Photosynthetic characteristics and nitrogen distribution of large-spike wheat in Northwest China

The leaf photosynthesis and nitrogen（N） translocation in three large-spike lines and control cultivar（Xi＇nong 979） of winter wheat（Triticum aestivum L.） were studied in 2010–2011 and 2011–2012. The objectives of this study were to investigate the differences in the physiological characteristics of large-spike lines and control cultivar and identify the limiting factors that play a role in improving the yield of breeding materials. The average yield, grain number per spike, kernel weight per spike, and 1 000-kernel weight of the large-spike lines were 16.0, 26.8, 42.6, and 15.4%, respectively, significantly higher than those of control. The average photosynthetic rates（Pn） were not significant between the large-spike lines and control cultivar during the active growth period. The average PSII maximum energy conversion efficiency（Fv/Fm）, PSII actual quantum efficiency（Ф（PSII））, photochemical quenching coefficient（qP）, PSII reaction center activity（Fv′/Fm′） and water-use efficiency（WUE） of the large-spike lines were 1.0, 5.1, 3.6, 0.8, and 43.4%, respectively, higher than those of the control during the active growth stages. The N distribution proportions in different tissues were ranked in the order of grains〉culms＋sheathes〉rachis＋glumes〉flag leaves〉penultimate leaves〉remain leaves. This study suggested that utilization of the large-spike wheat might be a promising approach to obtain higher grain yield in Northwest China.

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum(Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed,and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction(diffusion and kinetic) between the Al powder and the detonation products;the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.

ESTABLISHMENT OF A MAMMARY CANCER CELL LINE Ca 761-86 AND ITS BIOLOGICAL CHARACTERISTICS IN INBRED 615 MICE

A cell line designated as Ca 761-86 has been established from the solid mouse mammary cancer (Ca 761) by suspension culture. It has been passaged for more than 212 generations. Moderate round cells were predominant and most of them were mononuclear. Some characteristics of malignant cells and A-type viral-like particles were observed by electron microscopy. The results of cytochemical studies (DNA, RNA, SDH, 5' AMPase, ACP etc.) were comparable to the ultramicroscopic results. It multiplied approximately 27.4 fold on day 5 with mitotic index reaching 1.8% on day 3. This cell line was a hyperdiploid with karyotype of 45 or 45, -2X, tril2, tri17, +M1-5. Cell agglutination was observed when treated with ConA (≥7 fig, ml). Spontaneous agglutination might also take place without adding any ConA. After 5×106 cells of Ca 761-86 suspension were transplanted into the normal inbred 615 mice by different ways (subcutan eous, intrafoot-pad or intraperitoneal), the transplan lability rate reached 100%. Spontaneous remission was never observed and its metastatic ability reserved. PPLO were not detected. Ca 761-86 may be of value for practical purposes.

Simple waves for two-dimensional compressible pseudo-steady Euler system

A simple wave is defined as a flow in a region whose image is a curve in the phase space. It is well known that ＂the theory of simple waves is fundamental in building up the solutions of flow problems out of elementary flow patterns＂ see Courant and Friedrichs＇s chassical book ＂Supersonic Flow and Shock Waves＂. This paper mainly concerned with the geometric construction of simple waves for the 2D pseudo-steady compressible Euler system. Based on the geometric interpretation, the expansion or compression simple wave flow construction around a pseudo-stream line with a bend part are constructed. It is a building block that appears in the global solution to four contact discontinuities Riemann problems.

Curved surface effect and emission on silicon nanostructures

The curved surface （CS） effect on nanosilicon plays a main role in the activation for emission and photonic manipulation. The CS effect breaks the symmetrical shape of nanosilicon on which some bonds can produce localized electron states in the band gap. The investigation in calculation and experiment demonstrates that the different curvatures can form the characteristic electron states for some special bonding on the nanosilicon surface, which are related to a series of peaks in photoluminecience （PL）, such as LN, LNO, Lo1, and Lo2 lines in PL spectra due to Si-N, Si-NO, Si=O, and Si-O-Si bonds on curved surface, respectively. Si-Yb bond on curved surface of Si nanostructures can provide the localized states in the band gap deeply and manipulate the emission wavelength into the window of optical communication by the CS effect, which is marked as the Lyb line of electroluminescence （EL） emission.

The breeding of two polyploid rice lines with the characteristic of polyploid meiosis stability

Polyploidization is a basic feature of plant evolution. Nearly all of the main food, cotton and oil crops are polyploid. When ploidy levels increase, yields double; this phenomenon suggested a new strategy of rice breeding that utilizes wide crosses and polyploidization dual advantages to breed super rice. Because low seed set rates in polyploid rice usually makes it difficult to breed, the selection of Ph-liked gene lines was emphasized. After progenies of indica-japonica were identified and selected, two poly- ploid lines, PMeS-1 and PMeS-2 with Polyploid Meiosis Stability (PMeS) genes were bred. The proce- dure included seven steps: selecting parents, crossing or multiple crossing, back-crossing, doubling chromosomes, identifying the polyploid, and choosing plants with high seed set rates that can breed themselves into stable lines. The characteristics of PMeS were determined by observing meiotic be- haviors and by cross-identification of seed sets. PMeS-1 and PMeS-2, (japonica rice), have several characteristics different from other polyploid rice lines, including a higher rate of seed set (more than 65%, increasing to more than 70% in their F1 offspring); and stable meiotic behaviors (pairing with bi- valents and quarivalents nearly without over-quarivalent in prophase, nearly without lagging chromo- somes in metaphase and without micronuclei in anaphase and telophase). The latter was obviously different from control polyploid line Dure-4X, which displayed abnormal meiotic behaviors including a higher rate of multivalents, univalents and trivalents in prophase, lagging chromosomes in metaphase and micronuclei in anaphase and telophase. There were also three differences of the breeding method between PMeS lines and normal diploid lines: chromosomes doubling, polyploidism identifying and higher seed set testing. The selection of PMeS lines is the first step in polyploid rice breeding; their use will advance the progress of polyploid rice breeding, which will in turn offer a new way to breed super rice.

Predicting air pressure in drainage stack of high-rise building

It is necessary to understand the features of air pressure in a drainage stack of a high-rise building for properly designing and operating a drainage system. This paper presents a mathematical model for predicting the stack performance. A step function is used to describe the effect of the air entrainment caused by the water discharged from branch pipes. An additional source term is introduced to reflect the gas-liquid interphase interaction （GLII） and stack base effect. The drainage stack is divided into upper and base parts. The air pressure in the upper part is predicted by a total variation diminishing （TVD） scheme, while in the base part, it is predicted by a characteristic line method （CLM）. The predicted results are compared with the data measured in a real-scale high- rise test building. It is found that the additional source term in the present model is effective. It intensively influences the air pressure distribution in the stack. The air pressure is also sensitive to the velocity-adjusting parameter （VAP）, the branch pipe air entrainment, and the conditions on the stack bottom.

The Value of Different GA Insensitive Rht Dwarfing Genes in Winter Wheat Breeding

The value of different dwarfing genes in winter wheat breeding was studied using 6 near-isogenic lines carrying different Rht dwarfing genes over three years experiment.Results showed that both the Rht1 and Rht2 semi-dwarfing genes had significantlypositive effects on kernel number and grain weight per spike, and had significantlynegative effects on 1000-grain weight comparing to the tall line(rht) and the Rht3 line.The Rht3 dwarfing gene had a significantly negative effect on kernel number per spike,and had positive effect on 1000-grain weight. The combination of the Rht2 and Rht3 geneshowed significantly negative effect on yield components. All of these 5 dwarfing orsemidwarfing genotypes mentioned above had a significantly negative effect on plantheight and no significant effect on the area of flag leaf, spikelets per spike and spikelength.

Spatial and Time Structure of a Gravity Wave in Horizontal Atmosphere of Heterogeneous Stratification

By the use of the WKBJ method combined with the characteristic line method, the asymptotic solution of a gravity wave envelope in the atmosphere of horizontal heterogeneous stratification and time-varying stratification is obtained. The solution shows that not only the variation of amplitude of the gravity wave but also the variation of wavelength and the width of the envelope are affected by the horizontal heterogeneity. As the wave envelope moves from a region, of strong stratification to a weak one, the horizontal wavelength will become shorter, the width of the envelope will narrow and its amplitude will increase. The variation of stratification with time cannot lead to the variation of wavelength and envelope width, but the amplitude of the wave envelope will increase while the amplitude of the wave decreases in time.

Introduction to an Invariant Quantity Method

It is impossible,mathematically, to use a time series which is regarded as a set of observational facts of a dynamicsystem to reconstruct the particular system.Physically, however, with a few assumptions put, a dynamic system canbe rebuilt approximately by means of observational facts.This is the goal of the so called invariant quantity method(IQM),whose research and experiment are of potential significance to atmospheric sciences.

Primary Study on Microarc Oxidation of AZ91D

The magnesium has some excellent properties such as ligh quality, high specific strength and stiffness, high damp and reeoverd easily compared with steel, aluminium, engineering plastic. So the application and exploitation of magnesium arose extensive attention of the public.

Unified characteristics line theory of spacial axisymmetric plastic problem

The unified strength theory proposed by Yu in 1991 is extended to spacial axisymmetric problem. A unified spacial axismymmetric characteristics line theory based on the unified strength theory is proposed. This theory takes account of different effects of intermediate principal stress on yielding or failure and the SD effect (tensile-compression strength difference) of materials. Various conventional axisymmetric characteristics line theories, which are based on the Haar-von Karman plastic condition, Szczepinski hypothesis, Tresca criterion, von Mises criterion and Mohr-Coulomb theory, are special cases of the new theory. Besides, a series of new spacial axisymmetric characteristics fields for different materials can be introduced. It forms a unified spacial axisymmetric characteristics theory. Two examples are calculated with the new theory, the results are compared with those obtained by the finite element program UEPP and those based on the Mohr-Coulomb strength theory. It is shown that the new theory is reliable and feasible. The economic benefit can be obtained from the engineering application of the new theory.

Establishment and biological characteristics of human multiple myeloma cell line CZ-1

Background There were only 3 multiple myeloma (MM) cell lines established in China. In this study,we succeeded in establishing a novel MM cell line and analyzed its biological characteristics. Methods Mononuclear cells isolated from the peripheral blood (PB) and bone marrow (BM) of a patient with advanced MM (λ light chain type) were cultured in medium. Cell morphology was analyzed by Wright-Giemsa-staining and cytochemical staining,immunophenotyping by flow cytometry and cytogenetic analysis by chromosome RHG-banding technique. Quantitative fluorescent polymerase chain reaction (PCR) was used to detect Epstein - Barr virus (EBV) DNA. Results The established cell line could survive and proliferate in the presence of feeder cells or conditioned medium. The cells secreted λ light chain and were negative for EBV. The Wright-Giemsa-staining showed typical plasmablast or plasma cell morphology. The cytochemical staining of the cells showed the following reactivity patterns: positive for acid phosphatase,negative for myeloperoxidase. The immunoprofile of the cells was concordant with that of MM cells: positive for CD_ 10 ,CD_ 28 ,CD_ 38 ,CD_ 138 ,CD_ 56 ,CD_ 49d ,CD_ 44 ,CD_ 54 and CD_ 58 ,negative for CD_ 19 , CD_ 40 ,CD_ 95 ,CD_ 95L ,CD_ 34 ,CD_2 and CD_5. The cytogenetic analysis showed complex chromosome abnormality of i (1q+),8q+,13q+,i (17q),i (18q) and +M. There was no difference in morphology,immunophenotype and cytogenetics between cells from PB and BM. Conclusions An MM cell line secreting λ light chain named CZ-1 was established. The cells from both PB and BM have the same biological characteristics.

Dynamic modeling of thermal conditions for hot-water district-heating networks

To investigate the dynamic characteristics of the thermal conditions of hot-water district-heating networks, a dynamic modeling method is proposed with consideration of the heat dissipations in pipes and the characteristic line method is adopted to solve it. Besides, the influences of different errors, space steps and initial values on the convergence of the dynamic model results are analyzed for a model network. Finally, a part of a certain city district-heating system is simulated and the results are compared with the actual operation data in half an hour from 6 secondary heat stations. The results indicate that the relative errors for the supply pressure and temperature in 5 stations are all within 2%, except in one station, where the relative error approaches 4%. So the proposed model and algorithm are validated.

Size Effect on Onset and Subsequent Evolution of Adiabatic Shear Band:Theoretical and Numerical Analysis

The adiabatic shear instability of ductile materials has attracted more and more attentions of researchers and groups,who have been sparing no effort in further understanding of the underlying mechanism since the first experimental depiction of adiabatic shear instability by Zener and Hollomon.As for the adiabatic shear instability,many factors account for its occurrence,including heat conduction,inertia effect,microstructure effect and so on.However,lots of experimental evidence has shown that metal materials display a strong size effect when the characteristic length scale is in the order of microns.The size effect has also been observed in the analysis of shear band in the ductile materials because the order of the bandwidth stays within the microscale range.However,a comprehensive understanding of the whole process of adiabatic shear banding(ASB),including the early onset and the subsequent evolution,is still lacking.In this work,a gradient plasticity model based on the Taylor-based nonlocal theory feasible for the linear perturbation analysis and convenient for numerical calculation is proposed to investigate the strain gradient on the onset of ASB and the coupling effect of heat conduction,inertia effect and strain gradient at the early stage,as well as on the subsequent evolution process at later stages.As for the onset of ASB,the linear perturbation method is used to consider the effect on the initial formation of ASB.After the investigation of the onset of ASB.the characteristic line method is applied to describe the subsequent nonlinear evolution process of ASB.Three stages of ASB evolution are clearly depicted during the evolution process,and the significance of size effect on the ASB nonlinear evolution process of ASB at different stages is analyzed.With the help of linear perturbation analysis and characteristic line method,a comprehensive description of the role of strain gradient in the ASB from the early onset to the end of the evolution is provided.