Preparation and characterization of β-cyclodextrin grafted N-maleoyl chitosan nanoparticles for drug delivery

β-cyclodextrin (CD) grafted N-maleoyl chitosan (CD-g-NMCS) with two different degrees of substitution (DS) of N-maleoyl (DS = 21.2% and 30.5%) were synthesized from maleic anhydride and chitosan bearing pendant cyclodextrin (CD-g-CS). CD-g-NMCS based nanoparticles were prepared via an ionic gelation method together with chitosan and CD-g-CS nanoparticles.The size and zeta potential of prepared CD-g-NMCS nanoparticles were 179.2~274.0 nm and 36.2~42.4 m V, respectively. In vitro stability test indicated that CD-g-NMCS nanoparticles were more stable in phosphate-buffered saline compared with chitosan nanoparticles. Moreover, a poorly water-soluble drug, ketoprofen (KTP), was selected as a model drug to study the obtained nanoparticle’s potentials as drug delivery carriers. The drug loading efficiency of CD-g-NMCS20 nanoparticles were 14.8% for KTP. MTT assay showed that KTP loaded CD-g-NMCS nanoparticles were safe drug carriers. Notably, in vitro drug release studies showed that KTP was released in a sustained-release manner for the nanoparticles. The pharmacokinetic of drug loaded CD-g-NMCS20 nanoparticles were evaluated in rats after intravenous administration. The results of studies revealed that, compared with free KTP, KTP loaded CD-g-NMCS20 nanoparticles exhibited a significant increase in AUC0→24h and mean residence time by 6.6-fold and 2.9-fold, respectively. Therefore, CD-g-NMCS nanoparticles could be used as a novel promising nanoparticle-based drug delivery system for sustained release of poorly water-soluble drugs. The carboxylic acid groups of the CD-g-NMCS molecule provide convenient sites for further structural modifications including introduction of tissue-or disease-specific targeting groups.

Preparation and Evaluation of Insulin-loaded Nanoparticles based on Hydroxypropyl-β-cyclodextrin Modified Carboxymethyl Chitosan for Oral Delivery

Novel insulin-loaded nanoparticles based on hydroxypropyl-β-cyclodextrin modified carboxymethyl chitosan（CMC-HP-β-CD） were prepared to improve the oral bioavailability of insulin. The CMC-HP-β-CD was characterized by FT-IR spectroscopy and 1H-NMR spectra. The insulin-loaded nanoparticles were prepared through crosslinking with calcium ions, and the morphology and size of the prepared nanoparticles were characterized by transmission electron microscopy（TEM） and dynamic light scattering（DLS）. Cumulative release in vitro study was performed respectively in simulated gastric medium fluid（SGF, p H=1.2）, simulated intestinal fluid（SIF, p H=6.8） and simulated colonic fluid（SCF, p H=7.4）. The encapsulation efficiency of insulin was up to 87.14 ± 4.32% through high-performance liquid chromatography（HPLC）. Statistics indicated that only 15% of the encapsulated insulin was released from the CMC-HP-β-CD nanoparticles in 36 h in SGF, and about 50% of the insulin could be released from the nanoparticles in SIF, whereas more than 80% was released in SCF. In addition, the solution containing insulin nanoparticles could effectively reduce the blood glucose level of diabetic mice. The cytotoxicity test showed that the samples had no cytotoxicity. CMC-HP-β-CD nanoparticles are promising candidates as potential carriers in oral insulin delivery systems.

Synthesis of Novel Chitosan Microspheres Grafted with β-Cyclodextrins and Their Adsorption for Iodine for Antibacterial Activities

The novel chitosan microspheres grafted with beta-cyclodextrins (CMGC) wereprepared by means of the reaction of chitosan microspheres and mono-(6-p-tosyl)- beta-cyclodextrins(beta-CD-OTs-6). beta-CD-OTs-6 were gained by the reaction of p-toluenesul-fonyl chloride (TsCl) andbeta-cyclodextrins (beta-CDs). Their structures were proved by Fourier transform infrared spectralanalysis (FT-IR), X ray powder diffraction analysis, and ^(13)C NMR; the configuration of CMGC wascharacterized by scanning electron micrograph (SEM) and transmittance electron micrograph (TEM). Theinclusion complex of CMGC with iodine was prepared and its inclusion ability was studied. Theexperimental results showed that some iodine was included with CMGC and formed a stable inclusion.The stable complex of CMGC and iodine (CMGC-1) shows good antibacterial effect.

Chitosan and β-cyclodextrin Microspheres as Pulmonary Sustained Delivery Systems

Chitosan and β-cyclodextrin were used to prepare microspheres with theophylline for pulmonary delivery by spray drying method. The characteristics, mucociliotoxicity, permeation rate and drug release were studied. The drug entrapments of microspheres Ⅰ, Ⅱ and Ⅲ were from 35.70% to 21.09% and 13.33%, while yields and encapsulation efficiencies were higher than 45% and about 90% respectively. The microspheres possessed low tap densities （0.34-0.48 g/cm^3）, appropriate diameters （3.35-3.94 μm） and theoretical aerodynamics diameters （2.20-3.04 μm）. SEM images showed the microspheres were spherical with smooth or wrinkled surface surfaces. FT-IR demonstrated theophylline had formed hydrogen bonds with chitosan and fl-cyclodextrin. The microspheres could effectively reduce the ciliotoxicity and easy to penetrate the memberine. The in vitro release of the microspheres was related to the ratio of drug/polymer and microspheres Ⅱ had a prolong release, providing the release of 72.00% in 12 h. The results suggestes that chitosan/β-cyclodextrin microspheres Ⅱ are a promising carrier as sustained release for pulmonary delivery.

Preparation of a Cyclomaltoheptaose(β-cyclodextrin) Cross-linked Chitosan Derivative via Glyoxal or Glutaraldehyde

A cyclomaltoheptaose--cyclodextrin (-CD) crosslinked chitosan derivative via glyoxal or glutaraldehyde was prepared. The structures of -CD crosslined chitosan with glyoxal or glutaraldehyde were characterized by IR spectra. The surface morphology of the -CD crosslinked chitosan particles was examined using a scanning electron microscope. The immobilization capacity of ?CD on chitosan was affected on the weight ratio of -CD/chitosan, the utilization amount of crosslinking agent, the acidity of the reaction system and the temperature. The adsorption for nicotine indicated that the chitosan--CD was a good adsorbent.

Studies on The Adsorption Capacity for Bilirubin of The Adsorbent Chitosan-β-Cyclodextrin

The adsorbent crosslinked chitosan-β-cyclodextrin (β-CD) was prepared by the reaction of glutaraldehyde with chitosan and β-cyclodextrin. This type of adsorbent has high adsorption capacity for unconjugated bilirubin. The adsorption capacity was related to the β-CD content of the adsorbent; phosphate buffer concentration; temperature; pH value; ionic strength and the adsorbent beads. The results indicated that the chitosan-β-CD was a good adsorbent for unconjugated bilirubin with high capacity.

Activation of endogenous neurogenesis and angiogenesis by basic fibroblast growth factor-chitosan gel in an adult rat model of ischemic stroke

Attempts have been made to use cell transplantation and biomaterials to promote cell proliferation,differentiation,migration,and survival,as well as angiogenesis,in the context of brain injury.However,whether bioactive materials can repair the damage caused by ischemic stroke by activating endogenous neurogenesis and angiogenesis is still unknown.In this study,we applied chitosan gel loaded with basic fibroblast growth factor to the stroke cavity 7 days after ischemic stroke in rats.The gel slowly released basic fibroblast growth factor,which improved the local microenvironment,activated endogenous neural stem/progenitor cells,and recruited these cells to migrate toward the penumbra and stroke cavity and subsequently differentiate into neurons,while enhancing angiogenesis in the penumbra and stroke cavity and ultimately leading to partial functional recovery.This study revealed the mechanism by which bioactive materials repair ischemic strokes,thus providing a new strategy for the clinical application of bioactive materials in the treatment of ischemic stroke.

Chitosan-based triboelectric materials for self-powered sensing at high temperatures

Although biopolymers have been widely utilized as triboelectric materials for the construction of self-powered sensing systems,the annihilation of triboelectric charges at high temperatures restricts the output signals and sensitivity of the assembled sensors.Herein,a novel chitosan/montmorillonite/lignin(CML)composite film was designed and employed as a tribopositive layer in the assembly of a self-powered sensing system for use under hot conditions(25-70℃).The dense contact surface resulting from the strong intermolecular interaction between biopolymers and nanofillers restrained the volatilization of induced electrons.The optimized CML-TENG delivered the highest open-circuit voltage(V_(oc))of 262 V and maximum instantaneous output power of 429 mW/m^(2).Pristine CH-TENG retained only 39%of its initial Voc at 70℃,whereas the optimized CM_(5)L_(3)-TENG retained 66%of its initial Voc.Our work provides a new strategy for suppressing the annihilation of triboelectric charges at high temperatures,thus boosting the development of self-powered sensing devices for application under hot conditions.

Effects of theophylline/chitosan/β-cyclodextrin microspheres for oral drug delivery on an asthmatic rat model

Objective:This study aimed to investigate the effects of TH/CTS/β-CD microspheres by oral administration on ovalbumin allergic asthma of a rat model.Methods:Spray drying method was applied for preparing the TH/CTS/β-CD microspheres,which were used in treatment of asthmatic rats.At a predetermined time,the levels of eosinophil(Eos),protein,lactate dehydrogenase(LDH),aspartate transaminase(AST),glutamic pyruvic transaminase(GPT),and creatinine(Cr)were ascertained by automatic hematology and biochemical analyzers.Lung tissue histology was performed by hematoxylin-eosin staining.Results:No significant differences were found about the contents of Eos in the blood,and the contents of Eos,protein and LDH in the bronchoalveolar lavage fluid between the microsphere-treated and dexamethasone-treated groups,but the levels were lower in both treated groups than in the model group.In the microsphere-treated group,the levels of Cr,AST,and GPT in the serum of rats showed no significant differences compared with the normal group.Based on lung histopathological findings,the microspheres attenuated inflammatory cell infiltration and mucus hypersecretion compared with the model group.Conclusion:This study demonstrated that TH/CTS/β-CD microspheres exerted an anti-inflammatory effect and could serve as a novel promising drug delivery system for asthma treatment.

Glycine-β-cyclodextrin-assisted cometabolism of phenanthrene and pyrene by Pseudomonas stutzeri DJP 1 from marine sediment

Cometabolic degradation is currently an effective and extensively way to remove high molecular weight polycyclic aromatic hydrocarbons(HMW-PAHs).Unfortunately,due to low bio-accessibility and high biotoxicity,the cometabolic degradation rate of HMW-PAHs is limited.Glycine-β-cyclodextrin(GCD)was obtained through amino modification ofβ-cyclodextrin(BCD)and added to cometabolic system of phenanthrene(PHE)and pyrene(PYR)to assist PYR biodegradation.Results show that the addition of GCD(100 mg/L)effectively improved the removal rate of PYR(20 mg/L)by 42.3%.GCD appeared to increase the bio-accessibility and reduce the biotoxicity of PHE and PYR,and then promoted the growth of Pseudomonas stutzeri DJP1 and stimulated the elevation of dehydrogenase(DHA)and catechol 12 dioxygenase(C12O)activities.The phthalate metabolic pathway was accelerated,which improved the cometabolic degradation.This study provided a new reference for the cometabolic degradation of HMW-PAHs.

Synthesis of chitosan oligosaccharide selenium and its antitumor activity

Background:Polysaccharides have various biological activities;the complexation of polysaccharides with trace element ions can produce synergistic effects,improving the original biological activities of sugars and trace elements.Methods:The preparation process of chitosan oligosaccharide selenium(COSSe)was optimized by the response surface method,followed by a detailed analysis of the resultant compound’s characteristics.The anti-cancer activity of COSSe was studied using the human ovarian cancer cell line SKOV3 as a cell model.Results:The prepared COSSe response surface was well predicted,indicating successful chitosan oligosaccharide binding with selenium.Response surface method analyses identified the optimal synthesis conditions for COSSe:the reaction time of 5.08 h,the reaction temperature of 71.8°C,and mass ratio(Na2SeO3:chitosan oligosaccharide)of 1.02.Under the optimal conditions,the final product,the selenium content,reached 1.302%.The results of cell experiments showed that COSSe significantly inhibited SKOV3 proliferation in a concentration-dependent manner.RNA-seq results showed that chitosan oligosaccharide and COSSe significantly modulated the expression of genes’DNA metabolic processes and cell cycle in SKOV3 cells.Gene enrichment analysis showed the inhibition of the cell cycle,and the results of flow cytometry showed that SKOV3 cells increased in the S phase and decreased in the G2/M phase,with a noted suppression in the protein expression of cyclin-dependent kinase 2(CDK2)and cyclin A1(CCNA1).Conclusion:COSSe has a stronger effect than chitosan oligosaccharide,leading to the arrest of the cell cycle in the S phase.Thus,COSSe may be an effective candidate for the treatment of ovarian cancer.

Morphological Evolution of Self-Assembled Sodium Dodecyl Sulfate/Dodecyltrimethylammonium Bromide@Epoxy-β-Cyclodextrin Supramolecular Aggregates Induced by Temperature

Bio-based cyclodextrins(CDs)are a common research object in supramolecular chemistry.The special cavity structure of CDs can form supramolecular self-assemblies such as vesicles and microcrystals through weak interaction with guest molecules.The different forms of supramolecular self-assemblies can be transformed into each other under certain conditions.The regulation of supramolecular self-assembly is not only helpful to understand the self-assembly principle,but also beneficial to its application.In the present study,the self-assembly behavior of epoxy-β-cyclodextrin(EP-β-CD)and mixed anionic and cationic surfactant system(sodium dodecyl sulfate/dodecyltrimethylammonium bromide,SDS/DTAB)in aqueous solution was studied.Morphological and particle size characterization found that the SDS/DTAB@EP-β-CD complex,as the basic building unit,self-assembled into worm-like micelles at lower temperatures and vesicles at higher temperatures.Nuclear magnetic resonance(NMR)and Fourier transform infrared spectroscopy(FT-IR)analysis revealed that the driving force for the formation of vesicles and worm-like micelles was the hydrogen bonds between EP-β-CD molecules,while water molecules played an important role in promoting vesicle formation between SDS/DTAB@EP-β-CD units.Herein,the mechanism of the morphologic transformation of SDS/DTAB@EP-β-CD supramolecular aggregates induced by temperature was elucidated by exploring the self-assembly process,which may provide an excellent basis for the development of delivery carriers.

Constructing a biofunctionalized 3D-printed gelatin/sodium alginate/chitosan tri-polymer complex scaffold with improvised biological andmechanical properties for bone-tissue engineering

Sodium alginate(SA)/chitosan(CH)polyelectrolyte scaffold is a suitable substrate for tissue-engineering application.The present study deals with further improvement in the tensile strength and biological properties of this type of scaffold to make it a potential template for bone-tissue regeneration.We experimented with adding 0%–15%(volume fraction)gelatin(GE),a protein-based biopolymer known to promote cell adhesion,proliferation,and differentiation.The resulting tri-polymer complex was used as bioink to fabricate SA/CH/GEmatrices by three-dimensional(3D)printing.Morphological studies using scanning electron microscopy revealed the microfibrous porous architecture of all the structures,which had a pore size range of 383–419μm.X-ray diffraction and Fourier-transform infrared spectroscopy analyses revealed the amorphous nature of the scaffold and the strong electrostatic interactions among the functional groups of the polymers,thereby forming polyelectrolyte complexes which were found to improve mechanical properties and structural stability.The scaffolds exhibited a desirable degradation rate,controlled swelling,and hydrophilic characteristics which are favorable for bone-tissue engineering.The tensile strength improved from(386±15)to(693±15)kPa due to the increased stiffness of SA/CH scaffolds upon addition of gelatin.The enhanced protein adsorption and in vitro bioactivity(forming an apatite layer)confirmed the ability of the SA/CH/GE scaffold to offer higher cellular adhesion and a bone-like environment to cells during the process of tissue regeneration.In vitro biological evaluation including the MTT assay,confocal microscopy analysis,and alizarin red S assay showed a significant increase in cell attachment,cell viability,and cell proliferation,which further improved biomineralization over the scaffold surface.In addition,SA/CH containing 15%gelatin designated as SA/CH/GE15 showed superior performance to the other fabricated 3D structures,demonstrating its potential for use in bone-tissue engineering.

Chitosan/Sodium Alginate Multilayer pH-Sensitive Films Based on Layer-by-Layer Self-Assembly for Intelligent Packaging

The abuse of plastic food packaging has brought about severe white pollution issues around the world.Developing green and sustainable biomass packaging is an effective way to solve this problem.Hence,a chitosan/sodium alginate-based multilayer film is fabricated via a layer-by-layer(LBL)self-assembly method.With the help of superior interaction between the layers,the multilayer film possesses excellent mechanical properties(with a tensile strength of 50 MPa).Besides,the film displays outstanding water retention property(blocking moisture of 97.56%)and ultraviolet blocking property.Anthocyanin is introduced into the film to detect the food quality since it is one natural plant polyphenol that is sensitive to the pH changes ranging from 1 to 13 in food when spoilage occurs.It is noted that the film is also bacteriostatic which is desired for food packaging.This study describes a simple technique for the development of advanced multifunctional and fully biodegradable food packaging film and it is a sustainable alternative to plastic packaging.

Chitosan-based thermosensitive hydrogel with long-term release of murine nerve growth factor for neurotrophic keratopathy

Neurotrophic keratopathy is a persistent defect of the corneal epithelium,with or without stromal ulceration,due to corneal nerve deficiency caused by a variety of etiologies.The treatment options for neurotrophic keratopathy are limited.In this study,an ophthalmic solution was constructed from a chitosan-based thermosensitive hydrogel with long-term release of murine nerve growth factor(CTH-mNGF).Its effectiveness was evaluated in corneal denervation(CD)mice and patients with neurotrophic keratopathy.In the preclinical setting,CTH-mNGF was assessed in a murine corneal denervation model.CTH-mNGF was transparent,thermosensitive,and ensured sustained release of mNGF for over 20 hours on the ocular surface,maintaining the local mNGF concentration around 1300 pg/mL in vivo.Corneal denervation mice treated with CTH-mNGF for 10 days showed a significant increase in corneal nerve area and total corneal nerve length compared with non-treated and CTH treated mice.A subsequent clinical trial of CTH-mNGF was conducted in patients with stage 2 or 3 neurotrophic keratopathy.Patients received topical CTH-mNGF twice daily for 8 weeks.Fluorescein sodium images,Schirmer’s test,intraocular pressure,Cochet-Bonnet corneal perception test,and best corrected visual acuity were evaluated.In total,six patients(total of seven eyes)diagnosed with neurotrophic keratopathy were enrolled.After 8 weeks of CTH-mNGF treatment,all participants showed a decreased area of corneal epithelial defect,as stained by fluorescence.Overall,six out of seven eyes had fluorescence staining scores<5.Moreover,best corrected visual acuity,intraocular pressure,Schirmer’s test and Cochet-Bonnet corneal perception test results showed no significant improvement.An increase in corneal nerve density was observed by in vivo confocal microscopy after 8 weeks of CTH-mNGF treatment in three out of seven eyes.This study demonstrates that CTH-mNGF is transparent,thermosensitive,and has sustained-release properties.Its effectiveness in healing corneal epithelial defects in all eyes with neurotrophic keratopathy suggests CTH-mNGF has promising application prospects in the treatment of neurotrophic keratopathy,being convenient and cost effective.

Smart Colorimetric Corn Starch Films Combined with Anthocyanin-Loaded Glutenin-Carboxymethyl Chitosan Nanocomplexes for Freshness Monitoring of Chilled Pork

In this study,intelligent,pH-responsive colorimetric films were prepared by encapsulating anthocyanins in nanocomplexes prepared from glutenin and carboxymethyl chitosan.These nanocomplexes were added to a corn starch matrix and used in the freshness monitoring of chilled pork.The effects of anthocyanin-loaded nanocomplexes on the physical,structural,and functional characteristics of the films were investigated.The addition of anthocyanin-loaded nanocomplexes increased the tensile strength,elongation at break,hydrophobicity,and light transmittance of the films while decreasing their water vapor permeability.This is because new hydrogen bonds are formed between the film components,resulting in a more homogeneous and dense structure.The colorimetric film has a significant color response to pH changes.These films were used in experiments on the freshness of chilled pork,in which the pH changes with changing freshness states.The results show that the colorimetric film can monitor changes in the freshness of chilled pork in real time,where orange,pink,and green represent the fresh,secondary fresh,and putrefied states of pork,respectively.Therefore,the intelligent colorimetric film developed in this study has good application potential in the food industry.

Adding chitosan nanoparticles of green tea extract in diluent and thawing temperatures ameliorate the post-thawed quality of Boer buck semen

Objective:To improve the quality of post-thawing Boer buck semen for artificial insemination by adding green tea extract chitosan nanoparticles to skimmed egg yolk diluent,and the proper thawing temperature.Methods:The ejaculate of Boer buck was added to skimmed egg yolk diluent without(the control group)and with adding 1μg of chitosan nanoparticles of green tea extract per mL of diluent(the treatment group).Then,the diluted semen was filled in French mini straws containing 60×106 live sperm per straw,frozen in a standard protocol,and stored as frozen semen at−196℃for a week.Six replicates from each group were diluted for 30 s at 37℃or 39℃sterile water to evaluate the semen quality.Results:Post-thawing(at 37℃or 39℃)of live sperm,progressive motility,and plasma membrane integrity were lower compared to those of the pre-freezing stage(P<0.05).Thawing at 37℃resulted in no significant difference in live sperm,progressive motility,and plasma membrane between the control group and the treatment group(P>0.05).The live sperm,progressive motility,and plasma membrane of the treatment group in the pre-freezing stage,and post-thawed at 39℃were higher compared to those of the control group(P<0.05).There was no significant difference in malondialdehyde(MDA)concentration,DNA fragmentation,and catalase concentration of thawing at 37℃compared to those of 39℃in the same group.The MDA concentration and DNA fragmentation in thawing at 37℃and 39℃of the treatment group were significantly lower than those of the control group(P<0.05).However,the catalase concentration in thawing at 37℃and 39℃of the treatment group was not significantly different than the control group(P>0.05).Conclusions:Higher quality post-thawing Boer buck semen is achieved by adding 1μg/mL of chitosan nanoparticles of green tea extract to the skimmed egg yolk diluent and thawing at 39℃.

Extraction, Production and Quality Evaluation of Margarine from Oil Extracted from Waste Biomass Peels of Avocado and Virgin Coconut Oil, Using Chitosan from Reared Shells as Preservative

The production and consumption of avocado pears generates tons of wastes, mainly the pear peels which are usually discarded, although they have been reported to contain important phyto-chemicals with biological activities. The adverse health effect associated with the consumption of saturated lipid based foods has ignited research on reformulation of lipid based foods to eliminate Trans Fatty Acids (TFAs). This study was thus aimed at the extraction and characterization of oil from Avocado Peels (APO) and evaluation of the quality of margarine produced from it. Five verities of pear were used for oil extraction by soxhlet method and physiochemical, oxidative, functional and antioxidant characterization was done. Margarines were formulated using a central composite design using oil blends of APO and Virgin Coconut Oil (VCO) with an oil ratio of 10:90, 40:60, 70:30 respectively, varied blending speed, blending time, and chitosan concentration. Samples were characterized and the effect of process parameters on the physiochemical and functional properties of the margarine studied. Optimized conditions were used to produce samples for sensory evaluation. Color, spreadability, aroma, taste and general acceptability was evaluated using ranking difference test. The results showed that the yield, density, and iodine values of APOs oils ranged from 14.91 ± 0.18 to 11.76 ± 0.46;0.93 ± 0.001 to 0.99 ± 0.1;46.63 ± 1.70 to 52.4 ± 0.63, their acid values, TBA and PV values ranged from 1.42 ± 0.39 to 1.97 ± 0.5;0.11 ± 0.002 to 0.18 ± 0.04;and 2.72 ± 0.14 to 4.43 ± 0.36 respectively, with Brogdon avocado peel variety having the overall best properties prepared blends of trans-free APO margarines showed that increase in APO ratio decreased melting point, increased oxidative stability and reduced moisture content of margarine samples. Chitosan addition leads to decrease moisture content and increase functional properties. VCO lead to increase in phenolic and flavonoid content of the margarines. Samples were spreadable and palatable with R20 being most palatable and the most accepted being R26 with a mean score of 7.07 ± 0.70. Decrease in color intensity increased acceptability. This study therefore demonstrated that avocado peel waste biomass can be valorized by using it as raw material for oil extraction, which can serve as good material for the production of trans-free margarines with good oxidative stability, functional and antioxidant properties.

ZnO Incorporated Acrylamide Grafted Chitosan Based Composite Film for Advanced Wound Healing Applications

This study was carried out to prepare ZnO nanoparticles incorporated acrylamide grafted chitosan composite film for possible biomedical application especially drug loading in wound healing. ZnO nanoparticles were prepared by co-precipitation method from zinc acetate di-hydrate and incorporated in acrylamide grafted chitosan. FT-IR and TGA of the prepared composite film confirmed the successful incorporation of ZnO nanoparticles in the acrylamide-grafted polymer matrix. SEM images showed that the ZnO nanoparticles were homogeneously distributed on the porous matrix of the composite film. Water uptake and buffer uptake analysis revealed that the composite film could hold water and buffer sufficiently, which facilitated the absorption of exudate from the wound site. Amoxicillin was loaded in the prepared composite film and the maximum loading efficiency was found to be 67.33% with drug concentration of 300 ppm. In vitro studies showed greater antimicrobial activity of drug-loaded composite film compared to both pure film and standard antibiotic disc. Finally, the In vivo mouse model showed maximum healing efficiency compared to conventional gauge bandages because the loading of antibiotic in the film produced a synergistic effect and healing time was reduced.

Adsorption of Phenanthrene in Soil to Biochar Modified by β-Cyclodextrin

In this study, the adsorption effect of β-cyclodextrin modified biochar (BC) on phenanthrene (PHE) in contaminated soil was investigated, aiming to provide an efficient and environmentally friendly remediation strategy for Polycyclic Aromatic Hydrocarbons (PAHs) contaminated soil. Through kinetic and isotherm analysis, β-CDBC-CA showed excellent phenanthrene adsorption performance, and the adsorption effect increased with the increase of time and was affected by temperature. The results show that β-CDBC-CA can not only effectively adsorb phenanthrene in soil, but also serve as a surfactant to help desorption phenanthrene adsorbed by soil organic matter and improve the efficiency of microbial degradation. The experimental data showed that the Elovich model could describe the adsorption behavior of β-CDBC-CA on phenanthrene well, while Langmuir and Freundlich models performed better in fitting parameters, revealing the adsorption mechanism of phenanthrene in contaminated soil by β-cyclodextrin-modified biochar. In addition, temperature has a significant effect on the adsorption capacity of β-CDBC-CA, and its application in soil remediation can be optimized by adjusting temperature. This study not only provides new materials and technical means for soil remediation but also provides important data support for an in-depth understanding of the environmental behavior of PAHs. By citing relevant research results, this study further improves the control and understanding of environmental risks of PAHs, which is of great significance for the protection of ecological environment and human health.