Laser performance is greatly dependent on its operating conditions due to the strong coupling among multi- physics such as gas-dynamics, chemical reaction kinetics and optics in the mixing nozzle of COIL. In this pape...Laser performance is greatly dependent on its operating conditions due to the strong coupling among multi- physics such as gas-dynamics, chemical reaction kinetics and optics in the mixing nozzle of COIL. In this paper, 3D CFD technology is used to simulate the mixing and reactive flow of subsonic cross jet scheme at different conditions. Results obtained show that the jet penetration depth plays a dominant role in the spatial distribution of small signal gains. In the case of over-penetration, unsteady flow structures are induced by impinging between the opposing jets. The optimum spatial distribution of the chemical performance cannot be obtained even if the full penetration condition is achieved through the subsonic transverse jet mixing scheme in the COIL nozzle flow.展开更多
A phase retarder used in chemical oxygen-iodine laser （COIL） system has been fabricated by ion beam sputtering （IBS）. When the incident angle is 45°the reflectivity is about 99.9% from 1290 to 1340 nm and abo...A phase retarder used in chemical oxygen-iodine laser （COIL） system has been fabricated by ion beam sputtering （IBS）. When the incident angle is 45°the reflectivity is about 99.9% from 1290 to 1340 nm and about 83.8% at 632.8 nm, and the phase retardance between the parallel and perpendicular polarization components is -92.8°at 1315 nm. In order to get the influence of temperature on the phase retarder, six samples have been annealed from 523 to 648 K at interval of 25 K in air respectively, and the results show good temperature performance, With increasing temperature phase retardance becomes smaller, and the variation is within 4° at 1315 nm. At the same time, the variation maintains within ±10° for the incidence from 44°to 49°.展开更多
A pulsed chemical oxygen-iodine laser （COIL） using atomic iodine generated by volumetric discharge of CHaI is developed and tested. COIL with a gain length of 60 cm is energized by a square pipe-array jet singlet ox...A pulsed chemical oxygen-iodine laser （COIL） using atomic iodine generated by volumetric discharge of CHaI is developed and tested. COIL with a gain length of 60 cm is energized by a square pipe-array jet singlet oxygen generator with basic hydrogen peroxide pumping circulations and operated at subsonic gas flow. Maximum output energy of 4.3 J, pulse duration of 50 #s, specific energy extraction from the active medium of 2.0 J/L, and the maximum chemical efficiency of 12.5% are achieved at a chlorine flow rate of 55 mmole/s.展开更多
A semi-gas kinetics (SGK) model for performance analyses of flowing chemical oxygen-iodine laser (COIL) is presented. In this model, the oxygen-iodine reaction gas flow is treated as a continuous medium, and the effec...A semi-gas kinetics (SGK) model for performance analyses of flowing chemical oxygen-iodine laser (COIL) is presented. In this model, the oxygen-iodine reaction gas flow is treated as a continuous medium, and the effect of thermal motions of particles of different laser energy levels on the performances of the COIL is included and the velocity distribution function equations are solved by using the double-parameter perturbational method. For a premixed flow, effects of different chemical reaction systems, different gain saturation models and temperature, pressure, yield of excited oxygen, iodine concentration and frequency-shift on the performances of the COIL are computed, and the calculated output power agrees well with the experimental data. The results indicate that the power extraction of the SGK model considering 21 reactions is close to those when only the reversible pumping reaction is considered, while different gain saturation models and adjustable parameters greatly affect the output power, the optimal threshold gain range, and the length of power extraction.展开更多
基金the Korea Research Foundation Grant No.KRF-2005-005-J09901
文摘Laser performance is greatly dependent on its operating conditions due to the strong coupling among multi- physics such as gas-dynamics, chemical reaction kinetics and optics in the mixing nozzle of COIL. In this paper, 3D CFD technology is used to simulate the mixing and reactive flow of subsonic cross jet scheme at different conditions. Results obtained show that the jet penetration depth plays a dominant role in the spatial distribution of small signal gains. In the case of over-penetration, unsteady flow structures are induced by impinging between the opposing jets. The optimum spatial distribution of the chemical performance cannot be obtained even if the full penetration condition is achieved through the subsonic transverse jet mixing scheme in the COIL nozzle flow.
文摘A phase retarder used in chemical oxygen-iodine laser （COIL） system has been fabricated by ion beam sputtering （IBS）. When the incident angle is 45°the reflectivity is about 99.9% from 1290 to 1340 nm and about 83.8% at 632.8 nm, and the phase retardance between the parallel and perpendicular polarization components is -92.8°at 1315 nm. In order to get the influence of temperature on the phase retarder, six samples have been annealed from 523 to 648 K at interval of 25 K in air respectively, and the results show good temperature performance, With increasing temperature phase retardance becomes smaller, and the variation is within 4° at 1315 nm. At the same time, the variation maintains within ±10° for the incidence from 44°to 49°.
文摘A pulsed chemical oxygen-iodine laser （COIL） using atomic iodine generated by volumetric discharge of CHaI is developed and tested. COIL with a gain length of 60 cm is energized by a square pipe-array jet singlet oxygen generator with basic hydrogen peroxide pumping circulations and operated at subsonic gas flow. Maximum output energy of 4.3 J, pulse duration of 50 #s, specific energy extraction from the active medium of 2.0 J/L, and the maximum chemical efficiency of 12.5% are achieved at a chlorine flow rate of 55 mmole/s.
基金supported by the National Natural Science Foundation of China(Grant No.10032050).
文摘A semi-gas kinetics (SGK) model for performance analyses of flowing chemical oxygen-iodine laser (COIL) is presented. In this model, the oxygen-iodine reaction gas flow is treated as a continuous medium, and the effect of thermal motions of particles of different laser energy levels on the performances of the COIL is included and the velocity distribution function equations are solved by using the double-parameter perturbational method. For a premixed flow, effects of different chemical reaction systems, different gain saturation models and temperature, pressure, yield of excited oxygen, iodine concentration and frequency-shift on the performances of the COIL are computed, and the calculated output power agrees well with the experimental data. The results indicate that the power extraction of the SGK model considering 21 reactions is close to those when only the reversible pumping reaction is considered, while different gain saturation models and adjustable parameters greatly affect the output power, the optimal threshold gain range, and the length of power extraction.
