高效液相色谱-蒸发光散射检测法测定合成产物中的果糖棕榈酸酯

建立了反相高效液相色谱-蒸发光散射检测（HPLC-ELSD）测定合成产物中的果糖棕榈酸单酯和果糖棕榈酸双酯的方法。HPLC-ELSD条件为：反相Prevail C18色谱柱,柱温为30℃,流动相为乙酸乙酯-甲醇-水（体积比为59.4∶30∶10.6）,流速为1mL/min,ELSD漂移管温度为73.8℃,载气流速为2L/min。在该色谱条件下,果糖棕榈酸单酯及果糖棕榈酸双酯在进样量为1-15μg时,与其峰面积的线性关系良好,相关系数r^2均大于0.9996。

Flotation de-silicating from diasporic-bauxite with cetyl trimethylammonium bromide

Using cetyl trimethylammonium bromide （CTAB） as collector, the flotation de-silicating from diasporic-bauxite was investigated. And the Zeta potentials and contact-angles of silicate minerals and diaspore were also stu-（died.）The results show that in the presence of 2×10-4 mol·L-1CTAB, the surface charges of pyrophyllite, kaolinite and illite become more positive, and the contact angles of these three silicates also increase evidently in the pH range of 2-8, but the Zeta potentials and contact angles of diaspore change little. So, the floatability of the four minerals is in the following order: pyrophyllite>kaolinite≈illite>diaspore. The open-circuit flotation results also show that a bauxite concentrate with m（Al2O3）/m（SiO2） over 9.3 and Al2O3 recovery over 76% can be obtained from diasporic-bauxite ore. The result of XRD of the bauxite concentrate shows that pyrophyllite is easier to be removed from diasporic-bauxite than illite and kaolinite due to its better floatability.

Facile synthesis of Zn_2GeO_4 nanorods toward improved photocatalytic reduction of CO_2 into renewable hydrocarbon fuel

Zn2GeO4 nanorods were prepared by a surfactant-assisted solution phase route.The as-prepared products were characterized by X-ray powder diffraction(XRD),scanning electron microscopy(SEM),high-resolution transmission electron microscopy(HRTEM),inductively coupled plasma atomic emission spectrometer(ICP-AES),UV-vis diffuse reflection spectroscopy and photoluminescence(PL) spectroscopy.The possible formation mechanism of Zn2GeO4 nanorods was discussed.It was supposed that the CTA+ cations preferentially adsorb on the planes of Zn2GeO4 nanorods,leading to preferential growth along the c-axis to form the Zn2GeO4 rods with larger aspect ratio and higher surface area,which showed the improved photocatalytic activity for photoreduction of CO2.The photoluminescence(PL) property of Zn2GeO4 nanorods was investigated through the emission spectra.

Synthesis of mesoporous cerium-zirconium mixed oxides by hydrothermal templating method

Mesoporous cerium-zirconium mixed oxides were prepared by hydrothermal method using cetyl trimethyl ammonium bromide (CTAB) as template. The effects of amount of template, pH value of solution and hydrothermal temperature on mesostructure of samples were systematically investigated. The final products were characterized by XRD, TEM, FT-IR, and BET. The results indicate that all the cerium-zirconium mixed oxides present a meso-structure. At molar ratio of n(CTAB)/n((Ce)+(Zr))= 0.15, pH value of 9, and hydrothermal temperature of 120 ℃, the samples obtained possess a specific surface area of 207.9 m2/g with pore diameter of 3.70 nm and pore volume of 0.19 cm3/g.

Photorheology and rheokinetics of CTAB/chlorocinnamic acid micelles

The photosensitive micellar system with prospect in drag reduction and heat transfer enhancement has been the research focus of science and industry.In this paper,a new type of photosensitive micellar system formed by cetyl trimethylammonium bromide(CTAB) and trans-chlorocinnamic acid(trans-CICA) was investigated.The effects of counter-ion concentration,surfactant concentration,UV irradiation time,and the position of substituent groups of counter-ion on photorheological properties were discussed.The results indicate that after UV irradiation the relative viscosity and thixotropy of micellar systems reduce obviously.At the same time,the relative viscosity of micelle systems and concentration of trans-CICA decline during UV irradiation time.The flow curves of micellar solutions before and after UV irradiation could be described by non-linear co-rotational Jeffreys model correctly.The rheokinetic equation was firstly established to describe the relationship between relative viscosity of micelle systems and conversion of trans-CICA.

STUDIES ON DERIVATIVE FLUORIMETRY Ⅳ. DETERMINATION OF TRACE AMOUNT OF TERBIUM THROUGH ITS TERNARY COMPLEX WITH ACETYLACETONE AND EDTA IN THE PRESENCE OF CETYL PYRIDINIUM CHLORIDE

Terbium can form a ternary complex having a ratio of 1:1:1 with acetylacetone and EDTA. By adding cetyl pyridinium chloride into the above system, a marked enhancement of fluorescence intensity is observed and the ternary complex becomes more stable than before. For analytical application, the derivative spectrofluorimetric method has high sensitivity and the effect of foreign ions is very low. The optimum conditions were obtained. The calibration graph is linear over 5～100μg/mL.

Environmentally Benign Electrophilic Halogenation of Naphthalenes by H₂O₂—Alkali Metal Halides in An Aqueous Cationic Micellar Media

An efficient and greener protocol for the synthesis of 1-halo-naphthols by the action of hydrogen peroxide and alkali metal halides in aqueous micellar media is been described in the present work. This is an environmentally clean and safe procedure, which involved insitu generation of the active halogen in presence of alkali halides. Cationic surfactants such as cetyltrimethylammoniumbromide (CTAB) and cetyltrimethylammoniumchloride (CTAC) were found to facilitate efficiency of halogenation in aqueous media.

Evaporation Retardation by Monomolecular Layers: An Experimental Study at the Aji Reservoir (India)

It is an established fact that huge quantities of water are lost from lakes, reservoirs and soils by evaporation. This assumes greater significance in arid and semi-arid regions around the globe when a general scarcity of water is compounded by high evaporation loss from the open water surfaces of lakes and reservoirs. The use of surface covering by a monomolecular film to reduce evaporation loss from large open water surfaces offers the greatest promise among all currently available techniques. This is the only system that retains the water surface in a state that does not interfere with other uses of the body of water such as boating, navigation recreation, fish, and wildlife propagation. Various experiments and field trials worldwide have proven conclusively that the fatty alcohols and their emulsions effectively retard water evaporation and result in saving to the tune of about 20% to 50%. An experiment was carried out at the Aji Reservoir (India) using a mixture of Cetyl and Stearyl alcohol that confirmed 19.26% saving in evaporation loss. During this six-month trial, about 0.18 mcum of water was saved which otherwise might have evaporated.

Self-aggregation of surfactants in water solution by NMR

Dynamic behavior of surfactant molecules, sodium dodecyl sulfonate (SDSN), cetyl trimethyl ammonium bromide (CTAB) and triton X-100, and their micelles in water solution at various concentrations were studied by chemical shift, self diffusion coefficient (D) and nuclear magnetic resonance relaxation (T1 and T2) measurements. Experimental results show that there exist turning points at surfactant concentration (C) nearby the critical micelle concentration (cmc) for all of the above-mentioned parameters, which approach the constant values when C equals 5 to 10 times cmc. T1 and T2 measurements show that when C<cmc, Triton X-100 molecules exhibit fast isotropic motion in water solution. After micellization, the motion of hydrophobic chains is far away from the extreme narrowing condition, however, the long hydrophilic oxyethylene chains move relatively freely, although their T1 and T2 become shorter in comparison with those of the molecules in mono-molecular state. The behavior of the hydrophobic chains within the micellar core of SDSN and CTAB is similar to that of Triton X-100 to some extent.

Significantly Enhanced Actuation Performance of IPMC by Surfactant-Assisted Processable MWCNT/Nafion Composite

The performance of Ionic Polymer Metal Composite （IPMC） actuator was significantly enhanced by incorporating surfactant-assisted processable Multi-Walled Carbon Nanotubes （MWCNTs） into a Nation solution. Cationic surfactant Cetyl Trimethyl Ammonium Bromide （CTAB） was employed to disperse MWCNTs in the Nation matriX, forming a homogeneous and stable dispersion ofnanotubes. The processing did not involve any strong acid treatment and thus effectively preserved the excellent electronic properties associated with MWCNT. The as-obtained MWCNT/Nafion-IPMC actuator was tested in terms of conductivity, bulk and surface morphology, blocking force and electric current. It was shown that the blocking force and the current of the new IPMC are 2.4 times and 1.67 times higher compared with a pure Nation-based IPMC. Moreover, the MWCNT/IPMC performance is much better than previously reported Nafion-IPMC doped by acid-treated MWCNT. Such significantly improved performance should be attributed to the improvement of electrical property associated with the addition of MWCNTs without acid treatment.

Formation of Lamellar Mesostructured Crystalline Silica by Self-assembly of CTAB

Controlling organic-inorganic liquid crystal structures to form lamellar mesostructured crystalline silica nanosheets(LCS) was achieved by using the simple cationic surfactant cetyl trimethyl ammonium bromide(CTAB). The organic-inorganic interaction under the condtions of a high surfactant concentration and suitable synthesis temperature played an important role in the construction of mesostructured crystalline silica.

THE ELECTRONIC SPECTRA OF HYPOCRELLINS A, B AND THEIR DERIVATIVES

Hypocrellins A and B are new phototherapeutic drugs developed in China. At present, the electronic spectra of hypocretlins A, B and their derivatives have not been studied systematically. Their absorption and fluorescence spectra were studied in detail. It was proved that their three visible absorption bands come respectively from the Ⅱ Ⅱ~* transition of their conjugated systems and intramolecular proton trans-

PREAPARATION OF CATIONIC LATEXES OF POLY(STYRENE-CO-BUTYL ACRYLATE) AND THEIR PROPERTIES EVOLUTION IN LATEX DILUTION

Cationic latexes were prepared through emulsion copolymerization of styrene （St） and butyl acrylate （BA） with a cationic surfactant, cetyl trimethyl ammonium bromide （CTAB）. Latex properties, including particle size, size distribution, （ potential, surface tension and monomer conversion, were determined for latexes prepared with different CTAB amounts. Evolution of these properties during emulsion polymerization was followed in order to understand the mechanism of the particles formation. Results showed that both particle size and 6＂ potential were function of polymerization time and latex solids. Parallel emulsion polymerizations with cationic, anionic charged initiator and charge-free initiators were also carried out, the latex properties were determined at different polymerization time. All these results were attentively interpreted based on the mechanisms of emulsion polymerization, surfactant adsorption and latex particle stabilization.