Nondestructive Testing and Characterization of Residual Stress Field Using an Ultrasonic Method

To address the difficulty in testing and calibrating the stress gradient in the depth direction of mechanical components, a new technology of nondestructive testing and characterization of the residual stress gradient field by ultrasonic method is proposed based on acoustoelasticity theory. By carrying out theoretical analysis, the sensitivity coefficients of different types of ultrasonic are obtained by taking the low carbon steel（12%C） as a research object. By fixing the interval distance between sending and receiving transducers, the mathematical expressions of the change of stress and the variation of time are established. To design one sending-one receiving and oblique incidence ultrasonic detection probes, according to Snell law, the critically refracted longitudinal wave（LCR wave） is excited at a certain depth of the fixed distance of the tested components. Then, the relationship between the depth of LCR wave detection and the center frequency of the probe in Q235 steel is obtained through experimental study. To detect the stress gradient in the depth direction, a stress gradient LCR wave detection model is established, through which the stress gradient formula is derived by the relationship between center frequency and detecting depth. A C-shaped stress specimen of Q235 steel is designed to conduct stress loading tests, and the stress is measured with the five group probes at different center frequencies. The accuracy of ultrasonic testing is verified by X-ray stress analyzer. The stress value of each specific depth is calculated using the stress gradient formula. Accordingly, the ultrasonic characterization of residual stress field is realized. Characterization results show that the stress gradient distribution is consistent with the simulation in ANSYS. The new technology can be widely applied in the detection of the residual stress gradient field caused by mechanical processing, such as welding and shot peening.

Characterization of Short-Term Stress Applied to the Root System by Electrical Impedance Measurement in the First Leaf of Corn(Zea mays L.)and Pumpkin(Cucurbita maxima L.)

We applied electrical spectroscopic impedance measurements (ESI) to the first leaf of intact plants of corn and pumpkin. The electric capacity (C) and resistance (Rp) were determined at the characteristic frequency (FC). We observed that the electrical parameters of the ESI change in relation to the nutrition and the addition to the root medium of KCN, N,N'-dicyclohexylcar-bodiimide (DCCD), CH3COOH, H2SO4, polyethylene glycol 200 (PEG 200) and NaCl. The amplitude of the curves of bioimpedance spectrometry decreased when plant roots were stressed comparatively to their controls. An increase of the electrical capacity with a reduction of the electrical resistance characterizes a stress. The increase of stress intensity provokes decreases of Rp and curve amplitudes and an increase of C. We conclude that electrical parameters studied can be widely used for stress characterization.

ON SOME KEY GEOLOGICAL PROBLEMS RELATED TO THE LINGLONG-JIAOJIA ORE-CENTRALIZED DISTRICT IN SHANDONG PROVINCE,CHINA

The Linglong-Jiaojia ore-centralized district is controlled by the tectonic stress field characterized by the combination of extension and strike-slip, and the dip, dip angle, pitch and pitch angle of the ore bodies are all constrained by the dynamic conditions of the tectonics. The metallotectonic series for the ore-centralized district belong to the type of a combination of extension and strike-slip and can be subdivided into four sub-series. The ore-forming process in the brittle regime can be disintegrated into two stages, i.e., the embryonic fracture stage and the megascopic fracture stage, and ore-forming process is rather common in the ore-centralized district at the former stage. Moreover, several key structural patterns and their features were discussed and a preliminary assessment about the ore-forming prospect in this district was made in the paper.

High Temperature Stress Rupture Anisotropy of a Ni-Based Single Crystal Superalloy

High temperature stress rupture anisotropies of a second generation Ni-base single crystal（SC） superalloy specimens with [001], [011] and [111] orientations under 900 ℃/445 MPa and 1100 ℃/100 MPa have been investigated in the present study, with attentions to the evolution of γ/γ′ microstructure observed by scanning electron microscopy and the dislocation configuration characterized by transmission electron microscopy in each oriented specimen. At 1100 ℃/100 MPa as well as 900 ℃/445 MPa, the single crystal superalloy exhibits obvious stress rupture anisotropic behavior. The [001] oriented specimen has the longest rupture lifetime at 900 ℃/445 MPa, and the [111] oriented sample shows the best rupture strength at 1100 ℃/100 MPa. While the [011] oriented specimen presents the worst rupture lifetime at each testing condition, its stress rupture property at 1100 ℃/100 MPa is clearly improved, compared with900 ℃/445 MPa. The evident stress rupture anisotropy at 900 ℃/445 MPa is mainly attributed to the distinctive movement way of dislocations in each oriented sample. Whereas, at 1100 ℃/100 MPa, together with the individual dislocation configuration, the evolution of γ/γ′ microstructure in each orientation also plays a key role in the apparent stress rupture anisotropy.