SYNTHESIS AND IDENTIFICATION OF CONDUCTING POLYANILINE DOPED WITH RARE EARTH CHLORIDE

Polyaniline doped with rare earth chloride was synthesized in organic solvent and identified by elemental analysis and infrared spectroscopy. The experimental results show that there exists both doping and complexation at the same time in the resulting product. When pH4. Moreover, polyaniline doped with rare earth chloride exhibits better thermal stability than that doped with hydrochloric acid.

Study of Metal-Oxygen Vibrations in Rare Earth o-Chlorobenzoates

The far-IR spectra of ML3&middotH2O (M=Y, La-Lu; HL=o-chlorobenzoic acid) have been studied, and the wavenumbers of M-O vibrations (νM-O) have been assigned. It is found that ν-O increases as the atomic number of lanthanide element increase. Moreover, the plot of νM-O-L (L is the total orbital angular quantum number of lanthanide ion in ground state) shows an inclined W systematics.

Electrochemical Study on Formation of Dy-Ni Alloy in Molten Chlorides

The cyclic voltammetry, electrode potential-time curve after potentiostatic electrolysis, potential-step method and X-ray diffraction were used to study the electrochemical reaction of Dy (III) in NaCl-KCl equimolar mixture on Ni electrode. The DyNi5 forms at first and then the intermetallic compounds of DyNi containing more Dy form in sequence. The metallic Dy deposits at last. The standard free energy of formation for DyNi5 determined is -125.6 kJ/mol at 973K. The diffusion coefficient of Dy into DyNi5 phase determined is 8×0-10 cm2/s at 1032 K. The diffusion activation energy of Dy atoms in its intermetallic compound is 101.3 kJ/mol at 973K.

Effects of Samarium Chloride on Porcine Thyroid Cells in Vitro

To study the effects of various concentrations of SmCl3 on the morphology and functions of porcine thyroid cells in vitro, the methods of the electron microscope and radioimmunoassay were used. The investigation showed that when the thyroid cells were cultured in the presence of 0.001 and 0.01 mmol/L SmCl3, the measured levels of tetraiodothyronine (T4) were much higher than those in control cells and iodine uptake by thyroid cells increased, and the cells appeared to be active functional morphology under the electron microscope. When the thyroid cells were cultured in the presence of 0.1 mmol/L SmCl3, the levels of T4 and iodine uptake by cells decreased as compared with those in control cells, and the morphological changes of the cells presented an inactive functional state. From the evidences mentioned above, it demonstrates that very low concentrations (0.001 and 0.01 mmol/L) of SmCl3 promote synthesis and secretion of thyroid hormone, whereas a higher concentration (0.1 mmol/L of SmCl3) inhibits the synthesis and secretion of thyroid hormone.

Carbon-based materials for electrochemical dechlorination

Electrochemical dechlorination reaction(EDR)is a promising,environmentally friendly,and economically profitable technology for treating chlorinated organic pollutants.For efficient environmental protection,electrocatalysts with high stability and low cost are of extremely significance to the development of EDR technology.Carbon-based materials have aroused broad interest as electrocatalysts for many electrochemical reactions due to their characteristics including large specific surface area,controllable structure,good conductivity,and chemical stability.For EDR,the carbon-based materials also show many unique superiorities,like strong adsorption capacity to chlorinated organic compounds(COCs),excellent catalytic activity and stability,and environmental compatibility.This review starts with a detailed summary on the mechanisms of electrochemical dechlorination(direct and indirect electron transfer pathway)and factors affecting the effectiveness of EDR.Then the paper comprehensively overviews the current progresses of carbon-based materials for EDR of COCs,following their two major application scenarios,i.e.,directly as electrocatalysts and as advanced supports for other catalysts.Moreover,the formation of different active sites in carbon-based electrocatalysts and their EDR activities are analyzed.Finally,the current challenges and perspectives in this field are discussed.This review will provide an in-depth understanding for the design of advanced carbon-based materials and promote the development of EDR technology.

Real-time restoration of rotational blurred image using gradient-loading

The key to the restoration of rotational motion blurred image is how to restore the image under a low cost and to correct the irreversibility of the degradation function matrix. Based on the special qualities of degradation function matrix and precise deduction in space-domain, we present a new approach using gradient-loading for restoration of rotational blurred image. By easily adding a gradient operator, the irreversibility of the original matrix is corrected and can be applied for inverse filtering then. Gradient- loading is the optimized approach which combines the advantages of both the approaches using constrained least square filtering and traditional diagonal-loading. Compared with the approach using least square filtering, its peak signal-to-noise ratio （PSNR） is improved from 3.18 to 6.46 dB, while the computing time is reduced to 1/2 - 1/3. Experimental results demonstrate the effectiveness, noise-resistibility, robustness, and low complexity of this approach, which make it more suitable for real-time environment.

Localized modes in orientation-disordered one-dimensional media with uniaxial scatterers

Localized modes in one-dimensional （1D） media with uniaxial scatterers that are assumed to be order in spatial location but disorder in spatial orientation of their optical axis are investigated. Based on the holistic effect model in random laser, i.e., the random laser is due to the interaction of the complex localized modes in active random media with local aperiodic quasi-structure with appropriate pump light, a physical model on this type of random media is found. Its disorder degree is defined by D = no/ne. Then, the typical transmission spectrum through the random media and the light field intensity distribution corresponding to the defect modes in photonic band-gap are calculated numerically by means of the transfer matrix method, and the condition that the localized mode appears is discussed. Results show that the medium disorder plays an important role in determining the lightwave state. The localized state appears when the medium disorder is strong enough, and a new mechanism creating random laser phenomenon is brought forward.

Application of nanodiamonds in human body fluid analysis by matrix-assisted laser desorption/ionization mass spectrometry

Direct mass spectrometric analysis of complex biological samples is very important and challenging. In this paper, nanodiamonds have been successfully used in matrix-assisted laser desorption/ionization mass spectrometric analysis of human serum and urine. As a practical tool and platform, it can be widely used in the field of humoral proteomics, and it plays a very promising role in clinical diagnosis, including identification of novel disease-associated biomarkers.

Effects of acid anions, major metallic elements, and chlorides on Li detection by DFWM in graphite furnace

In trace Li analysis with degenerate four-wave mixing （DFWM） method, acid anions and major metallic elements are dominant interferences in Li-eontaining samples. To better use DFWM technique to analyze trace Li in actual samples, we study their effects on Li DFWM signal intensity. It is found that K, Cs, and Ni can enhance the Li DFWM signal, SO4^2, PO^34-, Cl-, and Ca can cause significant suppression, and NO3-, Mg, Ba, Sr, and Na almost have no effects. Finally, we use HaBOa to eliminate the depressive effects of chlorides on Li DFWM signal. The result is also of reference in other trace elements analysis with DFWM.

Average kinetic energy of ions ejected from pure Coulomb explosions of methane clusters

We use an electrostatic model to study the average kinetic energy of ions ejected from the pure Coulomb explosions of methane clusters （CA4）n （light atom A=H and D）. It is found that the ratio of the average kinetic energy of the ions to their initial average electrostatic potential energy is irrelevant to the cluster size. This finding implies that as long as the ratio is given, the average kinetic energies of the ions can be simply estimated from their initial average electrostatic potential energies, rather than from the timeconsuming simulations. The ratios for the different charge states of carbon ions are presented.

Carbon Nanotube-Textured Sand for Controlling Bioavailability of Contaminated Sediments

Sand particles textured with multi-walled carbon nanotubes (MWCNTs) can efficiently control the mobility and bioavailability of contaminants found in aquatic sediments. Adsorption measurements for a wide variety of aquatic contaminants (chlorinated hydrocarbons) on MWCNT-textured sand showed orders of magnitude increase in their sorption coefficients compared to traditional materials (sand) when used for physically separating contaminated sediments from overlying water. Molecular dynamics simulations performed on model experimental systems emphasize that the hydrophobic interactions of the MWCNT surfaces play a crucial role in driving the water molecules away, promoting such enhanced contaminant uptake. The MWCNT-textured sand significantly reduced the migration of contaminants from sediments to overlying water and possesses suitable parameters needed for contaminant sequestration and sediment remediation technologies. The single step and scalable procedure described here for synthesizing robust MWCNT-textured sand surfaces will provide important improvements in the field of remediation/aquatic environment restoration technologies.

Enhanced catalytic complete oxidation of 1,2-dichloroethane over mesoporous transition metal-doped γ-Al_2O_3

High-surface-area mesoprous powders of γ-Al2O3 doped with Cu^2＋, Cr^3＋, and V^3＋ ions were prepared uia a modified sol-gel method and were investigated as catalysts for the oxidation of chlorinated organic compounds. The composites retained high surface areas and pore volumes comparable with those of undoped γ-Al2O3 and the presence of the transition metal ions enhanced their surface acidic properties. The catalytic activity of the prepared catalysts in the oxidation of 1,2-dichloroethane （DCE） was studied in the temperature range of 250-400℃. The catalytic activity and product selectivity were strongly dependent on the presence and the type of dopant ion. While Cu^2＋- and Cr^3＋-containing catalysts showed 100% conversion at 300℃ and 350℃, V3＋-containing catalyst showed considerably lower conversion. Furthermore, while the major products of the reactions over γ-alumina were vinyl chloride （C2H3Cl） and hydrogen chloride （HCl） at all temperatures, Cu- and Cr-doped catalysts showed siguiticantly stronger capability for deep oxidation to CO2.