Performance of the proton exchange membrane fuel cell(PEMFC)is appreciably affected by the channel geometry.The branching structure of a plant leaf and human lung is an efficient network to distribute the nutrients in...Performance of the proton exchange membrane fuel cell(PEMFC)is appreciably affected by the channel geometry.The branching structure of a plant leaf and human lung is an efficient network to distribute the nutrients in the respective systems.The same nutrient transport system can be mimicked in the flow channel design of a PEMFC,to aid even reactant distribution and better water management.In this work,the effect of bio-inspired flow field designs such as lung and leaf channel design bipolar plates,on the performance of a PEMFC was examined experimentally at various operating conditions.A PEMFC of 49 cm2 area,with a Nafion 212 membrane with a 40%catalyst loading of 0.4 mg·cm-2 on the anode side and also 0.6 mg·cm-2 on the cathode side is assembled by incorporating the bio-inspired channel bipolar plate,and was tested on a programmable fuel-cell test station.The impact of the working parameters like reactants’relative humidity(RH),back pressure and fuel cell temperature on the performance of the fuel cell was examined;the operating pressure remains constant at 0.1 MPa.It was observed that the best performance was attained at a back pressure of 0.3 MPa,75°C operating temperature and 100%RH.The three flow channels were also compared at different operating pressures ranging from 0.1 MPa to 0.3 MPa,and the other parameters such as operating temperature,RH and back pressure were set as 75°C,100%and 0.3 MPa.The experimental outcomes of the PEMFC with bio-inspired channels were compared with the experimental results of a conventional triple serpentine flow field.It was observed that among the different flow channel designs considered,the leaf channel design gives the best output in terms of power density.Further,the experimental results of the leaf channel design were compared with those of the interdigitated leaf channel design.The PEMFC with the interdigitated leaf channel design was found to generate 6.72%more power density than the non-interdigitated leaf channel design.The fuel cell with interdigitated leaf channel design generated5.58%more net power density than the fuel cell with non-interdigitated leaf channel design after considering the parasitic losses.展开更多
Nerve guidance channels are limited by lack of topographical guidance：Treatment of sizeable nerve gaps remains problematic following peripheral nerve injury.Functional outcomes are good when neurorrhaphy,or direct en...Nerve guidance channels are limited by lack of topographical guidance：Treatment of sizeable nerve gaps remains problematic following peripheral nerve injury.Functional outcomes are good when neurorrhaphy,or direct end-to-end suture repair,is possible.The problem arises when there is significant segmental loss,which can occur following trauma as well as oncological procedures.展开更多
The subliminal channel is used to send a secret message to an authorized receiver; the message cannot he discovered by any unauthorized receivers. Designated verifier signature （DVS） provide authentication of a mess...The subliminal channel is used to send a secret message to an authorized receiver; the message cannot he discovered by any unauthorized receivers. Designated verifier signature （DVS） provide authentication of a message, we design a DVS scheme with message recovery mechanism and use it as a subliminal channel. In order to share a message among n users securely and allows t or more users can reconstruct the secret in dynamic groups, we combine both subliminal channel and （t, n） threshold cryptography. Then we proposed a threshold subliminal channel which can convey a subliminal message to a group of users based on message-recovery designated verifier signatures. Reconstructing the subliminal message relies on the cooperation of t or more users in the group and they can verify the validity of the subliminal message. Security and performance analysis show that the proposed scheme is secure and efficient.展开更多
Cellular vehicle-to-everything(C-V2X) communications is regarded as a promising and feasible solution for 5G-enabled vehicular communications and networking. In this paper, we investigate the pilot design and channel ...Cellular vehicle-to-everything(C-V2X) communications is regarded as a promising and feasible solution for 5G-enabled vehicular communications and networking. In this paper, we investigate the pilot design and channel estimation problem in MIMO-OFDM-based C-V2X systems with severe co-channel interference due to spectrum reusing among different V2X communication links. By using zero-correlation zone(ZCZ) sequences, we provide an interference-free pilot design scheme and a corresponding time-domain(TD) correlation-based channel estimation(TD-CCE) method. We employ the ZCZ sequences from the same family set to be designed as the TD pilot symbols and guarantee the pilot sequeneces for neighboring V2X communication links are code-division multiplexing(CDM). The co-channel pilot interference of the deisgned pilot symbols can be effectively eliminated by exploiting the provided TD-CCE method. Simulation results indicate that the accuracy of channel estimation can be effectively improved by the proposed scheme, whose performance is close to that of the non-interference situation.展开更多
We propose a method to estimate the average fidelity using the unitary 2t-design of a twirled noisy channel, which is suitable for large-scale quantum circuits. Compared with the unitary 2-design in randomized benchma...We propose a method to estimate the average fidelity using the unitary 2t-design of a twirled noisy channel, which is suitable for large-scale quantum circuits. Compared with the unitary 2-design in randomized benchmarking, the unitary2t-design for the twirling of noisy channels is more flexible in construction and can provide more information. In addition,we prove that the proposed method provides an efficient and reliable estimation of the average fidelity in benchmarking multistage quantum gates and estimating the weakly gate-and time-dependent noise. For time-dependent noise, we provide a scheme of moment superoperator to analyze the noise in different experiments. In particular, we give a lower bound on the average fidelity of a channel with imperfect implementation of benchmarking and state preparation and measurement errors(SPAM).展开更多
There are two main opposing views in the wireless industry on the feasibility of developing 5th generation(5G) cellular networks in mm-Wave bands. The optimistic view is based on the fact that the path loss in mm Wave...There are two main opposing views in the wireless industry on the feasibility of developing 5th generation(5G) cellular networks in mm-Wave bands. The optimistic view is based on the fact that the path loss in mm Wave bands is not significantly worse than that in cellular bands when beamforming gain is also considered. The cautious view points out the significant blockage issues due to the lack of diffraction and adequate penetration in mm Wave bands. The implementation of 5G mm Wave cellular networks also faces major challenges due to the high link budget needed for long- range communication and the strong dependency on beamforming technology. This paper addresses some of these fundamental technology issues, from mm Wave channel characters and channel modeling to the implications on system and network architecture design.Although we believe that mm Wave can be used for 5G networks, we show that the air interface, device and network design will be very different from existing cellular design.展开更多
文摘Performance of the proton exchange membrane fuel cell(PEMFC)is appreciably affected by the channel geometry.The branching structure of a plant leaf and human lung is an efficient network to distribute the nutrients in the respective systems.The same nutrient transport system can be mimicked in the flow channel design of a PEMFC,to aid even reactant distribution and better water management.In this work,the effect of bio-inspired flow field designs such as lung and leaf channel design bipolar plates,on the performance of a PEMFC was examined experimentally at various operating conditions.A PEMFC of 49 cm2 area,with a Nafion 212 membrane with a 40%catalyst loading of 0.4 mg·cm-2 on the anode side and also 0.6 mg·cm-2 on the cathode side is assembled by incorporating the bio-inspired channel bipolar plate,and was tested on a programmable fuel-cell test station.The impact of the working parameters like reactants’relative humidity(RH),back pressure and fuel cell temperature on the performance of the fuel cell was examined;the operating pressure remains constant at 0.1 MPa.It was observed that the best performance was attained at a back pressure of 0.3 MPa,75°C operating temperature and 100%RH.The three flow channels were also compared at different operating pressures ranging from 0.1 MPa to 0.3 MPa,and the other parameters such as operating temperature,RH and back pressure were set as 75°C,100%and 0.3 MPa.The experimental outcomes of the PEMFC with bio-inspired channels were compared with the experimental results of a conventional triple serpentine flow field.It was observed that among the different flow channel designs considered,the leaf channel design gives the best output in terms of power density.Further,the experimental results of the leaf channel design were compared with those of the interdigitated leaf channel design.The PEMFC with the interdigitated leaf channel design was found to generate 6.72%more power density than the non-interdigitated leaf channel design.The fuel cell with interdigitated leaf channel design generated5.58%more net power density than the fuel cell with non-interdigitated leaf channel design after considering the parasitic losses.
文摘Nerve guidance channels are limited by lack of topographical guidance：Treatment of sizeable nerve gaps remains problematic following peripheral nerve injury.Functional outcomes are good when neurorrhaphy,or direct end-to-end suture repair,is possible.The problem arises when there is significant segmental loss,which can occur following trauma as well as oncological procedures.
基金Supported by the National Natural Science Foun-dation of China (60403027)
文摘The subliminal channel is used to send a secret message to an authorized receiver; the message cannot he discovered by any unauthorized receivers. Designated verifier signature （DVS） provide authentication of a message, we design a DVS scheme with message recovery mechanism and use it as a subliminal channel. In order to share a message among n users securely and allows t or more users can reconstruct the secret in dynamic groups, we combine both subliminal channel and （t, n） threshold cryptography. Then we proposed a threshold subliminal channel which can convey a subliminal message to a group of users based on message-recovery designated verifier signatures. Reconstructing the subliminal message relies on the cooperation of t or more users in the group and they can verify the validity of the subliminal message. Security and performance analysis show that the proposed scheme is secure and efficient.
文摘Cellular vehicle-to-everything(C-V2X) communications is regarded as a promising and feasible solution for 5G-enabled vehicular communications and networking. In this paper, we investigate the pilot design and channel estimation problem in MIMO-OFDM-based C-V2X systems with severe co-channel interference due to spectrum reusing among different V2X communication links. By using zero-correlation zone(ZCZ) sequences, we provide an interference-free pilot design scheme and a corresponding time-domain(TD) correlation-based channel estimation(TD-CCE) method. We employ the ZCZ sequences from the same family set to be designed as the TD pilot symbols and guarantee the pilot sequeneces for neighboring V2X communication links are code-division multiplexing(CDM). The co-channel pilot interference of the deisgned pilot symbols can be effectively eliminated by exploiting the provided TD-CCE method. Simulation results indicate that the accuracy of channel estimation can be effectively improved by the proposed scheme, whose performance is close to that of the non-interference situation.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61372076 and 61701375)the 111 Project,China(Grant No.B08038)+1 种基金the Key Research and Development Plan of Shannxi Province,China(Grant No.BBD24017290001)the Foundation of Science and Technology on Communication Networks Laboratory,China(Grant No.KX172600031)
文摘We propose a method to estimate the average fidelity using the unitary 2t-design of a twirled noisy channel, which is suitable for large-scale quantum circuits. Compared with the unitary 2-design in randomized benchmarking, the unitary2t-design for the twirling of noisy channels is more flexible in construction and can provide more information. In addition,we prove that the proposed method provides an efficient and reliable estimation of the average fidelity in benchmarking multistage quantum gates and estimating the weakly gate-and time-dependent noise. For time-dependent noise, we provide a scheme of moment superoperator to analyze the noise in different experiments. In particular, we give a lower bound on the average fidelity of a channel with imperfect implementation of benchmarking and state preparation and measurement errors(SPAM).
文摘There are two main opposing views in the wireless industry on the feasibility of developing 5th generation(5G) cellular networks in mm-Wave bands. The optimistic view is based on the fact that the path loss in mm Wave bands is not significantly worse than that in cellular bands when beamforming gain is also considered. The cautious view points out the significant blockage issues due to the lack of diffraction and adequate penetration in mm Wave bands. The implementation of 5G mm Wave cellular networks also faces major challenges due to the high link budget needed for long- range communication and the strong dependency on beamforming technology. This paper addresses some of these fundamental technology issues, from mm Wave channel characters and channel modeling to the implications on system and network architecture design.Although we believe that mm Wave can be used for 5G networks, we show that the air interface, device and network design will be very different from existing cellular design.
