Development Model of Ecotourism Circular Economy in Lakefront Scenic Areas——A Case Study of Luchong Scenic Area by Fuxian Lake,Yunnan Province

Strategies of "guidance to different types of areas,promotion step by step" were given to study the development model of ecotourism circular economy in different types of tourist sites.By taking Luchong Scenic Area by the Fuxian Lake,Yunnan Province for an example,the general model of ecotourism circular economy in lakefront scenic areas was summarized,it was stressed that ecological principles and "5R"(rethinking,reducing,reusing,recycling,repairing)should be followed in its construction.Characteristics of a lakefront scenic area and actual conditions of its location region should be taken into consideration,with sewage treatment and lakefront environment protection as the focus,green scenic area and green tourism community as the carrier,a development model of ecotourism circular economy was established by considering relevant elements such as clean production,green consumption,waste processing,ecological compensation and industrial coupling,effective measures were given to introduce theories into practices,which would be the only chance for the lakefront scenic area realizing its sustainable development.

Development Model of Tourism Companies Based on the Concept of Circular Economy

This paper summarizes the circular economy development model of tourism companies,and explores the support system which guaranteed the development of circular economy in tourism companies.It takes Xiedao Resort as an example to summarize its development model of circular economy.

Evaluation and advancement of the integrated circular economy model of farming and stock raising

The integrated circular economy model of farming and stock raising(ICEMFSR)has attracted increased attention as an effective model for solving the current irrational allocation of agricultural resources and realizing the agricultural value-added industrial chain.This study uses emergy analysis to comprehensively examine and evaluate the economic benefits,environmental pressures,and sustainable development levels of ICEMFSR in Shucheng County,China.The results show that the ICEMFSR possesses the value of popularization with optimally allocated resources in the studied region,in which the emergy yield ratio(EYR),emergy loading ratio(ELR),and emergy sustainable index(ESI)in this model accounted for 3.59,1.25,and 2.89,respectively.This result indicates a leading position in the national agricultural system.Hence,this study constructs a new model based on the coupling of emergy evaluation and multi-objective linear programming to study ICEMFSR.Consequently,the EYR,ELR,and ESI respectively varied by +24.23%,10.40%,and +38.06%after replanning of ICEMFSR.This variation implies a significant improvement in the sustainable development level of the model.In addition,the optimized scenario design for key substances is proposed based on traceability and the reduce-reuse-recycle principle,including biogasification of crop straw and enhancement of crop scientific planting capacity.

A MECHANICS MODEL FOR CIRCULAR FORM TOOL CUTTING

ＡＭＥＣＨＡＮＩＣＳＭＯＤＥＬＦＯＲＣＩＲＣＵＬＡＲＦＯＲＭＴＯＯＬＣＵＴＴＩＮＧＸｉａＷｅｉ；ＬｉＹｕａｎｙｕａｎ；ＺｈｏｕＺｅｈｕａ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｉｃａｌＥｎｇｉｎｅｅｒｉｎｇ，ＳｏｕｔｈＣｈｉｎａＵｎｉｖｅｒｓｉｔｙｏｆ...

Iterative technique for circular thin plates on Gibson elastic foundation using modified Vlasov model

In this paper, to investigate the influence of soil inhomogeneity on the bending of circular thinplates on elastic foundations, the static problem of circular thin plates on Gibson elasticfoundation is solved using an iterative method based on the modified Vlasov model. On the basisof the principle of minimum potential energy, the governing differential equations and boundaryconditions for circular thin plates on modified Vlasov foundation considering the characteristics ofGibson soil are derived. The equations for the attenuation parameter in bending problem are alsoobtained, and the issue of unknown parameters being difficult to determine is solved using theiterative method. Numerical examples are analyzed and the results are in good agreement withthose form other literatures. It proves that the method is practical and accurate. Theinhomogeneity of modified Vlasov foundations has some influence on the deformation andinternal force behavior of circular thin plates. The effects of various parameters on the bending ofcircular plates and characteristic parameters of the foundation are discussed. The modified modelfurther enriches and develops the elastic foundations. Relevant conclusions that are meaningful toengineering practice are drawn.

某混凝土筒仓结构设计研究

圆形筒仓设计充分利用了薄壁筒壳结构的优越性,薄壁的配筋与受力、边缘效应、地震等因素有关,在设计过程中需要重点考虑。基于某实际工程案例,采用Midas Gen进行了整体建模计算,通过深仓贮料和浅仓贮料计算了筒仓侧壁的受力,并对各荷载工况进行了分析。由于地震力对筒仓会产生较大影响,分析了不同地震工况下地震力的大小。在此基础上,贮料荷载对于仓壁的水平作用较为明显,通过荷载组合对筒仓侧壁进行设计研究。总结了侧壁配筋的控制因素,为筒仓设计提供帮助。

基于Circular模型的大剪应变率点接触弹流界面滑移数值分析

采用Circular流变模型,将假定的流体的极限剪应力特性模型拟合入Reynolds方程,编写Fortran语言程序,数值模拟界面滑移效应.计算从弹流润滑(EHL)延展到动压润滑(HL)区域.随着速度增加,摩擦系数曲线出现反常波动,表现为两个异常拐点.在中、高速度下,模拟获得的接触轮廓等值线图中观测到入口凹陷及中心区下凸.进一步讨论了载荷、速度、综合弹性模量、滑滚比等因素对滑移的影响.界面滑移效应被认为是产生反常接触轮廓和摩擦力波动的主因,与试验结果互为验证.

Shear testing on rock tunnel models under constant normal stress conditions

Large shear deformation problems are frequently encountered in geotechnical engineering.To expose the shear failure mechanism of rock tunnels,compression-shear tests for rock models with circular tunnel were carried out,including single tunnel and adjacent double tunnels.The failure process is recorded by the external video and miniature cameras around the tunnel,accompanied by real-time acoustic emission monitoring.The experiments indicate that the shearing processes of rock tunnel can be divided into four steps:(i)cracks appeared around tunnels,(ii)shear cracks and spalling ejection developed,(iii)floor warping occurred,and(iv)shear cracks ran through the tunnel model.Besides,the roughness of the sheared fracture surface decreased with the increase in normal stress.Corresponding numerical simulation indicates that there are tensile stress concentrations and compressive stress concentrations around the tunnel during the shearing process,while the compressive stress concentration areas are under high risk of failure and the existence of adjacent tunnels will increase the degree of stress concentration.

Prediction of Streamwise Flow-Induced Vibration of A Circular Cylinder in the First Instability Range

The streamwise flow-induced vibration of a circular cylinder with symmetric vortex shedding in the first instability range is investigated, and a wake oscillator model for the dynamic response prediction is proposed. An approach is applied to calibrate the empirical parameters in the present model; the numerical and experimental results are compared to validate the proposed model. It can be found that the present prediction model is accurate and sufficiently simple to be easily applied in practice.

Load eccentricity effects on behavior of circular footings reinforced with geogrid sheets

In this paper, an experimental study for an eccentrically loaded circular footing, resting on a geogridreinforced sand bed, is performed. To achieve this aim, the steel model footing of 120 mm in diameterand sand in relative density of 60% are used. Also, the effects of depth of first and second geogrid layersand number of reinforcement layers （1e4） on the settlement-load response and tilt of footing undervarious load eccentricities （0 cm, 0.75 cm, 1.5 cm, 2.25 cm and 3 cm） are investigated. Test results indicatethat ultimate bearing capacity increases in comparison with unreinforced condition. It is observed thatwhen the reinforcements are placed in the optimum embedment depth （u/D ？0.42 and h/D ？0.42）, thebearing capacity ratio （BCR） increases with increasing load eccentricity to the core boundary of footing,and that with further increase of load eccentricity, the BCR decreases. Besides, the tilt of footing increaseslinearly with increasing settlement. Finally, by reinforcing the sand bed, the tilt of footing decreases at 2layers of reinforcement and then increases by increasing the number of reinforcement layers.

Circular Economy in HealthCare Challenges and Issues

Some major countries like India investing in biopharmaceutical industry have designed new business models of circular economics called the“Uber for HealthCare”for instance by Basu et al.,for medical equipment in India(Euro,Healthcare Stream,&Dublin 2018).This raises major challenges for global supply of medicine and Value Chains in life science.This contribution will provide a review of recent experiences and an analysis of how it impacts current global value chains.Current economic model development strengthening the demand side of the system and applications of choice modeling to capture heterogeneity of demand at individual level face with new circular strategies implemented by health care organizations and economic suppliers.The all-value system is challenged by such models including the critical decision points at prognostic,diagnostic,and treatment stages;platforms such as the Her2adaptive technology platform with cost sensitivity indexes proposed by Huttin and Liebman(Technology&HealthCare,2011)face also potential adaptation to integrate new priorities:for instance,in circular economy with integration of circular touch points.Research results like Van Boerdonk et al.(2021),demonstrate that reaching cleaner production with higher environmental values may become“paradoxical with lower or unimportant customer value”.Government and payers may need to create new policies for waste management and for sustaining reasonable and fair value for money in the health system.Moreover,the economics of sharing economy may need to find appropriate forms of centralization or decentralization in the organizations of health systems and decision-making processes.Circular models in health care in sharing economy may benefit single pathway models,often too expensive for affordable welfare contracts.This paper will continue the previous research agenda and papers on global value chains with the use of TiVa OECD database(joined in the WB-WTO project)and a quality paper on the biotech development chain and Covid-19(Huttin,2019;2021).

Depth factors for undrained bearing capacity of circular footing by numerical approach

The undrained vertical bearing capacity of embedded foundation has been extensively studied using analytical and numerical methods.Through comparing the results of a circular embedded foundation in the literature,a significant difference between the bearing capacity factors and depth factors is observed.Based on the previous research findings,numerical computations using FLAC code are carried out in this study to evaluate the undrained bearing capacity of circular foundations with embedment ratios up to five for different base and side foundation roughness conditions.Unlike the foundation base,the roughness of the foundation side has a significant effect on the bearing capacity.The comparison of the present results with numerical studies available in the literature shows that the discrepancy is related to the procedures used to simulate the foundation side interface conditions and to the estimation of the bearing capacity.

Study of Characteristics of the Radio-Frequency Sheath over a Substrate with a Circular Trench

Since processed substrates usually exhibit nonplanar surface structures in micro- electro-mechmfical-systems （MEMS） etching, a two-dimensional （2D） fluid model is developed to simulate the characteristics of the sheath near a conductive substrate with a circular trench, which is placed in an argon discharge powered by a radio-frequency （RF） current source. The model consists of 2D time-dependent fluid equations, the Poisson equation, and a current balance equation that can self-consistently determine the instantaneous voltage oll the substrate placed on a powered electrode. The effects of both the aspect ratio （depth/width） and the structure of the trench on the characteristics of the sheath are simulated. The time-averaged potential and electric field in the sheath are calculated and compared for different discharge parameters. The results show that the radial sheath profile is not uniform and always tends to adapt to the contour of the substrate, which is believed to be the moulding effect. Affected by the structure of the substrate surface, the potential and electric field near the inner and outer sidewalls of the trench exhibit obvious non-uniforlnity, which will inevitably lead to non-uniformity in etching, such as notching. Furthermore, with a fixed amplitude of the RF current source, the potential drops and the sheath thickness decrease with an increase in aspect ratio.

Buckling of a sandwich symmetrical circular plate with varying mechanical properties of the core

This paper is devoted to analytical and numerical studies of global buckling of a sandwich circular plate. The mechanical properties of the plate core vary along its thickness, remaining constant in the facings. The middle surface of the plate is its symmetrical plane. The mathematical model of the plate is presented. The field of displacements is formulated using the proposed nonlinear hypothesis that generalizes the classical hypotheses. The equations of equilibrium are formulated based on the principle of stationary total potential energy. The proposed mathematical model of the displacements considers the shear effect. The numerical model of the plate is also formulated with a view to verify the analytical one. Numerical calculations are carried out for the chosen family of plates. The values of the critical load obtained by the analytical and numerical methods are compared. The effects of the material properties of the core and the change of the plate radius on the critical load intensity are presented.

Second-harmonic generation circular dichroism spectroscopy from tripod-like chiral molecular films

The second-harmonic generation （SHG） circular dichroism in the light of reflection from chiral films of tripod-like chiral molecules is investigated. The expressions of the second-harmonic generation circular dichroism are derived from our presented three-coupled-oscillator model for the tripod-like chiral molecules. Spectral dependence of the circular dichroism of SHG from film surface composed of tripod-like chiral molecules is simulated numerically and analysed. Influence of ehiral parameters on the second-harmonic generation circular dichroism spectrum in chiral films is studied. The result shows that the second-harmonic generation circular dichroism is a sensitive method of detecting chirality compared with the ordinary circular dichroism in linear optics. All of our work indicates that the classical molecular models are very effective to explain the second-harmonic generation circular dichroism of chiral molecular system. The classical molecular model theory can give us a clear physical picture and brings us very instructive information about the link between the molecular configuration and the nonlinear processes.

MECHANISM AND CATASTROPHE THEORY ANALYSIS OF CIRCULAR TUNNEL ROCKBURST

Mechanism of circular tunnel rockburst is that, when the carrying capacity of the centralized zone of plastic deformation in limiting state reduces, the comparatively intact part in rock mass unloads by way of elasticity; rockburst occurs immediately when the elastic energy released by the comparatively intact part exceeds the energy dissipated by plastic deformation. The equivalent strain was taken as a state variable to establish a catastrophe model of tunnel rockburst, and the computation expression of the earthquake energy released by tunnel rockburst was given. The analysis shows that, the conditions of rockburst occurrence are relative to rock＇s ratio of elastic modulus to descendent modulus and crack growth degree of rocks; to rock mass with specific rockburst tendency, there exists a corresponding critical depth of softened zone, and rockburst occurs when the depth of softened zone reaches.

Numerical simulation of flow past circular duct

The Renormalization Group （RNG） k- ε turbulence model and Volume of Fluid （VOF） method were employed to simulate the flow past a circular duct in order to obtain and analyze hydraulic parameters. According to various upper and bottom gap ratios, the force on the duct was calculated. When the bottom gap ratio is 0, the drag force coefficient, lift force coefficient, and composite force reach their maximum values, and the azimuth reaches its minimum. With an increase of the bottom gap ratio from 0 to 1, the drag force coefficient and composite force decrease sharply, and the lift force coefficient does not decreases so much, but the azimuth increases dramatically. With a continuous increase of the bottom gap ratio from 1 upward, the drag force coefficient, lift force coefficient, composite force, and azimuth vary little. Thus, the bottom gap ratio is the key factor influencing the force on the circular duct. When the bottom gap ratio is less than 1, the upper gap ratio has a remarkable influence on the force of the circular duct. When the bottom gap ratio is greater than 1, the variation of the upper gap ratio has little influence on the force of the circular duct.

用于液体容器内液位测量的金属薄壁梁振动模态仿真研究

为实现用于液体容器内液位测量的金属薄壁梁振动模态的准确模拟,构建金属薄壁梁的有限元圆梁模型。该模型采用有限元法对金属薄壁梁纵向振动模型的特征频率进行分析,从而对金属薄壁梁暴露于外部刺激时所产生的纵向振动进行准确模拟。在所开展研究中,对薄壁梁采用圆梁分布质量模型,分析模型的前4种振动模态的特征频率。为验证该模型的有效性,将该模型对金属薄壁梁前4种纵向振动模态的模拟结果与理论模型结果、实际金属薄壁梁试验结果及其他两种仿真模型的模拟结果进行了对比。对比结果表明,所构建圆梁模型对金属薄壁梁纵向振动模态的模拟结果与理论、试验分析结果高度一致,且模拟结果效果明显优于其他两种模型。

Economic Development Mode and Countermeasure Research on the Nansi Lake Drainage Area Based on Circular Economy

Firstly,it is pointed out that circular economy should be vigorously developed in the Nansi Lake Drainage Area,and the connotation of circular economy is expounded.Then,problems in developing circular economy in Nansi Lake Drainage Area are analyzed from the aspects of agriculture,industrial enterprises,and waste utilization.Finally,combining with the four modes of peasant household,enterprise,region and society in the development of circular economy,corresponding countermeasures are put forward for the circular economy in Nansi Lake Drainage Area,such as establishing the government guidance mechanism for big agriculture circular economy in Nansi Lake Drainage Area,constructing incentive systems for industrial enterprises adopting circular economy in Nansi Lake Drainage Area,adjusting the industrial structure of Nansi Lake Drainage Area,and optimizing the energy consumption structure.

Analyses and Modeling of Laminar Flow in Pipes Using Numerical Approach

This paper investigate some important works done on numerical analysis and modeling of laminar flow in pipes. This review is focused on some methods of approach and the analytical tools used in analyzing of the important parameters to be considered in laminar flow;such as frictional losses, heat transfer etc. in laminar flow in pipes of different shapes, and the importance of laminar flow in its areas of applications. Prominent researchers have approached this from different perspectives. Some carried out analysis on the pressure drop as a function of permeability, some worked on friction factor analysis, some discussed heat transfer effects of laminar flow in the entrance region, while some discussed its applications in various industries. Some of these works were done considering a given form of pipe configuration or shape which is circular pipes. Only a few, of the literature reviewed have related their considerations to different forms of pipes. Most consider pipes to be majorly circular in shape, but in industries today some circular pipes have become elliptical in shape due to long time usage of the pipes, which would have contributed to increase in some different forms of losses in the industries. In engineering, efficiency and effectiveness improvement is the major goal, if a research work has been done, considering the important parameters in laminar flow showing their effects on different forms of pipe configuration as a result of pipe deformation due to usage, huge amount of money will be saved. This will show clearly how the efficiency of a given circular pipe has seriously been affected due to deformation, and the level of loss this has resulted to.