We apply the Colour Family Drawing Test, as a development of the traditional black and white test, for cross-cultural comparison. The participants, aged 7 - 10 years, both genders, were examined individually. Each sub...We apply the Colour Family Drawing Test, as a development of the traditional black and white test, for cross-cultural comparison. The participants, aged 7 - 10 years, both genders, were examined individually. Each subject sat at a single table with a white rectangular card of standard size, 24 well-sharpened colour pencils, a black pencil, an eraser and other appropriate tools. S/he received this verbal instruction: “Draw your family”. The procedure was firstly applied to 120 participants attending primary schools of Rome (Biasi, Bonaiuto and Levin, 2014). The families were evaluated through a semi-structural interview conducted with the children’s teachers and divided into: Harmonious versus Very Conflictual Families. The drawings made by children of Harmonious Families consistently used “Reassuring and Playful Colours” (Pink, Orange, Sky Blue, Light Green, Light Yellow, other pastel colours);and were larger, tidier and more proportioned to respect the opposite group. Children belonging to Conflictual Families used mostly “Alarming and Serious Colours” (Grey, Black, Dark Bleu, Violet, Olive Green) and their drawings were less extended, more often disordered and had typical deformations such as figures too thin. A second investigation examined 120 participants belonging to Asian immigrant families residing in Italy. A third investigation examined 120 participants belonging to Russian families of Moscow. Both last two investigations obtained very similar results on the use of colours, and gave a confirmation of the relevance of the Colour Family Drawing Test.展开更多
Current work is focused on the influence of friction in deep drawing process. Friction measurements were also conducted using a modified tribotester based on strip sliding between tools. Four different tool surfaces w...Current work is focused on the influence of friction in deep drawing process. Friction measurements were also conducted using a modified tribotester based on strip sliding between tools. Four different tool surfaces were tested under similar contact conditions regarding contact area, normal pressure, sliding speed, lubricant and surface characteristics to calculate the friction coefficient between the tool surface and a high strength low alloy steel sheet HSLA 380. The results showed that friction coefficient varies over a wide range with different lubricating conditions and different sliding velocities. For some sliding velocities, the coefficient of friction is stable and low, while for others it is unstable and higher. Results of the experiments reveal that this novel tribotester is a very useful tool to evaluate and compare the friction between steel sheet and tool surfaces in alloyed steel for cold working applications. The outcomes have only small dispersion within the different test series, which indicates a stable process with good repeatability. The test method enables comparison of different surface finishes and treatments, lubricants and coatings in terms of friction and galling under conditions similar to those found in sheet metal forming processes. The four different types of surfaces considered for this study were grinded, polished, nitrided and quenched/tempered. The main difference among the tested tools in this work was the surface roughness, which was found to have a strong influence on friction.展开更多
The deformation characteristic of bland in deep drawing is discussed. It is pointed out that the friction and lubrication conditions in for drawing are different from that in mechanical motion or machine work or other...The deformation characteristic of bland in deep drawing is discussed. It is pointed out that the friction and lubrication conditions in for drawing are different from that in mechanical motion or machine work or other plastic process. The common test methods in laboratories are analyzed. It shows that though all those test methods can test the friction coefficient, the probe test method is most suitable for the research of friction and lubrication and the process in deep drawing, for this method is identical with the actual work condition either from the test principle or deformation status of the blank. Last the successful application in the deep drawing simulator newly developed the the probe method are intro- duced in detail.展开更多
Based on the ABAQUS/Explicit finite element method,the forming force changing trend of deep drawing test for 6A16 aluminum alloy plate after pre-aging and storage at room temperature for one month was simulated under ...Based on the ABAQUS/Explicit finite element method,the forming force changing trend of deep drawing test for 6A16 aluminum alloy plate after pre-aging and storage at room temperature for one month was simulated under friction coefficient ranging from 0 to 0.22.The lubricants selected for the tests were mechanical oil,butter and dry film lubricant,and the friction coefficient of these lubricants were 0.05,0.10 and 0.15,respectively.Microstructural evolution of 6 A16 aluminum alloy plate during drawing forming was investigated by OM,SEM and EBSD.The results showed that,with the increase of friction coefficient,the stress,strain and deformation degree in deformation zone increased,while the grain size in deformation zone decreased.Thus,the hardness of the cup-typed component increased with the increase of friction coefficient.Butter-lubricated cups had the highest tensile strength and yield strength after paint-bake cycle.The combination of simulation results and microstructure analysis of 6A16 aluminum alloy plate after drawing forming indicates that the appropriate lubricant is butter.展开更多
Based on the loose medium flow field theory, the loose top-coal drawing law of longwall top-coal caving（LTCC） mining technology is studied by using self-developed three-dimensional（3D） test device. The loose top-c...Based on the loose medium flow field theory, the loose top-coal drawing law of longwall top-coal caving（LTCC） mining technology is studied by using self-developed three-dimensional（3D） test device. The loose top-coal drawing test with shields and the controlled test without shields are performed in the condition without any boundary effect. Test results show that shields will cause reduction in drawing volume of coal in the LTCC mining. The deflection phenomenon of drawing body is also observed in the controlled test, which is verified that the deflection of drawing body is caused by shield. It is found that the deflection angle decreases with increasing caving height, with the maximum value of atailand the minimum value of 0. In addition, the formula to calculate the drawing volume is proposed subsequently.The deflection of drawing body is numerically simulated using particle flow code PFC3 Dand the proposed formula to calculate drawing volume in LTCC is also verified.展开更多
A probe test method was employed to detect the friction condition of the interfaces between tools and blank. At the same time a self-developed measurement apparatus to realize the probe test method was also presented....A probe test method was employed to detect the friction condition of the interfaces between tools and blank. At the same time a self-developed measurement apparatus to realize the probe test method was also presented. Based on the analysis of force, a correlative friction model was also given. With the self-developed measurement apparatus,the effects of three kinds of lubricating oils which were in common use during the process of sheet steel drawing were studied. By probing the friction coefficient values of different lubricating oils during the drawing process of the hot-galvanized sheet steel （steel brand： ST07Zn）, we can see that the friction caused by PK oil was the lowest, so the effect of PK oil was the best. Then PK oil was used as the base lubricating oil and some solid additive powers was added into it to make a new type lubrication （named as L oil）.The result of test proved that the new lubricating oil had remarkable effect on the drawing process of hot-galvanized sheet steel.展开更多
An experimental assessment of the effectiveness of university counselling was conducted through the “Stress Drawing Recall” Technique applied before and after a clinical colloquium with 70 university students of bot...An experimental assessment of the effectiveness of university counselling was conducted through the “Stress Drawing Recall” Technique applied before and after a clinical colloquium with 70 university students of both genders, aged 18 - 35 years, who had requested this service. Another 70 students waiting to undergo the colloquium were interviewed as a control group. Two parallel series of drawings depicting personal stress situations were collected and, after evaluation by three expert judges in “double-blind” conditions, led to establishing five forms of development of the graphic language from the first to second drawing, defined as follows: a) distension, with a reduction in stress indicators and increase in comfort indicators;b) explicit representation of conflict resolution;c) appearance of new elements, with persisting conflict;d) increase in stress indicators;e) invariant or equivalent repetition of the stress drawing. Results showed that students who underwent the clinical colloquium (experimental group) changed their stress drawings mainly in the direction of distension and conflict resolution, while the control group had more invariant or equivalent repetition of the stress situation (?= 62.77;p < 0.001). The events depicted in the stress drawings were divided into three categories: a) limited short-term stressful situations due to mainly external agents;b) externally induced stressful situations with intense emotional resonance;c) wide-ranging long-lasting stressful situations with great involvement of the self. The participants were divided into: a) very anxious subjects;b) averagely anxious subjects;c) not very anxious subjects, on the basis of their scores on two questionnaires: the MPI (1959) and the STAI (1970). There is a correspondence between the subjects’ level of conflict and extension of the depicted stress. This confirms the usefulness of the Stress Drawing Recall Technique in psychological counselling.展开更多
Cerebral palsy is a multiple disability manifested by motor deficits and impairments of cognition, language, and body perception. To assess if body schema and body image distortion in children and youth with cerebral ...Cerebral palsy is a multiple disability manifested by motor deficits and impairments of cognition, language, and body perception. To assess if body schema and body image distortion in children and youth with cerebral palsy can be represented through draw-a-person-test, outcome measure of conscious and subconscious body awareness, visual perception and cognition in two age-matched groups, one with cerebral palsy and other with developmental disability, were collected. The outcome was compared within the two groups and with reference data (healthy population) and correlated with the outcome of draw-a-person test. Decreased scores in the draw-a-person test in subjects with cerebral palsy compared both to subjects with developmental disorders and to healthy population had strongly correlated with decreased scores in visual perception. This suggests that draw-a-person test may provide a preliminary guidance for the assessment of visual perception. No statistically significant effect of cognitive abilities on performance in the draw-a-person test was found. The influence of both conscious and subconscious body awareness on the scores in the draw-a-person test was not significant, which confirms that this test alone is not fully reliable to detect the body schema and body image disorder in cerebral palsy.展开更多
BACKGROUND Efficient detection of delirium and comorbid delirium-dementia is a key diagnostic challenge.Development of new,efficient delirium-focused methods of cognitive assessment is a key challenge for improved det...BACKGROUND Efficient detection of delirium and comorbid delirium-dementia is a key diagnostic challenge.Development of new,efficient delirium-focused methods of cognitive assessment is a key challenge for improved detection of neurocognitive disorders in everyday clinical practice.AIM To compare the accuracy of two novel bedside tests of attention,vigilance and visuospatial function with conventional bedside cognitive tests in identifying delirium in older hospitalized patients.METHODS 180 consecutive elderly medical inpatients(mean age 79.6±7.2;51%female)referred to a psychiatry for later life consultation-liaison service with delirium,dementia,comorbid delirium-dementia and cognitively intact controls.Participants were assessed cross-sectionally with conventional bedside cognitive tests[WORLD,Months Backward test(MBT),Spatial span,Vigilance A and B,Clock Drawing test and Interlocking Pentagons test]and two novel cognitive tests[Lighthouse test,Letter and Shape Drawing test(LSD)-4].RESULTS Neurocognitive diagnoses were delirium(n=44),dementia(n=30),comorbid delirium-dementia(n=60)and no neurocognitive disorder(n=46).All conventional tests had sensitivity of>70%for delirium,with best overall accuracy for the Vigilance-B(78.3%),Vigilance-A(77.8%)and MBT(76.7%)tests.The sustained attention component of the Lighthouse test was the most distinguishing of delirium(sensitivity 84.6%;overall accuracy 75.6%).The LSD-4 had sensitivity of 74.0%and overall accuracy 74.4%for delirium identification.Combining tests allowed for enhanced sensitivity(>90%)and overall accuracy(≥75%)with the highest overall accuracy for the combination of MBT-Vigilance A and the combined Vigilance A and B tests(both 78.3%).When analyses were repeated for those with dementia,there were similar findings with the MBTVigilance A the most accurate overall combination(80.0%).Combining the Lighthouse-SA with the LSD-4,a fail in either test had sensitivity for delirium of 91.4 with overall accuracy of 74.4%.CONCLUSION Bedside tests of attention,vigilance and visuospatial ability can help to distinguish neurocognitive disorders,including delirium,from other presentations.The Lighthouse test and the LSD-4 are novel tests with high accuracy for detecting delirium.展开更多
AIM To investigate psychopathological correlates of child obesity via the Draw-A-Person test(DAP).METHODS The participants were 50 children with a mean age of 9.74 years.Body mass index(BMI) was used as a measure of b...AIM To investigate psychopathological correlates of child obesity via the Draw-A-Person test(DAP).METHODS The participants were 50 children with a mean age of 9.74 years.Body mass index(BMI) was used as a measure of body fat.Children were divided into normal(n = 17),overweight(n = 14) and obese(n = 19).Two qualitative methods of scoring the DAP based on an integrative approach were used to assess self-concept(ESW) and overall level of children's adjustment(EAC).A procedure for judging interpretative skills of clinicians was implemented before they evaluated children's drawings.RESULTS As predicted by our hypothesis,BMI was negatively correlated with ESW,r(50) =-0.29,P < 0.05,but not with EAC,r(50) =-0.08,P = ns.To evaluate the effect of gender,Pearson correlations were re-computedregrouping the sample accordingly:BMI and EAC reached a significant negative correlation in female subjects,r(24) =-0.36,P < 0.05,and a positive correlation in male subjects,r(26) = 0.37,P = < 0.05;negative correlation between BMI and ESW became stronger in females,r(24) =-0.51,P < 0.01 but not in males,whose correlation disappeared resulting not-significant,r(26) =-0.06,P = ns.No effect of age was found.Results indicate that obesity has a negative correlation exclusively on overall adjustment and self-concept in female children.CONCLUSION It was concluded that there is a negative bias toward females that reveals how the stigma of obesity is widespread in Western society.展开更多
A two stage scan architecture is proposed to do low power and low test application cost scan testing. The first stage includes multiple scan chains, where each scan chain is driven by a primary input. Each scan flip-f...A two stage scan architecture is proposed to do low power and low test application cost scan testing. The first stage includes multiple scan chains, where each scan chain is driven by a primary input. Each scan flip-flop in the multiple scan chains drives a group of scan flip-flops. The scan flip-flop in the multiple scan chain and the scan flip-flop driven by it are assigned the same values for all test vectors. Scan flip-flops in the multiple scan chains and those in the second stage use separate clock signals, but the design for testability technqiue needs only one clock. The proposed scan architecture localizes test power consumption to the multiple scan chains during test application. Test signals assigned to scan flip-fiops in the multiple scan chains are applied to the scan flip-flops in the second stage after the test vector has been applied to the multiple scan chains. This technique can make test power consumption very small.展开更多
The developmental maturity (M) scale using the Star-Wave Test that was independently developed by Yalon and Zion indicates poor learning abilities if the M-scale score is low, which may be caused by developmental dela...The developmental maturity (M) scale using the Star-Wave Test that was independently developed by Yalon and Zion indicates poor learning abilities if the M-scale score is low, which may be caused by developmental delays, such as intellectual disability and learning disorder or organic mental disorder. Furthermore, the distress (D) scale is thought to be influenced by mild neurological disorders, hand coordination problems, and environmental factors. In this study, we conducted a Star-Wave Test on 44 nursery school children in Japan and examined the M scale, the D scale, as well as the level of stress induced by coordination problems and the environment. The t-test was conducted on the M scale and D scale of the group without coordination problems and that with coordination problems, and we found a significant difference at 1% level. From this result, we can confirm the relationship of the M scale and the D scale with Visual and motor maturity.展开更多
Among the technological tests, the Erichsen drawing test gives a more appropriate material behavior, near the limit of the real manufactured process. In this paper an inverse finite element analysis of the Erichsen te...Among the technological tests, the Erichsen drawing test gives a more appropriate material behavior, near the limit of the real manufactured process. In this paper an inverse finite element analysis of the Erichsen test is proposed. The new idea is to use a numerical simulation of the experimental test for the rheological identification of the constitutive equations available for sheet metals alloys. The inverse analysis is based on a robust optimization algorithm and uses simultaneously the experimental test data and the corresponding numerical one. A numerical inverse analysis software named OPTPAR was developed and improved for an automatically coupling with a commercial finite element code charged to simulate the experimental test. Results obtained for a virtual steel alloy will be analyzed numerically in order to validate the finite element model and the identification method. An application to an AA5182 aluminum alloy and a DC03 steel alloy will be presented.展开更多
The church bells began to ring. It was a Sunday mor-ning1Janaury. Frau Goldeck was slowly2a cup of hotcoffee in her kitchen.3was fire in the stove, 4it hadnot been lit very5and the room was still6. FrauGoldeck was wea...The church bells began to ring. It was a Sunday mor-ning1Janaury. Frau Goldeck was slowly2a cup of hotcoffee in her kitchen.3was fire in the stove, 4it hadnot been lit very5and the room was still6. FrauGoldeck was wearing heavy woolen clothes.7seconds, shelooked at a clock8on the wall. She was展开更多
文摘We apply the Colour Family Drawing Test, as a development of the traditional black and white test, for cross-cultural comparison. The participants, aged 7 - 10 years, both genders, were examined individually. Each subject sat at a single table with a white rectangular card of standard size, 24 well-sharpened colour pencils, a black pencil, an eraser and other appropriate tools. S/he received this verbal instruction: “Draw your family”. The procedure was firstly applied to 120 participants attending primary schools of Rome (Biasi, Bonaiuto and Levin, 2014). The families were evaluated through a semi-structural interview conducted with the children’s teachers and divided into: Harmonious versus Very Conflictual Families. The drawings made by children of Harmonious Families consistently used “Reassuring and Playful Colours” (Pink, Orange, Sky Blue, Light Green, Light Yellow, other pastel colours);and were larger, tidier and more proportioned to respect the opposite group. Children belonging to Conflictual Families used mostly “Alarming and Serious Colours” (Grey, Black, Dark Bleu, Violet, Olive Green) and their drawings were less extended, more often disordered and had typical deformations such as figures too thin. A second investigation examined 120 participants belonging to Asian immigrant families residing in Italy. A third investigation examined 120 participants belonging to Russian families of Moscow. Both last two investigations obtained very similar results on the use of colours, and gave a confirmation of the relevance of the Colour Family Drawing Test.
文摘Current work is focused on the influence of friction in deep drawing process. Friction measurements were also conducted using a modified tribotester based on strip sliding between tools. Four different tool surfaces were tested under similar contact conditions regarding contact area, normal pressure, sliding speed, lubricant and surface characteristics to calculate the friction coefficient between the tool surface and a high strength low alloy steel sheet HSLA 380. The results showed that friction coefficient varies over a wide range with different lubricating conditions and different sliding velocities. For some sliding velocities, the coefficient of friction is stable and low, while for others it is unstable and higher. Results of the experiments reveal that this novel tribotester is a very useful tool to evaluate and compare the friction between steel sheet and tool surfaces in alloyed steel for cold working applications. The outcomes have only small dispersion within the different test series, which indicates a stable process with good repeatability. The test method enables comparison of different surface finishes and treatments, lubricants and coatings in terms of friction and galling under conditions similar to those found in sheet metal forming processes. The four different types of surfaces considered for this study were grinded, polished, nitrided and quenched/tempered. The main difference among the tested tools in this work was the surface roughness, which was found to have a strong influence on friction.
文摘The deformation characteristic of bland in deep drawing is discussed. It is pointed out that the friction and lubrication conditions in for drawing are different from that in mechanical motion or machine work or other plastic process. The common test methods in laboratories are analyzed. It shows that though all those test methods can test the friction coefficient, the probe test method is most suitable for the research of friction and lubrication and the process in deep drawing, for this method is identical with the actual work condition either from the test principle or deformation status of the blank. Last the successful application in the deep drawing simulator newly developed the the probe method are intro- duced in detail.
基金Funded by the National Key Research and Development Program of China(No.2016YFB0300805).
文摘Based on the ABAQUS/Explicit finite element method,the forming force changing trend of deep drawing test for 6A16 aluminum alloy plate after pre-aging and storage at room temperature for one month was simulated under friction coefficient ranging from 0 to 0.22.The lubricants selected for the tests were mechanical oil,butter and dry film lubricant,and the friction coefficient of these lubricants were 0.05,0.10 and 0.15,respectively.Microstructural evolution of 6 A16 aluminum alloy plate during drawing forming was investigated by OM,SEM and EBSD.The results showed that,with the increase of friction coefficient,the stress,strain and deformation degree in deformation zone increased,while the grain size in deformation zone decreased.Thus,the hardness of the cup-typed component increased with the increase of friction coefficient.Butter-lubricated cups had the highest tensile strength and yield strength after paint-bake cycle.The combination of simulation results and microstructure analysis of 6A16 aluminum alloy plate after drawing forming indicates that the appropriate lubricant is butter.
基金financially supported by the Coal Joint Funds of the National Natural Science Foundation of China(No.U1361209)the National Basic Research Program of China(973 Program)(No.2013CB227903)
文摘Based on the loose medium flow field theory, the loose top-coal drawing law of longwall top-coal caving（LTCC） mining technology is studied by using self-developed three-dimensional（3D） test device. The loose top-coal drawing test with shields and the controlled test without shields are performed in the condition without any boundary effect. Test results show that shields will cause reduction in drawing volume of coal in the LTCC mining. The deflection phenomenon of drawing body is also observed in the controlled test, which is verified that the deflection of drawing body is caused by shield. It is found that the deflection angle decreases with increasing caving height, with the maximum value of atailand the minimum value of 0. In addition, the formula to calculate the drawing volume is proposed subsequently.The deflection of drawing body is numerically simulated using particle flow code PFC3 Dand the proposed formula to calculate drawing volume in LTCC is also verified.
文摘A probe test method was employed to detect the friction condition of the interfaces between tools and blank. At the same time a self-developed measurement apparatus to realize the probe test method was also presented. Based on the analysis of force, a correlative friction model was also given. With the self-developed measurement apparatus,the effects of three kinds of lubricating oils which were in common use during the process of sheet steel drawing were studied. By probing the friction coefficient values of different lubricating oils during the drawing process of the hot-galvanized sheet steel （steel brand： ST07Zn）, we can see that the friction caused by PK oil was the lowest, so the effect of PK oil was the best. Then PK oil was used as the base lubricating oil and some solid additive powers was added into it to make a new type lubrication （named as L oil）.The result of test proved that the new lubricating oil had remarkable effect on the drawing process of hot-galvanized sheet steel.
文摘An experimental assessment of the effectiveness of university counselling was conducted through the “Stress Drawing Recall” Technique applied before and after a clinical colloquium with 70 university students of both genders, aged 18 - 35 years, who had requested this service. Another 70 students waiting to undergo the colloquium were interviewed as a control group. Two parallel series of drawings depicting personal stress situations were collected and, after evaluation by three expert judges in “double-blind” conditions, led to establishing five forms of development of the graphic language from the first to second drawing, defined as follows: a) distension, with a reduction in stress indicators and increase in comfort indicators;b) explicit representation of conflict resolution;c) appearance of new elements, with persisting conflict;d) increase in stress indicators;e) invariant or equivalent repetition of the stress drawing. Results showed that students who underwent the clinical colloquium (experimental group) changed their stress drawings mainly in the direction of distension and conflict resolution, while the control group had more invariant or equivalent repetition of the stress situation (?= 62.77;p < 0.001). The events depicted in the stress drawings were divided into three categories: a) limited short-term stressful situations due to mainly external agents;b) externally induced stressful situations with intense emotional resonance;c) wide-ranging long-lasting stressful situations with great involvement of the self. The participants were divided into: a) very anxious subjects;b) averagely anxious subjects;c) not very anxious subjects, on the basis of their scores on two questionnaires: the MPI (1959) and the STAI (1970). There is a correspondence between the subjects’ level of conflict and extension of the depicted stress. This confirms the usefulness of the Stress Drawing Recall Technique in psychological counselling.
文摘Cerebral palsy is a multiple disability manifested by motor deficits and impairments of cognition, language, and body perception. To assess if body schema and body image distortion in children and youth with cerebral palsy can be represented through draw-a-person-test, outcome measure of conscious and subconscious body awareness, visual perception and cognition in two age-matched groups, one with cerebral palsy and other with developmental disability, were collected. The outcome was compared within the two groups and with reference data (healthy population) and correlated with the outcome of draw-a-person test. Decreased scores in the draw-a-person test in subjects with cerebral palsy compared both to subjects with developmental disorders and to healthy population had strongly correlated with decreased scores in visual perception. This suggests that draw-a-person test may provide a preliminary guidance for the assessment of visual perception. No statistically significant effect of cognitive abilities on performance in the draw-a-person test was found. The influence of both conscious and subconscious body awareness on the scores in the draw-a-person test was not significant, which confirms that this test alone is not fully reliable to detect the body schema and body image disorder in cerebral palsy.
基金This work was supported by a research project grant from the Health Research Board(HRA 2011/48).
文摘BACKGROUND Efficient detection of delirium and comorbid delirium-dementia is a key diagnostic challenge.Development of new,efficient delirium-focused methods of cognitive assessment is a key challenge for improved detection of neurocognitive disorders in everyday clinical practice.AIM To compare the accuracy of two novel bedside tests of attention,vigilance and visuospatial function with conventional bedside cognitive tests in identifying delirium in older hospitalized patients.METHODS 180 consecutive elderly medical inpatients(mean age 79.6±7.2;51%female)referred to a psychiatry for later life consultation-liaison service with delirium,dementia,comorbid delirium-dementia and cognitively intact controls.Participants were assessed cross-sectionally with conventional bedside cognitive tests[WORLD,Months Backward test(MBT),Spatial span,Vigilance A and B,Clock Drawing test and Interlocking Pentagons test]and two novel cognitive tests[Lighthouse test,Letter and Shape Drawing test(LSD)-4].RESULTS Neurocognitive diagnoses were delirium(n=44),dementia(n=30),comorbid delirium-dementia(n=60)and no neurocognitive disorder(n=46).All conventional tests had sensitivity of>70%for delirium,with best overall accuracy for the Vigilance-B(78.3%),Vigilance-A(77.8%)and MBT(76.7%)tests.The sustained attention component of the Lighthouse test was the most distinguishing of delirium(sensitivity 84.6%;overall accuracy 75.6%).The LSD-4 had sensitivity of 74.0%and overall accuracy 74.4%for delirium identification.Combining tests allowed for enhanced sensitivity(>90%)and overall accuracy(≥75%)with the highest overall accuracy for the combination of MBT-Vigilance A and the combined Vigilance A and B tests(both 78.3%).When analyses were repeated for those with dementia,there were similar findings with the MBTVigilance A the most accurate overall combination(80.0%).Combining the Lighthouse-SA with the LSD-4,a fail in either test had sensitivity for delirium of 91.4 with overall accuracy of 74.4%.CONCLUSION Bedside tests of attention,vigilance and visuospatial ability can help to distinguish neurocognitive disorders,including delirium,from other presentations.The Lighthouse test and the LSD-4 are novel tests with high accuracy for detecting delirium.
文摘AIM To investigate psychopathological correlates of child obesity via the Draw-A-Person test(DAP).METHODS The participants were 50 children with a mean age of 9.74 years.Body mass index(BMI) was used as a measure of body fat.Children were divided into normal(n = 17),overweight(n = 14) and obese(n = 19).Two qualitative methods of scoring the DAP based on an integrative approach were used to assess self-concept(ESW) and overall level of children's adjustment(EAC).A procedure for judging interpretative skills of clinicians was implemented before they evaluated children's drawings.RESULTS As predicted by our hypothesis,BMI was negatively correlated with ESW,r(50) =-0.29,P < 0.05,but not with EAC,r(50) =-0.08,P = ns.To evaluate the effect of gender,Pearson correlations were re-computedregrouping the sample accordingly:BMI and EAC reached a significant negative correlation in female subjects,r(24) =-0.36,P < 0.05,and a positive correlation in male subjects,r(26) = 0.37,P = < 0.05;negative correlation between BMI and ESW became stronger in females,r(24) =-0.51,P < 0.01 but not in males,whose correlation disappeared resulting not-significant,r(26) =-0.06,P = ns.No effect of age was found.Results indicate that obesity has a negative correlation exclusively on overall adjustment and self-concept in female children.CONCLUSION It was concluded that there is a negative bias toward females that reveals how the stigma of obesity is widespread in Western society.
基金This workis supported in part by JSPS under grant L03540and the National Science Foundation of China under grant60373009
文摘A two stage scan architecture is proposed to do low power and low test application cost scan testing. The first stage includes multiple scan chains, where each scan chain is driven by a primary input. Each scan flip-flop in the multiple scan chains drives a group of scan flip-flops. The scan flip-flop in the multiple scan chain and the scan flip-flop driven by it are assigned the same values for all test vectors. Scan flip-flops in the multiple scan chains and those in the second stage use separate clock signals, but the design for testability technqiue needs only one clock. The proposed scan architecture localizes test power consumption to the multiple scan chains during test application. Test signals assigned to scan flip-fiops in the multiple scan chains are applied to the scan flip-flops in the second stage after the test vector has been applied to the multiple scan chains. This technique can make test power consumption very small.
文摘The developmental maturity (M) scale using the Star-Wave Test that was independently developed by Yalon and Zion indicates poor learning abilities if the M-scale score is low, which may be caused by developmental delays, such as intellectual disability and learning disorder or organic mental disorder. Furthermore, the distress (D) scale is thought to be influenced by mild neurological disorders, hand coordination problems, and environmental factors. In this study, we conducted a Star-Wave Test on 44 nursery school children in Japan and examined the M scale, the D scale, as well as the level of stress induced by coordination problems and the environment. The t-test was conducted on the M scale and D scale of the group without coordination problems and that with coordination problems, and we found a significant difference at 1% level. From this result, we can confirm the relationship of the M scale and the D scale with Visual and motor maturity.
文摘Among the technological tests, the Erichsen drawing test gives a more appropriate material behavior, near the limit of the real manufactured process. In this paper an inverse finite element analysis of the Erichsen test is proposed. The new idea is to use a numerical simulation of the experimental test for the rheological identification of the constitutive equations available for sheet metals alloys. The inverse analysis is based on a robust optimization algorithm and uses simultaneously the experimental test data and the corresponding numerical one. A numerical inverse analysis software named OPTPAR was developed and improved for an automatically coupling with a commercial finite element code charged to simulate the experimental test. Results obtained for a virtual steel alloy will be analyzed numerically in order to validate the finite element model and the identification method. An application to an AA5182 aluminum alloy and a DC03 steel alloy will be presented.
文摘The church bells began to ring. It was a Sunday mor-ning1Janaury. Frau Goldeck was slowly2a cup of hotcoffee in her kitchen.3was fire in the stove, 4it hadnot been lit very5and the room was still6. FrauGoldeck was wearing heavy woolen clothes.7seconds, shelooked at a clock8on the wall. She was
