Spatiotemporal Differentiation of Urban Spatial Form and Carbon Emissions in Poyang Lake City Group

In response to the inherent requirements of low-carbon land spatial planning in Jiangxi Province and the lack of existing research,this paper explored the mechanism of spatial form elements of Poyang Lake urban agglomeration on urban carbon emissions.Based on generalized linear regression and geographically weighted regression models,this paper analyzed the spatiotemporal distribution characteristics of carbon emissions,the spatiotemporal relationship between urban form index and carbon emissions,and the spatial differentiation of the intensity of dominant factors from 63 county-level administrative units in the Poyang Lake city group from 2005 to 2020.The results showed that:①The carbon emissions of urban agglomerations around Poyang Lake are generally increasing,and the spatial distribution of carbon emissions is characterized by high-value concentration in the middle and low-value agglomeration in pieces;②The main driving factor for the spatial heterogeneity of carbon emissions was the expansion of built-up area;③Improving urban compactness and optimizing urban form could effectively reduce urban carbon emissions.The results showcased the correlation between urban spatial landscape pattern and the spatiotemporal distribution of carbon emissions,which could make the low-carbon land spatial planning in the Poyang Lake city group more reasonable and practical.

Influence of forming process on three-dimensional morphology of TiB_2 particles in Al-Ti-B alloys

A series of Al-Ti-B master alloys were prepared by different preparation routes,and the TiB2 particles in the master alloys were extracted and analyzed.It is found that the forming process has significant influence on the three-dimensional morphology of TiB2 particles.Different preparation routes result in different reaction forms,which accounts for the morphology variation of TiB2 particles.When the Al-Ti-B master alloy is prepared using ＂halide salt＂ route,TiB2 particles exhibit hexagonal platelet morphology and are independent with each other.In addition,the reaction temperature almost does not have influence on the morphology of TiB2 particles.However,TiB2 particles exhibit different morphologies at different reaction temperatures when the master alloys are prepared with Al-3B and Ti sponge.When the master alloy is prepared at 850 ℃,a kind of TiB2 particle agglomeration forms with a size larger than 5 μm.The TiB2 particles change to layered stacking morphology even dendritic morphology with the reaction temperature reaching up to 1200 ℃.

Integration system research and development for three-dimensional laser scanning information visualization in goaf

An integration processing system of three-dimensional laser scanning information visualization in goaf was developed. It is provided with multiple functions, such as laser scanning information management for goaf, cloud data de-noising optimization, construction, display and operation of three-dimensional model, model editing, profile generation, calculation of goaf volume and roof area, Boolean calculation among models and interaction with the third party soft ware. Concerning this system with a concise interface, plentiful data input/output interfaces, it is featured with high integration, simple and convenient operations of applications. According to practice, in addition to being well-adapted, this system is favorably reliable and stable.

Evaluation of Three-dimensional Urban Expansion: A Case Study of Yangzhou City, Jiangsu Province, China

With rapid urban development in China in the last two decades, the three-dimensional(3D) characteristic has been the main feature of urban morphology. However, the vast majority of researches of urban growth have focused on the planar area(two-dimensional(2D)) expansion. Few studies have been conducted from a 3D perspective. In this paper, the 3D urban expansion of the Yangzhou City, Jiangsu Province, China from 2003 to 2012 was evaluated based on Geographical Information System(GIS) tools and high-resolution remote sensing images. Four indices, namely weighted average height of buildings, volume of buildings, 3D expansion intensity and 3D fractal dimension are used to quantify the 3D urban expansion. The weighted average height of buildings and the volume of buildings are used to illustrate the temporal change of the 3D urban morphology, while the other two indices are used to calculate the expansion intensity and the fractal dimension of the 3D urban morphology. The results show that the spatial distribution of the high-rise buildings in Yangzhou has significantly spread and the utilization of the 3D space of Yangzhou has become more efficient and intensive. The methods proposed in this paper laid a foundation for a wide range of study of 3D urban morphology changes.

Study on Distribution Characteristics and Occurrence Form of Soil Fluorine in Sorghum Base of Renhuai City

In order to find out the effects of soil fluorine on ecological environment and crop safety in the sorghum cultivation base of Renhuai City, Guizhou Province, the content and the occurrence forms of soil fluorine and its influencing factors of Maoba Town were investigated and studied. The results showed that the total fluorine content in the soil of the sorghum base ranged from 668.60 to 2 596.80 mg/kg, with an average of 1 483.25 mg/kg, which was 3.10 and 1.85 times of the national soil background value and the average value of the soil in endemic areas, respectively. The spatial distribution of fluorine in the soil of the study area was uneven, and the fluorine content was in the order of Anliang Village>Yangliu Village>Houba Village>Xiongfeng Village. The soil fluorine contents of various forms varied greatly, and the distribution law was as follows: residual state>water soluble state>organically bound state>exchangeable state>Fe/Mn-F state. The residual fluorine content was the highest, accounting for more than 99% of total fluorine content, while the sum of other four forms was less than 1%, with their respective proportions ranging from 0.10% to 0.30%. The content and proportion of available fluorine in water-soluble and exchangeable states were relatively low, which had limited influence on the surrounding water environment and crop safety. The physicochemical properties of soil, such as pH, organic matter, cation exchange capacity and clay particles had a certain influence on the occurrence forms of soil fluorine, thus changing the availability and migration of soil fluorine, which might endanger the ecological environment safety, food safety and human health.

Three-Dimensional Rigid-Plastic FEM Simulation of Bulk Forming Processes with New Contact and Remeshing Techniques

Some techniques such as die surface description, contact judgement algorithm and remeshing are proposed to improve the robustness of the numerical solution. Based on these techniques, a three-dimensional rigid-plastic FEM code has been developed. Isothermal forging process of a cylindrical housing has been simulated. The simulation results show that the given techniques and the FEM code are reasonable and feasible for three-dimensional bulk forming processes.

Diversity and Application of Herbaceous Flowers in Urban Road Greening in Hefei City

In urban road greening,the planting of ground cover flowers is essential,and herbaceous flowers are an important part.Through the investigation on the diversity of herbaceous flowers in urban road green spaces of Hefei City,the types,colors,application frequency and planting of herbaceous flowers in urban road green spaces were statistically analyzed,and the application forms of herbaceous flowers in the road greening of Hefei City were studied.The characteristics and problems of herbaceous flowers in the road greening of Hefei City were found,and some development suggestions were put forward.

Three-Dimensional Prototypes and Evaluation of Their Structure and Form

In order to reveal the appearance of the clothing prototype on the human body,the characteristics of the human body’s structure above the waist section were studied.Based on the experimental data of the fit prototype,three-dimensional prototypes features were comparatively analyzed.And then objectively evaluating the relationship was conducted between the planar structure lines of different prototypes and the human body.The results showed that the prototypes analyzed basically conformed to the size of the human body.However,when they were worn on the human body,there were problems in the structure and forming.The main reason was that the side seam was skewed to different degrees.The results of this study provide reference for many practitioners to choose prototypes.

Diameters and form of skull base foramen ovale measured by three-dimensional spiral CT thin-slice scan in healthy adults

BACKGROUND： The accurate measurements of various data of the bone diameters of foramen ovale of living person can change the methods of puncturing trigeminal gasserian ganglion via foramen ovale for treating trifacial neuralgia from the experience of puncture operator only to puncture by taking the objective data of measurement as the evidence, which is good for improving the accuracy of puncturing trigeminal ganglion and reducing side effects. OBJECTIVE ： To observe the forms of foramen ovales in healthy adults displayed by volume rendering and multi-planar reconstruction after three-dimensional spiral CT thin-slice scan of skull base, and measure the longitudinal diameter and transverse diameter. DESIGN ： A repetitive observation and measurement SETTINGS ： Department of Neurosurgery and Department of Medical Imaging, Foshan Hospital of Traditional Chinese Medicine. PARTICIPANTS： Fifty healthy adults （100 sides）, who were examined with three-dimensional spiral CT scan, were randomly selected from the Department of Medical Imaging, Foshan Hospital of Traditional Chinese Medicine from January 2005 to January 2006, including 26 males and 24 females, aged 25-68 years with an average of 48 years old. They were all informed and agreed with the examination. METHODS ： The subjects were examined with the Philips 16-slice spiral CT-Mx 8000 IDT CT apparatus （Philips Company, Holland）, the scanning ranged from 2 cm below the canthomeatal line to the level of suprasellar cistem. The width of collimator was 0.75 mm, pitch was 0.663; tube current was 350 mA, voltage was 120 kV, resolution was 512×512 matrix; slice thickness of reconstruction was 1 mm, and interval was 0.5 mm. After the three-dimensional spiral CT thin-slice scan of skull base, the image post-processing techniques including volume rendering and multi-planar reconstruction were applied to observe the forms of foramen ovales, and measure the size, longitudinal diameter and transverse diameter of the foramen ovales. The figures of the foramen ovales were drawn with mouse along the boundary of bone porous margin and soft tissue. According to the indications, the diameters were measured with computer to observe the forms of foramen ovales. MAIN OUTCOME MEASURES ： The longitudinal diameter, transverse diameter and form of foramen ovales were observed. RESULTS： All the 50 healthy adults （100 sides） were involved in the analysis of results. （1） It was observed in the volume rendering images that foramen ovales had four forms of oval shape （77 sides）, kidney shape （12 sides）, round shape （7 sides）, ribbon shape （4 sides）. （2） The longitudinal diameters of left and right foramen ovales were （7.67±1.32） and （7.98±1.45） mm, and the transverse diameters were （4.04±0.83）, （4.09±1.07） mm; There was no obvious difference between left and right longitudinal diameters （t = 1.63, P = 0.11 ）, and left and right transverse diameters were close （t = 0.45, P= 0.65）. CONCLUSION ： The non-invasive techniques of volume rendering and multi-planar reconstruction after three-dimensional spiral CT thin-slice scan can clearly display the formand size of foramen ovale in healthy adults.

解读城市形态的三个分支理论——读《Good City Form》有感

通过分析凯文·林奇的《GoodCityForm》 ,概述了城市形态的三个分支理论 ,探讨了决策理论和功能理论的内容 ,并提出几点看法 。

Two-and Three-Dimensional Urban Core Determinants of the Urban Heat Island： A Statistical Approach

There is no doubt that the UHI （urban heat island） is a mounting problem in built-up environments, due to the energy retention by surface dense building materials, leading to increased temperatures, air pollution, and energy consumption. Much of the earlier research on the UHI has used two-dimensional （2-D） information, such as land uses and the distribution of vegetation. In the case of homogeneous land uses, it is possible to predict surface temperatures with reasonable accuracy with 2-D information. However, three-dimensional （3-D） information is necessary to analyze more complex sites, including dense building clusters. In this research, 3-D building geometry information is combined with 2-D urban surface information to examine the relationship between urban characteristics and temperature. The research includes the following stages： （1） estimating urban temperature; （2） developing a 3-D city model; （3） generating geometric parameters; and （4） conducting statistical analyses using both linear and non-linear regression models. The implications of the results are discussed, providing guidelines for policies aiming to reduce the UHI.

The Effects of Building Form on Microclimate and Outdoor Thermal Comfort in a Tropical City

The urban microclimate has direct implications with regards to thermal comfort indoors as well as outdoors. In the tropics, the outdoor thermal comfort conditions during daytime are often far above acceptable comfort standards due to intense solar radiation and high solar elevations. This study aims to know effects of simple and fundamental building forms on microclimate and outdoor thermal comfort in a high dense tropical city, focusing on Dhaka, Bangladesh as a study city. Investigations are carried out on existing area and model areas with modified building forms （in respect of height and shape） on the microclimate as well as on outdoor thermal comfort during daytime in summer. This study has demonstrated that the model using less ground coverage and higher buildings can offer a better thermal climate than the models using maximum ground coverage in a high-density tropical city.

A Comparative Study on the Street Space Form in the Old City of Beijing: A Case Study of Shijia Hutong, the White Stupa Temple Area, and Dashilanr

Urban renewal is one of the important contents of urban development in China. With the gradual progress of urbanization, the renewal of the old city has become the focus of urbanization. This paper analyzed the street space form in the old city, and explored the characteristics of the street space form with a view to exploring streets whose space forms are suitable for the current social development. Based on the field investigation of Shijia Hutong, the White Stupa Temple area, and Dashilanr, the similarities and differences of streets in these areas with different space forms in the old city of Beijing were compared and analyzed, and social and cultural factors expressed in urban space form and the impact of human activities on the street space form were explored in terms of the scale, function, building type, and connection with the outside world. It is hoped that this paper will provide a reference for future renovation of the Old City.

A Study on the Translation of Love in a Fallen City from the Perspective of Three Dimensional Transformation of Eco-Translatology

Love in a Fallen City is one of Eileen Chang’s representative works and translated by Karen Kingsbury.The ecological environment of translation restricts and influences the translator’s choice of translation strategies,methods and techniques in the process of translation.According to the eco-translatology,translation is a transformation from language dimension,culture dimension and communication dimension.This article analyzes the three-dimensional transformation between the source language and the target language in the English version of Love in a Fallen City,and holds that a good translation must be the translator’s effective adaptation to the ecological environment including the source language,the source culture and the target culture.

面向一统的都城规划——再论隋大兴的空间形制建构及其历史意义

隋大兴是在一统全国过程中规划建设的新都城。其营建不仅在于都城空间本身,也包括以都城为核心面向整个疆域的一系列空间建构。本文分析了中国古代“大一统”思想的发展演变以及隋大兴的建设背景,认为隋初围绕大兴城在疆域范围、近畿区域、都城形态三个层面的一系列空间建构是中国古代“大一统”思想与全国一统进程实际需要相结合的空间政治实践,呼应了当时的军事、政治、经济、文化等需求,丰富和发展了“大一统”理念在都城规划中的表达,提高了都城在国家秩序建构和国家认同形成方面的作用,推动了隋唐“大一统”时代的形成和巩固。

新型都市工业:形成原因、内涵特征与发展策略

新型都市工业作为一种产业新形态,是新质生产力的都市空间产业表现。在总结提炼新型都市工业基本内涵的基础上,从产业空间形态、产业行业形态、发展体系、微观运行主体、区域产业属性和区域产业治理方式六个方面阐述了其主要特征。围绕现阶段产城人融合发展态势,我国各级政府应以形成新型都市工业发展共识为基础,重构或调整多种利益关系,重新配置都市工业资源,加快数智化转型,充实高端生产性服务业,加快新型基础设施建设,塑造工业与社区新型关系,推动试点示范。

先秦时期城市形态研究

中国传统城市模式具有深刻的哲学底色和文化内涵,但随着对营城建制的不断关注,主要的研究成果却集中在秦汉及之后的王朝时期,先秦时期城市发展尚未得到重视。该文将先秦城市作为研究目标,致力于探究先秦城市形态发展的整体趋势。先秦城市形态分为对称式和非对称式两种,并分别辨析不同形态出现的具体原因,继而指出两种形态间的关联系时代变化下城市职能转变所致。最后通过对现有城市遗址归纳整理,得出先秦城市形态以对称式为主,非对称式为辅的结论。

先秦丘居形态及其对古代营城理念的影响

本文梳理了“丘”的概念及其五重涵义,用图形化的方式考释了“敦丘”“陶丘”“融丘”和“昆仑丘”四种丘居形态。并由此出发,解析了古代多重城制的成因,择居丘南的缘起,以及地法昆仑的三种方法,以探究丘居形态对古代营城理念的深刻影响。

南京河西鱼嘴核心区城市设计中的一体化形态建构与管控

在新城核心区设计中,如何基于自然与人工资源特征进行形态整合往往是实现集约化开发的重要抓手。而在实施管控的过程中,通常会经历专题论证、实践反馈和动态调整的过程。以南京河西鱼嘴核心区为例,回顾其规划历程,总结其在滨江城市环境形态建构与管控中的关键策略,为当代中国高密度核心区的城市建筑一体化开发提供参考。

ArchIndex:基于多源数据的城市街区检索引擎

城市街区检索引擎是一种城市认知智能,通过整合和呈现多源城市数据,建立城市空间检索模型,从而简化城市设计前期的认知和调研。文章通过动态网页提供城市街区检索引擎ArchIndex,在可定期更新的空间关系数据库的基础上,采集街区实例数据,建立形态、功能、活力三个方面的向量化指标,用于城市街区的检索与可视化。最终方案实现了分布式运行部署,可对任意城市建立索引,用云端计算与网页应用,为城市形态学研究提供了易用的工具和新的方法。