Artificial vegetation restoration is the main measure for vegetation restoration and soil and water conservation in alpine mine dumps on the Qinghai-Tibet Plateau,China.However,there are few reports on the dynamic cha...Artificial vegetation restoration is the main measure for vegetation restoration and soil and water conservation in alpine mine dumps on the Qinghai-Tibet Plateau,China.However,there are few reports on the dynamic changes and the influencing factors of the soil reinforcement effect of plant species after artificial vegetation restoration under different recovery periods.We selected dump areas of the Delni Copper Mine in Qinghai Province,China to study the relationship between the shear strength and the peak displacement of the root-soil composite on the slope during the recovery period,and the influence of the root traits and soil physical properties on the shear resistance characteristics of the root-soil composite via in situ direct shear tests.The results indicate that the shear strength and peak displacement of the rooted soil initially decreased and then increased with the increase of the recovery period.The shear strength of the rooted soil and the recovery period exhibited a quadratic function relationship.There is no significant function relationship between the peak displacement and the recovery period.Significant positive correlations(P<0.05)exists between the shear strength of the root-soil composite and the root biomass density,root volume density,and root area ratio,and they show significant linear correlations(P<0.05).There are no significant correlations(P>0.05)between the shear strength of the root-soil composite and the root length density,and the root volume ratio of the coarse roots to the fine roots.A significant negative linear correlation(P<0.05)exists between the peak displacement of the rooted soil and the coarse-grain content,but no significant correlations(P>0.05)with the root traits,other soil physical property indices(the moisture content and dry density of the soil),and slope gradient.The coarse-grain content is the main factor controlling the peak displacement of the rooted soil.展开更多
Rational determination and reduction of local energy loss of oil flow at pipe junctions are of important significance to improve hydraulic pipeline's work efficiency, especially for complex hydraulic pipeline connect...Rational determination and reduction of local energy loss of oil flow at pipe junctions are of important significance to improve hydraulic pipeline's work efficiency, especially for complex hydraulic pipeline connected by isodiametric T-type ducts with sharp comers to get combined and divided flow. From this point of view, the formulae of resistance loss for combined flow and divided flow through isodiametric T-type duct with sharp comers as well as the correlations of resistance loss coefficients in the branches of the duct are derived using energy method. On this basis, resistance characteristics of hydraulic oil in the duct are obtained by numerical simulation of different flow modes, which are commonly applied in hydraulic pipelines, using computational fluid dynamics (CFD) method, and the reasons for the resistance loss are analyzed based on the pressure change mechanism in the flow field. A part of simulation results was validated with the reference data. The research shows that for combined flows the resistance loss of symmetrical is lower than that of unsymmetrical to obtain low speed in common branch, but to gain high speed is quite the contrary, for divided flows, the symmetrical is always a reasonable choice to reduce resistance loss. These conclusions can be applied to optimize the design of hydraulic pipeline.展开更多
The equivalent simplification of large wind farms is essential for evaluating the safety of power systems.However,sub-synchronous oscillations can significantly affect the stability of power systems.Although detailed ...The equivalent simplification of large wind farms is essential for evaluating the safety of power systems.However,sub-synchronous oscillations can significantly affect the stability of power systems.Although detailed mathematical models of wind farms can help accurately analyze the oscillation mechanism,the solution process is complicated and may lead to problems such as the“dimensional disaster.”Therefore,this paper proposes a sub-synchronous frequency domain-equivalent modeling method for wind farms based on the nature of the equivalent resistance of the rotor,in order to analyze sub-synchronous oscillations accurately.To this end,Matlab/Simulink is used to simulate a detailed model,a single-unit model,and an equivalent model,considering a wind farm as an example.A simulation analysis is then performed under the sub-synchronous frequency to prove that the model is effective and that the wind farm equivalence model method is valid.展开更多
Triggering scheme is a significant factor that may influence the process of vacuum arc initiation. In this work, the characteristics of resistance triggering of a pulsed vacuum arc ion source are investigated and comp...Triggering scheme is a significant factor that may influence the process of vacuum arc initiation. In this work, the characteristics of resistance triggering of a pulsed vacuum arc ion source are investigated and compared with the independent pulse generator triggering. The results show that although the resistance triggering method is capable of triggering a vacuum arc ion source by properly choosing the resistance and electric parameters, it inevitably increases the rise time of the arc current. A high speed multiframe camera is used to reveal the transition process o~ arc initiation during one shot. From the images it is conjectured that the lower voltage between the cathode and the anode may be the reason that leads to the lower transition speed of discharge at the moment of arc initiation.展开更多
The resistance characteristics of a continuously-graded distributed Bragg reflector(DBR) in a 980-nm verticalcavity surface-emitting laser(VCSEL) are modeled in detail.The junction resistances between the layers o...The resistance characteristics of a continuously-graded distributed Bragg reflector(DBR) in a 980-nm verticalcavity surface-emitting laser(VCSEL) are modeled in detail.The junction resistances between the layers of both the p-and n-DBR mirrors are analysed by combining the thermionic emission model and the finite difference method.In the meantime,the intrinsic resistance of the DBR material system is calculated to make a comparison with the junction resistance.The minimal values of series resistances of the graded p-and n-type DBR mirrors and the lateral temperature-dependent resistance variation are calculated and discussed.The result indicates the potential to optimize the design of the DBR reflectors of the 980-nm VCSELs.展开更多
Considering the special resistance characteristics of fluids flowing through ducts with small gaps, experiments are performed to investigate the resistance characteristics of single-phase water, which is forced to flo...Considering the special resistance characteristics of fluids flowing through ducts with small gaps, experiments are performed to investigate the resistance characteristics of single-phase water, which is forced to flow through ver tical annuli. The gap sizes are 0.9, 1.4 and 2.4mm, respectively. The experiments are conducted under condition of 1atm. The water in the annuli is heated by high temperature water reversely flowing through the inner tube and the outer annulus. The results show that the flow pattern begin to change from laminar to turbulent before Reynolds number approaches 2000, the flow resistance in annulus has little relations with the temperature difference and ways of being heated, but mainly depends on the ratio of mass flux to the width of annulus.展开更多
When the amphibious vehicle navigates in water,the angle of the anti-wave plate and the position of the center of gravity greatly influence the navigation characteristics.In the relevant research on reducing the navig...When the amphibious vehicle navigates in water,the angle of the anti-wave plate and the position of the center of gravity greatly influence the navigation characteristics.In the relevant research on reducing the navigation resistance of amphibious vehicles by adjusting the angle of the anti-wave plate,there is a lack of scientific selection of parameters and reasonable research of simulation results by using mathematical methods,and the influence of the center of gravity position on navigation characteristics is not considered at the same time.To study the influence of the combinations of the angle of the anti-wave plate and the position of the center of gravity on the resistance reduction characteristics,a numerical calculation model of the amphibious unmanned vehicle was established by using the theory of computational fluid dynamics,and the experimental data verified the correctness of the numerical model.Based on this numerical model,the navigation characteristics of the amphibious unmanned vehicle were studied when the center of gravity was located at different positions,and the orthogonal experimental design method was used to optimize the parameters of the angle of the anti-wave plate and the position of the center of gravity.The results show that through the parameter optimization analysis based on the orthogonal experimental method,the combination of the optimal angle of the anti-wave plate and the position of the center of gravity is obtained.And the numerical simulation result of resistance is consistent with the predicted optimal solution.Compared with the maximum navigational resistance,the parameter optimization reduces the navigational resistance of the amphibious unmanned vehicle by 24%.展开更多
With the development of aero-engines, the turbine inlet temperature continues to rise. In order to ensure the safety and reliability of the turbine blades, cooling structures must be set inside turbine blades to cool ...With the development of aero-engines, the turbine inlet temperature continues to rise. In order to ensure the safety and reliability of the turbine blades, cooling structures must be set inside turbine blades to cool them. Heat transfer coefficient and flow resistance are the key parameters to measure the cooling characteristics of internal cooling structures. In this paper, the characteristics of flow resistance in a rotating ribbed channel is presented numerical simulation under different rib spacings, rib angles, and thermal boundary conditions. The results show that, separation and reattachment of fluid between ribs is the key effect of rib spacing on flow resistance. The flow resistance is small when the rib spacing is small, because it's difficult for the fluid to form reattachment between the ribs. With the increase of rib spacing, the reattachment phenomenon is more obvious and the flow resistance increases accordingly. In general,p: e=10 channel has the maximum flow resistance. Secondary flow caused by the ribs is the key factor affecting the flow resistance characteristics with different rib angles. The secondary flow interacts with the main flow and causes flow loss through mixing, thus affecting the flow resistance of the channel. Under static condition, the flow resistance of 60°ribbed channel is the largest. The flow resistance of channel was affected by the temperature rise ratio also. And with the increase of the Ro, the temperature rise ratio has a more obvious effect on the flow resistance of the ribbed channel.When Ro=0.45, the flow resistance of the channel with a temperature rise ratio of 0.4 is 2.4 times that of the channel without temperature rise, while when Ro=0.3, it is 1.6 times, and when Ro=0.15, it is 1.2 times.展开更多
To investigate the effect of temperature on the resistance characteristics of dce varieties with different resistance genes to brown planthopper (BPH), Nilaparvata lugens (Stal), the resistances of IR26 (Bphl) a...To investigate the effect of temperature on the resistance characteristics of dce varieties with different resistance genes to brown planthopper (BPH), Nilaparvata lugens (Stal), the resistances of IR26 (Bphl) and IR36 (bph2) to BPH population in Hangzhou, China were monitored in greenhouse during September in 2007 and 2008 by using the standard seedling screening techniques (SSST) developed by the International Rice Research Institute (IRRI). Furthermore, the changes in resistance of IR26 and IR36 to BPH, soluble sugar and oxalic acid contents in 25-day-old rice plants of susceptible variety TN1 and resistant varieties IR26 and IR36 were detected at five temperatures (22℃, 25℃, 28℃, 31℃ and 34℃). IR26 completely lost resistance both in greenhouse and at the five tested temperatures. IR36 still had moderate resistance at natural temperature, but its resistance decreased gradually when the temperature increased from 25℃ to 34℃, and fully lost its resistance at 31℃ and 34℃. The highest durable resistance of IR26 and IR36 were recorded at 25℃. The soluble sugar content in plants of the three tested rice varieties increased with temperature increase, and the oxalic acid content increased with the temperature increase at first, maximized at 25℃, and then declined. Two-way ANOVA indicated significant effects of temperature and rice variety on contents of soluble sugar and oxalic acid in rice plants展开更多
Computational fluid dynamics(CFD)was used in conjunction with BP neural network to study theflow resistance characteristic of the combination-channel inside hydraulic manifold block(HMB).The in-put parameters of the c...Computational fluid dynamics(CFD)was used in conjunction with BP neural network to study theflow resistance characteristic of the combination-channel inside hydraulic manifold block(HMB).The in-put parameters of the combination-channel model were confirmed to have effect on the pressure-drop bythe numerical method,and a BP neural network model was accordingly constructed to predict the channelpressure-drops.The flow resistance characteristic curves of various channels were achieved,and a perfor-mance parameter was given to evaluate the through-flow characteristic of the channel according to thecurves.The predictions are' in agreement with the numerical computation,indicating that the method canbe utilized to accurately determine the flow characteristic of the combination channel with high efficiency.展开更多
Semen coicis resistant starch is a type of starch which has undergone retrogradation. In this study,the structural characteristics of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Seme...Semen coicis resistant starch is a type of starch which has undergone retrogradation. In this study,the structural characteristics of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch were investigated. The field emission scanning electron microscopy results indicated that compared to Semen coicis native starch and high-amylose maize starch,the surface of heat-moisture treated Semen coicis resistant starch was rough and full of irregular layered strips. The Fourier transform infrared spectroscopy measurements indicated the degree of ordered structure values of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch are 1.355,1.372,and 1.410,respectively,and the degree of double helix values is 1.931,1.942,and 2.027,respectively,indicating that the degree of ordered structure and double helix structure of heat-moisture treated Semen coicis resistant starch is both higher than those of Semen coicis native starch and high-amylose maize starch. ^(13) C nuclear magnetic resonance spectroscopy showed that Semen coicis native starch and high-amylose maize starch exhibited A-type crystal structures,while heat-moisture treated Semen coicis resistant starch displayed B-type crystal structures. The relative crystallinity of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch is 76.41,85.36,and 87.25,respectively,and the percentages of amorphous region are 5.78,4.72,and 4.39,respectively. Additionally,heat-moisture treated Semen coicis resistant starch could increase the proliferation of Bifidobacterium bifidum more than Semen coicis native starch or high-amylose maize starch. Bifidobacterium bifidum displayed a higher tolerance under simulated gastrointestinal tract conditions such as low p H,bile acid,pepsin,and trypsin in heat-moisture treated Semen coicis resistant starch medium than in Semen coicis native starch or high-amylose maize starch media.展开更多
Effect of working temperature on the resistance characteristic including the permeability coefficient and the pressure drop evolution of a pleated stainless steel woven filter with a nominal pore size of 0.5 μm has b...Effect of working temperature on the resistance characteristic including the permeability coefficient and the pressure drop evolution of a pleated stainless steel woven filter with a nominal pore size of 0.5 μm has been studied. The permeability coefficient was obtained based on the pressure drop data and the Darcy's law. In three filtration experiments, pure carbon dioxide at 283 K, nitrogen at 85 K and liquid helium at 18 K are adopted, respectively. It is found that the permeability coefficient decreases at the working temperature due to the cold shrink of the filter element at cryogenic temperature. Then, two kinds of feed slurries, mixture of liquid nitrogen and solid carbon dioxide at 85 K, and mixture of liquid helium and solid nitrogen at 18 K, flow into the filter cell. The solid particles are deposited on the filter surface to form a filter cake and the purified liquid flows through the filter. It is found that the pressure drop evolution shows the same trend on these two temperatures, which can be divided into three stages with high filtration efficiency, indicating the feasibility of the filter for cryogenic application. However, variant cake resistances are obtained, which is resulted from the different interactions between solid particles in the feed slurry at lower working temperature.展开更多
Isolates of X.oryzae pv.oryzae(X.o.o.)re-sistant to Saikuzuo[N,N-methylene-di(2-amino-5-sulfurhydrogen-1,3,4-thioazole)]were selected from laboratory and field for thestudy of their characteristics.The laboratoryresis...Isolates of X.oryzae pv.oryzae(X.o.o.)re-sistant to Saikuzuo[N,N-methylene-di(2-amino-5-sulfurhydrogen-1,3,4-thioazole)]were selected from laboratory and field for thestudy of their characteristics.The laboratoryresistant mutants had no pathogenicity on rice,and the field resistant isolates did not show re-sistance to Saikuzuo in vitro.These strainsshowed cross resistance to homologue bacteri-cide Dikuzuo(TH-128),but seems no resis-展开更多
Cu/HfOx/n^+Si devices are fabricated to investigate the influence of technological parameters including film thickness and Ar/02 ratio on the resistive switching (RS) characteristics of HfOx films, in terms of swit...Cu/HfOx/n^+Si devices are fabricated to investigate the influence of technological parameters including film thickness and Ar/02 ratio on the resistive switching (RS) characteristics of HfOx films, in terms of switch ratio, endurance properties, retention time and multilevel storage. It is revealed that the RS characteristics show strong dependence on technological parameters mainly by altering the defects (oxygen vacancies) in the film. The sample with thickness of 2Onto and Ar/O2 ratio of 12:3 exhibits the best RS behavior with the potential of multilevel storage. The conduction mechanism of all the films is interpreted based on the filamentary model.展开更多
Resistive switching(RS)devices have great application prospects in the emerging memory field and neuromorphic field,but their stability and unclear RS mechanism limit their relevant applications.In this work,we constr...Resistive switching(RS)devices have great application prospects in the emerging memory field and neuromorphic field,but their stability and unclear RS mechanism limit their relevant applications.In this work,we construct a hydrogenated Au/SnO_(2)nanowire(NW)/Au device with two back-to-back Schottky diodes and investigate the RS characteristics in air and vacuum.We find that the Ion/Io ff ratio increases from 20 to 10^(4)when the read voltage decreases from 3.1 V to^(-1)V under the condition of electric field.Moreover,the rectification ratio can reach as high as 10^4owing to oxygen ion migration modulated by the electric field.The nanodevice also shows non-volatile resistive memory characteristic.The RS mechanism is clarified based on the changes of the Schottky barrier width and height at the interface of Au/SnO_(2)NW/Au device.Our results provide a strategy for designing high-performance memristive devices based on SnO_(2)NWs.展开更多
Located in Lu-Zong ore concentration area, middle-lower Yangtze metallogenic belt, ShaXi porphyry copper deposit is a typical hydrothermal deposit. To investigate the distribution of deep ore bodies and spatial charac...Located in Lu-Zong ore concentration area, middle-lower Yangtze metallogenic belt, ShaXi porphyry copper deposit is a typical hydrothermal deposit. To investigate the distribution of deep ore bodies and spatial characteristics of host structures, an AMT survey was conducted in mining area. Eighteen pseudo-2D resistivity sections were constructed through careful processing and inversion. These sections clearly show resistivity difference between the Silurian sandstones formation and quartz diorite porphyry and this porphyry copper formation was controlled by the highly resistive anticlines. Using 3D block Kxiging interpolation method and 3D visualization techniques, we constructed a detailed 3D resistivity model of quartz diorite porphyry which shows the shape and spatial distribution of deep ore bodies. This case study can serve as a good example for future ore prospecting in and around this mining area.展开更多
The flow resistance factors of non-submerged rigid vegetation in open channels were analyzed. The formulas of drag coefficient CD and equivalent Manning's roughness coefficient na were derived by analyzing the force ...The flow resistance factors of non-submerged rigid vegetation in open channels were analyzed. The formulas of drag coefficient CD and equivalent Manning's roughness coefficient na were derived by analyzing the force of the flow of non-submerged rigid vegetation in open channel. The flow characteristics and mechanism of non-submerged rigid vegetation in open channel were studied through flume experiments.展开更多
Experimental investigation of stepped and straight-through labyrinth seals was designed to study the sealing performance of two different typical labyrinth seals.In order to facilitate dimensional analysis on the flow...Experimental investigation of stepped and straight-through labyrinth seals was designed to study the sealing performance of two different typical labyrinth seals.In order to facilitate dimensional analysis on the flow resistance characteristics of labyrinth seals,the variable cross-section of the flow channels are considered as constant cross-section flow.The mechanical energy loss of flow caused by throttle turbulence intensity is considered as caused by friction along the way.The friction coefficient of stepped labyrinth seals is bigger than that of straight-through labyrinth seals by more than 40% for the same Reynolds number and the ratio of equivalent diameter and the seal length.The expression of friction coefficient /and /Re are obtained from experimental data.The verifications indicate that the expressions are highly accurate.The contribution to the total pressure drop of each tooth cavity gradually becomes less along the flow direction.展开更多
In this paper,the subdomain analysis model of the eddy current brake(ECB)is established.By comparing with the finite element method,the accuracies of the subdomain model and the finite element model are verified.Furth...In this paper,the subdomain analysis model of the eddy current brake(ECB)is established.By comparing with the finite element method,the accuracies of the subdomain model and the finite element model are verified.Furthermore,the resistance characteristics of radial,axial,andHalbach arrays under impact load are calculated and compared.The axial array has a large braking force coefficient but low critical velocity.The radial array has a low braking force coefficient but high critical velocity.The Halbach array has the advantages of the first two arrays.Not only the braking force coefficient is large,but also the critical speed is high.The parameter analysis of the Halbach array is further carried out.The inner tube thickness and air gap length are the sensitive factors of resistance characteristics.The demagnetization effect is significantly enhanced by the increase of the inner tube thickness.In order to ensure that the ECB does not overheat,the electromagnetic-thermal coupling model is established based on the heat transfer theory.The temperature rise of the inner tube is obvious while that of the permanentmagnet is small.The temperature rise of the inner tube is more than 20 K each time,and that of the permanent magnet is less than 1 K each time.展开更多
The novel BaTiO3/BiFeO3/TiO2 multilayer heterojunction is prepared on a fluorine-doped tinoxide(FTO) substrate by the sol–gel method. The results indicate that the Pt/Ba TiO3/BiFeO3/TiO2/FTO heterojunction exhibits s...The novel BaTiO3/BiFeO3/TiO2 multilayer heterojunction is prepared on a fluorine-doped tinoxide(FTO) substrate by the sol–gel method. The results indicate that the Pt/Ba TiO3/BiFeO3/TiO2/FTO heterojunction exhibits stable bipolar resistive switching characteristic, good retention performance, and reversal characteristic. Under different pulse voltages and light fields, four stable resistance states can also be realized. The analysis shows that the main conduction mechanism of the resistive switching characteristic of the heterojunction is space charge limited current(SCLC) effect. After the comprehensive analysis of the band diagram and the P–E ferroelectric property of the multilayer heterojunction, we can deduce that the SCLC is formed by the effect of the oxygen vacancy which is controlled by ferroelectric polarizationmodulated change of interfacial barrier. And the effective photo-generated carrier also plays a regulatory role in resistance state(RS), which is formed by the double ferroelectric layer Ba TiO3/BiFeO3 under different light fields. This research is of potential application values for developing the multi-state non-volatile resistance random access memory(RRAM) devices based on ferroelectric materials.展开更多
基金supported by the Project of Qinghai Science&Technology Department(Grant No.2021-ZJ-956Q).
文摘Artificial vegetation restoration is the main measure for vegetation restoration and soil and water conservation in alpine mine dumps on the Qinghai-Tibet Plateau,China.However,there are few reports on the dynamic changes and the influencing factors of the soil reinforcement effect of plant species after artificial vegetation restoration under different recovery periods.We selected dump areas of the Delni Copper Mine in Qinghai Province,China to study the relationship between the shear strength and the peak displacement of the root-soil composite on the slope during the recovery period,and the influence of the root traits and soil physical properties on the shear resistance characteristics of the root-soil composite via in situ direct shear tests.The results indicate that the shear strength and peak displacement of the rooted soil initially decreased and then increased with the increase of the recovery period.The shear strength of the rooted soil and the recovery period exhibited a quadratic function relationship.There is no significant function relationship between the peak displacement and the recovery period.Significant positive correlations(P<0.05)exists between the shear strength of the root-soil composite and the root biomass density,root volume density,and root area ratio,and they show significant linear correlations(P<0.05).There are no significant correlations(P>0.05)between the shear strength of the root-soil composite and the root length density,and the root volume ratio of the coarse roots to the fine roots.A significant negative linear correlation(P<0.05)exists between the peak displacement of the rooted soil and the coarse-grain content,but no significant correlations(P>0.05)with the root traits,other soil physical property indices(the moisture content and dry density of the soil),and slope gradient.The coarse-grain content is the main factor controlling the peak displacement of the rooted soil.
基金supported by Hebei Provincial Natural Science Foundation of China (Grant No. 503292)
文摘Rational determination and reduction of local energy loss of oil flow at pipe junctions are of important significance to improve hydraulic pipeline's work efficiency, especially for complex hydraulic pipeline connected by isodiametric T-type ducts with sharp comers to get combined and divided flow. From this point of view, the formulae of resistance loss for combined flow and divided flow through isodiametric T-type duct with sharp comers as well as the correlations of resistance loss coefficients in the branches of the duct are derived using energy method. On this basis, resistance characteristics of hydraulic oil in the duct are obtained by numerical simulation of different flow modes, which are commonly applied in hydraulic pipelines, using computational fluid dynamics (CFD) method, and the reasons for the resistance loss are analyzed based on the pressure change mechanism in the flow field. A part of simulation results was validated with the reference data. The research shows that for combined flows the resistance loss of symmetrical is lower than that of unsymmetrical to obtain low speed in common branch, but to gain high speed is quite the contrary, for divided flows, the symmetrical is always a reasonable choice to reduce resistance loss. These conclusions can be applied to optimize the design of hydraulic pipeline.
基金supported by the National Key R&D Program of China“Response-driven intelligent enhanced analysis and control for bulk power system stability”(No.2021YFB2400800)。
文摘The equivalent simplification of large wind farms is essential for evaluating the safety of power systems.However,sub-synchronous oscillations can significantly affect the stability of power systems.Although detailed mathematical models of wind farms can help accurately analyze the oscillation mechanism,the solution process is complicated and may lead to problems such as the“dimensional disaster.”Therefore,this paper proposes a sub-synchronous frequency domain-equivalent modeling method for wind farms based on the nature of the equivalent resistance of the rotor,in order to analyze sub-synchronous oscillations accurately.To this end,Matlab/Simulink is used to simulate a detailed model,a single-unit model,and an equivalent model,considering a wind farm as an example.A simulation analysis is then performed under the sub-synchronous frequency to prove that the model is effective and that the wind farm equivalence model method is valid.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11105130 and 11475156
文摘Triggering scheme is a significant factor that may influence the process of vacuum arc initiation. In this work, the characteristics of resistance triggering of a pulsed vacuum arc ion source are investigated and compared with the independent pulse generator triggering. The results show that although the resistance triggering method is capable of triggering a vacuum arc ion source by properly choosing the resistance and electric parameters, it inevitably increases the rise time of the arc current. A high speed multiframe camera is used to reveal the transition process o~ arc initiation during one shot. From the images it is conjectured that the lower voltage between the cathode and the anode may be the reason that leads to the lower transition speed of discharge at the moment of arc initiation.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10974012)
文摘The resistance characteristics of a continuously-graded distributed Bragg reflector(DBR) in a 980-nm verticalcavity surface-emitting laser(VCSEL) are modeled in detail.The junction resistances between the layers of both the p-and n-DBR mirrors are analysed by combining the thermionic emission model and the finite difference method.In the meantime,the intrinsic resistance of the DBR material system is calculated to make a comparison with the junction resistance.The minimal values of series resistances of the graded p-and n-type DBR mirrors and the lateral temperature-dependent resistance variation are calculated and discussed.The result indicates the potential to optimize the design of the DBR reflectors of the 980-nm VCSELs.
文摘Considering the special resistance characteristics of fluids flowing through ducts with small gaps, experiments are performed to investigate the resistance characteristics of single-phase water, which is forced to flow through ver tical annuli. The gap sizes are 0.9, 1.4 and 2.4mm, respectively. The experiments are conducted under condition of 1atm. The water in the annuli is heated by high temperature water reversely flowing through the inner tube and the outer annulus. The results show that the flow pattern begin to change from laminar to turbulent before Reynolds number approaches 2000, the flow resistance in annulus has little relations with the temperature difference and ways of being heated, but mainly depends on the ratio of mass flux to the width of annulus.
基金supported by the National Natural Science Foundation of China(52174154).
文摘When the amphibious vehicle navigates in water,the angle of the anti-wave plate and the position of the center of gravity greatly influence the navigation characteristics.In the relevant research on reducing the navigation resistance of amphibious vehicles by adjusting the angle of the anti-wave plate,there is a lack of scientific selection of parameters and reasonable research of simulation results by using mathematical methods,and the influence of the center of gravity position on navigation characteristics is not considered at the same time.To study the influence of the combinations of the angle of the anti-wave plate and the position of the center of gravity on the resistance reduction characteristics,a numerical calculation model of the amphibious unmanned vehicle was established by using the theory of computational fluid dynamics,and the experimental data verified the correctness of the numerical model.Based on this numerical model,the navigation characteristics of the amphibious unmanned vehicle were studied when the center of gravity was located at different positions,and the orthogonal experimental design method was used to optimize the parameters of the angle of the anti-wave plate and the position of the center of gravity.The results show that through the parameter optimization analysis based on the orthogonal experimental method,the combination of the optimal angle of the anti-wave plate and the position of the center of gravity is obtained.And the numerical simulation result of resistance is consistent with the predicted optimal solution.Compared with the maximum navigational resistance,the parameter optimization reduces the navigational resistance of the amphibious unmanned vehicle by 24%.
基金Beijing Nova Program (No. 20220484129)National Natural Science Foundation of China (No.52376042)+1 种基金Advanced Aerodynamic Innovation Workstation (Grant No. HKCX2022-01-07)National Science and Technology Major Project (Grant No. J2019-II-0022-0043)。
文摘With the development of aero-engines, the turbine inlet temperature continues to rise. In order to ensure the safety and reliability of the turbine blades, cooling structures must be set inside turbine blades to cool them. Heat transfer coefficient and flow resistance are the key parameters to measure the cooling characteristics of internal cooling structures. In this paper, the characteristics of flow resistance in a rotating ribbed channel is presented numerical simulation under different rib spacings, rib angles, and thermal boundary conditions. The results show that, separation and reattachment of fluid between ribs is the key effect of rib spacing on flow resistance. The flow resistance is small when the rib spacing is small, because it's difficult for the fluid to form reattachment between the ribs. With the increase of rib spacing, the reattachment phenomenon is more obvious and the flow resistance increases accordingly. In general,p: e=10 channel has the maximum flow resistance. Secondary flow caused by the ribs is the key factor affecting the flow resistance characteristics with different rib angles. The secondary flow interacts with the main flow and causes flow loss through mixing, thus affecting the flow resistance of the channel. Under static condition, the flow resistance of 60°ribbed channel is the largest. The flow resistance of channel was affected by the temperature rise ratio also. And with the increase of the Ro, the temperature rise ratio has a more obvious effect on the flow resistance of the ribbed channel.When Ro=0.45, the flow resistance of the channel with a temperature rise ratio of 0.4 is 2.4 times that of the channel without temperature rise, while when Ro=0.3, it is 1.6 times, and when Ro=0.15, it is 1.2 times.
基金supported by the National Basic Research Program of China Grant No.2010CB126202the AgroIndustry R&D Special Fund of China Grant No.200803003the Zhejiang Provincial Natural Science Foundation of ChinaGrant No.Z3080437
文摘To investigate the effect of temperature on the resistance characteristics of dce varieties with different resistance genes to brown planthopper (BPH), Nilaparvata lugens (Stal), the resistances of IR26 (Bphl) and IR36 (bph2) to BPH population in Hangzhou, China were monitored in greenhouse during September in 2007 and 2008 by using the standard seedling screening techniques (SSST) developed by the International Rice Research Institute (IRRI). Furthermore, the changes in resistance of IR26 and IR36 to BPH, soluble sugar and oxalic acid contents in 25-day-old rice plants of susceptible variety TN1 and resistant varieties IR26 and IR36 were detected at five temperatures (22℃, 25℃, 28℃, 31℃ and 34℃). IR26 completely lost resistance both in greenhouse and at the five tested temperatures. IR36 still had moderate resistance at natural temperature, but its resistance decreased gradually when the temperature increased from 25℃ to 34℃, and fully lost its resistance at 31℃ and 34℃. The highest durable resistance of IR26 and IR36 were recorded at 25℃. The soluble sugar content in plants of the three tested rice varieties increased with temperature increase, and the oxalic acid content increased with the temperature increase at first, maximized at 25℃, and then declined. Two-way ANOVA indicated significant effects of temperature and rice variety on contents of soluble sugar and oxalic acid in rice plants
基金the National Natural Science Foundation of China(No.50375023)
文摘Computational fluid dynamics(CFD)was used in conjunction with BP neural network to study theflow resistance characteristic of the combination-channel inside hydraulic manifold block(HMB).The in-put parameters of the combination-channel model were confirmed to have effect on the pressure-drop bythe numerical method,and a BP neural network model was accordingly constructed to predict the channelpressure-drops.The flow resistance characteristic curves of various channels were achieved,and a perfor-mance parameter was given to evaluate the through-flow characteristic of the channel according to thecurves.The predictions are' in agreement with the numerical computation,indicating that the method canbe utilized to accurately determine the flow characteristic of the combination channel with high efficiency.
基金Supported by the National Natural Science Fund of China(No.31301441)the Cooperation in Production,Study and Research of Science and Technology Major Projects of Fujian Province(2012N5004)+2 种基金the Natural Science Foundation of Fujian Province(2012J01081)the Scientific and Technological Innovation Team Support Plan of Institution of Higher Learning in Fujian Province([2012]03)the Scientific and Technological Innovation Team Support Plan of Fujian Agriculture and Forestry University(cxtd12009)
文摘Semen coicis resistant starch is a type of starch which has undergone retrogradation. In this study,the structural characteristics of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch were investigated. The field emission scanning electron microscopy results indicated that compared to Semen coicis native starch and high-amylose maize starch,the surface of heat-moisture treated Semen coicis resistant starch was rough and full of irregular layered strips. The Fourier transform infrared spectroscopy measurements indicated the degree of ordered structure values of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch are 1.355,1.372,and 1.410,respectively,and the degree of double helix values is 1.931,1.942,and 2.027,respectively,indicating that the degree of ordered structure and double helix structure of heat-moisture treated Semen coicis resistant starch is both higher than those of Semen coicis native starch and high-amylose maize starch. ^(13) C nuclear magnetic resonance spectroscopy showed that Semen coicis native starch and high-amylose maize starch exhibited A-type crystal structures,while heat-moisture treated Semen coicis resistant starch displayed B-type crystal structures. The relative crystallinity of Semen coicis native starch,high-amylose maize starch,and heat-moisture treated Semen coicis resistant starch is 76.41,85.36,and 87.25,respectively,and the percentages of amorphous region are 5.78,4.72,and 4.39,respectively. Additionally,heat-moisture treated Semen coicis resistant starch could increase the proliferation of Bifidobacterium bifidum more than Semen coicis native starch or high-amylose maize starch. Bifidobacterium bifidum displayed a higher tolerance under simulated gastrointestinal tract conditions such as low p H,bile acid,pepsin,and trypsin in heat-moisture treated Semen coicis resistant starch medium than in Semen coicis native starch or high-amylose maize starch media.
基金Supported by the Shanghai Committee of Science and Technology,China (03 DZ14014)
文摘Effect of working temperature on the resistance characteristic including the permeability coefficient and the pressure drop evolution of a pleated stainless steel woven filter with a nominal pore size of 0.5 μm has been studied. The permeability coefficient was obtained based on the pressure drop data and the Darcy's law. In three filtration experiments, pure carbon dioxide at 283 K, nitrogen at 85 K and liquid helium at 18 K are adopted, respectively. It is found that the permeability coefficient decreases at the working temperature due to the cold shrink of the filter element at cryogenic temperature. Then, two kinds of feed slurries, mixture of liquid nitrogen and solid carbon dioxide at 85 K, and mixture of liquid helium and solid nitrogen at 18 K, flow into the filter cell. The solid particles are deposited on the filter surface to form a filter cake and the purified liquid flows through the filter. It is found that the pressure drop evolution shows the same trend on these two temperatures, which can be divided into three stages with high filtration efficiency, indicating the feasibility of the filter for cryogenic application. However, variant cake resistances are obtained, which is resulted from the different interactions between solid particles in the feed slurry at lower working temperature.
文摘Isolates of X.oryzae pv.oryzae(X.o.o.)re-sistant to Saikuzuo[N,N-methylene-di(2-amino-5-sulfurhydrogen-1,3,4-thioazole)]were selected from laboratory and field for thestudy of their characteristics.The laboratoryresistant mutants had no pathogenicity on rice,and the field resistant isolates did not show re-sistance to Saikuzuo in vitro.These strainsshowed cross resistance to homologue bacteri-cide Dikuzuo(TH-128),but seems no resis-
基金Supported by the National Natural Science Foundation of China under Grant No 51202196the National Aerospace Science Foundation of China under Grant No 2013ZF53067+2 种基金the Natural Science Basic Research Plan in Shaanxi Province of China under Grant No 2014JQ6204the Fundamental Research Funds for the Central Universities under Grant No 3102014JCQ01032the 111 Project under Grant No B08040
文摘Cu/HfOx/n^+Si devices are fabricated to investigate the influence of technological parameters including film thickness and Ar/02 ratio on the resistive switching (RS) characteristics of HfOx films, in terms of switch ratio, endurance properties, retention time and multilevel storage. It is revealed that the RS characteristics show strong dependence on technological parameters mainly by altering the defects (oxygen vacancies) in the film. The sample with thickness of 2Onto and Ar/O2 ratio of 12:3 exhibits the best RS behavior with the potential of multilevel storage. The conduction mechanism of all the films is interpreted based on the filamentary model.
基金Chenzhou Science and Technology Plan Project of China(Grant No.ZDYF2020159)Scientific Research Project of Hunan Provincial Department of Education(Grant No.21C0708)。
文摘Resistive switching(RS)devices have great application prospects in the emerging memory field and neuromorphic field,but their stability and unclear RS mechanism limit their relevant applications.In this work,we construct a hydrogenated Au/SnO_(2)nanowire(NW)/Au device with two back-to-back Schottky diodes and investigate the RS characteristics in air and vacuum.We find that the Ion/Io ff ratio increases from 20 to 10^(4)when the read voltage decreases from 3.1 V to^(-1)V under the condition of electric field.Moreover,the rectification ratio can reach as high as 10^4owing to oxygen ion migration modulated by the electric field.The nanodevice also shows non-volatile resistive memory characteristic.The RS mechanism is clarified based on the changes of the Schottky barrier width and height at the interface of Au/SnO_(2)NW/Au device.Our results provide a strategy for designing high-performance memristive devices based on SnO_(2)NWs.
基金supported jointly by the National Natural Science Foundation Fund of China(Grant No.40930418)ChineseGovernment-funded Scientific Programmed of SinoProbe Deep Exploration in China(SinoProbe-03)the Basic Scientific Research-fund of Institute of Mineral Resources,Chinese Academy of Geological Sciences(Grant No.K1008)
文摘Located in Lu-Zong ore concentration area, middle-lower Yangtze metallogenic belt, ShaXi porphyry copper deposit is a typical hydrothermal deposit. To investigate the distribution of deep ore bodies and spatial characteristics of host structures, an AMT survey was conducted in mining area. Eighteen pseudo-2D resistivity sections were constructed through careful processing and inversion. These sections clearly show resistivity difference between the Silurian sandstones formation and quartz diorite porphyry and this porphyry copper formation was controlled by the highly resistive anticlines. Using 3D block Kxiging interpolation method and 3D visualization techniques, we constructed a detailed 3D resistivity model of quartz diorite porphyry which shows the shape and spatial distribution of deep ore bodies. This case study can serve as a good example for future ore prospecting in and around this mining area.
文摘The flow resistance factors of non-submerged rigid vegetation in open channels were analyzed. The formulas of drag coefficient CD and equivalent Manning's roughness coefficient na were derived by analyzing the force of the flow of non-submerged rigid vegetation in open channel. The flow characteristics and mechanism of non-submerged rigid vegetation in open channel were studied through flume experiments.
基金supported by National Key Technology R&D Program(2012BAB12B02)
文摘Experimental investigation of stepped and straight-through labyrinth seals was designed to study the sealing performance of two different typical labyrinth seals.In order to facilitate dimensional analysis on the flow resistance characteristics of labyrinth seals,the variable cross-section of the flow channels are considered as constant cross-section flow.The mechanical energy loss of flow caused by throttle turbulence intensity is considered as caused by friction along the way.The friction coefficient of stepped labyrinth seals is bigger than that of straight-through labyrinth seals by more than 40% for the same Reynolds number and the ratio of equivalent diameter and the seal length.The expression of friction coefficient /and /Re are obtained from experimental data.The verifications indicate that the expressions are highly accurate.The contribution to the total pressure drop of each tooth cavity gradually becomes less along the flow direction.
基金supported by the National Natural Science Foundation of China(Grant No.51705253).
文摘In this paper,the subdomain analysis model of the eddy current brake(ECB)is established.By comparing with the finite element method,the accuracies of the subdomain model and the finite element model are verified.Furthermore,the resistance characteristics of radial,axial,andHalbach arrays under impact load are calculated and compared.The axial array has a large braking force coefficient but low critical velocity.The radial array has a low braking force coefficient but high critical velocity.The Halbach array has the advantages of the first two arrays.Not only the braking force coefficient is large,but also the critical speed is high.The parameter analysis of the Halbach array is further carried out.The inner tube thickness and air gap length are the sensitive factors of resistance characteristics.The demagnetization effect is significantly enhanced by the increase of the inner tube thickness.In order to ensure that the ECB does not overheat,the electromagnetic-thermal coupling model is established based on the heat transfer theory.The temperature rise of the inner tube is obvious while that of the permanentmagnet is small.The temperature rise of the inner tube is more than 20 K each time,and that of the permanent magnet is less than 1 K each time.
基金Project supported by the Scientific Research Program of Hunan Provincial Education Department,China(Grant No.18C0232)the International Cooperative Extension Program of Changsha University of Science and Technology,China(Grant No.2019IC35)
文摘The novel BaTiO3/BiFeO3/TiO2 multilayer heterojunction is prepared on a fluorine-doped tinoxide(FTO) substrate by the sol–gel method. The results indicate that the Pt/Ba TiO3/BiFeO3/TiO2/FTO heterojunction exhibits stable bipolar resistive switching characteristic, good retention performance, and reversal characteristic. Under different pulse voltages and light fields, four stable resistance states can also be realized. The analysis shows that the main conduction mechanism of the resistive switching characteristic of the heterojunction is space charge limited current(SCLC) effect. After the comprehensive analysis of the band diagram and the P–E ferroelectric property of the multilayer heterojunction, we can deduce that the SCLC is formed by the effect of the oxygen vacancy which is controlled by ferroelectric polarizationmodulated change of interfacial barrier. And the effective photo-generated carrier also plays a regulatory role in resistance state(RS), which is formed by the double ferroelectric layer Ba TiO3/BiFeO3 under different light fields. This research is of potential application values for developing the multi-state non-volatile resistance random access memory(RRAM) devices based on ferroelectric materials.