performance.
基金This project is supported by Provincial Natural Science Foundation of Jiangsu (No.BK2002010).
文摘Homogenous precipitation and subsequent calcination has been used tosynthesize ultrafine ceria from cerium nitrate and urea solution. The ceria calcined from theprecursor inherit the size and morphology of it. The size and morphology of the precursor areclosely related to the preparation process. The morphology, size and distribution of the precursorcould be tailored by changing the reaction condition and the ageing time. Monodispersed 200 nm sizedspherical particles is prepared by this method. The powder is used in the chemical-mechanicalpolishing of Si wafer. The average surface roughness of the polished Si wafer is 0.171 nm measuredby AFM.
基金Project supported by the Provincal Major Science and Technology Special Projects of Zhejiang Province (2006 C11172)
文摘A cerium-triethanolamine complex was obtained by the reaction of cerium(III) nitrate and triethanolamine in ethanol solution. Spontaneous oxidation of cerium(III) to cerium(IV) by oxygen occurred during the reaction. The complex was crystalline and soluble in water. Nanosized ceria (CeO2) particles could be prepared via hydrolysis of the complex in aqueous solution, and the extent of agglomeration of particles increased with the increase in temperature for hydrolysis. Under the low temperature of 25 oC, mon...
基金supported by the National Natural Science Foundation of China(21173153)the National High Technology Research and Development Program of China(863 project)(2013AA065304)
文摘A series of catalysts were prepared by doping different loadings of CeO2 over TiO2-SiO2-WO3 and used for the selective catalytic reduction of NOx by NH3. The experimental results showed that the selective catalytic reduction（SCR） performance and SO2-resistant ability of TiO2-SiO2-WO3 were greatly enhanced by the introduction of cerium. The catalyst containing 10% CeO2 showed the highest NO conversion in a wide temperature range and good N2 selectivity with broad operation temperature window at the gas hourly space velocity（GHSV） of 30000 h–1, which was a very promising catalyst for NOx abatement from diesel engine exhaust. The catalysts were characterized by X-ray diffraction（XRD）, scanning electron microscopy with energy dispersive X-ray spectroscopy（SEM-EDS）, N2 adsorption-desorption（BET） and X-ray photoelectron spectroscopy（XPS）. The characterization results showed that the bigger pore radius, higher surface atomic concentration and dispersion of Ce and the abundant adsorbed oxygen on the surface of catalyst contributed to the best NH3-SCR performance of CeO2/TiO2-SiO2-WO3 catalyst containing 10% CeO2.
基金supported by the National Natural Science Foundation of China(No.51576039)
文摘The deposition of NH4 HSO4 and the poisoning effect of SO2 on SCR catalyst are the main obstacles that restrict the industrial application of CeO2-doped SCR catalysts.In this work,deposited NH4 HSO4 decomposition behavior and SO2 poisoning over V2 O5-MoO3/TiO2 catalysts modified with CeO2 and SiO2 were investigated.By the means of characterization analysis,it was found that the addition of SiO2 into VMo/Ti-Ce had an impact on the interaction existed between catalyst surface atoms and NH4 HSO4.Temperatureprogrammed methods and in situ diffused reflectance infrared Fourier transform spectroscopy(DRIFTS)experiments indicated that the doping of SiO2 promoted the decomposition of deposited NH4 HSO4 on VMo/Ti-Ce catalyst surface by reducing the thermal stability of NH4 HSO4 and enhancing the NH4 HSO4 reactivity with NO in low temperature.And this improvement may be the reason for the better catalytic activity than VMo/Ti-Ce in the case of NH4 HSO4 deposition.Accompanied with cerium sulfate species generated over catalyst surface,the conversion of SO2 to SO3 was inhibited in SiCe mixed catalyst.The addition of SiO2 could promote the decomposition of cerium sulfate,which may be a potential strategy to enhance the resistance of SO2 poisoning over CeO2-modifed catalysts.
基金Project supported by Shanghai Leading Academic Discipline Project (S30107)
文摘The Mn-doped Ce02 nanopowders with high catalysis activity were successfully fabricated through a simple hydrolyzed-oxidized approach. Firstly, the alloy Ce37Mnl 8C45 was prepared in vacuum induction melting furnace. Subsequently, Mn-doped CeO2 nanopowders with 142 m2/g of specific surface area were obtained through a simple hydrolyzed-oxidized procedure of the alloy Those nanopowders were heat treated at different temperatures. The obtained materials were characterized by X-ray diffraction （XRD）, transmission electron microscopy （TEM）, high-resolution transmission electron microscopy （HRTEM） and energy dispersive spectroscopy （EDS）. And the catalytic activity on vinyl chloride （VC） emission combustion was investigated. The results showed that those nanopowders after hydrolyzed-oxidized from Ce37Mn18C45 mainly consisted of CeO2 and Mn304. Manganese element increased the thermal stability of CeO2 nanopowders. The Mn-doped CeO2 nanopowders had three morphologies. Small particles were Mn-doped CeO2, square particles were Mn304 and the rods were Mn304 and Mn203. The Mn-doped CeO2 nanopowders had good vinyl chloride （VC） emission catalytic performance.
基金Supported by the National Natural Science Foundation of China（No.21507119）, the National High Technology Research and Development Program（＂863＂ Program） of China（No.2012AA062505） and the Postdoctoral Science Foundation of China（No. 2014M561025）.
文摘The influences of H2O and SO2 on CeO2/TiO2 monolith catalyst for the selective catalytic reduction（SCR） of NOx with NH3 were investigated. In the absence of SO2, H2O inhibited the SCR activity, which might be ascribed to the competitive adsorption of H2O and reactants such as NH3 and/or NOx. SO2 could promote the SCR activity of CeO2/TiO2 monolith catalyst in the absence of H20, while in the presence of H20 it speeded the deactivation. During the SCR reaction in SO2-containing gases, Ce（Ⅲ） sulfate species formed on the catalyst surface, resulting in the en- hancement of Bronsted acidity. This played a significant role in the enhanced SCR activity. However, in the presence of both H2O and SO2, a large amount of ammonium-sulfate salts formed on the catalyst surface, which resulted in the blocking of catalyst pores and deactivated the catalyst. In addition, the NOx conversion was more sensitive to gas hourly space velocity in the presence of H20 than in the absence of H20. The relatively high space velocity would result in a higher formation rate of ammonium-sulfate salts on per unit catalyst in the presence of H2O and SO2, which caused obvious deactivation of Ce/TiO2 monolith catalyst.
基金supported by the National Basic Research Program of China(2011CB808505)the National Natural Science Foundation of China(21322307,21421004)+1 种基金the"Shu Guang"project of Shanghai Municipal Education CommissionShanghai Education Development Foundation(13SG30)for financial support
文摘Cl-containing cerium dioxide(Ce O2) catalysts have been found to exhibit unique catalytic activities. In the present work, using density functional theory calculations with the inclusion of on-site Coulomb correction, we systematically studied the effect of Cl on the physicochemical properties of Ce O2 surfaces by substituting one subsurface O with Cl. The calculated results show that substituting an O atom with a Cl atom results in structural distortion and the reduction of one surface Ce4+ cation to Ce3+. The protruding Ce3+ cation greatly improves the adsorption energy of O2 to produce an active O2- species, and maintains the catalytic oxidation cycle of CO on Ce O2(110). These results may help us obtain a better understanding of Cl-ceria interacting systems and provide some guidance for the design of effective Ce O2-based catalysts.
