Cr(Ⅲ)对锰氧化菌P.putida MnB1活性及功能的影响规律与机制

三价铬(Cr(Ⅲ))与锰氧化菌在环境中通常伴同存在,锰氧化菌介导生成的锰氧化物是Cr(Ⅲ)的主要天然氧化剂,探究Cr(Ⅲ)对锰氧化菌活性和功能的影响对于阐明环境中的锰循环和铬的迁移转化行为具有重要意义。以锰氧化模式菌Pseudomonas putida MnB1为研究对象,通过批实验探究了Cr(Ⅲ)对MnB1活性与功能的影响及其机制。结果表明,Cr(Ⅲ)浓度高于0.05 mmol/L时会造成MnB1的显著死亡,且Cr(Ⅲ)浓度越高杀菌作用越显著,当Cr(Ⅲ)高于0.02 mmol/L时会推迟锰的生物氧化,当Cr(Ⅲ)浓度高于0.2 mmol/L时完全抑制锰的生物氧化。机制研究表明,Cr(Ⅲ)诱导产生的胞内活性氧和Cr(Ⅲ)颗粒引起的细胞膜通透性改变共同影响了MnB1的生长代谢和功能。研究结果为认识锰的生物地球化学循环和铬的迁移转化行为提供了新的理论依据。

Removal of Chromium(Ⅲ) from Monoammonium Phosphate Solutions by a Porous Adsorbent of Fluor(calcium silicate) Composites

The products of monoammonium phosphate containing Cr^3+resulted in disqualification,and further posed a serious threat to ecological environment and human beings.Herein,the porous adsorbent of fluor(calcium silicate)composites(FCSc)was prepared by hydrothermal method using diatomaceous earth,hydrated lime and additive(NaF)as raw materials,which was characterized and used for the removal of Cr^3+from monoammonium phosphate solutions.The effects of different parameters,such as solution pH,initial Cr^3+concentration,temperature and contact time on the adsorption of Cr^3+onto FCSc were investigated in details.The results indicated that the adsorption process was in agreement with the pseudo-second-order kinetic model and Freundlich isotherm.The spontaneous and endothermic nature of the adsorption process was obtained by analyzing various thermodynamic parameters(△G0,△H0,and△S0).In addition,computational monte carlo simulations between Cr3+ions and FCSc were conducted to elucidate the adsorption mechanism.Such kind of porous adsorbent provided a potential application in the removal of impurities from monoammonium phosphate industry.

Synthesis,Crystal Structure and Interaction with DNA of a Novel Chromium(Ⅲ) Complex Containing Salicylaldehyde Semicarbazone

The novel chromium（Ⅲ） complex with salicylaldehyde semicarbazone was synthesized and characterized by IR spectra and single-crystal X-ray diffraction analysis. The crystal belongs to the orthorhombic system, space group Pbca with a = 8.9849（13）, b = 12.0475（16）, c = 34.522（5）A, V = 3736.9（9）A3, Z = 8, C16H18C1CrN6O5, Mr= 461.81, De= 1.642 g/cm^3, F（000） = 1896,A（MoKα） = 0.799 mm^-1, the final R = 0.0370 and wR = 0.0827 for 2908 observed reflections with I 〉 2σ（I）. The interaction between the chromium（Ⅲ） complex with calf thymus DNA （Ct-DNA） has been investigated by absorption spectroscopy, fluorescence spectroscopy and viscosity measurements. The results indicated that the complex was bonded to Ct-DNA through a non-classical intercalative mode.

A flow chemiluminescence paper-based microfuidic device for detection of chromium(Ⅲ)in water

In this work,a solely gravity and capillary force-driven flow chemiluminescence(GCF-CL)paper-based microfuidic device has been proved for the first time as a new platforn for inex-pensive,usable,mini mally instrumented dynamic chemiluninescence(CL)detection of chromium(Ⅲ)[Cr(Ⅲ)],where an appropriate angle of inclination between the loading and detection zones on the paper produces a rapid flow of CL prompt solution through the paper charnel.For this study,we use a cost-effective paper device that is manufactured by a simple wax screen-printing method,while the signal generated from the Cr(Ⅲ)-catalyzed oxidation of luminol by H_(2)O_(2) is recorded by a low-cost and luggable CCD camera.A series of GCF-CL affecting factors have been evaluated carefully.At optimal conditions,two linear relationships between GCF-CL intensities and the logarithms of Cr(Ⅲ)concentrations are obtained in the concentration mnges of 0.025-35 mg/L and 50-500 mg/L separately,with the detection limit of 0.0245mg/L for a les than 30s assay,and relative standard deviations(RSDs)of 38%,4.5%and 2.3%for 0.75,5 and 50 mg/L of Cr(Ⅲ)(n=8).The above results indicate that the GCF-CL paper-based microfluidic device possesses a receivable sensitivity,dynamic range,storage stability and reproducibility.Finally,the developed GCF-CL is utilized for Cr(Ⅲ)detection in real water samples.

Chromium (Ⅲ) Biosorption of Deinococcus radiodurans and Its Vitreoscilla Haemoglobin (vgb) Gene-Transferred Recombinants

Objectives:This study used Deinococcus radiodurans,which is extremely resistant to oxidative damage,genotoxic chemicals,high levels of ionising and ultraviolet radiation and drying,and its Vitreoscilla haemoglobin(vgb)gene-cloned recombinant with the vgb−recombinant strain as a control.In addition to the conditions wherein bacteria have an optimum Cr(Ⅲ)biosorption capacity,the contribution of the vgb gene to the biosorption ability of the bacteria has been investigated by providing the organism with a more oxygenic environment.Methods:Bacteria were produced and metal stock solution was prepared.To determine the Cr(Ⅲ)removal capacities of wild and recombinant D.radiodurans strains,the residual metal concentration in aqueous media at the beginning and after biosorption was determined in Atomic Absorption Spectrophotometer.Some optimal conditions were created for the biosorption conditions to occur.Conclusions:The optimisation tests showed that Cr(Ⅲ)reached the highest biosorption capacity within 15 minutes at a metal concentration of 2,000 ppm,30°C,pH 5.0 and 150 rpm stirring speed in all the three bacteria.The vgb gene had no significant contribution to the biosorption capacity.

Cr(Ⅲ)离子印迹聚合物的制备及性能研究

以Cr(Ⅲ)为模板离子,采用表面印迹法,将氨基化多壁碳纳米管改性为乙烯化多壁碳纳米管作为固体基质,通过印迹体系的优化,制备了一系列Cr(Ⅲ)离子印迹聚合物[Cr(Ⅲ)-IIPs]及相应的非印迹聚合物[Cr(Ⅲ)-NIPs].在较优实验条件下制备的Cr(Ⅲ)-IIP1,吸附量为3.82 mmol·g^(−1),印迹因子为1.65.通过扫描电子显微镜(SEM)、氮气吸附/脱附(BET)、红外光谱(FIR)、热重分析(TG)等对Cr(Ⅲ)-IIP1及相应的Cr(Ⅲ)-NIP1,进行结构表征和性能评价.研究结果表明,Cr(Ⅲ)-IIP1属于热稳定性良好的吸附材料,吸附行为符合准二级动力学模型和Freundlich等温吸附模型,以化学吸附和多分子层吸附为主;在“竞争离子”Co(Ⅱ)、Ni(Ⅱ)和Pb(Ⅱ)共存条件下,对Cr(Ⅲ)离子具有较强的吸附能力和良好的选择性.说明在较优实验条件下制备的Cr(Ⅲ)-IIP1,有望作为一种新型的Cr(Ⅲ)离子吸附材料,去除和回收废水中的Cr(Ⅲ)离子.

Effect of Fe(Ⅲ) on the bromate reduction by humic substances in aqueous solution

Humic substances are ubiquitous redox-active organic compounds of environment. In this study, experiments were conducted to determine the reduction capacity of humic acid in the man-ix of bromate and Fe（Ⅲ） solutions and the role of Fe（Ⅲ） in this redox process. The results showed that the humic acid regenerated Fe（Ⅱ） and reduced bromate abiotically. The addition of Fe（Ⅲ） could accelerate the bromate reduction rate by forming humic acid-Fe（Ⅲ） complexes. Iron species acts as electron mediator and catalyst for the bromate reduction by humic acid, in which humic acid transfers electrons to the complexed Fe（Ⅲ） to form Fe（Ⅱ）, and the regenerated Fe（Ⅱ） donate the electrons to bromate. The kinetics study on bromate reduction further indicated that bromate reduction by humic acid-Fe（Ⅲ） complexes is pH dependent. The rate decreased by 2-fold with the increase in solution pH by one unit. The reduction capacity of Aldrich humic acid was observed to be lower than that of humic acid or natural organic matter of Suwanne River, indicating that such redox process is expected to occur in the environment.

Thickness Dependence of Structural and Optical Properties of Chromium Thin Films as an Infrared Reflector for Solar-thermal Conversion Applications

The thermal emittance of Cr film, as an IR reflector, was investigated for the use in SSAC. The Cr thin films with different thicknesses were deposited on silicon wafers, optical quartz and stainless steel substrates by cathodic arc ion plating technology as a metallic IR reflector layer in SSAC. The thickness of Cr thin films was optimized to achieve the minimum thermal emittance. The effects of structural, microstructural, optical, surface and cross-sectional morphological properties of Cr thin films were investigated on the emittance. An optimal thickness about 450 nm of the Cr thin film for the lowest total thermal emittance of 0.05 was obtained. The experimental results suggested that the Cr metallic thin film with optimal thickness could be used as an effective infrared reflector for the development of SSAC structure.

Kinetics and Mechanism of Iridium(Ⅲ)-Catalyzed Oxidation of Ethanol Amine by Cerium(Ⅳ) in Sulfuric Acid Media

In this study, the kinetics and mechanism of the iridium（ Ⅲ ） -catalyzed oxidation of ethanol amine（EAN） by cerium（Ⅳ） in a sulfuric acid medium was investigated using titrimetric technique of redox in a temperature range of 298--313 K. It was found that the reaction is of first order with respect to Ce（ Ⅳ ） and It（ Ⅲ ）, and a positive fractional order with respect to EAN. It was also found that the pseudo-first-order （ [EAN ] 〉〉 [ Ce （ Ⅳ） ] ） rate constant koba decreases with the increase of [ H^＋ ] and [ HSO^-4 ]. Under the protection of nitrogen gas, the reaction system can initiate the polymerization of acrylonitrile, indicating the generation of free radicals. On the basis of the experimental results, a suitable mechanism was proposed. From the dependence of koba on the concentration of hydrogen sulfate, Ce（SO4）2 was found to be the kinetically active species. The rate constants of the rote-determining step together with the activation parameters were evaluated.

Trace-Level Analysis of Hexavalent Chromium in Lake Sediment Samples Using Ion Chromatography Tandem Mass Spectrometry

The analysis of hexavalent chromium, Cr(VI), in soil and sediment samples has been predominantly carried out in materials containing elevated levels. Reliable analysis of trace-level of Cr(VI) in sediment samples remains challenging. Cr(VI) analyses with multipoint calibration and speciated isotope dilution (SID) adapted from U.S. EPA method 6800 were used to measure lower-level Cr(VI) on an ion chromatograph coupled with a tandem mass spectrometer (IC-MS/MS). Lake sediment samples were collected from various locations in Northern Ontario and Cr(VI) was extracted using both alkaline digestion and ethylene diaminetetraacetic acid (EDTA) extraction. Certified reference materials were extracted and analyzed by IC-MS/MS and UV-VIS detection. The SID-MS approach allowed for the quantification of Cr(VI) in samples with concentration levels below 0.5 μg.g-1 wet weight.

Using Ferrous Ion for the Reductive Degradation of Hexavalent Chromium

This paper discusses the toxicity and mobility of chromium species. And it presents the extent and kinetics of reductive remediation of hexavalent chromium, Cr+ using ferrous ion, Fe2+. Molar ratios of 1:3 and 1:6 of Cr (VI) to Fe (II) were used. Integral method of data analysis showed reaction followed second-order kinetics with R square values near unity. Reaction was initially fast but with a rapid precipitation attributed to Cr (III)-Fe (III) in previous studies. This colloidal precipitate ultimately stops the reaction, which explains while conversion efficiency increases with increased molar ratio of Cr (VI) to Fe (II). The impact of pH was investigated by adjusting the Cr (VI)-Fe (II) medium to pH 2.78, 5.24, 7.00, 9.00 and 11.96 using predetermined drops of acid or base. Reaction was more rapid under alkaline conditions with higher extent of degradation consistent with previous research. In soil system, mass transfer limitation was hardly noticed as high extent of reduction was recorded relative to aqueous phase. The high solubility of Cr (VI) aided the release into the aqueous media for reduction by ferrous sulfate.

聚合物改性膨润土对钢渣渗滤液及其Cr(Ⅲ)离子的阻隔与吸附特性研究

【目的】针对传统膨润土防渗衬垫在侵蚀性环境中防渗性能会大幅劣化的难题,自主研发了一种聚合物改性膨润土。【方法】通过渗透实验研究了聚合物改性膨润土对高盐溶液、强碱溶液和实际钢渣渗滤液的渗透系数,并采用Batch吸附实验探究了吸附时间、溶液pH值和溶液浓度对聚合物改性膨润土吸附钢渣渗滤液中Cr(Ⅲ)离子的影响。【结果】实验结果表明:未改性的钠化钙基膨润土对侵蚀性溶液的刚性壁渗透系数高达1×10^(-8)m/s,而聚合物改性膨润土对高盐、强碱和钢渣渗滤液的柔性壁渗透系数均小于1×10^(-11)m/s,且刚性壁渗透系数约为3×10^(-11)m/s,在高盐、强碱等侵蚀性环境中表现出更优越的防渗性能。【结论】聚合物改性膨润土对Cr(Ⅲ)的吸附量随着吸附时间、溶液pH值和溶液浓度的增加而增加。钠化钙基膨润土和聚合物改性膨润土对Cr(Ⅲ)吸附符合准二阶吸附动力学模型;Langmuir等温吸附模型更好地描述了钠化钙基膨润土和聚合物改性膨润土对Cr(Ⅲ)的吸附特性。

Effect of partial pressure of reactive gas on chromium nitride and chromium oxide deposited by arc ion plating

The effects of reactive gas partial pressure on droplet formation, deposition rate and change of preferred orientation of CrN and Cr2O3 coatings were studied. For CrN coatings, as nitrogen partial pressure increases, the number and size of droplets increases, the deposition rate initially increases obviously and then slowly, and the preferred orientation of CrN changes from high-index plane to low-index one. For Cr2O3 coatings, with the increase of oxygen partial pressure, the number and size of droplets decreases, the deposition rate decreases and the (300) becomes the preferred orientation. These differences are ascribed to the formation of CrN (with a lower melting point) and Cr2O3 (with a higher melting point) on the surface of Cr target during the deposition of CrN and Cr2O3. Complete coatings CrN or Cr2O3 film can be formed when reactive gas partial pressure gets up to 0.1 Pa. The optimized N2 partial pressure for CrN deposition is about 0.1?0.2 Pa in order to suppress the formation of droplets and the suitable O2 partial pressure for Cr2O3 deposition is approximately 0.1 Pa for the attempt to prevent the peel of the coating.

Interpenetrating polymers supported on microporous polypropylene membranes for the transport of chromium ions

Modifying polypropylene membranes with interpenetrating polymer networks(IPNs) through the incorporation of poly(glycidyl methacrylate-N-methyl-D-glucamine)(P(GMA-NMG)) was performed by in situ synthesis via radical polymerization. The surface of the polypropylene membrane was activated by hydrophilic grafted polyelectrolyte, and then, pressure injection was used for the impregnation of the reactive solution in the membrane.Two types of pore-filled membranes were synthesized, chelating interpenetrating homopolymer networks of P(GMA-NMG), and chelating-ion exchange interpenetrating polymer networks(e.g., P(GMA-NMG)/P(AA),P(GMA-NMG)/P(AMPSA), and P(GMA-NMG)/P(Cl VBTA)). After their synthesis, the modified polypropylene membranes were characterized using techniques such as the electrokinetic potential, SEM, FT-IR, and Donnan dialysis to corroborate the chromium ion transport. The P(GMA-NMG) and complex network membranes exhibited a hydrophilic character with a water-uptake capacity between 20% and 35% and a percentage of modification between 4.0% and 7.0% in comparison with the behavior of the unmodified polypropylene membrane.Hexavalent chromium ions were efficiently transported from the food chamber at p H 9.0 when the 65.2%MTA1 P(Cl VBTA) homopolymer IPN membrane and 48.5% MTAG P(GMA-NMG)/P(Cl VBTA) IPN membrane were used. Similarly, hexavalent chromium ions were removed from the food chamber at pH 3.0 when MTAG(63.30%) and MTA1(35.68%) were used in 1 mol·L^(-1)Na Cl solution as the extraction reagent.

Fabrication and adsorption property of novel adsorbent for potential application to wastewater with Fe(Ⅲ) ions

The spherical macroporous cellulose(SMC) was fabricated using medical absorbent cotton as raw material and nano CaCO3 as porogenic agents.And then,the phenylglycine was grafted onto the SMC to obtain the novel spherical macroporous cellulose derivative adsorbent(PSMC).FT-IR and scanning electron microscope(SEM) were employed to characterize the adsorbents and Fe3+ ions served as model solute to evaluate the adsorption property of the adsorbents.The experimental results show that the amount of porogenic agents and the value of pH have obvious influence on adsorption capacity of the adsorbents.The data of adsorption kinetic and isotherm display that the adsorbents possess excellent equilibrium adsorption capacity(348.94 mg/g) and have a bright prospect and considerable potential in the treatment of Fe3+ ions in wastewater.

EFFECT OF THE EXISTING STATES OF CHROMIUM ION ON THE COLOR CHARACTERISTICS OF DOPED β-C_2S

According to the theory of crystal field, the existing state of chromium ions in β-C_2S was studied with optical spectra and EPR. The energy levels of chromium ions were calculated. Chromium ions exist in form of Cr^(4+) and Cr^(5+) coordinated with distorted octahedra. The reason of fading of β-C_2S hydrate is that the strength of light absorption declines be- cause of the valence change of chromium ions and chroninm dissolves out and loses in water.

Separation of indium(Ⅲ), gallium(Ⅲ), and zinc(Ⅱ) with Levextrel resin containing di(2-ethylhexyl) phosphoric acid (CL-P204): Part Ⅱ. Mechanism and kinetics of adsorbing indium(Ⅲ)

The mechanism of adsorbing indium(Ⅲ) from sulfate solutions with CL-P204Levextrel resin containing di(-2-ethylhexyl) phosphoric acid was examined by batch operation andinfrared spectra. The results showed that the P204 adsorbed on the resin behaved in the similar wayto solvent extraction except that it was as a monomer in resin adsorbing but in dimeric form insolvent extraction. Three factors including temperature, indium(Ⅲ) concentration of solution, andthe size of resin particles which influence the In^(3+)/H^+ exchange on CL-P204 Levextrel resin wereinvestigated by the modified limited batch technique in order to determine the kinetics ofIn^(3+)/H^+ exchange. It was found that the rate of ion exchange increased with the temperature andthe concentration of solution increasing and with the size of the resin particles decreasing.According to the expression developed by Boyd et al., the controlling factor of In^(3+)/H^+ exchangeon CL-P204 Levextrel resin was the diffusion through the resin particles. The effective diffusioncoefficient, activation energy, and entropy of activation in the particle-diffusion were determinedas 1.57 x 10^(-10) m^2/s, 11.9 kJ/mol, -84.1 J/(mol·K), respectively.

Electroreduction of Co(Ⅱ) and La(Ⅲ)in UreaMelt

Electroreduction of Co(Ⅱ)to metallic cohalt in urea melt is irrevsible in one step.The transfer coeffi-cient of electrode reaction of Co(Ⅱ)+2e=Co(O)and the diffusion coefficient of Co(Ⅱ)were determined.The lanthanum can be inductively codeposited with cobalt. The contents of lanthanum in cobalt-lanthanum de-posts increase with the shift of electrode potential to the negative direction and the raise of La(Ⅲ)/Co(Ⅱ)mo-lar ratio in the melt. The cyclic voltammetry,open circuit potential-time curve after potentiostatic electrolysisand electron probe analyas were used.