TIMODAZ:A successful international cooperation project to investigate the thermal impact on the EDZ around a radioactive waste disposal in clay host rocks

Disposal of spent nuclear fuel and long lived radioactive waste in deep clay geological formations is one of the promising options worldwide. In this concept of the geological disposal system, the host clay formation is considered as a principal barrier on which the fulfillment of key safety functions rests. Between 2006 and 2010, the European Commission project TIMODAZ, which gathered 15 partners from 8 countries, has investigated the coupled thermo-hydro-mechanical （THM） effects on clay formations for geological disposal of radioactive waste, and specific attention was paid to investigating the thermal effect on the evolution of the damaged zone （DZ）. Three types of potential host clay formations were investigated： the Boom Clay （Belgium）, the Opalinus Clay （Switzerland） and the Callovo-Oxfordian argillite （France）. Intensive experimental （laboratory and in situ in underground research laboratories） and numerical studies have been performed. Multi-scale approach was used in the course of the project. High degree of similarities between the failure modes, sealing process, stress paths, deformation, etc., observed in laboratories and in situ has been obtained, which increased the confidence in the applicability of laboratory test results and up-scaling perspective. The results of the laboratory and in situ tests obtained allowed the parameters for numerical models at various scales to be derived and provided the basis for the simplified performance assessment models that are used to assess the long-term safety of a repository. The good cooperation between the numerical modeler and experimenters has allowed an in-depth analysis of the experimental results and thus better understanding the underlying processes, and consequently increased the capabilities to model the THM effects in claystones. This paper presents the main achievements obtained by TIMODAZ project and shows how a European scientific community investigates a problem of concern in a collaborative way and how the obtained main results are applied to the performance assessment of a geological repository.

Simulations of THM processes in buffer-rock barriers of high-level waste disposal in an argillaceous formation

The main objective of this paper is to investigate and analyse the thermo-hydro-mechanical（THM） coupling phenomena and their influences on the repository safety.In this paper,the high-level waste（HLW） disposal concept in drifts in clay formation with backfilled bentonite buffer is represented numerically using the CODE BRIGHT developed by the Technical University of Catalonia in Barcelona.The parameters of clay and bentonite used in the simulation are determined by laboratory and in situ experiments.The calculation results are presented to show the hydro-mechanical（HM） processes during the operation phase and the THM processes in the after-closure phase.According to the simulation results,the most probable critical processes for the disposal project have been represented and analyzed.The work also provides an input for additional development regarding the design,assessment and validation of the HLW disposal concept.