Reservoir characteristics and formation model of Upper Carboniferous bauxite series in eastern Ordos Basin,NW China

Through core observation,thin section identification,X-ray diffraction analysis,scanning electron microscopy,and low-temperature nitrogen adsorption and isothermal adsorption experiments,the lithology and pore characteristics of the Upper Carboniferous bauxite series in eastern Ordos Basin were analyzed to reveal the formation and evolution process of the bauxite reservoirs.A petrological nomenclature and classification scheme for bauxitic rocks based on three units(aluminum hydroxides,iron minerals and clay minerals)is proposed.It is found that bauxitic mudstone is in the form of dense massive and clastic structures,while the(clayey)bauxite is of dense massive,pisolite,oolite,porous soil and clastic structures.Both bauxitic mudstone and bauxite reservoirs develop dissolution pores,intercrystalline pores,and microfractures as the dominant gas storage space,with the porosity less than 10% and mesopores in dominance.The bauxite series in the North China Craton can be divided into five sections,i.e.,ferrilite(Shanxi-style iron ore,section A),bauxitic mudstone(section B),bauxite(section C),bauxite mudstone(debris-containing,section D)and dark mudstone-coal section(section E).The burrow/funnel filling,lenticular,layered/massive bauxite deposits occur separately in the karst platforms,gentle slopes and low-lying areas.The karst platforms and gentle slopes are conducive to surface water leaching,with strong karstification,well-developed pores,large reservoir thickness and good physical properties,but poor strata continuity.The low-lying areas have poor physical properties but relatively continuous and stable reservoirs.The gas enrichment in bauxites is jointly controlled by source rock,reservoir rock and fractures.This recognition provides geological basis for the exploration and development of natural gas in the Upper Carboniferous in the study area and similar bauxite systems.

Geological conditions and reservoir characteristics of various shales in major shalehosted regions of China

China is home to shales of three facies:Marine shale,continental shale,and marine-continental transitional shale.Different types of shale gas are associated with significantly different formation conditions and major controlling factors.This study compared the geological characteristics of various shales and analyzed the influences of different parameters on the formation and accumulation of shale gas.In general,shales in China’s several regions exhibit high total organic carbon(TOC)contents,which lays a sound material basis for shale gas generation.Marine strata generally show high degrees of thermal evolution.In contrast,continental shales manifest low degrees of thermal evolution,necessitating focusing on areas with relatively high degrees of thermal evolution in the process of shale gas surveys for these shales.The shales of the Wufeng and Silurian formations constitute the most favorable shale gas reservoirs since they exhibit the highest porosity among the three types of shales.These shales are followed by those in the Niutitang and Longtan formations.In contrast,the shales of the Doushantuo,Yanchang,and Qingshankou formations manifest low porosities.Furthermore,the shales of the Wufeng and Longmaxi formations exhibit high brittle mineral contents.Despite a low siliceous mineral content,the shales of the Doushantuo Formation feature a high carbonate mineral content,which can increase the shales’brittleness to some extent.For marine-continental transitional shales,where thin interbeds of tight sandstone with unequal thicknesses are generally found,it is recommended that fracturing combined with drainage of multiple sets of lithologic strata should be employed to enhance their shale gas production.

Baoziwan-Majiashan Area of Jiyuan Oilfield Analysis of Reservoir Characteristics and Main Control Factors in Long 4 5 Section

Based on the sheet, scanning electron microscope and high pressure mercury analysis method, this paper takes Jiyuan oilfield-Ma Jia mountain district 4 5 sandstone reservoir as the research object, from the reservoir petrology, pore type and porosity, permeability, the system analyzed the reservoir characteristics and its control factors. The results show that the sandstone in the 4 5 section of Baoziwan-Majiashan area of Jiyuan oilfield is fine in size and high in filling content. The pore types were dominated by intergranular pores and dissolved pores, with a low face rate. The reservoir property is relatively poor, with mean porosity of 11.11% and mean permeability of 1.16 × 10−3 µm2. In the low porous, low otonic background, the development of relatively high pore hypertonic areas. Compaction and cementation should play a destructive role in reservoir properties, and dissolution should play a positive role in reservoir properties. Compaction adjusts the migration of clay minerals and miscellaneous bases in the original sediment in the study area, greatly reducing the porosity and permeability of the reservoir;the development of the cement cement, carbonate cementation and some quartz secondary compounds reduces the storage space;the dissolution effect, especially the secondary dissolution pores of the reservoir, which obviously improves the properties of the reservoir.

Reservoir Characteristics and Main Controlling Factors of the Flow III Section of the K Oilfield in the Weixinan Depression

In order to clarify the reservoir characteristics and main controlling factors of the flow three section of the K oil field in the Weixinan Depression, a study on the reservoir characteristics and main controlling factors of the flow three section of the K oil field in the Weixinan Depression has been carried out by utilizing the data of cores, casting thin sections, physical property tests and logging wells. The results show that the lithology of the reservoir in the flow three section of the study area is dominated by coarse sandstone and medium sandstone, followed by conglomerate-bearing sandstone and sand conglomerate. The porosity is mainly distributed in the range of medium-high porosity, and the permeability is mainly medium seepage, and the overall physical properties are good. The three sections of the stream in the study area mainly include four sedimentary microphases, namely, underwater diversion channel, estuarine dam, mat sand and inter-diversion bay. The underwater diversion channel has the best physical properties, characterized by coarse grains and low mud content. The medium and coarse sand content of various lithologic reservoirs is the main factor in the formation of high-quality reservoirs. Rock-forming action is an important factor affecting the physical properties of local reservoirs, comparing the compaction, cementation and dissolution between different sedimentary microphases, the underwater diverging river has the lowest rate of compaction and pore reduction, the highest rate of pore increase by dissolution, and the best physical properties. Therefore, the weakly cemented-strongly dissolved coarse sandstone phase developed in the microphase of the underwater diversion channel in section 3 of the flow in the study area is the most favorable reservoir.

The source and formation characteristics of the Zhujiadun gas reservoirs in the Yancheng Sag, Subei Basin

The Yancheng Sag is a favorable exploration area in the Subei Basin. However, the key geological understanding of the natural gas source and reservoir formation characteristics of the sag is still controversial. Based on a set of organic geochemical experiments conducted on natural gas and associated condensate oil of the first member of the Funing Formation (E1f1) in well YCh5 and well data analysis, the oil-gas resources and reservoir formation model in the Zhujiadun gas reservoir in the Yancheng Sag, Subei Basin, were investigated. The results of this study are as follows. (1) The natural gas in the Zhujiadun gas reservoir is dry gas with high methane content, low heavy hydrocarbon content, and high maturity. The characteristics of carbon and hydrogen isotopes in the natural gas indicate that the natural gas is oil-cracked gas, which mainly originates from the source rocks of the Permian Qixia Formation. (2) The condensate oil from well YCh5 with a high degree of maturity has a high pristane/phytane ratio, low gamma-paraffin abundance, and low tricyclic terpene abundance, indicating a mixture of the Upper Paleozoic condensate oil and Cenozoic crude oil. The saturated and aromatic hydrocarbons have similar δ13C values to the Cenozoic continental crude oil. These features suggest two sources of condensate oil. (3) Oils generated from the source rocks of the Qixia Formation were cracked into highly mature gas after deep burial, which migrated along large faults into the sandstones of the E1f1 and K1t1 members. This type of reservoir was effectively preserved beneath the overlying mudstone cap rocks. Therefore, it can be inferred that a play fairway might occur in the eastern zone of the faults connected to the Paleozoic source rocks in the Yancheng Sag since this zone has similar petroleum geological conditions to well YCh5. Therefore, this zone is a favorable area for further exploration.

Reservoir characteristics of Datta Formation (Early Jurassic), Marwat-Khisor Ranges, sub-Himalayas, Pakistan

The present work has been accomplished to carry out a detailed study of the characteristics of the Early Jurassic Datta Formation of Trans-Indus Ranges, Pakistan. The discovery of Saib well-1 (Gas and condensate discovery from Jurassic limestone) in the study basin takes an active interest in carrying out extensive exploration activities in the same basin. Jurassic rocks especially Datta Sandstone and Samana Suk Limestone are acting as good reservoirs. The study unit consists of variegated sandstone interbedded with siltstone, carbonaceous clay, and shale and coal stringer. For the current work, two stratigraphic sections (Pezu and Abbo Wanda) have been measured. To examine its sedimentology, depositional environment, diagenetic settings, and reservoir characteristics, a detailed study was conducted and various laboratory techniques have been utilized. About 95 rock samples from the bottom to the top of both sections were collected, and 50 rock samples have been selected for thin section analysis and were examined under a polarizing microscope to show their mineralogical composition, diagenesis, and their reservoir characteristics. XRD (X-ray diffraction), Cathodoluminescence (CL), SEM (Scanning electron microscope) with EDS (Energy-dispersive spectroscope), and Core plug porosity and permeability analysis have been used to interpret its chemical and mineralogical composition and its reservoir characteristics, respectively. Based on field observations and thin section analysis, four depositional facies and six lithofacies have been established. The sedimentary structures, depositional facies, and lithofacies indicate that Datta Formation was deposited in a deltaic environment. Compactions, cementation, fracturing and dissolution can greatly affect the quality of reservoir rock. Based on thin section and SEM analysis, large numbers of primary pores, fracture and secondary pores were observed and connectivity between the pores is good, and at some places, these pores were filled through the authigenic clay minerals like kaolinite, mixed layers illite/smectite and chlorite that influences the reservoir characteristics. Primary pores (thin section) and secondary pores (dissolution pores) and core plug porosity and permeability data (porosity 13.23%-26.89% and permeability 0.12 to 149 mD) shows that Datta Formation has a good reservoir quality.

Research on Pore Structure and Fractal Characteristics of Tight Sandstone Reservoir Based on High-Pressure Mercury Injection Method

Pore structure is the key element of tight sandstone reservoir, which restricts the accumulation and flow of oil and gas in the reservoir. At present, reservoir pore structure is the focus and difficulty of unconventional oil and gas exploration and development research. The tight sandstone reservoir in the Chang 4 + 5 member of the Upper Triassic Yanchang Formation is the main reservoir for oil and gas exploration in G area. At present, there is little research on its pore structure and fractal characteristics, which to some extent affects the progress of exploration and development. This paper selects the tight core samples of the Chang 4 + 5 member in the southern edge of the Ordos Basin, and based on the high-pressure mercury intrusion experiment, uses fractal theory to study the pore structure and fractal characteristics of the reservoir in the study area, thus providing theoretical basis for the evaluation and exploration and development of the Chang 4 + 5 tight reservoir in the G area. The research results show that the lithology of the Chang 4 + 5 tight sandstone reservoir in the southern edge of the Ordos Basin is mainly feldspathic sandstone, with the highest feldspar content, followed by quartz, and the clay mineral is mainly chlorite. The reservoir has poor physical properties and strong heterogeneity. There are three main fractal characteristics in Chang 4 + 5 reservoir in G area: the fractal curve of Type I reservoir sample is in two segments, the relatively large pore has certain fractal characteristics, the pore structure is relatively regular, and the heterogeneity is weak;Relatively small pores have no fractal characteristics and pore structure is irregular. The fractal curve of Type II reservoir samples shows a three-segment pattern, and each pore size range has certain fractal characteristics, and it gradually gets better with the increase of pore size. The fractal curve of Type III reservoir samples presents a similar one-segment pattern, and the fractal dimension exceeds the upper limit of 3. It is considered that the full pore size of this type of reservoir does not have fractal characteristics, the pore throat is completely irregular or the surface is rough, and the heterogeneity is very strong.

Reservoir Characteristics and Favorable Area Prediction of Chang-6 Reservoir in Zhouguan Area, Ordos Basin

Based on the analysis of a large number of core samples, logging results, logging interpretation data and dynamic data in the study area, the characteristics of Chang 6 reservoir in Zhouguan area of Baihe area are studied, and the favorable reservoir areas in the study area are predicted. The results show that the lithology of Chang 6 reservoir is mainly light gray and gray fine-grained to very fine-grained feldspar lithic sandstone. The pore types are mainly residual intergranular pores and feldspar dissolved pores, including debris dissolved pores and microfractures. The porosity and permeability values are low, which belongs to low porosity-low permeability and ultra-low permeability reservoirs. According to the reservoir distribution characteristics and related data, the Chang 6 reservoir in the study area is divided into two types, mainly Class II and Class III reservoirs. The comprehensive evaluation predicts that the spatial distribution of the favorable area of Chang 6 reservoir is not uniform, but the distribution area is large, which has broad exploration and development value, and provides the necessary conditions for the distribution study of the favorable oil-bearing zone in this area and the preparation for the next exploration and development.

Experimental Study on Phase Characteristics of CO2 Injection in BZ13-2 Strong Volatile Oil Reservoir in Bohai Sea Buried Hills

BZ13-2 oil field is a deep submerged strongly volatile reservoir in Bohai Sea. This oil reservoir has the characteristics of high gas oil ratio and small difference in formation pressure and saturation point pressure. It usually adopts gas injection development to avoid crude oil degassing and fast decreasing production capacity. However, the phase characteristics and miscibility mechanism of this high-temperature and high-pressure fluid after gas injection are not clear. Therefore, it is necessary to study the feasibility of CO2 injection to improve oil recovery in near critical volatile oil reservoirs through CO2 injection experiments. In the early stage of the depletion experiment, the content of heavy components in the remaining oil increased significantly, so the depletion method is not conducive to the development of such reservoirs. With the increase of CO2 injection, the volumetric expansion coefficient of formation crude oil increases significantly, while the saturation pressure and formation crude oil viscosity remain basically unchanged. The minimum miscible pressure experiment shows that CO2 injection under formation pressure conditions can achieve multiphase miscibility. Based on experimental research results, the BZ13-2 oilfield is suitable for early gas injection development and can significantly improve recovery.

Geologic Characteristics of Volcanic Hydrocarbon Reservoirs and Exploration Directions in China

Volcanic rocks are distributed widely in China, which are important exploration targets. By analyzing many discovered volcanic hydrocarbon reservoirs all over the world, the authors summarized the geologic characteristics of the formation of volcanic hydrocarbon reservoirs in China, and gave further exploration directions and advices. （1） There are mainly Carboniferous-Permian, Jurassic-Cretaceous, Paleogene-Neogene volcanic rocks in oil- and gas-bearing basins in China, which are mainly distributed in the Junggar Basin, Songliao Basin, Bohai Bay Basin, etc. There are mainly intermediate rocks and acidic rocks in east China, and intermediate rocks and basic rocks in west China. They primarily develop in intracontinentai rift settings and island arc environments. （2） Porefissure reservoirs are distributed widely in basins, which are volcanic rocks mainly in explosive and effusive facies. （3） Volcanic hydrocarbon reservoirs are chiefly near-source lithostratigraphic hydrocarbon reservoirs, and the oil and gas accumulation is predominantly controlled by lithotypes, faults and structural positions. （4） Deep-seated oil and gas reservoirs in the Songliao Basin and Carboniferous volcanic hydrocarbon reservoirs in the Junggar Basin are potential giant volcanic gas provinces, the volcanic hydrocarbon reservoirs in the Bohai Bay Basin and Santanghu Basin are favorable for oil and gas reserves increase, and volcanic rocks in the Turpan Basin, Sichuan Basin, Tarim Basin have exploration potentiality. （5） The technology series of oil and gas exploration in volcanic rocks have been preliminarily formed.

Geochemical characteristics and diagenetic systems of dolomite reservoirs of the Changxing Formation in the eastern Sichuan Basin, China

In order to discuss the relationship between dolomite reservoirs and diagenetic systems of the Changxing Formation, we studied carbon, oxygen and strontium stable isotopes, iron, manganese and strontium trace elements and the Mg/Ca （mol%） ratio, dolomite order degree, and determined that burial dolomitization is the key to controlling the distribution of high quality dolomite reservoir in the Changxing Formation in the eastern Sichuan Basin. The dolomite of the Changxing Formation is divided into four diagenetic systems： （1） penecontemporaneous stage syngenetic brine diagenetic system, （2） early diagenetic stage strata seal brine diagenetic system, （3） middle-late diagenetic stage mixed hot brine diagenetic system and （4） tectonic uplift stage mixed hydrothermal fluid diagenetic system. New understanding of the controlling factors and distribution of dolomite reservoir development is discussed. Reef shoal facies belts controlled regional reservoir distribution and the scale of development. Burial dolomitization of a strata seal brine diagenetic system is the foundation of reservoir development, mainly developing pore reservoir. Burial dolomitization of mixed hot brine diagenetic system expanded the reservoir distribution and improved the reservoir quality, mainly developing pore-vug reservoir. Fracturing and dissolution of a mixed hydrothermal fluid diagenetic system is the key to improving the reservoir quality, mainly developing pore-vug-crack complex reservoirs.

Geological characteristics and accumulation mechanisms of the "continuous" tight gas reservoirs of the Xu2 Member in the middle-south transition region,Sichuan Basin,China

＂Continuous＂ tight gas reservoirs are those reservoirs which develop in widespread tight sandstones with a continuous distribution of natural gas. In this paper, we summarize the geological features of the source rocks and ＂＇continuous＂ tight gas reservoirs in the Xujiahe Formation of the middle- south transition region, Sichuan Basin. The source rocks of the Xul Member and reservoir rocks of the Xu2 Member are thick （Xul Member： 40 m, Xu2 Member： 120 m） and are distributed continuously in this study area. The results of drilled wells show that the widespread sandstone reservoirs of the Xu2 Member are charged with natural gas. Therefore, the natural gas reservoirs of the Xu2 Member in the middle-south transition region are ＂continuous＂ tight gas reservoirs. The accumulation of ＂continuous＂ tight gas reservoirs is controlled by an adequate driving force of the pressure differences between source rocks and reservoirs, which is demonstrated by a ＂one-dimensional＂ physical simulation experiment. In this simulation, the natural gas of＂continuous＂ tight gas reservoirs moves tbrward with no preferential petroleum migration pathways （PPMP）, and the natural gas saturation of＂continuous＂ tight gas reservoirs is higher than that of conventional reservoirs.

Pore Characteristics of the Fine-Grained Tight Reservoirs in the Yabulai Basin, Northwestern China

This work investigated the pore structure characteristics and reservoir features of the finegrained tight reservoirs in the lower member of the Xinhe Formation(J2x1) in the Xiaohu subsag,Yabulai Basin based on core samples through various techniques. Interbedded silt/fine sandstones and mudstones are developed in the study area. Scanning electron microscopy(SEM) images were used to delineate different types of pores, including primary intergranular pores, secondary intergranular and intragranular pores, organic pores and fractures. The pore types were distinguished by pore size, pore area, location and formation process. The pore radii of the fine-grained rocks range from 1 nm to 1.55μm, mainly concentrated between 5 and 300 nm by low pressure N2adsorption and MICP analyses. The pore structure parameters of pore throat size and pore throat sorting coefficient are both positively correlated with porosity, while pore throat sorting coefficient has a negative correlation with permeability. The pore structures of the studied samples are much related to the mineral type and content and grain size, followed by TOC content. In these rocks with relatively low TOC and low maturity, the rigid minerals protect pores with pressure shadow from collapse, and dissolution-related pores contribute a lot to inorganic porosity. In contrast, these rocks with abundant TOC contain a large number of organic pores. The permeability of the fine-grained tight reservoir is mainly dominated by larger pore throats, while a large number of small pores(mostly <0.1 μm) contribute considerably to porosity. These results have deepened our understanding of the interbedded fine-grained tight reservoirs and can be applicable to fine-grained reservoirs in a similar setting.

Changing characteristics of ultralow permeability reservoirs during waterflooding operations

The characteristics of ultralow permeability reservoirs changed after waterflooding. Thin- section analysis and scanning electron microscopy （SEM） of core samples from inspection wells indicated that calcite and barite were formed in ultralow permeability reservoirs during waterflooding operations. Some asphaltene precipitates on the surface of formation rock would influence the reservoir porosity, permeability, wettability, and electrical properties. In this paper, the changes of physical, electrical, and fluid properties of ultralow permeability reservoirs during waterflooding operations were analyzed. This provides important information to improve waterflooding performance in ultralow permeability reservoirs.

Oxidization characteristics and thermal miscible flooding of high pressure air injection in light oil reservoirs

Physical modeling,numerical simulation and field case analysis were carried out to find out the subsurface thermal oxidation state,thermal oxidation front characteristics and production dynamic characteristics of high pressure air injection thermal oxidation miscible flooding technology.The lighter the composition and the lower the viscosity of the crude oil,the lower the fuel consumption and the combustion temperature are.The thermal oxidation front of light oil and volatile oil can advance stably,and a medium-temperature thermal oxidation stable displacement state can be formed in the light oil reservoir under high pressure conditions.With strong thermal gasification and distillation,light oil and volatile oil are likely to form a single phase zone of gasification and distillation with thermal flue gas at the high-temperature and high-pressure heat front,finally,an air-injection thermal miscible front.In light oil reservoirs,the development process of high-pressure air-injection thermal miscible flooding can be divided into three stages:boosting pressure stage,low gas-oil ratio and high-efficiency stable production stage and high gas-oil ratio production stage.Approximately 70%of crude oil is produced during the boosting pressure stage and low gas-oil ratio high-efficiency and stable production stage.

Architecture characterization of Ordovician fault-controlled paleokarst carbonate reservoirs in Tuoputai,Tahe oilfield,Tarim Basin,NW China

Based on outcrop,core,logging,seismic and production data,and the formation of fault-controlled karst reservoirs,the types and characterization of Ordovician fault-controlled karst reservoir architectures in the Tuoputai area of the Tahe oilfield are studied.According to the concept of genetic geologic body,the fault-controlled karst reservoir is divided into architecture elements of four levels,the strike-slip fault impact zone is the level-1 architecture element,the fault-controlled karst reservoir the level-2 architecture element,the fracture-cave zone(which can be further subdivided into dissolution cave,dissolution pore and vug,and fracture zones)inside the fault-controlled karst reservoir the level-3 architecture element,and fillings inside caves is the level-4 architecture element(which can be further divided based on the filling degree and lithologic types of the fillings).Specific characterization techniques have been optimized according to the characteristics of various architecture elements.The zone impacted by strike-slip fault is characterized by seismic coherence and artificial interpretation.Under the constraint of zone impacted by strike-slip fault,fault likelihood(FL)property is used to characterize the outline of fault-controlled karst reservoir.Under the constraint of fault-controlled karst reservoir outline,the internal structures are divided based on seismic texture attribute.Finally,the cavern filling pattern is interpreted based on drilling and logging data.The fault-controlled karst reservoirs can be interpreted in 3-dimensional space by architecture element levels,and the characterization technology combining log and seismic data for fault-controlled karst reservoir has been worked out,which has complemented the development theory and technologies for this kind of reservoirs in the Tahe oilfield.

Characteristics and development model of karst reservoirs in the fourth member of Sinian Dengying Formation in central Sichuan Basin,SW China

The reservoir space,types and distribution characteristics of karst carbonate gas reservoirs in the fourth member of Sinian Dengying Formation(Deng 4 Member)in central Sichuan Basin are analyzed based on the drilling,logging and seismic data.A development model of karst reservoirs is constructed to support the high-efficiency development of gas pools.The research shows that the reservoirs in Deng 4 Member have mainly small-scale karst vugs and fractures as storage space,and can be divided into three types,fracture-vug,pore-vug and pore types.The development patterns of the karst reservoirs are determined.On the plane,the karst layers increase from 65 m to 170 m in thickness from the karst platform to the karst slope,and the high-quality reservoirs increase from 25.0 m to 42.2 m in thickness;vertically,the reservoirs at the top of Deng 4 Member appear in multiple layers,and show along-bedding and along fracture dissolution characteristics.The reservoirs at the bottom are characterized by the dissolution parallel to the water level during the karstification period,and have 3-5 large-scale fracture-cave systems.Based on the reservoir development characteristics and the genetic mechanism,three types of reservoir development models of karst reservoir are established,i.e.,bed-dissolved body,fracture-dissolved body and paleohorizon-dissolved body.The construction of karst reservoir development models and seismic response characteristics of the three types of reservoirs can provide parameter for well placement and trajectory design,and substantially improve productivity and development indices of individual wells and gas reservoirs.The designed production capacity of the gas reservoir has enhanced from the initial 3.6 billion to 6 billion cubic meters,making the profit of the reservoir development increase noticeably.

Geochemical Characteristics and Migration Pathways of Ordovician Carbonate Oil Reservoirs in the Tuoputai Area,Tarim Basin,Northwestern China

Exploration potential is huge and the oil resources are rich in the Ordovician reservoirs of the Tarim Basin.However,the mechanism of hydrocarbon accumulation is complex and not yet fully understood.In the Tuoputai area,the hydrocarbon migration pathways and characteristics of deep hydrocarbon accumulation are revealed through analyses of the physical data of rich oil and gas,the geochemical parameters of oil,and fluid inclusions.The results show that the Ordovician oils in the Tuoputai area have the same geochemical characteristics as the mixed oil from the Lower Cambrian source rock and the Middle–Upper Ordovician source rock.The Ordovician reservoirs have been charged three times:in the late Caledonian,late Hercynian,and Himalayan stages.Oil charging occurred in the Hercynian stage,in particular,as it is the main filling period of hydrocarbon.The north-northeast(NNE)-trending TP12 CX major fault,active in in these times and is dominant migration channel of hydrocarbon,but there is segmentation affected by the difference of activities.Oil maturity is higher in the south than in the north and is abnormally high near the major fault.Parameters related to migration indicate that oil migrated northeastward along the NNE-trending TP12 CX major fault and adjusted laterally along the secondary faults and weathering crust,forming the present characteristics of oil and gas distribution.

Theoretical exploration of water injection gravity flooding oil in ultra-deep fault-controlled fractured-cavity carbonate reservoirs

Based on the analysis of geological characteristics of ultra-deep fault-controlled fracture-cavity carbonate reservoirs and division of reservoir units, two physical models were made, and physical simulations of oil displacement by water injection were carried out to find out water flooding mechanism in the fault-controlled fracture-cavity carbonate reservoir under complex flow state. On this basis, a mathematical model of fault-controlled carbonate reservoir with coexisting seepage and free flow has been established. Pilot water injection tests have been carried out to evaluate the effects of enhancing oil recovery by water injection. The results show that: fault-controlled fracture-cavity carbonate reservoir units can be divided into three types:the strong natural energy connected type, the weak natural energy connected type and the weak natural energy isolated type;the fault-fracture activity index of the fault-controlled fractured-cavity body can effectively characterize the connectivity of the reservoir and predict the effective direction of water injection;the mathematical model of fault-controlled carbonate reservoir with coexisting seepage and free flows can quantitatively describe the fluid flow law in the fracture-cavity body;the water injected into the fault-controlled fracture-cavity body is weakly affected by the capillary force of the lithologic body, and the oil-water movement is mainly dominated by gravity. The development modes of single well water injection, unit water injection,and single well high pressure water injection proposed based on the connection structure of fracture-cavity space and well storage space configuration are confirmed effective by pilot tests, with obvious water injection gravity flooding effect.

Characteristics of parametamorphic rock reservoirs in Pingxi area, Qaidam Basin, NW China

Based on core, thin-section, scanning electron microscopy(SEM) and well logging data, the characteristics of the parametamorphic rock reservoirs in the Pingxi area were analyzed by means of whole rock X-ray diffraction and micron CT scanning. The parametamorphic rock reservoirs mainly had three types of rocks: slate, crystalline limestone and calc-schist; the original rocks were Ordovician-Silurian marine clastic and carbonate rocks. The three types of parametamorphic rock reservoirs developed three types and six sub-types of reservoir space. The first type of reservoir space was fractures, including structural, weathered and dissolution fractures; the second type was dissolved porosities, including dissolved pores and caves; the third type was nano-sized intercrystalline porosities. The three types of parametamorphic rock reservoirs were different widely in the quantity, volume and radius of pore-throats, and were strongly affected by the type and development degree of fractures. The parametamorphic rock reservoirs were formed by metamorphism, weathering, structural fragmentation and dissolution. Metamorphism reformed the parametamorphic rock reservoirs significantly, breaking the traditional constraint of finding weathering crust at top. The parametamorphic rock reservoirs experienced five formation stages, and their distribution was controlled by rock type, metamorphic degree, ancient geomorphology, and weathering intensity.