Biomass energy is an important constituent of the world＇s future sustainable energy source system, but current biomass energy conversion techniques have low efficiency and cause secondary pollution to environment eas...Biomass energy is an important constituent of the world＇s future sustainable energy source system, but current biomass energy conversion techniques have low efficiency and cause secondary pollution to environment easily. Bio-eleetrochemical system （BES） appeared in recent years could realize the clean efficient con- version of biomass energy, and has become a research hotspot in the biomass energy field. In this study, the research and application of BES in biomass energy con- version were overviewed, and the existing problems were analyzed.展开更多
To utilize low rank coal efficiently,a fluidized bed two-stage(FBTS)gasification process,mainly consisting of a FB pyrolyzer and a transport FB(TFB)gasifier,has been proposed for the production of clean fuel gas.To v...To utilize low rank coal efficiently,a fluidized bed two-stage(FBTS)gasification process,mainly consisting of a FB pyrolyzer and a transport FB(TFB)gasifier,has been proposed for the production of clean fuel gas.To verify the feasibility and technical features of this novel gasification technology,a pilot autothermal platform,with a treating capacity of 100 kg/h for coal,was designed and built up.By adopting a kind of lignite from Inner Mongolia,the running state and fuel gas quality were compared systematically under typical operational conditions.The results show that by keeping the reaction temperatures of pyrolyzer and gasifier at around 840C and 1000C,respectively,the corresponding tar content in fuel gas at the outlets of pyrolyzer and gasifier were 1127 mg/Nm3 and 365 mg/Nm3,reaching a high tar removal efficiency.Under the stable operation state,the volume fractions of CO,H2,CH4 and CO2 in fuel gas were 14.4%,8.3%,3.4%and 11.3%,respectively,and the corresponding higher heating value of fuel gas was about 1100 kcal/Nm3.Compared with the tar from pyrolyzer,the heavy oil fraction in tar from gasifier reduced significantly,while the light oil components increased sharply simultaneously,showing significant effect of catalytic reforming by hot char bed on tar removal.展开更多
Lanthanum strontium cobalt ferrite(LSCF)is an appreciable cathode material for solid oxide fuel cells(SOFCs),and it has been widely investigated,owing to its excellent thermal and chemical stability.However,its poor o...Lanthanum strontium cobalt ferrite(LSCF)is an appreciable cathode material for solid oxide fuel cells(SOFCs),and it has been widely investigated,owing to its excellent thermal and chemical stability.However,its poor oxygen reduction reaction(ORR)activity,particularly at a temperature of≤800℃,causes setbacks in achieving a peak power density of>1.0 W·cm^(-2),limiting its application in the commercialization of SOFCs.To improve the ORR of LSCF,doping strategies have been found useful.Herein,the porous tantalum-doped LSCF materials(La_(0.6)Sr_(0.4)Co_(0.4)Fe_(0.5)7Ta_(0.03)O_(3)(LSCFT-0),La_(0.6)Sr_(0.4)Co_(0.4)Fe_(0.5)4Ta0.06O_(3),and La_(0.6)Sr_(0.4)Co_(0.4)Fe_(0.5)Ta0.1O_(3))are prepared via camphor-assisted solid-state reaction(CSSR).The LSCFT-0 material exhibits promising ORR with area-specific resistance(ASR)of 1.260,_(0.5)80,0.260,0.100,and 0.06Ω·cm^(2)at 600,650,700,750,and 800℃,respectively.The performance is about 2 times higher than that of undoped La_(0.6)Sr_(0.4)Co_(0.4)Fe_(0.6)O_(3)with the ASR of 2.515,1.191,_(0.5)96,0.320,and 0.181Ω·cm^(2)from the lowest to the highest temperature.Through material characterization,it was found that the incorporated Ta occupied the B-site of the material,leading to the enhancement of the ORR activity.With the use of LSCFT-0 as the cathode material for anode-supported single-cell,the power density of>1.0 W·cm^(-2)was obtained at a temperature<800℃.The results indicate that the CSSR-derived LSCFT is a promising cathode material for SOFCs.展开更多
基金Supported by a Project of Shandong Higher Educational Science and Technology Program(J16LD03)Doctoral Scientific Research Foundation of Binzhou University(2014Y17)+1 种基金Natural Science Foundation of Shandong Province(ZR2014EEP009)Shandong Key Research and Development Plan(2015GNC111018,2016GSF117021)
文摘Biomass energy is an important constituent of the world＇s future sustainable energy source system, but current biomass energy conversion techniques have low efficiency and cause secondary pollution to environment easily. Bio-eleetrochemical system （BES） appeared in recent years could realize the clean efficient con- version of biomass energy, and has become a research hotspot in the biomass energy field. In this study, the research and application of BES in biomass energy con- version were overviewed, and the existing problems were analyzed.
基金the financial support provide by the National Key Research and Development Program(No.2016YFB0600404-02).
文摘To utilize low rank coal efficiently,a fluidized bed two-stage(FBTS)gasification process,mainly consisting of a FB pyrolyzer and a transport FB(TFB)gasifier,has been proposed for the production of clean fuel gas.To verify the feasibility and technical features of this novel gasification technology,a pilot autothermal platform,with a treating capacity of 100 kg/h for coal,was designed and built up.By adopting a kind of lignite from Inner Mongolia,the running state and fuel gas quality were compared systematically under typical operational conditions.The results show that by keeping the reaction temperatures of pyrolyzer and gasifier at around 840C and 1000C,respectively,the corresponding tar content in fuel gas at the outlets of pyrolyzer and gasifier were 1127 mg/Nm3 and 365 mg/Nm3,reaching a high tar removal efficiency.Under the stable operation state,the volume fractions of CO,H2,CH4 and CO2 in fuel gas were 14.4%,8.3%,3.4%and 11.3%,respectively,and the corresponding higher heating value of fuel gas was about 1100 kcal/Nm3.Compared with the tar from pyrolyzer,the heavy oil fraction in tar from gasifier reduced significantly,while the light oil components increased sharply simultaneously,showing significant effect of catalytic reforming by hot char bed on tar removal.
基金This work is supported by the National Natural Science Foundation of China(No.51975384)Guangdong Basic and Applied Basic Research Foundation(No.2020A1515011547)Shenzhen Fundamental Research Project(Nos.JCYJ20190808144009478,20200731211324001).
文摘Lanthanum strontium cobalt ferrite(LSCF)is an appreciable cathode material for solid oxide fuel cells(SOFCs),and it has been widely investigated,owing to its excellent thermal and chemical stability.However,its poor oxygen reduction reaction(ORR)activity,particularly at a temperature of≤800℃,causes setbacks in achieving a peak power density of>1.0 W·cm^(-2),limiting its application in the commercialization of SOFCs.To improve the ORR of LSCF,doping strategies have been found useful.Herein,the porous tantalum-doped LSCF materials(La_(0.6)Sr_(0.4)Co_(0.4)Fe_(0.5)7Ta_(0.03)O_(3)(LSCFT-0),La_(0.6)Sr_(0.4)Co_(0.4)Fe_(0.5)4Ta0.06O_(3),and La_(0.6)Sr_(0.4)Co_(0.4)Fe_(0.5)Ta0.1O_(3))are prepared via camphor-assisted solid-state reaction(CSSR).The LSCFT-0 material exhibits promising ORR with area-specific resistance(ASR)of 1.260,_(0.5)80,0.260,0.100,and 0.06Ω·cm^(2)at 600,650,700,750,and 800℃,respectively.The performance is about 2 times higher than that of undoped La_(0.6)Sr_(0.4)Co_(0.4)Fe_(0.6)O_(3)with the ASR of 2.515,1.191,_(0.5)96,0.320,and 0.181Ω·cm^(2)from the lowest to the highest temperature.Through material characterization,it was found that the incorporated Ta occupied the B-site of the material,leading to the enhancement of the ORR activity.With the use of LSCFT-0 as the cathode material for anode-supported single-cell,the power density of>1.0 W·cm^(-2)was obtained at a temperature<800℃.The results indicate that the CSSR-derived LSCFT is a promising cathode material for SOFCs.
