The synthesis of ultrafine cerium dioxide precursor via homogeneous precipitation was studied. Mixed aqueous solution of anhydrous cerium nitrate and urea was first heated to 85℃ for 2 h, and the prepared suspension ...The synthesis of ultrafine cerium dioxide precursor via homogeneous precipitation was studied. Mixed aqueous solution of anhydrous cerium nitrate and urea was first heated to 85℃ for 2 h, and the prepared suspension was then aged at room temperature for various periods of time. White precipitate was finally collected by centrifuging and washed with distilled water and anhydrous ethanol. The obtained cerium dioxide (CeO2) precursor was observed with SEM. It was found that the morphology and size of the precursor were strongly affected by aging time and stirring conditions (with or without stirring). The precipitated fine spherical particles of the precursor changed their shape from ellipse to slice or directly to slice. Fine spherical monodispersed (300 nm) precursor powders could be obtained by controlling the aging time. Stirring the solution also could change the reaction process and thus the morphology and size of the precursor were changed.展开更多
Characteristics of carbon deposition of CH 4 and C 2H 4 decomposition over supported Ni and Ni Ce catalysts were studied by using a pulse reaction as well as BET, TPR, XPS and hydrogen chemisorption techniques. It...Characteristics of carbon deposition of CH 4 and C 2H 4 decomposition over supported Ni and Ni Ce catalysts were studied by using a pulse reaction as well as BET, TPR, XPS and hydrogen chemisorption techniques. It is found that there is a metal semiconductor interaction (MScI) in the Ni Ce catalyst, and the effect of MScI on the carbon deposition of CH 4 decomposition is opposite to that of C 2H 4. A novel model of carbon deposition of CH 4 or C 2H 4 decomposition was proposed.展开更多
The morphology effect of Zr-doped CeOwas studied in terms of their activities in the selective oxidation of styrene to styrene oxide using tert-butyl hydroperoxide as the oxidant. In the present work, Zrdoped CeOnanor...The morphology effect of Zr-doped CeOwas studied in terms of their activities in the selective oxidation of styrene to styrene oxide using tert-butyl hydroperoxide as the oxidant. In the present work, Zrdoped CeOnanorods exhibited the highest catalytic performance（yield of styrene oxide and TOF value）followed by nanoparticles and nanocubes. For the Zr-doped CeOnanorods, the apparent activation energy is 56.3 k J/mol, which is much lower than the values of catalysts supported on nanoparticles and nanocubes（73.3 and 93.4 k J/mol）. The high resolution transmission electron microscopy results indicated that（100） and（110） crystal planes are predominantly exposed for Zr-doped CeOnanorods while（100）and（111） for nanocubes,（111） for nanoparticles. The remarkably increased catalytic activity of the Zrdoped CeOnanorods is mainly attributed to the higher percentage of Cespecies and more oxygen vacancies, which are associated with their exposed（100） and（110） crystal planes. Furthermore, recycling studies proved that the heterogeneous Zr-doped CeOnanorods did not lose its initial high catalytic activity after five successive recycles.展开更多
As one of the most active rare earths,CeO2 has caused extensive concern due to its multifunctional properties.CeO2-based compound oxide of M2O3-CeO2(M=La,Fe,and Al)were prepared by coprecipitation and impregnation met...As one of the most active rare earths,CeO2 has caused extensive concern due to its multifunctional properties.CeO2-based compound oxide of M2O3-CeO2(M=La,Fe,and Al)were prepared by coprecipitation and impregnation methods.The photocatalytic performance of the samples for the degradation methylene blue was studied under UV and visible light irradiation.The effects of constituents on the properties of the CeO2-based catalysts were investigated by XRD,TEM,BET,and UV-Vis spectrophotometer.The highest degradation of methylene blue under 230W UV light was almost 100%at 50 min by La2O3/Fe2O3-CeO2/γ-Al2O3 catalyst and 99.42%at 50 min by Fe2O3-CeO2/γ-Al2O3 catalyst.The methylene blue removal efficiency under indoor natural light reaches 93.81%by La2O3/Fe2O3-CeO2/γ-Al2O3 catalyst and 92.34%by Fe2O3-CeO2/γ-Al2O3 catalyst at 50 min.The order of catalytic degradation activity is La2O3/Fe2O3-CeO2/γ-Al2O3>Fe2O3-CeO2/γ-Al2O3>La2O3-CeO2/γ-Al2O3>Al2O3,owing to their structural features.The doping of La^3+or Fe3+onto CeO2/γ-Al2O produced much more oxygen vacancies under light irradiation and reduced the energy laps of CeO2 with value of 2.86 ev,which improved the photocatalytic redox performance of the composite oxide.展开更多
A series of catalysts on the basis of 10 wt.% CuO/y-AI203, 10 wt.% CuO ＋ 10 wt.% Cr2O3/y-AI203 and 15 wt.% MnO2/y -A1203 have been prepared and modified by CeO2 with contents up to 20 wt.%. Physico-chemical propertie...A series of catalysts on the basis of 10 wt.% CuO/y-AI203, 10 wt.% CuO ＋ 10 wt.% Cr2O3/y-AI203 and 15 wt.% MnO2/y -A1203 have been prepared and modified by CeO2 with contents up to 20 wt.%. Physico-chemical properties of the catalysts were determined by the methods of BET Adsorption, XRD, and TPR. Oxidative activity of the catalysts was studied at the temperature range 90-220 ℃and CO concentration of 3 mol.%. Addition of CeO2 led to changes in physico-chemical properties of the catalysts and formation of novel active centres that increased the activity of CuO and Cr203 containing catalysts, but decreased the activity of those, containing MnO2. The catalyst sample containing 10 wt.% CuO and 15 wt.% CeO2 has been shown to be the best one for complete conversion of CO. At the given conditions on this catalyst the complete oxidation of CO to CO2 occurred at 130 ~C during more than 500 h.展开更多
The structure and catalytic desulfurization characteristics of CeO2-TiO2 mixed oxides were investigated by means ofX-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and catalytic activity tests. Acco...The structure and catalytic desulfurization characteristics of CeO2-TiO2 mixed oxides were investigated by means ofX-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and catalytic activity tests. According to the results, a CeO2-TiO2solid solution is formed when the mole ratio of cerium to titanium n（Ce）：n（Ti） is 5：5 or greater, and the most suitable n（Ce）：n（Ti） isdetermined as 7：3, over which the conversion rate of SO2 and the yield of sulfur at 500℃ reach 93% and 99%, respectively.According to the activity testing curve, Ce0.7Ti0.3O2 （n（Ce）：n（Ti）=7：3） without any pretreatment can be gradually activated by reagentgas after about 10 min, and reaches a steady activation status 60 min later. The XPS results of Ce0.7Ti0.3O2 after different time ofSO2＋CO reaction show that CeO2 is the active component that offers the redox couple Ce4＋/Ce3＋ and the labile oxygen vacancies, andTiO2 only functions as a catalyst structure stabilizer during the catalytic reaction process. After 48 h of catalytic reaction at 500℃,Ce0.7Ti0.3O2 still maintains a stable structure without being vulcanized, demonstrating its good anti-sulfur poisoning performance.展开更多
CeO2-ZeO2 solid solutions are extensively used as oxygen storage promoters in the current automotive three-way catalysts. High thermal stability of the textural properties is one of the most important requirements for...CeO2-ZeO2 solid solutions are extensively used as oxygen storage promoters in the current automotive three-way catalysts. High thermal stability of the textural properties is one of the most important requirements for practical application since temperatures up to 1273 K are easily experienced by these materials under real working conditions. In the present paper, we investigated how hydrothermal treatments applied to cakes of doped and undoped ZrO2-rich CeO2-ZrO2 precursors might improve the thermal stability of the final CeO2-ZrO2 solid solution. A rationale was developed that allowed to correlate the morphology of the hydrothermaUy treated cake with the thermal stability at 1273 K of the final product, which did not depend on the composition of the mixed oxides.展开更多
Photoelectrocatalytic reduction of CO2 to fuels has great potential for reducing anthropogenic CO2 emissions and also lessening our dependence on fossil fuel energy.Herein,we report the successful development of a nov...Photoelectrocatalytic reduction of CO2 to fuels has great potential for reducing anthropogenic CO2 emissions and also lessening our dependence on fossil fuel energy.Herein,we report the successful development of a novel photoelectrocatalytic catalyst for the selective reduction of CO2 to methanol,comprising a copper catalyst modified with flower-like cerium oxide nanoparticles(CeO2 NPs)(a n-type semiconductor)and copper oxide nanoparticles(CuO NPs)(a p-type semiconductor).At an applied potential of−1.0 V(vs SCE)under visible light irradiation,the CeO2 NPs/CuO NPs/Cu catalyst yielded methanol at a rate of 3.44μmol cm^−2 h^−1,which was approximately five times higher than that of a CuO NPs/Cu catalyst(0.67μmol cm^−2 h^−1).The carrier concentration increased by^108 times when the flower-like CeO2 NPs were deposited on the CuO NPs/Cu catalyst,due to synergistic transfer of photoexcited electrons from the conduction band of CuO to that of CeO2,which enhanced both photocatalytic and photoelectrocatalytic CO2 reduction on the CeO2 NPs.The facile migration of photoexcited electrons and holes across the p–n heterojunction that formed between the CeO2 and CuO components was thus critical to excellent light-induced CO2 reduction properties of the CeO2 NPs/CuO NPs/Cu catalyst.Results encourage the wider application of composite semiconductor electrodes in carbon dioxide reduction.展开更多
CeO2-ZrO2-MnOx mixed oxide series were prepared by sol-gel method. CO pulse and CO-O2 cycle measurements were carried out to examine the oxygen storage complete capacity （OSCC） and dynamic oxygen storage capacity （...CeO2-ZrO2-MnOx mixed oxide series were prepared by sol-gel method. CO pulse and CO-O2 cycle measurements were carried out to examine the oxygen storage complete capacity （OSCC） and dynamic oxygen storage capacity （OSC） of the samples. The doping method brought about strong interactions between manganese oxide and ceria, both in the bulk and on the surface. Only a small part of Mn cations are incorporated into the ceria lattice to form solid solutions and the remaining are left on the surface as finely dispersed Mn3O4. The OSC behaviors of the materials are influenced by the doping amount of Mn and the solubility of Mn in the CeO2 lattice. The OSC is more easily affected by available contents of oxygen storage components when the measurement frequency is low. Comparatively, the concentration of lattice defects, which affects the mobility of bulk oxygen, is the determining factor under high frequency.展开更多
The catalyst screening tests for carbon dioxide oxidative coupling of methane (CO2-OCM) have been investigated over ternary and binary metal oxide catalysts. The catalysts are prepared by doping MgO- and CeO2-based so...The catalyst screening tests for carbon dioxide oxidative coupling of methane (CO2-OCM) have been investigated over ternary and binary metal oxide catalysts. The catalysts are prepared by doping MgO- and CeO2-based solids with oxides from alkali (Li2O), alkaline earth (CaO), and transition metal groups (WO3 or MnO). The presence of the peroxide (O2-2) active sites on the Li2O2, revealed by Raman spectroscopy, may be the key factor in the enhanced performance of some of the Li2O/MgO catalysts. The high reducibility of the CeO2 catalyst, an important factor in the CO2-OCM catalyst activity, may be enhanced by the presence of manganese oxide species. The manganese oxide species increases oxygen mobility and oxygen vacancies in the CeO2 catalyst. Raman and Fourier Transform Infra Red (FT-IR) spectroscopies revealed the presence of lattice vibrations of metal-oxygen bondings and active sites in which the peaks corresponding to the bulk crystalline structures of Li2O, CaO, WO3 and MnO are detected. The performance of 5%MnO/15%CaO/CeO2 catalyst is the most potential among the CeO2-based catalysts, although lower than the 2%Li2O/MgO catalyst. The 2%Li2O/MgO catalyst showed the most promising C2+ hydrocarbons selectivity and yield at 98.0% and 5.7%, respectively.展开更多
Elucidation of the CuOx-CeO2 interactions is of great interest and importance in understanding complex CuOx-CeO2 interfacial catalysis in various reactions. In the present work, we have investigated structures and cat...Elucidation of the CuOx-CeO2 interactions is of great interest and importance in understanding complex CuOx-CeO2 interfacial catalysis in various reactions. In the present work, we have investigated structures and catalytic activity in CO oxidation of CuOx species on CeO2 rods, cubes and polyhedra predominantly exposing {110}+{100}, {100} and {111} facets by the incipient wetness impregnation method with the lowest Cu loading of 0.025%. The structural evolution of CuOx species was found to depend on both the Cu loading and the CeO2 morphology. As the Cu loading increases, CuOx species are deposited preferentially on the surface defect of CeO2 and then aggregate and grow, accompanied by the formation of isolated Cu ions, CuOx clusters strongly/weakly interacting with the CeO2, highly dispersed Cu O nanoparticles, and large Cu O nanoparticles. The isolated Cu^+ species and CuOx clusters weakly interacting with the CeO2 were observed mainly on the O-terminated CeO2{100} facets. Meanwhile, more Cu(I) species are stabilized during CO reduction processes in CuOx/c-CeO2 catalysts than in CuOx/r-CeO2 and CuOx/p-CeO2 catalysts. The catalytic activities of various CuOx/CeO2 catalysts in CO oxidation vary with both the CuOx species and the CeO2 morphology. These results comprehensively elucidate the CuOx-CeO2 interactions and exemplify their morphology-dependence.展开更多
The key point in CO2 methanation is to improve the activity at low temperature and the stability.For this purpose,a new cerium-modified Ni-La2O3/ZrO2 catalyst was prepared using La1-xCexNiO3/ZrO2 with perovskite phase...The key point in CO2 methanation is to improve the activity at low temperature and the stability.For this purpose,a new cerium-modified Ni-La2O3/ZrO2 catalyst was prepared using La1-xCexNiO3/ZrO2 with perovskite phase as the precursor,which was obtained by citrate complexation combined with an impregnation method.The resulting catalyst was characterized through Nitrogen adsorption and desorption,X-ray diffraction (XRD),Transmission electron microscopy (TEM),Hydrogen temperature programmed reduction (H2-TPR),Temperature-programmed desorption of CO2 (CO2-TPD) and that of H2 (H2-TPD),and X-ray photoelectron spectroscopy (XPS) techniques,and the catalytic performances for CO2 methanation was investigated.Cerium modification could improve the effective activation of CO2,thus enhancing the activity at low temperature for CO2 methanation.The metal Ni nanoparticles prepared using this method were highly dispersed and showed excellent resistance to sintering,leading to very good stability,which could be attributed to the following:Ni nanoparticles could be confined by cerium-modified La2O3;La2O3could be confined by the cerium ions at the La2O3/ZrO2 interface;and the cerium ions were confined by ZrO2.展开更多
Composite supports CeO2-ZrO2-Al2O3（CZA） and CeO2-ZrO2-Al2O3-La2O3（CZALa） were prepared by co-precipitation method. Palladium catalysts were prepared by impregnation and their purification ability for CH4, CO and N...Composite supports CeO2-ZrO2-Al2O3（CZA） and CeO2-ZrO2-Al2O3-La2O3（CZALa） were prepared by co-precipitation method. Palladium catalysts were prepared by impregnation and their purification ability for CH4, CO and NOx in the mixture gas simulated the exhaust from natural gas vehicles （NGVs） operated under stoichiometric condition was investigated. The effect of La2O3 on the physicochemical properties of supports and catalysts was characterized by various techniques. The characterizations with X-ray diffraction （XRD） and Raman spectroscopy revealed that the doping of La2O3 restrained effectively the sintering of crystallite particles, maintained the crystallite particles in nanoscale and stabilized the crystal phase after calcination at 1000 ℃. The results of N2-adsorption, H2-temperatnre-programmed reduction （H2-TPR） and oxygen storage capacity （OSC） measurements indicated that La2O3 improved the textural properties, reducibility and OSC of composite supports. Activity testing results showed that the catalysts exhibit excellent activities for the simultaneous removal of methane, CO and NOx in the simulated exhaust gas. The catalysts supported on CZALa showed remarkable thermal stability and catalytic activity for the three pollutants, especially for NOx. The prepared palladium catalysts have high ability to remove NOx, CH4 and CO, and they can be used as excellent catalysts for the purification of exhaust from NGVs operated under stoichiometric condition. The catalysts reported in this work also have significant potential in industrial application because of their high performance and low cost.展开更多
In situ studies of catalysts play valuable roles in observing phase transformation, understanding the corresponding surface chemistry and the mechanism of the reaction. In this paper, ceria promoted cobalt oxide was p...In situ studies of catalysts play valuable roles in observing phase transformation, understanding the corresponding surface chemistry and the mechanism of the reaction. In this paper, ceria promoted cobalt oxide was prepared by the calcination method and investigated for the CO oxidation. The microstructure and morphology of CeO2-Co3O4 were investigated by the Scanning Electron Microscope, High-resolution transmission electron microscopy, Raman and X-ray photoelectron spectroscopy characterization. The effect of CeO2 doping on Co3O4 for CO oxidation was characterized by in situ X-ray Diffraction (in situ XRD) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS). In situ XRD was carried out under H2 atmosphere to evaluate the redox property of catalysts. The results indicated that the ceria doping can enhance the reducibility of Co2+ and promote the Co3+-Co2+-Co3+ cycle, owing to the oxygen replenish property of CeO2. Furthermore, adsorbed carbonate species on the surface of CeO2-Co3O4 were investigated by in situ-DRIFTS experiment. It was turned out that carbonate species on ceria promoted cobalt oxide catalysts showed different IR peaks compared with pure cobalt oxide. The carbonate species on ceria promoted catalyst are more active, and similar to free state carbonate species with weak bonding to catalyst surface, which can effectively inhibit catalyst inactivation. This study revealed the mechanism of ceria promoting CO oxidation over cobalt oxide, which will provide theoretical support for the design of efficient CO oxidation catalysts.展开更多
基金the Natural Science Foundation of Jiangsu Province under pro ject No.BK2002010.
文摘The synthesis of ultrafine cerium dioxide precursor via homogeneous precipitation was studied. Mixed aqueous solution of anhydrous cerium nitrate and urea was first heated to 85℃ for 2 h, and the prepared suspension was then aged at room temperature for various periods of time. White precipitate was finally collected by centrifuging and washed with distilled water and anhydrous ethanol. The obtained cerium dioxide (CeO2) precursor was observed with SEM. It was found that the morphology and size of the precursor were strongly affected by aging time and stirring conditions (with or without stirring). The precipitated fine spherical particles of the precursor changed their shape from ellipse to slice or directly to slice. Fine spherical monodispersed (300 nm) precursor powders could be obtained by controlling the aging time. Stirring the solution also could change the reaction process and thus the morphology and size of the precursor were changed.
文摘Characteristics of carbon deposition of CH 4 and C 2H 4 decomposition over supported Ni and Ni Ce catalysts were studied by using a pulse reaction as well as BET, TPR, XPS and hydrogen chemisorption techniques. It is found that there is a metal semiconductor interaction (MScI) in the Ni Ce catalyst, and the effect of MScI on the carbon deposition of CH 4 decomposition is opposite to that of C 2H 4. A novel model of carbon deposition of CH 4 or C 2H 4 decomposition was proposed.
基金the financial support from NNSFC(Project 21373054,21303023,21173052)the Natural Science Foundation of Shanghai Science and Technology Committee(08DZ2270500)
文摘The morphology effect of Zr-doped CeOwas studied in terms of their activities in the selective oxidation of styrene to styrene oxide using tert-butyl hydroperoxide as the oxidant. In the present work, Zrdoped CeOnanorods exhibited the highest catalytic performance（yield of styrene oxide and TOF value）followed by nanoparticles and nanocubes. For the Zr-doped CeOnanorods, the apparent activation energy is 56.3 k J/mol, which is much lower than the values of catalysts supported on nanoparticles and nanocubes（73.3 and 93.4 k J/mol）. The high resolution transmission electron microscopy results indicated that（100） and（110） crystal planes are predominantly exposed for Zr-doped CeOnanorods while（100）and（111） for nanocubes,（111） for nanoparticles. The remarkably increased catalytic activity of the Zrdoped CeOnanorods is mainly attributed to the higher percentage of Cespecies and more oxygen vacancies, which are associated with their exposed（100） and（110） crystal planes. Furthermore, recycling studies proved that the heterogeneous Zr-doped CeOnanorods did not lose its initial high catalytic activity after five successive recycles.
基金the National Natural Science Foundation of China(No.41763008)the National Science Foundation of Hunan Province(No.2018JJ2112)+1 种基金the Qian Jiao He KY(2019114)the Talents of Qian Ke He Platform(20175727-11)。
文摘As one of the most active rare earths,CeO2 has caused extensive concern due to its multifunctional properties.CeO2-based compound oxide of M2O3-CeO2(M=La,Fe,and Al)were prepared by coprecipitation and impregnation methods.The photocatalytic performance of the samples for the degradation methylene blue was studied under UV and visible light irradiation.The effects of constituents on the properties of the CeO2-based catalysts were investigated by XRD,TEM,BET,and UV-Vis spectrophotometer.The highest degradation of methylene blue under 230W UV light was almost 100%at 50 min by La2O3/Fe2O3-CeO2/γ-Al2O3 catalyst and 99.42%at 50 min by Fe2O3-CeO2/γ-Al2O3 catalyst.The methylene blue removal efficiency under indoor natural light reaches 93.81%by La2O3/Fe2O3-CeO2/γ-Al2O3 catalyst and 92.34%by Fe2O3-CeO2/γ-Al2O3 catalyst at 50 min.The order of catalytic degradation activity is La2O3/Fe2O3-CeO2/γ-Al2O3>Fe2O3-CeO2/γ-Al2O3>La2O3-CeO2/γ-Al2O3>Al2O3,owing to their structural features.The doping of La^3+or Fe3+onto CeO2/γ-Al2O produced much more oxygen vacancies under light irradiation and reduced the energy laps of CeO2 with value of 2.86 ev,which improved the photocatalytic redox performance of the composite oxide.
文摘A series of catalysts on the basis of 10 wt.% CuO/y-AI203, 10 wt.% CuO ＋ 10 wt.% Cr2O3/y-AI203 and 15 wt.% MnO2/y -A1203 have been prepared and modified by CeO2 with contents up to 20 wt.%. Physico-chemical properties of the catalysts were determined by the methods of BET Adsorption, XRD, and TPR. Oxidative activity of the catalysts was studied at the temperature range 90-220 ℃and CO concentration of 3 mol.%. Addition of CeO2 led to changes in physico-chemical properties of the catalysts and formation of novel active centres that increased the activity of CuO and Cr203 containing catalysts, but decreased the activity of those, containing MnO2. The catalyst sample containing 10 wt.% CuO and 15 wt.% CeO2 has been shown to be the best one for complete conversion of CO. At the given conditions on this catalyst the complete oxidation of CO to CO2 occurred at 130 ~C during more than 500 h.
文摘The structure and catalytic desulfurization characteristics of CeO2-TiO2 mixed oxides were investigated by means ofX-ray diffraction （XRD）, X-ray photoelectron spectroscopy （XPS） and catalytic activity tests. According to the results, a CeO2-TiO2solid solution is formed when the mole ratio of cerium to titanium n（Ce）：n（Ti） is 5：5 or greater, and the most suitable n（Ce）：n（Ti） isdetermined as 7：3, over which the conversion rate of SO2 and the yield of sulfur at 500℃ reach 93% and 99%, respectively.According to the activity testing curve, Ce0.7Ti0.3O2 （n（Ce）：n（Ti）=7：3） without any pretreatment can be gradually activated by reagentgas after about 10 min, and reaches a steady activation status 60 min later. The XPS results of Ce0.7Ti0.3O2 after different time ofSO2＋CO reaction show that CeO2 is the active component that offers the redox couple Ce4＋/Ce3＋ and the labile oxygen vacancies, andTiO2 only functions as a catalyst structure stabilizer during the catalytic reaction process. After 48 h of catalytic reaction at 500℃,Ce0.7Ti0.3O2 still maintains a stable structure without being vulcanized, demonstrating its good anti-sulfur poisoning performance.
基金PRIN 2006, "Caratterizzazione spettroscopica e morfologica di Me-POSS eterogeneizzati", MEL Chemicals
文摘CeO2-ZeO2 solid solutions are extensively used as oxygen storage promoters in the current automotive three-way catalysts. High thermal stability of the textural properties is one of the most important requirements for practical application since temperatures up to 1273 K are easily experienced by these materials under real working conditions. In the present paper, we investigated how hydrothermal treatments applied to cakes of doped and undoped ZrO2-rich CeO2-ZrO2 precursors might improve the thermal stability of the final CeO2-ZrO2 solid solution. A rationale was developed that allowed to correlate the morphology of the hydrothermaUy treated cake with the thermal stability at 1273 K of the final product, which did not depend on the composition of the mixed oxides.
基金financially supported by the National Natural Science Foundation of China(21802089)Natural Science Foundation of Shandong Province(ZR2019BB015)+5 种基金The Science and Technology Plan of Shandong Province Colleges and Universities under Grant(No.J14LC16)the Natural Science Foundation of Shandong Province under Grant(No.ZR2017MB018)funding support from the Shandong Province Double Hundred Talents Program for Foreign Expertsthe Energy Education Trust of New Zealandthe Dodd Walls Centre for Photonic and Quantum Technologiesthe Mac Diarmid Institute for Advanced Materials and Nanotechnology
文摘Photoelectrocatalytic reduction of CO2 to fuels has great potential for reducing anthropogenic CO2 emissions and also lessening our dependence on fossil fuel energy.Herein,we report the successful development of a novel photoelectrocatalytic catalyst for the selective reduction of CO2 to methanol,comprising a copper catalyst modified with flower-like cerium oxide nanoparticles(CeO2 NPs)(a n-type semiconductor)and copper oxide nanoparticles(CuO NPs)(a p-type semiconductor).At an applied potential of−1.0 V(vs SCE)under visible light irradiation,the CeO2 NPs/CuO NPs/Cu catalyst yielded methanol at a rate of 3.44μmol cm^−2 h^−1,which was approximately five times higher than that of a CuO NPs/Cu catalyst(0.67μmol cm^−2 h^−1).The carrier concentration increased by^108 times when the flower-like CeO2 NPs were deposited on the CuO NPs/Cu catalyst,due to synergistic transfer of photoexcited electrons from the conduction band of CuO to that of CeO2,which enhanced both photocatalytic and photoelectrocatalytic CO2 reduction on the CeO2 NPs.The facile migration of photoexcited electrons and holes across the p–n heterojunction that formed between the CeO2 and CuO components was thus critical to excellent light-induced CO2 reduction properties of the CeO2 NPs/CuO NPs/Cu catalyst.Results encourage the wider application of composite semiconductor electrodes in carbon dioxide reduction.
基金Project supported by the National "973"Project (2004CB719503)Project supported by the National Natural ScienceFoundation of China (50502023)
文摘CeO2-ZrO2-MnOx mixed oxide series were prepared by sol-gel method. CO pulse and CO-O2 cycle measurements were carried out to examine the oxygen storage complete capacity （OSCC） and dynamic oxygen storage capacity （OSC） of the samples. The doping method brought about strong interactions between manganese oxide and ceria, both in the bulk and on the surface. Only a small part of Mn cations are incorporated into the ceria lattice to form solid solutions and the remaining are left on the surface as finely dispersed Mn3O4. The OSC behaviors of the materials are influenced by the doping amount of Mn and the solubility of Mn in the CeO2 lattice. The OSC is more easily affected by available contents of oxygen storage components when the measurement frequency is low. Comparatively, the concentration of lattice defects, which affects the mobility of bulk oxygen, is the determining factor under high frequency.
文摘The catalyst screening tests for carbon dioxide oxidative coupling of methane (CO2-OCM) have been investigated over ternary and binary metal oxide catalysts. The catalysts are prepared by doping MgO- and CeO2-based solids with oxides from alkali (Li2O), alkaline earth (CaO), and transition metal groups (WO3 or MnO). The presence of the peroxide (O2-2) active sites on the Li2O2, revealed by Raman spectroscopy, may be the key factor in the enhanced performance of some of the Li2O/MgO catalysts. The high reducibility of the CeO2 catalyst, an important factor in the CO2-OCM catalyst activity, may be enhanced by the presence of manganese oxide species. The manganese oxide species increases oxygen mobility and oxygen vacancies in the CeO2 catalyst. Raman and Fourier Transform Infra Red (FT-IR) spectroscopies revealed the presence of lattice vibrations of metal-oxygen bondings and active sites in which the peaks corresponding to the bulk crystalline structures of Li2O, CaO, WO3 and MnO are detected. The performance of 5%MnO/15%CaO/CeO2 catalyst is the most potential among the CeO2-based catalysts, although lower than the 2%Li2O/MgO catalyst. The 2%Li2O/MgO catalyst showed the most promising C2+ hydrocarbons selectivity and yield at 98.0% and 5.7%, respectively.
文摘Elucidation of the CuOx-CeO2 interactions is of great interest and importance in understanding complex CuOx-CeO2 interfacial catalysis in various reactions. In the present work, we have investigated structures and catalytic activity in CO oxidation of CuOx species on CeO2 rods, cubes and polyhedra predominantly exposing {110}+{100}, {100} and {111} facets by the incipient wetness impregnation method with the lowest Cu loading of 0.025%. The structural evolution of CuOx species was found to depend on both the Cu loading and the CeO2 morphology. As the Cu loading increases, CuOx species are deposited preferentially on the surface defect of CeO2 and then aggregate and grow, accompanied by the formation of isolated Cu ions, CuOx clusters strongly/weakly interacting with the CeO2, highly dispersed Cu O nanoparticles, and large Cu O nanoparticles. The isolated Cu^+ species and CuOx clusters weakly interacting with the CeO2 were observed mainly on the O-terminated CeO2{100} facets. Meanwhile, more Cu(I) species are stabilized during CO reduction processes in CuOx/c-CeO2 catalysts than in CuOx/r-CeO2 and CuOx/p-CeO2 catalysts. The catalytic activities of various CuOx/CeO2 catalysts in CO oxidation vary with both the CuOx species and the CeO2 morphology. These results comprehensively elucidate the CuOx-CeO2 interactions and exemplify their morphology-dependence.
基金supported by the National Natural Science Foundation of China(Nos.21872101,21576192)the Natural Science Foundation of Tianjin(18JCZDJC31300)。
文摘The key point in CO2 methanation is to improve the activity at low temperature and the stability.For this purpose,a new cerium-modified Ni-La2O3/ZrO2 catalyst was prepared using La1-xCexNiO3/ZrO2 with perovskite phase as the precursor,which was obtained by citrate complexation combined with an impregnation method.The resulting catalyst was characterized through Nitrogen adsorption and desorption,X-ray diffraction (XRD),Transmission electron microscopy (TEM),Hydrogen temperature programmed reduction (H2-TPR),Temperature-programmed desorption of CO2 (CO2-TPD) and that of H2 (H2-TPD),and X-ray photoelectron spectroscopy (XPS) techniques,and the catalytic performances for CO2 methanation was investigated.Cerium modification could improve the effective activation of CO2,thus enhancing the activity at low temperature for CO2 methanation.The metal Ni nanoparticles prepared using this method were highly dispersed and showed excellent resistance to sintering,leading to very good stability,which could be attributed to the following:Ni nanoparticles could be confined by cerium-modified La2O3;La2O3could be confined by the cerium ions at the La2O3/ZrO2 interface;and the cerium ions were confined by ZrO2.
基金supported by the National Natural Science Foundation of China (No. 20773090, 20803049)the National High Technology Researchand Development Program of China (863 Program, No. 2006AA06Z347)the Specialized Research Fund for the Doctoral Program of Higher Education(20070610026)
文摘Composite supports CeO2-ZrO2-Al2O3（CZA） and CeO2-ZrO2-Al2O3-La2O3（CZALa） were prepared by co-precipitation method. Palladium catalysts were prepared by impregnation and their purification ability for CH4, CO and NOx in the mixture gas simulated the exhaust from natural gas vehicles （NGVs） operated under stoichiometric condition was investigated. The effect of La2O3 on the physicochemical properties of supports and catalysts was characterized by various techniques. The characterizations with X-ray diffraction （XRD） and Raman spectroscopy revealed that the doping of La2O3 restrained effectively the sintering of crystallite particles, maintained the crystallite particles in nanoscale and stabilized the crystal phase after calcination at 1000 ℃. The results of N2-adsorption, H2-temperatnre-programmed reduction （H2-TPR） and oxygen storage capacity （OSC） measurements indicated that La2O3 improved the textural properties, reducibility and OSC of composite supports. Activity testing results showed that the catalysts exhibit excellent activities for the simultaneous removal of methane, CO and NOx in the simulated exhaust gas. The catalysts supported on CZALa showed remarkable thermal stability and catalytic activity for the three pollutants, especially for NOx. The prepared palladium catalysts have high ability to remove NOx, CH4 and CO, and they can be used as excellent catalysts for the purification of exhaust from NGVs operated under stoichiometric condition. The catalysts reported in this work also have significant potential in industrial application because of their high performance and low cost.
基金supported by the State Key Research Development Program of China(2016YFA0204200)the National Natural Science Foundation of China(21822603,21577036,21773062)+3 种基金the Shanghai Pujiang Program(17PJD011)the Zhejiang public welfare technology research plan/rural agriculture(LGN18B010001)the Zhejiang provincial Collaborative Innovation Center of Agricultural Biological Resources Biochemical Manufacturing(NO:2016KF0005)the scientific research project of Zhejiang provincial education department(Y201839892)~~
文摘In situ studies of catalysts play valuable roles in observing phase transformation, understanding the corresponding surface chemistry and the mechanism of the reaction. In this paper, ceria promoted cobalt oxide was prepared by the calcination method and investigated for the CO oxidation. The microstructure and morphology of CeO2-Co3O4 were investigated by the Scanning Electron Microscope, High-resolution transmission electron microscopy, Raman and X-ray photoelectron spectroscopy characterization. The effect of CeO2 doping on Co3O4 for CO oxidation was characterized by in situ X-ray Diffraction (in situ XRD) and in situ diffuse reflectance infrared Fourier transform spectroscopy (in situ DRIFTS). In situ XRD was carried out under H2 atmosphere to evaluate the redox property of catalysts. The results indicated that the ceria doping can enhance the reducibility of Co2+ and promote the Co3+-Co2+-Co3+ cycle, owing to the oxygen replenish property of CeO2. Furthermore, adsorbed carbonate species on the surface of CeO2-Co3O4 were investigated by in situ-DRIFTS experiment. It was turned out that carbonate species on ceria promoted cobalt oxide catalysts showed different IR peaks compared with pure cobalt oxide. The carbonate species on ceria promoted catalyst are more active, and similar to free state carbonate species with weak bonding to catalyst surface, which can effectively inhibit catalyst inactivation. This study revealed the mechanism of ceria promoting CO oxidation over cobalt oxide, which will provide theoretical support for the design of efficient CO oxidation catalysts.
