Transverse cracks occur usually in repair welding for thick plate of high strength steel. It needs multiple times of repair welding. The quality of production and deliver deadline will be influenced. Therefore, it is ...Transverse cracks occur usually in repair welding for thick plate of high strength steel. It needs multiple times of repair welding. The quality of production and deliver deadline will be influenced. Therefore, it is very significant to investigate the cause and control of transverse crack in repair welding. In this paper, both ends restraint crack experiment is developed to produce delay transverse crack for high strength steel. Metallographic results show that four types of cracks are found in repair welding metal zone and heat affected zone. Large chevron transverse cracks are found in repair welding zone. Lots of micro transverse cracks are found in inter-layer repair welding metal zone, root HAZ and two ends of repair welding individually. The distribution character and formation mechanism of the transverse crack are further analyzed through hardness testing and residual stress measurement.展开更多
通过脆性岩石试样巴西圆盘试验研究了疲劳效应对脆性岩石断裂韧度KIC的影响,阐释了脆性岩石的疲劳损伤机制,首次展示了脆性岩石破坏前宏观裂纹的张开和闭合行为。巴西圆盘试验结果表明,循环荷载作用下,脆性岩样的KIC降低了35%,巴西劈裂...通过脆性岩石试样巴西圆盘试验研究了疲劳效应对脆性岩石断裂韧度KIC的影响,阐释了脆性岩石的疲劳损伤机制,首次展示了脆性岩石破坏前宏观裂纹的张开和闭合行为。巴西圆盘试验结果表明,循环荷载作用下,脆性岩样的KIC降低了35%,巴西劈裂拉伸强度降低了30%。通过高速相机数小时的观测并记录到了岩石力学领域从未观测到的过程,即脆性岩样破坏前,疲劳裂纹在正弦荷载作用下弹性张合。扫描电镜和计算机断层扫描结果显示,巴西圆盘和V形切槽巴西圆盘试样的破坏是由断裂过程区(fracture process zone,简称FPZ)引起的,FPZ中包含许多异于循环荷载作用下单条宏观裂纹的微裂纹,切槽裂纹尖端FPZ的形成导致未破坏脆性岩样中可视疲劳裂纹弹性张合。室内试验和数值计算结果表明,切槽裂纹倾角为60°时获得最大FPZ(即FPZmax),这表明最大FPZ的形成可能与Ⅰ-Ⅱ型(拉伸和剪切)组合加载模式有关。展开更多
基金Tbis research is supported by National Science Foundation （No. 51105252） and by Harbin Creative Talent Tec, hnology Foundation （No. 2010RFQXGO05） and by Heilongjiang Province Education Foundation （No. 20100503066）.
文摘Transverse cracks occur usually in repair welding for thick plate of high strength steel. It needs multiple times of repair welding. The quality of production and deliver deadline will be influenced. Therefore, it is very significant to investigate the cause and control of transverse crack in repair welding. In this paper, both ends restraint crack experiment is developed to produce delay transverse crack for high strength steel. Metallographic results show that four types of cracks are found in repair welding metal zone and heat affected zone. Large chevron transverse cracks are found in repair welding zone. Lots of micro transverse cracks are found in inter-layer repair welding metal zone, root HAZ and two ends of repair welding individually. The distribution character and formation mechanism of the transverse crack are further analyzed through hardness testing and residual stress measurement.
文摘通过脆性岩石试样巴西圆盘试验研究了疲劳效应对脆性岩石断裂韧度KIC的影响,阐释了脆性岩石的疲劳损伤机制,首次展示了脆性岩石破坏前宏观裂纹的张开和闭合行为。巴西圆盘试验结果表明,循环荷载作用下,脆性岩样的KIC降低了35%,巴西劈裂拉伸强度降低了30%。通过高速相机数小时的观测并记录到了岩石力学领域从未观测到的过程,即脆性岩样破坏前,疲劳裂纹在正弦荷载作用下弹性张合。扫描电镜和计算机断层扫描结果显示,巴西圆盘和V形切槽巴西圆盘试样的破坏是由断裂过程区(fracture process zone,简称FPZ)引起的,FPZ中包含许多异于循环荷载作用下单条宏观裂纹的微裂纹,切槽裂纹尖端FPZ的形成导致未破坏脆性岩样中可视疲劳裂纹弹性张合。室内试验和数值计算结果表明,切槽裂纹倾角为60°时获得最大FPZ(即FPZmax),这表明最大FPZ的形成可能与Ⅰ-Ⅱ型(拉伸和剪切)组合加载模式有关。
