The physics package of a chip-scale atomic clock （CSAC） has been successfully realized by integrating vertical cavity surface emitting laser （VCSEL）, neutral density （ND） filter, λ/4 wave plate, 87Rb vapor cell...The physics package of a chip-scale atomic clock （CSAC） has been successfully realized by integrating vertical cavity surface emitting laser （VCSEL）, neutral density （ND） filter, λ/4 wave plate, 87Rb vapor cell, photodiode （PD）, and magnetic coil into a cuboid metal package with a volume of about 2.8 cm3. In this physics package, the critical component, 87Rb vapor cell, is batch-fabricated based on MEMS technology and in-situ chemical reaction method. Pt heater and thermistors are integrated in the physics package. A PTFE pillar is used to support the optical elements in the physics package, in order to reduce the power dissipation. The optical absorption spectrum of 87Rb D1 line and the microwave frequency correction signal are successfully observed while connecting the package with the servo circuit system. Using the above mentioned packaging solution, a CSAC with short-term frequency stability of about 7 × 10^-10τ-1/2 has been successfully achieved, which demonstrates that this physics package would become one promising solution for the CSAC.展开更多
Research on chip-scale atomic clocks （CSACs） based on coherent population trapping （CPT） is reviewed. The back- ground and the inspiration for the research are described, including the important schemes proposed t...Research on chip-scale atomic clocks （CSACs） based on coherent population trapping （CPT） is reviewed. The back- ground and the inspiration for the research are described, including the important schemes proposed to improve the CPT signal quality, the selection of atoms and buffer gases, and the development of micro-cell fabrication. With regard to the re- liability, stability, and service life of the CSACs, the research regarding the sensitivity of the CPT resonance to temperature and laser power changes is also reviewed, as well as the CPT resonance＇s collision and light of frequency shifts. The first generation CSACs have already been developed but its characters are still far from our expectations. Our conclusion is that miniaturization and power reduction are the most important aspects calling for further research.展开更多
We describe the microfabrication of ^85Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions...We describe the microfabrication of ^85Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions, the pure metallic Rb drops and buffer gases were obtained in the cells with a few mm^3 internal volumes during the cell sealing process. At an ambient temperature of 90 ℃ the optical absorption resonance of ^85Rb D1 transition with proper broadening and the corresponding coherent population trapping （CPT） resonance, with a signal contrast of 1.5% and linewidth of about 1.7 kHz, have been detected. The sealing quality and the stability of the cells have also been demonstrated experimentally by using the helium leaking detection and the after-9-month optoelectronics measurement which shows a similar CPT signal as its original status. In addition, the physics package of chip-scale atomic clock （CSAC） based on the cell was realized. The measured frequency stability of the physics package can reach to 2.1 × 10^-10 at one second when the cell was heated to 100 ℃ which proved that the cell has the quality to be used in portable and battery-operated devices.展开更多
基金supported by the Knowledge Innovation Project of Chinese Academy of Sciences(Grant No.KGCX2-YW-143)
文摘The physics package of a chip-scale atomic clock （CSAC） has been successfully realized by integrating vertical cavity surface emitting laser （VCSEL）, neutral density （ND） filter, λ/4 wave plate, 87Rb vapor cell, photodiode （PD）, and magnetic coil into a cuboid metal package with a volume of about 2.8 cm3. In this physics package, the critical component, 87Rb vapor cell, is batch-fabricated based on MEMS technology and in-situ chemical reaction method. Pt heater and thermistors are integrated in the physics package. A PTFE pillar is used to support the optical elements in the physics package, in order to reduce the power dissipation. The optical absorption spectrum of 87Rb D1 line and the microwave frequency correction signal are successfully observed while connecting the package with the servo circuit system. Using the above mentioned packaging solution, a CSAC with short-term frequency stability of about 7 × 10^-10τ-1/2 has been successfully achieved, which demonstrates that this physics package would become one promising solution for the CSAC.
基金Project support by the National Natural Science Foundation of China(Grant No.11074012)
文摘Research on chip-scale atomic clocks （CSACs） based on coherent population trapping （CPT） is reviewed. The back- ground and the inspiration for the research are described, including the important schemes proposed to improve the CPT signal quality, the selection of atoms and buffer gases, and the development of micro-cell fabrication. With regard to the re- liability, stability, and service life of the CSACs, the research regarding the sensitivity of the CPT resonance to temperature and laser power changes is also reviewed, as well as the CPT resonance＇s collision and light of frequency shifts. The first generation CSACs have already been developed but its characters are still far from our expectations. Our conclusion is that miniaturization and power reduction are the most important aspects calling for further research.
基金Project supported by National 863/973 Plans Projects (Grant Nos. 2006AA04Z361,2006CB932402)NSFC (Grant No. 60971002)
文摘We describe the microfabrication of ^85Rb vapour cells using a glass-silicon anodic bonding technique and in situ chemical reaction between rubidium chloride and barium azide to produce Rb. Under controlled conditions, the pure metallic Rb drops and buffer gases were obtained in the cells with a few mm^3 internal volumes during the cell sealing process. At an ambient temperature of 90 ℃ the optical absorption resonance of ^85Rb D1 transition with proper broadening and the corresponding coherent population trapping （CPT） resonance, with a signal contrast of 1.5% and linewidth of about 1.7 kHz, have been detected. The sealing quality and the stability of the cells have also been demonstrated experimentally by using the helium leaking detection and the after-9-month optoelectronics measurement which shows a similar CPT signal as its original status. In addition, the physics package of chip-scale atomic clock （CSAC） based on the cell was realized. The measured frequency stability of the physics package can reach to 2.1 × 10^-10 at one second when the cell was heated to 100 ℃ which proved that the cell has the quality to be used in portable and battery-operated devices.
文摘报道了自行研制的894 nm高温垂直腔面发射激光器(VCSEL)以及基于此类器件的芯片级铯原子钟系统的应用实验结果.根据芯片级铯原子钟对VCSEL在特定高温环境下产生894.6 nm线偏振激光的要求,对器件的量子阱增益及腔模位置等材料结构参数进行了优化,确定增益-腔模失谐量为-15 nm,使器件的基本性能在高温环境下保持稳定.研制的VCSEL器件指标为:20—90?C温度范围内阈值电流保持在0.20—0.23 m A,0.5 m A工作电流下输出功率>0.1 mW;85.6?C温度环境下激光波长894.6 nm,偏振选择比59.8:1;采用所研制的VCSEL与铯原子作用,获得了芯片级铯原子钟实施激光频率稳频的吸收谱线和实施微波频率稳频的相干布居囚禁谱线.
