Efficiency enhancement of Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3) solar cell devices was performed by using iso-butyl ammonium iodide(IBA)passivated on Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3) films.The n-i-p structure of pero...Efficiency enhancement of Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3) solar cell devices was performed by using iso-butyl ammonium iodide(IBA)passivated on Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3) films.The n-i-p structure of perovskite solar cell devices was fabricated with the structure of FTO/SnO_(2)/Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3)(FTO,i.e.,fluorine doped tin oxide)and IBA/Spiro-OMeTAD/Ag.The effect of different weights of IBA passivated on Cs-doped perovskite solar cells(PSCs)was systematically investigated and compared with non-passivated devices.It was found that the 5-mg IBA-passivated devices exhibited a high power conversion efficiency(PCE)of 15.49%higher than 12.64%of non-IBA-passivated devices.The improvement of photovoltaic parameters of the 5-mg IBA-passivated device can be clearly observed compared to the Cs-doped device.The better performance of the IBA-passivated device can be confirmed by the reduction of PbI_(2) phase in the crystal structure,lower charge recombination rate,lower charge transfer resistance,and improved contact angle of perovskite films.Therefore,IBA passivation on Cs_(0.1)(CH_(3)NH)_(0.9)PbI_(3) is a promising technique to improve the efficiency of Cs-doped perovskite solar cells.展开更多
基金financial support from the Development and Promotion of Science and Technology Talent Project(DPST) and Graduate School,Chiang Mai University
文摘Efficiency enhancement of Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3) solar cell devices was performed by using iso-butyl ammonium iodide(IBA)passivated on Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3) films.The n-i-p structure of perovskite solar cell devices was fabricated with the structure of FTO/SnO_(2)/Cs_(0.1)(CH_(3)NH_(3))_(0.9)PbI_(3)(FTO,i.e.,fluorine doped tin oxide)and IBA/Spiro-OMeTAD/Ag.The effect of different weights of IBA passivated on Cs-doped perovskite solar cells(PSCs)was systematically investigated and compared with non-passivated devices.It was found that the 5-mg IBA-passivated devices exhibited a high power conversion efficiency(PCE)of 15.49%higher than 12.64%of non-IBA-passivated devices.The improvement of photovoltaic parameters of the 5-mg IBA-passivated device can be clearly observed compared to the Cs-doped device.The better performance of the IBA-passivated device can be confirmed by the reduction of PbI_(2) phase in the crystal structure,lower charge recombination rate,lower charge transfer resistance,and improved contact angle of perovskite films.Therefore,IBA passivation on Cs_(0.1)(CH_(3)NH)_(0.9)PbI_(3) is a promising technique to improve the efficiency of Cs-doped perovskite solar cells.
