Rice Storage Proteins:Focus on Composition,Distribution,Genetic Improvement and Effects on Rice Quality

Rice storage proteins(RSPs)are plant proteins with high nutritional quality.As the second largest type of storage substance in rice,it is the main source of protein intake for people who consume rice as a staple food.The content and type of RSPs affect the appearance,processing quality and eating quality of rice.These effects involve the distribution of RSPs in rice grains as well as the interactions of RSPs with other components such as starch in rice grains.In the past two decades,some progress has been made in the genetic improvement of RSPs.However,the determination mechanism of protein content and composition in rice is still unclear,and the mechanism of the effect of RSPs on rice quality has not been elucidated.In this review,the composition,biosynthesis and distribution of RSPs,and quantitative trait loci mapping and cloning of RSP genes are summarized,the research progress of the influence of RSPs and their components on rice quality are reviewed,and the research directions in the future are proposed.

High-temperature electrochemical performance and phase composition of Ti_(0.7) Zr_(0.5) V_(0.2) Mn_(1.8-x)Ni_x hydrogen storage electrode alloys

The rapid development of electric vehicles demands the development of high performance nickel metal hydride battery that is able to endure high temperature. The discharge properties of Ti 0.7 Zr 0.5 V 0.2 Mn 1.8- x Ni x ( x =0.4, 0.8, 1.1, 1.4, 1.7)hydrogen storage alloys was investigated and its phase composition was analyzed using X ray diffraction. The results show that the cycling life was improved as the content of nickel increases. When x =0.4, 0.8, 1.1 and 1.4, the main phase is MgZn 2 type C14 Laves phase and the second one is cubic TiNi phase. When x =1.7, the Laves phase structure disappears. EDAS analysis shows that the increase of nickel content is effective in suppressing the dissolution of vanadium component in alloys. [

Long-Term Frozen Storage Impact on the Antioxidant Capacity and Chemical Composition of Sardinian Myrtle （Myrtus communis L,） Berries

The effects of frozen storage at -18 ℃ up to 6 months, on the antioxidant properties, chemical composition and other physicochemical properties of myrtle berries （Myrtus comrnunis L.） has been evaluated. Berries showed a good resistance to storage decay, and weight loss remained after six months in the 15% range. Results showed that frozen storage up to 6 months affect individual antocyanins content in different ways. Nevertheless the total anthocyanins content was at the end of storage higher than in fresh fruits. The antioxidant capacity calculated with 2,2-diphenyl-l-picrylhidrazyl （DPPH） and 2,2＇-Azino-bis （3-ethylbenzothiazoline-6-sulfonic acid） （ABTS） increased during storage and the calculated r2 showed a positive correlation with the total anthocyanins content. Gluconic and fumaric acid did not changed, quinic acid decreased while malic and shikimic acid increased. The total organic acid content during storage was higher than in fresh fruits causing a slight decrease in pH. Fructose and glucose increased with the same rate and the ratio fructose/glucose remained unchanged （1.06 ± 0.01）, CIE L^＊a^＊b^＊ coordinates showed a shift of the colour to tawny brown after six months storage.

Cluster-based composition rule for Laves phase-related BCC solid solution hydrogen storage alloys

A new cluster line approach for the composition rule of Laves phase-related BCC solid solution hydrogen-storage alloys was presented. The cluster line in a ternary phase diagram refers to a straight composition line linking a specific binary cluster to the third element. In the Laves phase-related BCC solid solution alloy system such as Ti-Cr-V, Ti-Cr tends to form binary Cr2Ti Laves phase while Ti-V and Cr-V to form solid solutions. This Laves phase is characterized by a close-packing icosahedral cluster Cr7Ti6. A cluster line Cr7Ti6-V is then constructed in this system. Alloy rods with a diameter of 3 mm of compositions along this line were prepared by copper-mould suction method. The alloy structure is found to vary with the V contents. Furthermore, the P-C-T measurements indicate that the cluster-line (Cr7Ti6)1-xVx alloys have large hydrogen storage capacities.

Composition Modeling and Equivalence of an Integrated Power Generation System of Wind, Photovoltaic and Energy Storage Unit

利用间接组合建模的方法,在建立典型的双馈风机、光伏发电单元和储能单元的装置级机电暂态模型基础上,采用等值方法建立三者电站级的机电暂态模型,最终通过组合建模得到了风光储联合发电系统的机电暂态模型。在大型电力系统分析软件包的PSD-BPA暂态稳定程序中实现了风光储联合发电系统的仿真功能,通过典型算例和张北＂国家风光储输示范工程＂的仿真分析验证了模型的正确性,为风光储联合发电系统的并网研究提供了分析手段。

Electrospinning-hot pressing technique for the fabrication of thermal and electrical storage membranes and its applications

The combination of electrospinning and hot pressing,namely the electrospinning-hot pressing technique(EHPT),is an efficient and convenient method for preparing nanofibrous composite materials with good energy storage performance.The emerging composite membrane prepared by EHPT,which exhibits the advantages of large surface area,controllable morphology,and compact structure,has attracted immense attention.In this paper,the conduction mechanism of composite membranes in thermal and electrical energy storage and the performance enhancement method based on the fabrication process of EHPT are systematically discussed.Moreover,the state-of-the-art applications of composite membranes in these two fields are introduced.In particular,in the field of thermal energy storage,EHPT-prepared membranes have longitudinal and transverse nanofibers,which generate unique thermal conductivity pathways;also,these nanofibers offer enough space for the filling of functional materials.Moreover,EHPT-prepared membranes are beneficial in thermal management systems,building energy conservation,and electrical energy storage,e.g.,improving the electrochemical properties of the separators as well as their mechanical and thermal stability.The application of electrospinning-hot pressing membranes on capacitors,lithium-ion batteries(LIBs),fuel cells,sodium-ion batteries(SIBs),and hydrogen bromine flow batteries(HBFBs)still requires examination.In the future,EHPT is expected to make the field more exciting through its own technological breakthroughs or be combined with other technologies to produce intelligent materials.

Change in Grain-Size Composition of Lignite under Cyclic Freezing-Thawing and Wetting-Drying

The paper presents the change in grain-size composition of lignite under cyclic freezing-thawing (FTC) and wetting-drying (WDC). The article shows that in the spring and autumn periods the lignites can be subjected to repeated freezing-thawing and wetting-drying, which determines the possibility of changing their grain-size composition and structure. Experimental studies in laboratory conditions on the influence of cyclic freezing-thawing (FTC) and wetting-drying (WDC) on the quality indicators of lignites have been carried out, their granulometric (fractional) composition has been studied. Freezing-thawing cycle conditions are as follows (FTC): minimum exposure temperature: -20°C;maximum: +5°C;relative humidity: 30%;number of processing cycles: 3. Wetting-drying cycles are as follows (WDC): drying temperatures are +20, +40, +60, +80°C, drying time 90 minutes, the coals are further subjected to rain (soaking) for a period of water saturation to humidity of 30% - 40% and dry again. The number of wetting-drying cycles is 3 times. The tests have revealed the destructive effects of FTC and WDC on the samples of lower metamorphic grade coal, and the cycles of wet-dry lead to the much higher yield of fine sizes (-6+0;-13+0 mm) than the cycles of freeze-thaw. Furthermore, it is found that the increase in the yield of fines depends on the heating temperature: coal disintegration proceeds more intensively at a higher temperature of drying.

Self‑Assembly of Binderless MXene Aerogel for Multiple‑Scenario and Responsive Phase Change Composites with Ultrahigh Thermal Energy Storage Density and Exceptional Electromagnetic Interference Shielding

The severe dependence of traditional phase change materials(PCMs)on the temperature-response and lattice deficiencies in versatility cannot satisfy demand for using such materials in complex application scenarios.Here,we introduced metal ions to induce the self-assembly of MXene nanosheets and achieve their ordered arrangement by combining suction filtration and rapid freezing.Subsequently,a series of MXene/K^(+)/paraffin wax(PW)phase change composites(PCCs)were obtained via vacuum impregnation in molten PW.The prepared MXene-based PCCs showed versatile applications from macroscale technologies,successfully transforming solar,electric,and magnetic energy into thermal energy stored as latent heat in the PCCs.Moreover,due to the absence of binder in the MXene-based aerogel,MK3@PW exhibits a prime solar-thermal conversion efficiency(98.4%).Notably,MK3@PW can further convert the collected heat energy into electric energy through thermoelectric equipment and realize favorable solar-thermal-electric conversion(producing 206 mV of voltage with light radiation intensity of 200 mw cm^(−2)).An excellent Joule heat performance(reaching 105℃with an input voltage of 2.5 V)and responsive magnetic-thermal conversion behavior(a charging time of 11.8 s can achieve a thermal insulation effect of 285 s)for contactless thermotherapy were also demonstrated by the MK3@PW.Specifically,as a result of the ordered arrangement of MXene nanosheet self-assembly induced by potassium ions,MK3@PW PCC exhibits a higher electromagnetic shielding efficiency value(57.7 dB)than pure MXene aerogel/PW PCC(29.8 dB)with the same MXene mass.This work presents an opportunity for the multi-scene response and practical application of PCMs that satisfy demand of next-generation multifunctional PCCs.

Ultraviolet‑Irradiated All‑Organic Nanocomposites with Polymer Dots for High‑Temperature Capacitive Energy Storage

Polymer dielectrics capable of operating efficiently at high electric fields and elevated temperatures are urgently demanded by next-generation electronics and electrical power systems.While inorganic fillers have been extensively utilized to improved high-temperature capacitive performance of dielectric polymers,the presence of thermodynamically incompatible organic and inorganic components may lead to concern about the long-term stability and also complicate film processing.Herein,zero-dimensional polymer dots with high electron affinity are introduced into photoactive allyl-containing poly(aryl ether sulfone)to form the all-organic polymer composites for hightemperature capacitive energy storage.Upon ultraviolet irradiation,the crosslinked polymer composites with polymer dots are efficient in suppressing electrical conduction at high electric fields and elevated temperatures,which significantly reduces the high-field energy loss of the composites at 200℃.Accordingly,the ultraviolet-irradiated composite film exhibits a discharged energy density of 4.2 J cm^(−3)at 200℃.Along with outstanding cyclic stability of capacitive performance at 200℃,this work provides a promising class of dielectric materials for robust high-performance all-organic dielectric nanocomposites.

Synergistically constructed lamination-like network of redox-active polyimide and MXene via π-π interactions for aqueous NH_(4)^(+) storage

As a nonmetallic charge carrier,ammonium ion(NH_(4)^(+))has garnered significant attention in the construction of aqueous batteries due to its advantages of low molar mass,small hydration size and rapid diffusion in aqueous solutions.Polymers are a kind of potential electro-active materials for aqueous NH_(4)^(+)storage.However,traditional polymer electrodes are typically created by covering the bulky collectors with excessive additives,which could lead to low volume capacity and unsatisfactory stability.Herein,a nanoparticle-like polyimide(PI)was synthesized and then combined with MXene nanosheets to synergistically construct an additive-free and self-standing PI@MXene composite electrode.Significantly,the redox-active PI nanoparticles are enclosed between conductive MXene flakes to create a 3D lamination-like network that promotes electron transmission,while theπ-πinteractions existing between PI and MXene contribute to the enhanced structural integrity and stability within the composite electrode.As such,it delivers superior aqueous NH_(4)^(+)storage behaviors in terms of a notable specific capacity of 110.7 mA·h·cm^(–3) and a long lifespan with only 0.0064%drop each cycle.Furthermore,in-situ Raman and UV–Vis examinations provide evidence of reversible and stable redox mechanism of the PI@MXene composite electrode during NH_(4)^(+)uptake/removal,highlighting its significance in the area of electrochemical energy storage.

A review of classical hydrogen isotopes storage materials

Hydrogen storage alloys(HSAs)are attracting widespread interest in the nuclear industry because of the generation of stable metal hydrides after tritium absorption,thus effectively preventing the leakage of radioactive tritium.Commonly used HSAs in the hydrogen isotopes field are Zr2M(M=Co,Ni,Fe)alloys,metallic Pd,depleted U,and ZrCo alloy.Specifically,Zr2M(M=Co,Ni,Fe)alloys are considered promising tritium-getter materials,and metallic Pd is utilized to separate and purify hydrogen isotopes.Furthermore,depleted U and ZrCo alloy are well suited for storing and delivering hydrogen isotopes.Notably,all the aforementioned HSAs need to modulate their hydrogen storage properties for complex operating conditions.In this review,we present a comprehensive overview of the reported modification methods applied to the above alloys.Alloying is an effective amelioration method that mainly modulates the properties of HSAs by altering their local geometrical/electronic structures.Besides,microstructural modifications such as nano-sizing and nanopores have been used to increase the specific surface area and active sites of metallic Pd and ZrCo alloys for enhancing de-/hydrogenation kinetics.The combination of metallic Pd with support materials can significantly reduce the cost and enhance the pulverization resistance.Moreover,the poisoning resistance of ZrCo alloy is improved by constructing active surfaces with selective permeability.Overall,the review is constructive for better understanding the properties and mechanisms of hydrogen isotope storage alloys and provides effective guidance for future modification research.

Storage and Preservation of Carica papaya Using Composite Fungicidal Coatings

[Objectives]The paper was to investigate a method for the storage and preservation of Carica papaya utilizing chemical fungicides and composite biological coatings.[Methods]C.papaya fruits with red pulp sourced from Lianjiang were utilized as test materials.The fruit epidermis was subjected to treatment with composite fungicidal coatings at ambient temperature,and the nutritional and physiological indicators of the fruits were measured at regular intervals.[Results]Under ambient temperature conditions,a chemical fungicide composite consisting of 300 mg/L fludioxonil and 250 mg/L propiconazole was employed to soak the fruits for a duration of 2 min.Subsequently,a composite biological coating formulated with 8 g/L KGM and 1.0%Zein at a pH of 7.0 was applied to the fruits.This treatment effectively inhibited the decline in the content of total soluble solids(TSS)and vitamin C(V C)in C.papaya,reduced the weight loss rate and the decay index,and enhanced the yellow ripening index.[Conclusions]This study establishes a foundation for the advancement of additional methods and techniques for the storage and preservation of C.papaya.

Kinetics of color degradation of chestnut kernel during thermal treatment and storage

Thermal treatments are commonly used for disinfesting chestnuts before storage.Color is a first and sensitive quality attribute of chestnuts after thermal treatments and storage.The purpose of this study was to investigate L*and b*values in chestnuts during thermal treatment at 50-70°C for periods varying from 0 to 160 min,and during storage at 3°C for 5 months using a computer vision system(CVS).Results showed that the L*and b*values decreased with increasing temperature,and heating or storage time.The first-order reaction model showed a better fit for the L*and b*values than zero-order reaction model with coefficients of determination(R2)ranging from 0.923 to 0.977 during the thermal treatment and storage.The activation energies of chestnuts were 287.19 and 347.48 kJ/mol during thermal treatments and 89.18 and 78.47 kJ/mol during storage for L*and b*values,respectively,suggesting that the yellowness(b*)was more sensitive to temperature changes than the lightness(L*).According to requirements of L*>50,a potential disinfestation treatment protocol could be developed for chestnuts at 52-62°C.

Sugars, Organic Acids and Total Phenols in Varieties of Chestnut Fruits from Tenerife (Spain)

The sugar, organic and total phenol contents were determined in 21 varieties of chestnut from Tenerife (Spain). Sucrose, fructose and glucose were determined by HPLC/refraction index being the sucrose the sugar with the highest content. The organic acids were determined by HPLC/diode array, and the chestnuts had an organic acids profile characterized by the following compounds: oxalic, glutamic, tartaric, pyruvic, malic, ascorbic, citric, fumaric and cis-aconitic acids. Ascorbic, citric and malic acids were the major organic acids. There were differences in the composition of sugars, total phenols and organic acids between the chestnut varieties. The production zone only significantly affected the contents of moisture, sucrose, total phenols and fructose. The correlations between glucose-fructose, malic acid-fumaric acid, tartaric acid-oxalic acid could be emphasized. An important contribution to the intake of antioxidants is observed for the consumption of chestnuts.

Composition optimization and electrochemical characteristics of Co-free Fe-containing AB_5-type hydrogen storage alloys through uniform design

In order to reduce the cost of ABs-type hydrogen storage alloys, effects of substitution of Ce for La （A side） and Fe, Mn, Al for Ni （B side） on structural and electrochemical properties of （LaCe）;（NiFeMnAl）s alloys were studied systematically. To make component uniform and operation easy, uniform design （UD） method was introduced into the study of composition optimization of Co-free Fe-containing ABs-type alloys for the first time. X-ray diffraction （XRD） results showed that the designed alloys were of single CaCus-type structure phase. The replacement of Fe had a severe effect on electrochemical capacity, and the substitution of Fe and A1 had a synergetic action among the unit cell volume, cycling stability and high rate discharge property. Interestingly, it was found that the hydrogen storage alloys with excessively high plateau pressure showed a tilted line in Nyquist plot instead of the semicircle, and the current decayed rapidly to near zero at the beginning of the step in constant potential step （CPS）, indicating that electrochemical impedance spectra （EIS） and CPS cannot accurately measure the electrochemical kinetics process of the hydrogen storage alloys with excessively high plateau pressure.

Cluster-based composition rules for ternary alloy systems

The cluster-based composition rule in ternary alloy systems including quasicrystals, bulk metallic glasses, crystalline phases and Lave phases-related body-centered cubic (BCC) solid solution forming systems was summarized. The so-called cluster line in a ternary phase diagram refers to a straight composition line linking a specific binary cluster to the third element. The compo- sition ranges of quasicrystals and bulk metallic glasses can be determined by the direct use of cluster lines, where two cluster lines intersect at the optimum phase forming composition. Furthermore, the alloys on the cluster line in Laves phase-related BCC solid solution alloy systems have larger hydrogen storage capacities.

Simulation study of hydrogen sulfide removal in underground gas storage converted from the multilayered sour gas field

A simulation study was carried out to investigate the temporal evolution of H_(2)S in the Huangcaoxia underground gas storage (UGS), which is converted from a depleted sulfur-containing gas field. Based on the rock and fluid properties of the Huangcaoxia gas field, a multilayered model was built. The upper layer Jia-2 contains a high concentration of H_(2)S (27.2 g/m^(3)), and the lower layer Jia-1 contains a low concentration of H_(2)S (14.0 mg/m^(3)). There is also a low-permeability interlayer between Jia-1 and Jia-2. The multi-component fluid characterizations for Jia-1 and Jia-2 were implemented separately using the Peng-Robinson equation of state in order to perform the compositional simulation. The H_(2)S concentration gradually increased in a single cycle and peaked at the end of the production season. The peak H_(2)S concentration in each cycle showed a decreasing trend when the recovery factor (RF) of the gas field was lower than 70%. When the RF was above 70%, the peak H_(2)S concentration increased first and then decreased. A higher reservoir RF, a higher maximum working pressure, and a higher working gas ratio will lead to a higher H_(2)S removal efficiency. Similar to developing multi-layered petroleum fields, the operation of multilayered gas storage can also be divided into multi-layer commingled operation and independent operation for different layers. When the two layers are combined to build the storage, the sweet gas produced from Jia-1 can spontaneously mix with the sour gas produced from Jia-2 within the wellbore, which can significantly reduce the overall H_(2)S concentration in the wellstream. When the working gas volume is set constant, the allocation ratio between the two layers has little effect on the H_(2)S removal. After nine cycles, the produced gas’s H_(2)S concentration can be lowered to 20 mg/m^(3). Our study recommends combining the Jia-2 and Jia-1 layers to build the Huangcaoxia underground gas storage. This plan can quickly reduce the H_(2)S concentration of the produced gas to 20 mg/m^(3), thus meeting the gas export standards as well as the HSE (Health, Safety, and Environment) requirements in the field. This study helps the engineers understand the H_(2)S removal for sulfur-containing UGS as well as provides technical guidelines for converting other multilayered sour gas fields into underground storage sites.

Melatonin maintains the storage quality of fresh-cut Chinese water chestnuts by regulating phenolic and reactive oxygen species metabolism

Fresh-cut Chinese water chestnuts(CWCs)are prone to quality deterioration during storage,which does not meet consumer demand.In this study,the effect of exogenous melatonin(5 mmol·L^(-1))on the quality and potential mechanisms in fresh-cut CWC was investigated.The results showed that melatonin treatment alleviated the cut-surface discoloration of CWCs.Not only did this treatment significantly slow down the in-crease in browning degree and yellowness(b*)as well as the decrease in lightness(L*),but it also significantly delayed the loss of weight and total soluble solids.Further investigations indicated that melatonin-treated fresh-cut CWCs exhibited significantly lower total phenolics and soluble quinones and suppressed the activities of phenylalanine ammonia-lyase,polyphenol oxidase,and peroxidase.Meanwhile,when fresh-cut CWCs were treated with melatonin,the total flavonoid concentration was significantly decreased compared to the control.Ad ditionally,melatonin significantly inhibited the accumulation of H_(2)O_(2)and malondialdehyde as well as enhanced the activities of superoxide dismutase and catalase by promoting the production of O_(2)^(-·).In summary,melatonin treatment may delay the surface discoloration of fresh-cut CWCs by inhibiting phenolic compound metabolism and improving antioxidant capacity,thereby effectively maintaining the quality and prolonging the shelf life of fresh-cut CWCs.

Bayesian Optimization for Field-Scale Geological Carbon Storage

We present a framework that couples a high-fidelity compositional reservoir simulator with Bayesian optimization(BO)for injection well scheduling optimization in geological carbon sequestration.This work represents one of the first at tempts to apply BO and high-fidelity physics models to geological carbon storage.The implicit parallel accurate reservoir simulator(IPARS)is utilized to accurately capture the underlying physical processes during CO_(2)sequestration.IPARS provides a framework for several flow and mechanics models and thus supports both stand-alone and coupled simulations.In this work,we use the compositional flow module to simulate the geological carbon storage process.The compositional flow model,which includes a hysteretic three-phase relative permeability model,accounts for three major CO_(2)trapping mechanisms:structural trapping,residual gas trapping,and solubility trapping.Furthermore,IPARS is coupled to the International Business Machines(IBM)Corporation Bayesian Optimization Accelerator(BOA)for parallel optimizations of CO_(2)injection strategies during field-scale CO_(2)sequestration.BO builds a probabilistic surrogate for the objective function using a Bayesian machine learning algorithm-the Gaussian process regression,and then uses an acquisition function that leverages the uncertainty in the surrogate to decide where to sample.The IBM BOA addresses the three weaknesses of standard BO that limits its scalability in that IBM BOA supports parallel(batch)executions,scales better for high-dimensional problems,and is more robust to initializations.We demonstrate these merits by applying the algorithm in the optimization of the CO_(2)injection schedule in the Cranfield site in Mississippi,USA,using field data.The optimized injection schedule achieves 16%more gas storage volume and 56%less water/surfactant usage compared with the baseline.The performance of BO is compared with that of a genetic algorithm(GA)and a covariance matrix adaptation(CMA)-evolution strategy(ES).The results demonstrate the superior performance of BO,in that it achieves a competitive objective function value with over 60%fewer forward model evaluations.

Factors aff ecting lipid and fatty acid composition of Calanus sinicus in the Yellow Sea and the East China Sea in spring

The factors aff ecting lipid and fatty acid composition of copepod Calanus sinicus in the Yellow Sea(YS)and the East China Sea(ECS)were examined in this study.In spring,there were signifi cant diff erences between these two regions for both environmental conditions and food availability.Such regional diff erence signifi cantly infl uenced the lipid and fatty acid profi les of C.sinicus.Our results show that C.sinicus has a higher lipids content in ECS,especially for wax ester and triglyceride lipids,indicating a more active and effi cient predation.According to BIO-ENV analysis,the variation of lipids profi les may be infl uenced majorly by water temperature.Moreover,the fatty acids(FAs)profi les of C.sinicus were also diff erent between YS and ECS,especially in the four major contributors,C22꞉1ω11,eicosapentaenoic acid(EPA),docosahexenoic acid(DHA),and C20꞉1ω9.The considerable amounts of self-biosynthesized FAs of herbivorous copepod(C22꞉1ω11 and C20꞉1ω9)and low DHA/EPA ratio may indicate that C.sinicus in ECS feed mainly on phytoplankton comparing to those in YS.The fatty acid profi les of C.sinicus were aff ected by the diff erences in food availability.