Chemical looping combustion has the potential to be an efficient and low-cost technology capable of contributing to the reduction of the atmospheric concentration of CO_(2) in order to reach the 1.5/2°C goal and ...Chemical looping combustion has the potential to be an efficient and low-cost technology capable of contributing to the reduction of the atmospheric concentration of CO_(2) in order to reach the 1.5/2°C goal and mitigate climate change.In this process,a metal oxide is used as oxygen carrier in a dual fluidized bed to generate clean CO_(2) via combustion of biomass.Most commonly,natural ores or synthetic materials are used as oxygen carrier whereas both must meet special requirements for the conversion of solid fuels.Synthetic oxygen carriers are characterized by higher reactivity at the expense of higher costs versus the lower-cost natural ores.To determine the viability of both possibilities,a techno-economic comparison of a synthetic material based on manganese,iron,and copper to the natural ore ilmenite was conducted.The synthetic oxygen carrier was characterized and tested in a pilot plant,where high combustion efficiencies up to 98.4%and carbon capture rates up to 98.5%were reached.The techno-economic assessment resulted in CO_(2) capture costs of 75 and 40€/tCO_(2) for the synthetic and natural ore route respectively,whereas a sensitivity analysis showed the high impact of production costs and attrition rates of the synthetic material.The synthetic oxygen carrier could break even with the natural ore in case of lower production costs and attrition rates,which could be reached by adapting the production process and recycling material.By comparison to state-of-the-art technologies,it is demonstrated that both routes are viable and the capture cost of CO_(2) could be reduced by implementing the chemical looping combustion technology.展开更多
Chemical looping combustion （CLC） of carbonaceous compounds has been proposed, in the past decade, as an efficient method for CO2 capture without cost of extra energy penalties. The technique involves the use of a m...Chemical looping combustion （CLC） of carbonaceous compounds has been proposed, in the past decade, as an efficient method for CO2 capture without cost of extra energy penalties. The technique involves the use of a metal oxide as an oxygen carrier that transfers oxygen from combustion air to fuels. The combustion is carried out in a two-step process： in the fuel reactor, the fuel is oxidized by a metal oxide, and in the air reactor, the reduced metal is oxidized back to the original phase. The use of iron oxide as an oxygen carrier has been investigated in this article. Particles composed of 80 wt% Fe2O3, together with Al2O3 as binder, have been prepared by impregnation methods. X-ray diffraction （XRD） analysis reveals that Fe2O3 does not interact with the Al2O3 binder after multi-cycles. The reactivity of the oxygen carrier particles has been studied in twenty-cycle reduction-oxidation tests in a thermal gravimetrical analysis （TGA） reactor. The components in the outlet gas have been analyzed. It has been observed that about 85% of CH4 converted to CO2 and H2O during most of the reduction periods. The oxygen carrier has kept quite a high reactivity in the twenty-cycle reactions. In the first twenty reaction cycles, the reaction rates became slightly higher with the number of cyclic reactions increasing, which was confirmed by the scanning electron microscopy （SEM） test results. The SEM analysis revealed that the pore size inside the particle had been enlarged by the thermal stress during the reaction, which was favorable for diffusion of the gaseous reactants into the particles. The experimental results suggested that the Fe2O3/Al2O3 oxygen carrier was a promising candidate for a CLC system.展开更多
The cycle life of oxygen carrier（OC） is crucial to the practical applications of chemical looping combustion（CLC）. Cycle performance of Cu/SiO2 prepared with a mechanical mixing method was evaluated based on a CLC...The cycle life of oxygen carrier（OC） is crucial to the practical applications of chemical looping combustion（CLC）. Cycle performance of Cu/SiO2 prepared with a mechanical mixing method was evaluated based on a CLC process characterized with an added methane steam reforming step. The Cu/SiO2 exhibited high redox reactivity in the initial cycles, while the performance degraded with cycle number. Through characterization of the degraded Cu/SiO2, the performance degradation was mainly caused by the secondary particles＇ fragmentation and the fine particles＇ local agglomeration, which worsened the distribution and diffusion of the reactive gases in the packed bed. A regeneration method of the degraded OC based on re-granulation has been proposed, and its mechanism has been illustrated. With this method, the performance of the degraded OC through 420 redox cycles was recovered to a level close to the initial one.展开更多
The chemical looping gasification uses an oxygen carrier for solid fuel gasification by supplying insufficient lattice oxygen. The effect of gasifying medium on the coal chemical looping gasification with Ca SO4 as ox...The chemical looping gasification uses an oxygen carrier for solid fuel gasification by supplying insufficient lattice oxygen. The effect of gasifying medium on the coal chemical looping gasification with Ca SO4 as oxygen carrier is investigated in this paper. The thermodynamical analysis indicates that the addition of steam and CO2 into the system can reduce the reaction temperature, at which the concentration of syngas reaches its maximum value.Experimental result in thermogravimetric analyzer and a fixed-bed reactor shows that the mixture sample goes through three stages, drying stage, pyrolysis stage and chemical looping gasification stage, with the temperature for three different gaseous media. The peak fitting and isoconversional methods are used to determine the reaction mechanism of the complex reactions in the chemical looping gasification process. It demonstrates that the gasifying medium(steam or CO2) boosts the chemical looping process by reducing the activation energy in the overall reaction and gasification reactions of coal char. However, the mechanism using steam as the gasifying medium differs from that using CO2. With steam as the gasifying medium, parallel reactions occur in the beginning stage, followed by a limiting stage shifting from a kinetic to a diffusion regime. It is opposite to the reaction mechanism with CO2 as the gasifying medium.展开更多
Efficiently using petroleum coke as fuel and reducing carbon emission meanwhile have become attractive in oil processing industry.The paper is focused on the application of Chemical Looping Combustion(CLC)with petrole...Efficiently using petroleum coke as fuel and reducing carbon emission meanwhile have become attractive in oil processing industry.The paper is focused on the application of Chemical Looping Combustion(CLC)with petroleum coke,with the purpose of investigating its combustion performance and effects of potassium.Some experiments were performed in a laboratory scale fluidized bed facility with a natural manganese-based oxygen carrier.Experimental results indicated that the coke conversion is very sensitive to reaction temperature.The pre sent natural manganese-based oxygen carrier decorated by K has little effect on the improvement of coke conversion.XRD,SEM-EDX,and H2-TPR were adopted to characterize the reacted oxygen carrier samples.After being decorated by K,the oxygen carrier's capacity of transferring oxygen was decrea sed.A calcination temperature above the melting point of K2 CO3(891℃)shows better oxygen transfer reactivity in comparison to the one calcined at a lower temperature.The natural oxygen carrier used in the work has a high content of Si,which can easily react with K to form K(FeSi2 O6).Further,irrespective of reaction temperature,the coke conversion can be significantly enhanced by decorating the coke with K,with a demonstration of remarkably shorter reaction time,faster average coke gasification rate and higher average carbon conversion rate.展开更多
Calcium sulfate(CaSO_(4))has been verified as a promising oxygen carrier(OC)in the chemical looping combustion(CLC)for its high oxygen capacity,abundant reserve and low cost,but its low reactivity and deleterious sulf...Calcium sulfate(CaSO_(4))has been verified as a promising oxygen carrier(OC)in the chemical looping combustion(CLC)for its high oxygen capacity,abundant reserve and low cost,but its low reactivity and deleterious sulfur species emission from the side reactions of CaSO_(4) should be well considered for its wide application in CLC.In order to promote the reactivity of CaSO_(4) and increase its potential to inhibit the gaseous sulfur emission,a CeO_(2)-enhanced CaSO_(4) OC mixed OC of core–shell structure was prepared using the combined template synthesis method.Reaction characteristics of the prepared CaSO_(4)-CeO_(2) mixed OC with a typical lignite was first conducted and systematically investigated,and an improved reactivity of the prepared CaSO_(4)-CeO_(2) mixed OC was demonstrated than its single component CaSO_(4) or CeO_(2) due to the fast transfer and exchange of oxygen from the CaSO_(4) substrate to coal via the doped CeO_(2).Furthermore,the solid products formed from the mixed CaSO_(4)-CeO_(2) OC with the selected coal were collected and analyzed.Especially,evolution and redistribution of the sulfur species of different forms were focused.At the latter reaction stage of YN reaction with the CaSO_(4)-CeO_(2) mixed OC,the SO_(2) emitted from the side reactions of CaSO_(4) was greatly diminished and the doped CeO_(2) was proven effective to directionally fix the SO_(2) released to turn into different solid sulfur compounds,which were determined as Ce_(2)O_(2)S,Ce_(2)S_(3) and Ce_(2)(SO_(4))_(3)·5H_(2)O and formed through the different pathways.In addition,good regeneration of the reduced CaSO_(4)-CeO_(2) mixed OC could be reached in spite of the unavoidable interaction between the included minerals in coal and the reduced mixed OC.Overall,the combined template method-made CaSO_(4)-CeO_(2) mixed OC reported herein was not only endowed with enhanced reactivity for coal conversion,but also owned the potential to directionally fix the gaseous sulfur emission,which is quite applicable as OC for simultaneous decarbonatization and desulfurization in the real CLC process.展开更多
文摘Chemical looping combustion has the potential to be an efficient and low-cost technology capable of contributing to the reduction of the atmospheric concentration of CO_(2) in order to reach the 1.5/2°C goal and mitigate climate change.In this process,a metal oxide is used as oxygen carrier in a dual fluidized bed to generate clean CO_(2) via combustion of biomass.Most commonly,natural ores or synthetic materials are used as oxygen carrier whereas both must meet special requirements for the conversion of solid fuels.Synthetic oxygen carriers are characterized by higher reactivity at the expense of higher costs versus the lower-cost natural ores.To determine the viability of both possibilities,a techno-economic comparison of a synthetic material based on manganese,iron,and copper to the natural ore ilmenite was conducted.The synthetic oxygen carrier was characterized and tested in a pilot plant,where high combustion efficiencies up to 98.4%and carbon capture rates up to 98.5%were reached.The techno-economic assessment resulted in CO_(2) capture costs of 75 and 40€/tCO_(2) for the synthetic and natural ore route respectively,whereas a sensitivity analysis showed the high impact of production costs and attrition rates of the synthetic material.The synthetic oxygen carrier could break even with the natural ore in case of lower production costs and attrition rates,which could be reached by adapting the production process and recycling material.By comparison to state-of-the-art technologies,it is demonstrated that both routes are viable and the capture cost of CO_(2) could be reduced by implementing the chemical looping combustion technology.
基金Supported by the National Natural Science Foundation of China (No.50574046 and 50164002, )Natural Science Foun-dation of Yunnan Province (No. 2004E0012Q).
文摘Chemical looping combustion （CLC） of carbonaceous compounds has been proposed, in the past decade, as an efficient method for CO2 capture without cost of extra energy penalties. The technique involves the use of a metal oxide as an oxygen carrier that transfers oxygen from combustion air to fuels. The combustion is carried out in a two-step process： in the fuel reactor, the fuel is oxidized by a metal oxide, and in the air reactor, the reduced metal is oxidized back to the original phase. The use of iron oxide as an oxygen carrier has been investigated in this article. Particles composed of 80 wt% Fe2O3, together with Al2O3 as binder, have been prepared by impregnation methods. X-ray diffraction （XRD） analysis reveals that Fe2O3 does not interact with the Al2O3 binder after multi-cycles. The reactivity of the oxygen carrier particles has been studied in twenty-cycle reduction-oxidation tests in a thermal gravimetrical analysis （TGA） reactor. The components in the outlet gas have been analyzed. It has been observed that about 85% of CH4 converted to CO2 and H2O during most of the reduction periods. The oxygen carrier has kept quite a high reactivity in the twenty-cycle reactions. In the first twenty reaction cycles, the reaction rates became slightly higher with the number of cyclic reactions increasing, which was confirmed by the scanning electron microscopy （SEM） test results. The SEM analysis revealed that the pore size inside the particle had been enlarged by the thermal stress during the reaction, which was favorable for diffusion of the gaseous reactants into the particles. The experimental results suggested that the Fe2O3/Al2O3 oxygen carrier was a promising candidate for a CLC system.
基金supported by the Beijing Science and Technology Program(Grant no.Z131100005613045)the National Natural Science Foundation of China(Grant no.51306015)the Fundamental Research Funds for the Central Universities(Grant no.FRF-SD-12-013A)
文摘The cycle life of oxygen carrier（OC） is crucial to the practical applications of chemical looping combustion（CLC）. Cycle performance of Cu/SiO2 prepared with a mechanical mixing method was evaluated based on a CLC process characterized with an added methane steam reforming step. The Cu/SiO2 exhibited high redox reactivity in the initial cycles, while the performance degraded with cycle number. Through characterization of the degraded Cu/SiO2, the performance degradation was mainly caused by the secondary particles＇ fragmentation and the fine particles＇ local agglomeration, which worsened the distribution and diffusion of the reactive gases in the packed bed. A regeneration method of the degraded OC based on re-granulation has been proposed, and its mechanism has been illustrated. With this method, the performance of the degraded OC through 420 redox cycles was recovered to a level close to the initial one.
基金Supported by the Research and Development Program of the Korea Institute of Energy Research(KIER)(B4-2431-04)the National Natural Science Foundation of China(21276129,20876079)the Natural Science Funds for Distinguished Young Scholar in Shandong Province(JQ200904)
文摘The chemical looping gasification uses an oxygen carrier for solid fuel gasification by supplying insufficient lattice oxygen. The effect of gasifying medium on the coal chemical looping gasification with Ca SO4 as oxygen carrier is investigated in this paper. The thermodynamical analysis indicates that the addition of steam and CO2 into the system can reduce the reaction temperature, at which the concentration of syngas reaches its maximum value.Experimental result in thermogravimetric analyzer and a fixed-bed reactor shows that the mixture sample goes through three stages, drying stage, pyrolysis stage and chemical looping gasification stage, with the temperature for three different gaseous media. The peak fitting and isoconversional methods are used to determine the reaction mechanism of the complex reactions in the chemical looping gasification process. It demonstrates that the gasifying medium(steam or CO2) boosts the chemical looping process by reducing the activation energy in the overall reaction and gasification reactions of coal char. However, the mechanism using steam as the gasifying medium differs from that using CO2. With steam as the gasifying medium, parallel reactions occur in the beginning stage, followed by a limiting stage shifting from a kinetic to a diffusion regime. It is opposite to the reaction mechanism with CO2 as the gasifying medium.
基金supported by the National Natural Foundation of China(51906113)Natural Science Foundation of Jiangsu province(BK20190707)+1 种基金Key Research and Development(R&D)Projects of Shanxi Province(201903D121031)Foundation of State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering(Grant No.2020-KF-05)。
文摘Efficiently using petroleum coke as fuel and reducing carbon emission meanwhile have become attractive in oil processing industry.The paper is focused on the application of Chemical Looping Combustion(CLC)with petroleum coke,with the purpose of investigating its combustion performance and effects of potassium.Some experiments were performed in a laboratory scale fluidized bed facility with a natural manganese-based oxygen carrier.Experimental results indicated that the coke conversion is very sensitive to reaction temperature.The pre sent natural manganese-based oxygen carrier decorated by K has little effect on the improvement of coke conversion.XRD,SEM-EDX,and H2-TPR were adopted to characterize the reacted oxygen carrier samples.After being decorated by K,the oxygen carrier's capacity of transferring oxygen was decrea sed.A calcination temperature above the melting point of K2 CO3(891℃)shows better oxygen transfer reactivity in comparison to the one calcined at a lower temperature.The natural oxygen carrier used in the work has a high content of Si,which can easily react with K to form K(FeSi2 O6).Further,irrespective of reaction temperature,the coke conversion can be significantly enhanced by decorating the coke with K,with a demonstration of remarkably shorter reaction time,faster average coke gasification rate and higher average carbon conversion rate.
基金supported by the National Natural Science Founda-tion of China(Nos.51776073,51906083)Key Research&Develop-ment program of Henan Province(No.162102210233)+1 种基金North China University of Water Resources and Electric Power Innovative Project(Nos.2019XA014,2019XB058)Scientific Research&Development Project of Ji-Yan Energy Science and Technology Research Institute(NKY2020-05).
文摘Calcium sulfate(CaSO_(4))has been verified as a promising oxygen carrier(OC)in the chemical looping combustion(CLC)for its high oxygen capacity,abundant reserve and low cost,but its low reactivity and deleterious sulfur species emission from the side reactions of CaSO_(4) should be well considered for its wide application in CLC.In order to promote the reactivity of CaSO_(4) and increase its potential to inhibit the gaseous sulfur emission,a CeO_(2)-enhanced CaSO_(4) OC mixed OC of core–shell structure was prepared using the combined template synthesis method.Reaction characteristics of the prepared CaSO_(4)-CeO_(2) mixed OC with a typical lignite was first conducted and systematically investigated,and an improved reactivity of the prepared CaSO_(4)-CeO_(2) mixed OC was demonstrated than its single component CaSO_(4) or CeO_(2) due to the fast transfer and exchange of oxygen from the CaSO_(4) substrate to coal via the doped CeO_(2).Furthermore,the solid products formed from the mixed CaSO_(4)-CeO_(2) OC with the selected coal were collected and analyzed.Especially,evolution and redistribution of the sulfur species of different forms were focused.At the latter reaction stage of YN reaction with the CaSO_(4)-CeO_(2) mixed OC,the SO_(2) emitted from the side reactions of CaSO_(4) was greatly diminished and the doped CeO_(2) was proven effective to directionally fix the SO_(2) released to turn into different solid sulfur compounds,which were determined as Ce_(2)O_(2)S,Ce_(2)S_(3) and Ce_(2)(SO_(4))_(3)·5H_(2)O and formed through the different pathways.In addition,good regeneration of the reduced CaSO_(4)-CeO_(2) mixed OC could be reached in spite of the unavoidable interaction between the included minerals in coal and the reduced mixed OC.Overall,the combined template method-made CaSO_(4)-CeO_(2) mixed OC reported herein was not only endowed with enhanced reactivity for coal conversion,but also owned the potential to directionally fix the gaseous sulfur emission,which is quite applicable as OC for simultaneous decarbonatization and desulfurization in the real CLC process.
