A simple process to fabricate chain-like carbon nanotube （CNT） films by microwave plasma-enhanced chemical vapor deposition （MPCVD） was developed successfully. Prior to deposition, the Ti/Al2O3 substrates were gro...A simple process to fabricate chain-like carbon nanotube （CNT） films by microwave plasma-enhanced chemical vapor deposition （MPCVD） was developed successfully. Prior to deposition, the Ti/Al2O3 substrates were ground with Fe-doped SiO2 powder. The nano-structure of the deposited films was analyzed by scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, and Raman spectroscopy. The field electron emission characteristics of the chain-like carbon nanotube films were measured under the vacuum of 10-5 Pa. The low turn-on field of 0.80 V/μm and the emission current density of 8.5 mA/cm2 at the electric field of 3.0 V/μm are obtained. Based on the above results, chain-like carbon nanotube films probably have important applications in cold cathode materials and electrode materials.展开更多
The excess Helmholtz free energy functional for nonpolar chain-like molecules is formulated in terms of a weighted density approximation （WDA） for short-range interactions and a Weaks Chandler Andersen （WCA） appro...The excess Helmholtz free energy functional for nonpolar chain-like molecules is formulated in terms of a weighted density approximation （WDA） for short-range interactions and a Weaks Chandler Andersen （WCA） approximation and a Barker Henderson （BH） theory for long-range attraction. Within the framework of density functional theory （DFT）, vapour liquid interracial properties including density profile and surface tension, and vapour-liquid nucleation properties including density profile, work of formation and number of particles are investigated for spherical and chain- like molecules. The obtained vapour liquid surface tension and the number of particles in critical nucleus for Lennard- Jones （L J） fluids are consistent with the simulation results. The influences of supersaturation, temperature and chain length on vapour liquid nucleation properties are discussed.展开更多
Chain-like zircona （ZrO2） nanofibers were prepared by microwave sinter- ing without any surfactants or solid templates. Microwave sintering was conducted in a multimode microwave cavity with TE666 resonant mode at 2...Chain-like zircona （ZrO2） nanofibers were prepared by microwave sinter- ing without any surfactants or solid templates. Microwave sintering was conducted in a multimode microwave cavity with TE666 resonant mode at 2.45 GHz. Carbon particles were used to activate unique thermal processes when mixed with ZrO2 precursor. The sintering condition was at 1300℃ for 10 min. Samples were characterized by XRD, SEM, TEM techniques. It was found that both monolithic and tetragonal ZrO2 co-existed in samples prepared from the mixture of ZrO2 precursors and carbon by either microwave or conventional sintering. Only m-ZrO2 exists in samples prepared by ZrO2 precursors without carbon. ZrO2 appeared as chain-like nanofibers, which might be attributed to a so- called carbon-induced self-assembly growth mechanism.展开更多
The chain-like prior particle boundaries(PPBs)as a kind of stubborn harmful precipitate will hinder atomic diffusion and particle connection.They can only be broken into nanoscale through thermal deformation(1160–120...The chain-like prior particle boundaries(PPBs)as a kind of stubborn harmful precipitate will hinder atomic diffusion and particle connection.They can only be broken into nanoscale through thermal deformation(1160–1200℃).Here,treated by the pulsed electric current at 800℃,PPBs were dissolved quickly as a result of the interaction between the pulsed electric current and the chain-like structure.According to the electromigration theory and the calculation results,the high current density regions will be mainly produced at the gaps due to the conductivity difference between the precipitates and the matrix.The atomic diffusion flux caused by the pulsed electric current is proportional to the current density.Therefore,the existence of a large number of gaps in the chain-like PPBs will make the high current density regions play a more positive role in fast-dissolution.展开更多
Chain-like MoS2assemblies consisting of hexagonal MoS2nanoparticles(20-60 nm) have been successfully synthesized in a Triton X-100/cyclohexane/hexanol/water W/O reverse microemulsion in the presence of(NH 4)2MoS 4 as ...Chain-like MoS2assemblies consisting of hexagonal MoS2nanoparticles(20-60 nm) have been successfully synthesized in a Triton X-100/cyclohexane/hexanol/water W/O reverse microemulsion in the presence of(NH 4)2MoS 4 as the molybdenum source and NH2OH·HCl as the reducing agent.The products were characterized by X-ray powder diffraction(XRD),transmission electron microscopy(TEM) and UV-vis diffuse reflectance absorption spectra.The influence of synthetic parameters such as acidity,water/oil ratio(0),aging time and annealing temperature on the formation of MoS2assemblies was investigated.TEM analysis showed that these synthetic factors played important roles in controlling the size of MoS2nanoparticles and the length of the chain-like MoS2assemblies.XRD analysis indicated that the well-crystallized MoS2nanoparticles could be obtained by annealing the precursors at 700 C for2h under a flow of N2atmosphere.In addition,the as-prepared chain-like MoS2nanoparticles exhibited excellent photocatalytic H2activity in Ru(bpy) 3 2+-MoS2-H2A three-component molecular systems under visible light irradiation.展开更多
文摘A simple process to fabricate chain-like carbon nanotube （CNT） films by microwave plasma-enhanced chemical vapor deposition （MPCVD） was developed successfully. Prior to deposition, the Ti/Al2O3 substrates were ground with Fe-doped SiO2 powder. The nano-structure of the deposited films was analyzed by scanning electron microscopy （SEM）, transmission electron microscopy （TEM）, and Raman spectroscopy. The field electron emission characteristics of the chain-like carbon nanotube films were measured under the vacuum of 10-5 Pa. The low turn-on field of 0.80 V/μm and the emission current density of 8.5 mA/cm2 at the electric field of 3.0 V/μm are obtained. Based on the above results, chain-like carbon nanotube films probably have important applications in cold cathode materials and electrode materials.
基金Project supported by the National Natural Science Foundation of China （Grant Nos 20576030 and 20606009）, the Program for New Century Excellent Talents of China （Grant No 06-0206）, and the Research Fund of Key Laboratory for Nanomaterials, Ministry of Education of China （Grant No 2006-2）.
文摘The excess Helmholtz free energy functional for nonpolar chain-like molecules is formulated in terms of a weighted density approximation （WDA） for short-range interactions and a Weaks Chandler Andersen （WCA） approximation and a Barker Henderson （BH） theory for long-range attraction. Within the framework of density functional theory （DFT）, vapour liquid interracial properties including density profile and surface tension, and vapour-liquid nucleation properties including density profile, work of formation and number of particles are investigated for spherical and chain- like molecules. The obtained vapour liquid surface tension and the number of particles in critical nucleus for Lennard- Jones （L J） fluids are consistent with the simulation results. The influences of supersaturation, temperature and chain length on vapour liquid nucleation properties are discussed.
基金The authors appreciate the financial support from the National Natural Science Foundation of China （Grant Nos. 51672254, 51602287 and 51402264） and the China Postdoctoral Science Foundation （Grant No. 2016M602266）.
文摘Chain-like zircona （ZrO2） nanofibers were prepared by microwave sinter- ing without any surfactants or solid templates. Microwave sintering was conducted in a multimode microwave cavity with TE666 resonant mode at 2.45 GHz. Carbon particles were used to activate unique thermal processes when mixed with ZrO2 precursor. The sintering condition was at 1300℃ for 10 min. Samples were characterized by XRD, SEM, TEM techniques. It was found that both monolithic and tetragonal ZrO2 co-existed in samples prepared from the mixture of ZrO2 precursors and carbon by either microwave or conventional sintering. Only m-ZrO2 exists in samples prepared by ZrO2 precursors without carbon. ZrO2 appeared as chain-like nanofibers, which might be attributed to a so- called carbon-induced self-assembly growth mechanism.
基金financially supported by the National Natural Science Foundation of China(Nos.51874023 and U1860206)the Fundamental Research Funds for the Central Universities(FRF-TP20-02B)the Recruitment Program of Global Experts。
文摘The chain-like prior particle boundaries(PPBs)as a kind of stubborn harmful precipitate will hinder atomic diffusion and particle connection.They can only be broken into nanoscale through thermal deformation(1160–1200℃).Here,treated by the pulsed electric current at 800℃,PPBs were dissolved quickly as a result of the interaction between the pulsed electric current and the chain-like structure.According to the electromigration theory and the calculation results,the high current density regions will be mainly produced at the gaps due to the conductivity difference between the precipitates and the matrix.The atomic diffusion flux caused by the pulsed electric current is proportional to the current density.Therefore,the existence of a large number of gaps in the chain-like PPBs will make the high current density regions play a more positive role in fast-dissolution.
基金supported by the National Natural Science Foundation of China (20803033)the National Basic Research Program of China(2009CB220010)+1 种基金the Scientific Research Foundation for the Returned Overseas Chinese Scholars,State Education Ministrythe Scientific Research Fund of Liaoning Provincial Education Department (L2010225)
文摘Chain-like MoS2assemblies consisting of hexagonal MoS2nanoparticles(20-60 nm) have been successfully synthesized in a Triton X-100/cyclohexane/hexanol/water W/O reverse microemulsion in the presence of(NH 4)2MoS 4 as the molybdenum source and NH2OH·HCl as the reducing agent.The products were characterized by X-ray powder diffraction(XRD),transmission electron microscopy(TEM) and UV-vis diffuse reflectance absorption spectra.The influence of synthetic parameters such as acidity,water/oil ratio(0),aging time and annealing temperature on the formation of MoS2assemblies was investigated.TEM analysis showed that these synthetic factors played important roles in controlling the size of MoS2nanoparticles and the length of the chain-like MoS2assemblies.XRD analysis indicated that the well-crystallized MoS2nanoparticles could be obtained by annealing the precursors at 700 C for2h under a flow of N2atmosphere.In addition,the as-prepared chain-like MoS2nanoparticles exhibited excellent photocatalytic H2activity in Ru(bpy) 3 2+-MoS2-H2A three-component molecular systems under visible light irradiation.
