Impacts of ozone on the biomass and yield of rice in open top chambers

The impacts of different 03 concentration on the biomass and yield of rice were studied by using OTC-1 open-top chambers. Experimental treatments included the activated charcoal-filtered air. (CFA), 50 nl/L (CF50), 100 nl/L ( CF100) and 200 nl/L (CF200) concentrations of O-3. The O-3 treatments significantly decreased the total biomass per plant. The. elevated O-3 exposure resulted in a more decrease in the root growth than in the shoot growth. Assessments of yield characteristics at the final harvest revealed an O-3-induced decrease in the number of grains per plant, resulting from fewer ears per plant, fewer grains per ear and more unfilled grains per ear. The 1000 grain dry weight and the harvest index (HI) were not changed significantly under 50 nl/L or 100 nl/L O-3 exposure, but reduced by 17.0% and 4.8% by 200nl/L O-3 treatment, respectively. Compared to the CFA treatment, CF50, CF100 and CF200 treatments caused a 8.2%, 26.1%, 49.1% decrease of the grain yield per plant, and a 14.2%, 31.7%, 51.7% decrease of the total biomass per plant, respectively. Linear regression showed that the 7h - daily mean O-3 concentration exposure for 3 months ( July-September) and AOT40 ( cunulative exposure accumulation over threshold 40 nl/L) were well correlated with the relative grain yield. A yield loss of 10% was estimated to be at 46.9 nl/L O-3 for 7h-daily mean O-3 concentration exposure or at 12930nl/(L(.)h) O-3 for AOT40.

Cannabinoids Increase Mechanosensitivity of Trigeminal Ganglion Neurons Innervating the Inner Walls of Rat Anterior Chambers via Activation of TRPA1

Our previous study found that some trigeminal ganglion（TG） nerve endings in the inner walls of rat anterior chambers were mechanosensitive, and transient receptor potential ankyrin 1（TRPA1） was an essential mechanosensitive channel in the membrane. To address the effect of cannabinoids on the mechanosensitive TG nerve endings in the inner walls of anterior chambers of rat eye, we investigated the effect of the（R）-（＋）-WIN55, 212-2 mesylate salt（WIN）, a synthetic cannabinoid on their cell bodies in vitro. Rat TG neurons innervating the inner walls of the anterior chambers were labeled by 1,1＇-dilinoleyl-3,3,3＇,3＇-tetramethylindocarbocyanine, 4-chlorobenzenesulfona（FAST Di I）. Whole cell patch clamp was performed to record the currents induced by drugs and mechanical stimulation. Mechanical stimulation was applied to the neurons by buffer ejection. WIN evoked inward currents via TRPA1 activation in FAST Di I-labeled TG neurons. WIN enhanced mechanosensitive currents via TRPA1 activation in FAST Di I-labeled TG neurons. Our results indicate that cannabinoids can enhance the mechanosensitivity of TG endings in the inner walls of anterior chambers of rat eye via TRPA1 activation.

Sensitivity of the area method with mono isotopic fission chambers to reactivity changes in subcritical nuclear reactors

High-level waste is an important safety issue in the development of nuclear power.A proposed solution is the transmutation of waste in fast reactors.The exclusion of the risk of supercriticality by using subcritical reactors is currently under development.Controlling the subcriticality level in such reactors presents difficulties.A problem is posed by the so-called space effect observed when using in reactors many neutron detectors in different locations of the core and reflector.Reactivity obtained from measure-ments,for example,by the Sjo¨strand method,differs by nonnegligible values.Numerical corrections can partially improve this situation.The use of a monoisotopic fission chamber set,designed for a given reactor,when each chamber is intended for a specific position in the system,can improve the situation.A question arises about the sensitivity of the results to reactivity changes.This issue is analyzed by computer simulation for possible fissionable and fissile nuclides for the total range of control rod insertion,changes in reactor fuel enrichment,and fuel temperature.The tested sensitivity was satisfactory at most levels from several dozen to several hundred pcm.A case study was conducted using the VENUS-F core model.

The Discovery of Deep High-Resistivity Block and Inadequately Consolidated Magma Chambers in Gaoligongshan Oblique Collisional Orogen and its Tectonic Implications

Objective The Gaoligongshan oblique collisional orogen is located in the southern section of the Hengduan Mountains, and belongs to one of the main Late Yanshanian-Himalayan oblique collisional orogens in the Sanjiang area. Many researchers have studied the geology, geochemistry and geophysics of this region, and many research achievements have been obtained from deep geophysical exploration of the region, especially using the magnetotelluric （MT） sounding technique. However,

LET Monitoring Using Liquid Ionization Chambers

Relative biological effectiveness (RBE) is an important quantity in planning particle beam cancer therapy. In general, the RBE describes the biological effectiveness of a given primary beam with respect to a reference photon irradiation. RBE varies not only for different primary beams but also with depth in the target for a given beam modality. It is not a quantity that easily lends itself to measurements or computation as it depends on many biological and physical quantities. Numerous experiments in vitro using various cell lines and irradiation modalities have shown that a general relationship between RBE and the physical quantity Linear Energy Transfer (LET) exists. Several groups have proposed including LET in the radiation therapy treatment planning instead of the more complicated and elusive RBE. It has been shown that LET is an important quantity to consider in treating radio-resistant tumors. The concept of LET painting has been proposed with the goal of improving tumor control probability (TCP) for hypoxic tumors by focusing high LET radiation on the hypoxic region of the tumor while restricting the surrounding normal tissue to low LET radiation. In order to properly incorporate LET in clinical treatment, it is important to be able to experimentally measure and verify LET distribution. We propose a novel method for measuring LET using a dual chamber methodology exploiting the difference in the observed recombination between air filled ionization chambers (IC) and liquid filled ionization chambers (LIC). The resulting difference in the measured signals will be used to directly extract the relative LET of an actual treatment beam in real time. This paper describes our initial studies of this method, presents preliminary results, and discusses further improvements toward a practical real-time LET measuring device.

Lifetime and shelf life of sealed tritium-filled plasma focus chambers with gas generator

The paper describes the operation features of plasma focus chambers using deuteriumetritium mixture.Handling tritium requires the use of sealed,vacuum-tight plasma focus chambers.In these chambers,there is an accumulation of the impurity gases released from the inside surfaces of the electrodes and the insulator while moving plasma current sheath inside chambers interacting with b-electrons generated due to the decay of tritium.Decay of tritium is also accompanied by the accumulation of helium.Impurities lead to a decreased yield of neutron emission from plasma focus chambers,especially for long term operation.The paper presents an option of absorption type gas generator in the chamber based on porous titanium,which allows to significantly increase the lifetime and shelf life of tritium chambers.It also shows the results of experiments on the comparison of the operation of sealed plasma focus chambers with and without the gas generator.

Absorbed Dose to Water Rate in a Cyberknife VSI System Reference Field Using Ionization Chambers and Gafchromic Films

This work investigated the absorbed dose to water rate under reference conditions in a Cyberknife VSI system using radiochromic films EBT3 and MD-V3 and three ionization chambers: an Exradin A12 and two FC65P Welhöfer Scanditronix with different serial numbers. The correction factor,, was studied using a Varian iX linac and the Cyberknife system. The measurements in the Varian iX were performed in a 10 × 10 cm2 field, 10 cm depth in liquid water at 90 cm and 70 cm SSD and in a 5.4 × 5.4 cm2 field, 10 cm depth at 70 cm SSD to simulate the Cyberknife conditions. In the Cyberknife system, measurements were performed using ionization chambers and both film types at 70 cm SSD and 10 cm depth in its 6 cm diameter reference field. The results indicate that ?is independent of the dosimeters and the evaluation methods. Maximum differences of 0.22% - 0.55% (combined uncertainties of 1.22% - 1.98%, k = 1) are obtained on ?using Varian iX, whereas discrepancies of 2.08% - 2.09% (combined uncertainties of 1.87% - 2.13%, k = 1) are observed using the Cyberknife system. Given the agreement between detectors and the combined standard uncertainties, the data from Varian iX could be considered the most accurate and consequently a weighted average factor of 0.902 ± 0.006 could be used for the Cyberknife VSI system reference field. Within measurement uncertainties, the absorbed dose rate measured in the Cyberknife VSI system reference field was found to be independent of the dosimeters used. These results suggest that the absorbed dose measured at a point within a given field size should be the same, regardless the dosimeter used, if their dosimetric characteristics are well known. This highlighted the importance of performing dosimetry by controlling all parameters that could affect the dosimeter response. One can conclude that radiochromic film dosimetry can be considered as an appropriate alternative for measuring absorbed dose to water rate.

Determination of Bragg Peak Location for Heavy Ion Beam by Ionization Chambers

ＤｅｔｅｒｍｉｎａｔｉｏｎｏｆＢｒａｇｇＰｅａｋＬｏｃａｔｉｏｎｆｏｒＨｅａｖｙＩｏｎＢｅａｍｂｙＩｏｎｉｚａｔｉｏｎＣｈａｍｂｅｒｓ￥ＷｅｉＺｅｎｇｑｕａｎ；ＸｉｅＨｏｎｇｍｅｉ；ＬｉＷｅｎｊｉａｎ；ＬｉＱｉａｎｇ；ＤａｎｇＢｉｎｇｒｏｎｇａｎｄＨ...

DOUBLE LOOP ACTIVE VIBRATION CONTROL OF PNEUMATIC ISOLATOR WITH TWO SEPARATE CHAMBERS

A newly designed pneumatic spring with two separate chambers is promoted and double-loop active control is introduced to overcome the following drawbacks of passive pneumatic isolation： ① The low frequency resonances introduced into the system; ② Conflict between lower isolation frequency and stiffness high enough to limit quasi-static stroke;③ Inconsistent isolation level with different force load. The design of two separate chambers is for the purpose of tuning support frequency and force independently and each chamber is controlled by a different valve. The inner one of double-loop structure is pressure control, and in order to obtain good performance, nonlinearities compensation and motion flow rate compensation （MFRC） are added besides the basic cascade compensation, and the influence of tube length is studied. The outer loop has two functions： one is to eliminate the resonance caused by isolation support and to broaden the isolation frequency band by payload velocity feedback and base velocity feed forward, and the other is to tune support force and support stiffness simultaneously and independently, which means the support force will have no effect on support stiffness. Theoretical analysis and experiment results show that the three drawbacks are overcome simultaneously.

Autologous nerve segment-bridging regeneration chambers for the repair of sciatic nerve defects

Proximal and distal nerve defects exhibit chemotactic growth over certain distances. Our previous studies demonstrated that Schwann cells survive in autologous nerve segments that are bridged by regeneration chambers and secrete various bioactive substances. However, more data are required to determine the required length of regeneration chambers for chemotaxis and nutrition of neural regeneration, as well as the length of repaired nerve defects to replace the effect of autologous nerve grafting. In the present study, sciatic nerve defects of 12, 16, 20 mm were repaired using a regeneration chamber of 6, 8, and 10 mm in length respectively. These were bridged with autologous nerve segments. Results showed that the bridging of two 6-mm long regeneration chambers to repair a 12-mm nerve defect exhibited similar effects to autologous nerve grafting.

Research on the "three shells" cooperative support technology of large-section chambers in deep mines

The"three shells"cooperative support technology was proposed herein according to both the large deformation of the rock surrounding large-section chambers in deep mines and the precarious stability of the support structures therein.The development range of the plastic zone in the surrounding rock was controlled by a stress shell to reduce the difficulty of controlling the surrounding rock.Additionally,the residual strength of the rock mass in the plastic zone and the self-bearing capacity of the surrounding rock were improved by a reinforced load-bearing shell.Furthermore,a passive load-bearing shell could restore the triaxial stress state of the surrounding rock on the free surface,reduce the influence of the external environment on the surrounding rock,and reinforce the surrounding rock with the strength of the shell.Reasonable layouts of large-section chambers were determined by analyzing the control effect of the stress shell on the surrounding rock under three kinds of in situ stress fields.The orthogonal test method was applied to reveal the influences of different support parameters in the reinforced loadbearing shell and passive load-bearing shell on the surrounding rock stability.The surrounding rock control effect of the"three shells"collaborative support technology was analyzed through numerical simulation and field monitoring.The results show that the maximum displacement between the roof and floor of the coal preparation chamber in the Xinjulong coal mine was approximately 48 mm,and the maximum displacement between its two sides was approximately 65 mm,indicating that the technology proposed herein could meet the long-term control requirements of the surrounding rock stability for large-section chambers in deep mines.

Effects of Inlet/Outlet Ducts on Acoustic Attenuation Characteristics of Circular Expansion Chambers

The effect of coaxial, offset and extended inlet/outlet on the acoustic attenuation characteristics of circular expansion chambers are studied by the three-dimensional finite dement method. The numerical results of transmission loss are compared with experiment results to verify the necessary of using three-dimensional methods. Maps of acoustic pressure level distribution inside of chambers and inlet/outlet ducts are given at a frequency to demonstrate the difference of acoustic wave propagation behavior caused by locations of inlet/outlet ducts. For the chambers of the same length, the chamber with extended inlet/outlet duct has higher attenuation ability than coaxial and offset inlet/outlet duct over middle frequencies.

Chemoattractive capacity of different lengths of nerve fragments bridging regeneration chambers for the repair of sciatic nerve defects

A preliminary study by our research group showed that 6-mm-long regeneration chamber bridging is equivalent to autologous nerve transplantation for the repair of 12-mm nerve defects. In this study, we compared the efficacy of different lengths （6, 8, 10 mm） of nerve fragments bridging 6-mm regeneration chambers for the repair of 12-mm-long nerve defects. At 16 weeks after the regeneration chamber was implanted, the number, diameter and myelin sheath thickness of the regenerated nerve fibers, as well as the conduction velocity of the sciatic nerve and gastrocnemius muscle wet weight ratio, were similar to that observed with autologous nerve transplantation. Our results demonstrate that 6-, 8-and 10-mm-long nerve fragments bridging 6-mm regeneration chambers effectively repair 12-mm-long nerve defects. Because the chemoattractive capacity is not affected by the length of the nerve fragment, we suggest adopting 6-mm-long nerve fragments for the repair of peripheral nerve defects.

Converging Parallel Plate Flow Chambers for Studies on the Effect of the Spatial Gradient of Wall Shear Stress on Endothelial Cells

Many in vitro studies focus on effects of wall shear stress (WSS) and wall shear stress gradient (WSSG) on endothelial cells, which are linked to the initiation and progression of atherosclerosis in the arterial system. Limitation in available flow chambers with a constant WSSG in the testing region makes it difficult to quantify cellular responses to WSSG. The current study proposes and characterizes a type of converging parallel plate flow chamber (PPFC) featuring a constant gradient of WSS. A simple formula was derived for the curvature of side walls, which relates WSSG to flow rate (Q), height of the PPFC (h), length of the convergent section (L), its widths at the entrance (w0) and exit (w1). CFD simulation of flow in the chamber is carried out. Constant WSSG is observed in most regions of the top and bottom plates except those in close proximity of side walls. A change in Q or h induces equally proportional changes in WSS and WSSG whereas an alteration in the ratio between w0 and w1 results in a more significant change in WSSG than that in WSS. The current design makes possible an easy quantification of WSSG on endothelial cells in the flow chamber.

Fundamental Laws of Physics and Calculation of Heat Transfer in Combustion Chambers of Gas-Turbine Plants

The laws of heat radiation from black body, the laws of Stefan-Boltzmann, Planck, and Wien are fundamental laws of physics. All in all, a little more than 30 fundamental laws of physics, studied by pupils and students worldwide were disclosed. Scientific disclosure of fundamental laws influences mainly power technology, fuel and energy resources saving. In the late XIX century the laws of heat radiation from gas volumes and the laws of Makarov were disclosed. Since the radiation laws from blackbody are fundamental laws of physics, then the laws of heat radiation from gas volumes are fundamental laws of physics. Effect of using laws of heat radiation from gas volumes on fuel saving, reduction of development pressure on the environment in many countries of the world is shown. Calculation results from heat transfer in combustion chamber of gas-turbine plant are described. The torch in a combustion chamber is modeled by cylindrical gas volumes. Fluxes data from the torch and convective fluxes of cooling air are confirmed by measuring data from chamber-wall temperature.

New Materials for Vacuum Chambers in High Energy Physics

Vacuum chambers must fulfil ultra-high vacuum requirements while withstanding thermo-mechanical loads. This is particularly true in high energy particle accelerator where interactions of particles with matter may induce thermal load, material activation, background… The choice of the material of the vacuum chamber is crucial for the final application. Metals such as stainless steel, copper and aluminium are usually used. Even with outstanding mechanical and physical properties, beryllium is used for very specific applications because of its cost and toxicity.Ceramics such as alumina are usually used for fast magnet vacuum chambers. With the next generation of high energy physics accelerator generation such as CLIC and TLEP, the problematic of high cyclic thermal load induced by synchrotron radiation is raised. This paper aims at defining some figures of merit of different materials with respect to several load scenarios and presents briefly their vacuum compatibility.

Shanghai Drone Photographer Tim Chambers

If you recognize the name Tim Chambers,it may be because he is the man,the myth and the legend that rode every Shanghai Metro line in one go.

Investigation on heat transfer enhancement and pressure loss of double swirl chambers cooling

By merging two standard swirl chambers,an alternative cooling configuration named double swirl chambers(DSC)has been developed.In the DSC cooling configuration,the main physical phenomena of the swirl flow in swirl chamber and the advantages of swirl flow in heat transfer augmentation are maintained.Additionally,three new physical phenomena can be found in DSC cooling configuration,which result in a further improvement of the heat transfer:(1)impingement effect has been observed,(2)internal heat exchange has been enhanced between fluids in two swirls,and(3)“∞”shape swirl has been generated because of cross effect between two chambers,which improves the mixing of the fluids.Because of all these improvements,the DSC cooling configuration leads to a higher globally-averaged thermal performance parameter(Nu/Nu_(∞)/(f/f0)^(1/3))than standard swirl chamber.In particular,at the inlet region,the augmentation of the heat transfer is nearly 7.5 times larger than the fully developed non-swirl turbulent flow and the circumferentially averaged Nusselt number coefficient is 41%larger than the standard swirl chamber.Within the present work,a further investigation on the DSC cooling configuration has been focused on the influence of geometry parameters e.g.merging ratio of chambers and aspect ratio of inlet duct on the cooling perfomance.The results show a very large influence of these geometry parameters in heat transfer enhancement and pressure drop ratio.Compared with the basic configuration of DSC cooling,the improved configuration with 20%to 23%merging ratio shows the highest globally-averaged themal performance parameter.With the same cross section area in tangential inlet ducts,the DSC cooling channel with larger aspect ratio shows larger heat transfer enhancement and at the same time reduced pressure drop ratio,which results in a better globally-averaged themal performance parameter.

Insight into small eyes: a practical description from phenotypes presentations to the management

This narrative review aimed to have an algorithmic approach to microphthalmos by a systematic search.The definition can be related to a number of special phenotypes.In the more challenging cases of complex microphthalmos,relative anterior microphthalmos,and nanophthalmos,the surgeon can approach these cases more safely if they have a deep understanding of the anatomical variations and ideal formulae for intraocular lens computation and knows how to avoid intra-and post-operative complications.In this article,we review the criteria by which we recognize and describe pre-,intra-,and post-operative considerations,as well as discuss the ideal intraocular lenses for microphthalmos,given the intricate varieties of small eye phenotypes.