A complete and harmonized fundamental circuit relational graph with four linear and four memory elements is con- structed based on some newly defined elements, which provides a guide to developing novel circuit functi...A complete and harmonized fundamental circuit relational graph with four linear and four memory elements is con- structed based on some newly defined elements, which provides a guide to developing novel circuit functionalities in the future. In addition to resistors, capacitors, and inductors, which are defined in terms of a linear relationship between charge q, current i, voltage v, and magnetic flux φ, Chua proposed in 1971 a fourth linear circuit element to directly relate φ and q. A nonlinear resistive device defined in memory i-v relation and dubbed memristor, was later attributed to such an element and has been realized in various material structures. Here we clarify that the memristor is not the true fourth fundamen- tal circuit element but the memory extension to the concept of resistor, in analogy to the extension of memcapacitor to capacitor and meminductor to inductor. Instead, a two-terminal device employing the linear ME effects, termed transtor, directly relates φ and q and should be recognized as the fourth linear element. Moreover, its memory extension, termed memtranstor, is proposed and analyzed here.展开更多
This paper presents an analytical method for electromagnetic acoustic transducers （EMATs） under voltage excitation and considers the non-uniform distribution of the biased magnetic field. A complete model of EMATs i...This paper presents an analytical method for electromagnetic acoustic transducers （EMATs） under voltage excitation and considers the non-uniform distribution of the biased magnetic field. A complete model of EMATs including the non-uniform biased magnetic field, a pulsed eddy current field and the acoustic field is built up. The pulsed voltage excitation is transformed to the frequency domain by fast Fourier transformation （FFT）. In terms of the time harmonic field equations of the EMAT system, the impedances of the coils under different frequencies are calculated according to the circuit-field coupling method and Poynting＇s theorem. Then the currents under different frequencies are calculated according to Ohm＇s law and the pulsed current excitation is obtained by inverse fast Fourier transformation （IFFT）. Lastly, the sequentially coupled finite element method （FEM） is used to calculate the Lorentz force in the EMATs under the current excitation. An actual EMAT with a two-layer two-bundle printed circuit board （PCB） coil, a rectangular permanent magnet and an aluminium specimen is analysed. The coil impedances and the pulsed current are calculated and compared with the experimental results. Their agreement verified the validity of the proposed method. Furthermore, the influences of lift-off distances and the non-uniform static magnetic field on the Lorentz force under pulsed voltage excitation are studied.展开更多
The model of lumped element circuit ignores the finite time of signals to propagate around a circuit. However, using modern oscilloscope, the time of nanoseconds in a circuit can be measured. Then the speed of alterna...The model of lumped element circuit ignores the finite time of signals to propagate around a circuit. However, using modern oscilloscope, the time of nanoseconds in a circuit can be measured. Then the speed of alternating electricity can be obtained in a RL circuit. A typical RL circuit is formed by a power source, wire, resistance and inductance. The basic formula is: U(t)=I(t)R+LdI(t)/dt. It can be derived from the Ohm’s law and Kirchhoff laws. Based on our experimental results, this paper has discussed the new explanation of this equation in a RL circuit. As a result, the speed of alternating electricity is greater than light in a special RL circuit. The model of lumped element circuit can be improved when considering the finite time of signals.展开更多
在高压交流输电系统(HVAC)发生短路故障时,极大可能会产生含暂态分量(short circuit current transient component,SCTC)的短路故障电流;当SCTC含量很大时甚至会产生短路电流的零点漂移现象,会对故障限流器(fault current limiter,FCL)...在高压交流输电系统(HVAC)发生短路故障时,极大可能会产生含暂态分量(short circuit current transient component,SCTC)的短路故障电流;当SCTC含量很大时甚至会产生短路电流的零点漂移现象,会对故障限流器(fault current limiter,FCL)的限流工作和参数设计造成很大的影响。针对上述问题,提出了一种SCTC泄能型故障限流器(SCTC energy drain type fault current limiter,SEDFCL)及其参数设计方法,可以加快SCTC的衰减。首先,分析了SEDFCL与SCTC的相互影响和SEDFCL的电磁路工作机理,并研究了SEDFCL场路耦合特性,对电磁参数进行了设计;然后,通过有限元仿真搭建了220 kV SEDFCL模型,探究了SEDFCL结构的有效性、合理性、RC参数的调节作用,以及故障情况下SEDFCL功能的有效性;最后,搭建一台小容量样机,建立试验平台并进行样机试验,证实SEDFCL结构和功能的有效性。与传统五柱式限流器(five-column hybrid excitation type FCL,FHETFCL)相比,SEDFCL将时间常数显著降低117.66%,限流效果提高6.29%。展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11227405,11374347,11274363,and 11474335)the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB07030200)
文摘A complete and harmonized fundamental circuit relational graph with four linear and four memory elements is con- structed based on some newly defined elements, which provides a guide to developing novel circuit functionalities in the future. In addition to resistors, capacitors, and inductors, which are defined in terms of a linear relationship between charge q, current i, voltage v, and magnetic flux φ, Chua proposed in 1971 a fourth linear circuit element to directly relate φ and q. A nonlinear resistive device defined in memory i-v relation and dubbed memristor, was later attributed to such an element and has been realized in various material structures. Here we clarify that the memristor is not the true fourth fundamen- tal circuit element but the memory extension to the concept of resistor, in analogy to the extension of memcapacitor to capacitor and meminductor to inductor. Instead, a two-terminal device employing the linear ME effects, termed transtor, directly relates φ and q and should be recognized as the fourth linear element. Moreover, its memory extension, termed memtranstor, is proposed and analyzed here.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10974115)
文摘This paper presents an analytical method for electromagnetic acoustic transducers （EMATs） under voltage excitation and considers the non-uniform distribution of the biased magnetic field. A complete model of EMATs including the non-uniform biased magnetic field, a pulsed eddy current field and the acoustic field is built up. The pulsed voltage excitation is transformed to the frequency domain by fast Fourier transformation （FFT）. In terms of the time harmonic field equations of the EMAT system, the impedances of the coils under different frequencies are calculated according to the circuit-field coupling method and Poynting＇s theorem. Then the currents under different frequencies are calculated according to Ohm＇s law and the pulsed current excitation is obtained by inverse fast Fourier transformation （IFFT）. Lastly, the sequentially coupled finite element method （FEM） is used to calculate the Lorentz force in the EMATs under the current excitation. An actual EMAT with a two-layer two-bundle printed circuit board （PCB） coil, a rectangular permanent magnet and an aluminium specimen is analysed. The coil impedances and the pulsed current are calculated and compared with the experimental results. Their agreement verified the validity of the proposed method. Furthermore, the influences of lift-off distances and the non-uniform static magnetic field on the Lorentz force under pulsed voltage excitation are studied.
文摘The model of lumped element circuit ignores the finite time of signals to propagate around a circuit. However, using modern oscilloscope, the time of nanoseconds in a circuit can be measured. Then the speed of alternating electricity can be obtained in a RL circuit. A typical RL circuit is formed by a power source, wire, resistance and inductance. The basic formula is: U(t)=I(t)R+LdI(t)/dt. It can be derived from the Ohm’s law and Kirchhoff laws. Based on our experimental results, this paper has discussed the new explanation of this equation in a RL circuit. As a result, the speed of alternating electricity is greater than light in a special RL circuit. The model of lumped element circuit can be improved when considering the finite time of signals.
文摘在高压交流输电系统(HVAC)发生短路故障时,极大可能会产生含暂态分量(short circuit current transient component,SCTC)的短路故障电流;当SCTC含量很大时甚至会产生短路电流的零点漂移现象,会对故障限流器(fault current limiter,FCL)的限流工作和参数设计造成很大的影响。针对上述问题,提出了一种SCTC泄能型故障限流器(SCTC energy drain type fault current limiter,SEDFCL)及其参数设计方法,可以加快SCTC的衰减。首先,分析了SEDFCL与SCTC的相互影响和SEDFCL的电磁路工作机理,并研究了SEDFCL场路耦合特性,对电磁参数进行了设计;然后,通过有限元仿真搭建了220 kV SEDFCL模型,探究了SEDFCL结构的有效性、合理性、RC参数的调节作用,以及故障情况下SEDFCL功能的有效性;最后,搭建一台小容量样机,建立试验平台并进行样机试验,证实SEDFCL结构和功能的有效性。与传统五柱式限流器(five-column hybrid excitation type FCL,FHETFCL)相比,SEDFCL将时间常数显著降低117.66%,限流效果提高6.29%。
