Influence of intrinsic parameters on the particle size of magnetic spinel nanoparticles synthesized by wet chemical methods

The synthesis of magnetic spinel ferrites at the nanoscale is a field of intense study, because the meso- scopic properties enable their novel applications. Spinel nanoparticles have a promising role because of their extraordinary properties compared with those of micro and macro scale particles. Several colloidal chemical synthetic procedures have been developed to produce monodisperse nanoparticles of spinel let- rites and other materials using sol-gel, co-precipitation, hydrothermal, and microemulsion techniques. To improve the synthesis method and conditions, quality and productivity of these nanoparticles, understanding the effect of extrinsic （pH, temperature, and molecular concentration） and intrinsic parameters （site preferences, latent heat, lattice parameters, electronic configuration, and bonding energy） on the particle size during synthesis is crucial. In this review, we discuss the effect of the intrinsic parameters on particle size of spinel ferrites to provide an insight to control their particle size more precisely.

Effects of Varieties and Cooking Methods on Physical and Chemical Characteristics of Cooked Rice

To analyze the effect of different lowland rice varieties and different cooking methods on physical and chemical characteristics of cooked rice. A factorial randomized block design with two factors was used and each combination of the factors was repeated three times. The first factor was rice variety（Ciherang and Ciliwung） and the second factor was the cooking method（stovetop, boiling and steaming, and rice cooker）. Results showed that Ciherang and Ciliwung varieties were classified into slender grain rice type with yellowred color. The amylose content of Ciherang was classified as moderate, while the amylose content of Ciliwung classified as low. The most abundant amino acid contained in Ciherang and Ciliwung varieties was glutamic acid. Statistical analysis showed that cooking method had significant effects on texture, lightness, chroma, hue and moisture content of cooked rice. Rice cooked with liwet method had the lowest texture value, lowest lightness value, highest chroma value, and highest moisture content.

Synthesis and Characterization of Y-Doped Mesoporous CeO_2 Using A Chemical Precipitation Method

Using cetyltrimethylammonium bromide （CTAB） as the template agent, cerium nitrate as the cerium resource, yttrium nitrate as the yttrium resource, and ammonium carbonate as the precipitating agent, mesoporous CeO2 powders doped with different yttrium contents were successfully synthesized using a chemical precipitation method, under an alkalescent condition. Properties of the obtained samples were characterized and analyzed with X-ray diffraction （XRD）, energy dispersive analysis of X-rays （EDAX）, transmission electron microscopy （TEM）, infrared （IR） absorbance, and the BET method. For the prepared samples with 20% （molar ratio） Y-doped content, a BET specific surface area of 106. 6 m^2 · g^- 1, with an average pore size of3~27 nm were obtained. XRD patterns showed that the doped samples were with a cubic fluorite structure. TEM micrographs revealed that the doped samples showed a spherical morphology with a diameter ranging from 20 to 30 nm and a round pore shape. IR results indicated that the Ce-O-Ce vibration intensity decreased as the Y-doped content increased. N2 adsorption-desorption isotherms showed that the samples possessed typical mesopore characteristics. The average pore size of the samples decreased alter mesoporous CeO2 was doped with yttrium, and the average pore size decreased largely as the Y-doped content increased.

Deposition of Bioactive Layer on NiTi Alloy by Chemical Treatment

A simple chemical method was developed for inducing bioactivity on NiTi alloys (50 at. pct by Ni/Ti). A layer of calcium phosphate was deposited on the surface to improve biocompatibility of the alloy. NiTi alloys were first etched in HNO3 aqueous solution, and then treated with boiling diluted NaOH solution. A rough surface was created and a thin TiO2 layer was formed on the surface. Pre-calcification was then introduced by immersing the treated NiTi alloys in supersaturated Na2HPO4 solution and supersaturated Ca(OH)2 solution in turn before calcification in simulated body fluid (SBF). A dense and uniform bonelike calcium phosphate (Ca-P) bioactive layer was formed on the surfaces of the specimen, which would improve their biocompatibility. Morphology and element analysis on NiTi surfaces during the treatments were investigated in detail by means of environment scanning electron microscopy (ESEM), energy dispersion X-ray spectroscopy (EDXS), and X-ray diffraction (XRD).

Effects of Heating Processing on Microstructure and Magnetic Properties of Mn-Zn Ferrites Prepared via Chemical Co-precipitation

The fine powders of Mn-Zn ferrites with uniform size were prepared via chemical co- precipitation method. X-ray diffraction analysis （XRD）, scanning electron microscopy （SEM）, vibrating sample magnetometer （VSM）, frequency dependence of permeability and metallographical microscope were used to investigate the crystal structure, surface topography and magnetic properties of the powders and the sintering samples. The experimental results demonstrate that the precursor powders have formed a pure phase cubic spinel MnxZn1-xfe2O4 while in the reactor and show definite magnetism, which can solve the difficult issue in washing process effectively. When calcined beneath 450 ℃, the powders have intact crystal form and the crystallite size is less than 20 nm. Comparison tests of sintering temperatures show that 1 300 ℃ is the ideal sintering temperature for Mn-Zn ferrites prepared by using the chemical co-precipitation.

Chemical Analysis Method for Carbon Bearing Refractory Products——Determination of the Total Carbon by Combustion Gravimetric Method

GB/T 13245-91 1 Theme and Scope This standard specifies the method abstract, reagents, apparatus, specimen, analyzing procedure, result calculation and permissible tolerance used for determination of the total carbon with combustion gravimetric method.

Chemical Analysis Method for Magnesia and Magnesia-Alumina Refractories——Gravimetric-Molybdenum Blue Photometric Method for Determination of Silicon Dioxide Content

This standard specifies the gravimetric-molybdenum blue photometric method for determination of silicon dioxide content.

Quantum Chemical Calculation on the Structures and Electronic Properties of Phosphonate Ester as Rare Earth Extractants

Molecular mechanics, molecular dynamics and semi empirical quantum chemical method have been used to study the geometric and electronic structures of six phosphonate ester as rare earth extractants. The results show that the phosphorus atom exhibits sp 3 hybridization. The structures of the extractants are determined by the repulsion of the hydrocarbon groups. In the extractants that have two 2 ethyl hexyl groups, one 2 ethyl hexyl extends straight, and the other extends twistily. When the number of oxygen atom decreases, the negative charge of the phosphoryl oxygen atom increases, but the negative charge of oxygen atom and the positive charge of hydrogen of the hydroxyl group decreases, and the energies of highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital(LUMO) increase. The energies of the occupied frontier orbitals are close to each other.

The Preparation of Nano Silver by Chemical Reduction Method

A silver nanostructures prepared by using chemical reduction method. The silver nanoparticles were prepared with diameters of about (20 nm). Numerous techniques had been used to study the optical, structural like the UV-Vis absorption spectrometer, Ttransmission Electron Microscopy (TEM), Field-Emission Scanning Electron microscope (FESEM), and X-ray diffraction (XRD). The practical results exhibited the absorption spectrum of the prepared nanoparticles at (357 nm), it was found that there is a relationship between the positions of the optical absorption peak and the size of the silver nanoparticles. The analysis of TEM results showed the presence of nanoparticles in the range (20 nm). The analyzing of XRD results explained the crystal structure for silver nanoparticles. It is found a cubic unit cell have a lattice constants (a = 4.0855 Å), with the Miller indices were (111), (002), (002), and (113).

Synthesis and electrochemical performance of a novel nano sized Sn_2SbNi composite

Chemical reduction method was employed to prepare nano-sized Sn2SbNi alloy composites used as anode material for rechargeable lithium ion batteries.This strategy was adopted to combine the virtues of both active/inactive and active/active alloys to fabricate a Sn2SbNi alloy powder with two active components and one inactive component.The two active components can realize the high capacity feature of electrode and can make the volume change of electrode take place in a stepwise manner due to the different lithiation potentials of two active components,leading to a stable cycling performance.Sn2SbNi alloy provides a reversible specific capacity over 640 mA·h/g with an excellent cyclic ability.The Sn-Sb-Ni alloy composite material shows to be a good candidate anode material for the lithium ion batteries.

Preparation of Superhydrophobic ZnO Films on Zinc Substrate by Chemical Solution Method

Superhydrophobic surface was prepared on the zinc substrate by chemical solution method via immersing clean pure zinc substrate into a water solution of zinc nitrate hexahydrate[Zn（NO3）2.6H2O] and hexamethylenete- traamine（C6H12N4） at 95 ℃ in water bath for 1.5 h, then modified with 18 alkanethiol. The best resulting surface shows superhydrophobic properties with a water contact angle of about 158° and a low water roll-off angle of around 3°. The prepared samples were characterized by powder X-ray diffraction（XRD）, X-ray photoelectron spectroscopy （XPS）, energy-dispersive X-ray spectroscopy（EDX）, transmission electron microscopy（TEM）, and scanning electron microscopy（SEM）. SEM images of the films show that the resulting surface exhibits flower-shaped micro- and nano-structure. The surfaces of the prepared films were composed of ZnO nanorods which were wurtzite structure. The special flower-like micro- and nano-structure along with the low surface energy leads to the surface superhydro- phobicity.

Chemical Analysis Method for Carbon Bearing Refractory Products——Determination of Magnesium Oxide Content by CyDTA Volumetric Method

This standard specifies the method summary, reagents, apparatus, sampling, procedure, test results calculation and permissible tolerance of the determination of magnesium oxide by CyDTA volumetric method.

Improvements of marine clay slurries using chemicale-physical combined method(CPCM)

In this paper, the effectiveness, applicability and validity of chemicalephysical combined methods（CPCMs） for treatment of marine clay （MC） slurries were evaluated. The method CPCM1 combineschemical stabilization and vacuum preloading （VP）, while CPCM2 is similar to CPCM1 but includes boththe application of surcharge and use of geo-bags to provide confinement during surcharge preloading.The key advantage of CPCM2 using geo-bags is that the surcharge can be immediately applied on thechemically stabilized slurries. Two types of geo-bags were investigated under simulated land filling anddyke conditions, respectively. The test results show that the shear strength （cu） of treated slurry byCPCM2 is generally much higher than that by CPCM1. Besides, the use of CPCM2 can significantly reducethe treatment time due to the short drainage paths created by geo-bags. Overall, CPCM2 allows fasterconsolidation and higher preloading that help to achieve higher mechanical properties of the stabilizedslurry. There are consistent relationships between cU and water content of slurries treated by CPCM2.Several important observations were also made based on comparisons of experimental data. 2015 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. All rights reserved.

A FACILE CHEMICAL SYNTHESIS of PENTADEOXYRIBONUCLEOTIDE d-TGGGT via PHOSPHOTRIESTER METHOD

In this paper,we report the chemical synthesis of oligonucleotide d-TGGGT using phosphotriester method.The protected pentamer d-MmtTGibGibGibT(=p-ClC6H_4-O(O)P)was deblocked by treatment with concentrated ammonium hydroxide and 80% acetic acid.The pure d-TGGGT obtained by chromatorgraphy on DEAE-Sephadex A-25 and Q-Sepharose FF could be hydrolyzed completely and confirmed by base ratio.

Fe3O4 and Fe Nanoparticles by Chemical Reduction of Fe(acac)3 by Ascorbic Acid: Role of Water

Nanoparticles of Fe3O4 and Fe are chemically synthesized by reduction of Fe(acac)3 using ascorbic acid in controlled condition. It was observed that addition of water during the chemical synthesis process yields Fe3O4 nanoparticles, whereas if the reaction is carried out in absence of water yields Fe nanoparticles—which get oxidized upon exposure to air atmosphere. Fe3O4 (15 ± 5 nm) and Fe/iron oxide nanoparticles (7 ± 1 nm) were successfully synthesized in the comparative study reported herewith. Mechanism for formation/synthesis of Fe3O4 and Fe/iron oxide nanoparticles is proposed herewith in which added water acts as an oxygen supplier. Physico-chemical characterization done by SEM, TEM, EDAX, and XPS supports the proposed mechanism.

Hyperfine splitting and ferromagnetism in CdS:Mn nanoparticles for optoelectronic device applications

Manganese(Mn)doped cadmium sulphide(Cd S)nanoparticles were synthesized using a chemical method.It was possible to decrease Cd S:Mn particle size by increasing Mn concentration.Investigation techniques such as ultraviolet-visible(UV-Vis)absorption spectroscopy and photoluminescence(PL)spectroscopy were used to determine optical properties of Cd S:Mn nanoparticles.Size quantization effect was observed in UV-Vis absorption spectra.Quantum efficiency for luminescence or the internal magnetic field strength was increased by doping Cd S nanoparticles with Mn element.Orange emission was observed at wavelength~630 nm due to ^(4)T_1→^(6)A_1 transition.Isolated Mn~(2+)ions arranged in tetrahedral coordination are mainly responsible for luminescence.Luminescence quenching and the effect of Mn doping on hyperfine interactions in the case of Cd S nanoparticles were also discussed.The corresponding weight percentage of Mn element actually incorporated in doping process was determined by atomic absorption spectroscopy(AAS).Crystallinity was checked and the average size of nanoparticles was estimated using the X-ray diffraction(XRD)technique.Cd S:Mn nanoparticles show ferromagnetism at room temperature.Transmission electron microscopy(TEM)images show spherical clusters of various sizes and selected area electron diffraction(SAED)patterns show the polycrystalline nature of the clusters.The electronic states of diluted magnetic semiconductors(DMS)ofⅡ-Ⅵgroup Cd S nanoparticles give them great potential for applications due to quantum confinement.In this study,experimental results and discussions on these aspects have been given.

Preparation and photocatalytic activity of PANI/TiO_2 composite film

A PANI/TiO2 composite film deposited on the glass surface was successfully prepared using sol-gel dip-coating technique and chemical oxidation method. The film was characterized using XRD, AFM, and UV. The result showed that the TiO2 film consists of both cuboid-shaped and anatase-phased TiO2 nanoparticles. The average grain size of TiO2 in the film was approximately 20 nm. After coating with PANI, the particle was changed into irregular spherical-shaped and the size was increased up to approximately 35 nm in diameter. UV-Vis spectroscopy analysis indicated that the coating of TiO2 with PANI would result in an enhancement of photocatalytic efficiency and an extension of the photoresponse of TiO2. The band gap of the PANI/TiO2 film was 3.18 eV. The photocatalytic property of the film was evaluated by the degradation of rhodamine-B. It was found that 67.1% and 83.2% of rhodamine-B could be degraded under sunlight and UV irradiation within 120 min using the PANI/TiO2 composite t-tim as photocatalyst.

First-principles study on anatase TiO_2 codoped with nitrogen and praseodymium

The crystal structures, electronic structures and optical properties of nitrogen or/and praseodymium doped anatase TiO2 were calculated by first principles with the plane-wave ultrasoft pseudopotential method based on density functional theory. Highly efficient visible-light-induced nitrogen or/and praseodymium doped anatase TiO2 nanocrystal photocatalyst were synthesized by a microwave chemical method. The calculated results show that the photocatalytic activity of TiO2 can be enhanced by N doping or Pr doping, and can be further enhanced by N＋Pr codoping. The band gap change of the codoping TiO2 is more obvious than that of the single ion doping, which results in the red shift of the optical absorption edges. The results are of great significance for the understanding and further development of visible-light response high activity modified TiO2 photocatalyst. The photocatalytic activity of the samples for methyl blue degradation was investigated under the irradiation of fluorescent light. The experimental results show that the codoping TiO2 photocatalytic activity is obviously higher than that of the single ion doping. The experimental results accord with the calculated results.