Experimental,Numerical,and Analytical Studies on the Bending of Mechanically Lined Pipe

Mechanically lined pipe(MLP)is often used for offshore oil and gas transport because of its low cost and corrosion resistance.During installation and operation,the pipe may undergo severe bending deformation,which causes the liner to separate from the outer pipe and buckles,affecting the stability of the whole line.In this paper,the buckling response of MLP subjected to bending is investigated to clarify its bending characteristics by employing both experiments,numerical simulation,as theoretical methods.Two types of MLPs were manufactured with GB 45 carbon steel(SLP)and Al 6061(ALP)used as the outer pipe material,respectively.The hydraulic expansion and bending experiments of small-scale MLPs are conducted.In addition to the ovalized shape of the cross-section for the SLP specimens,the copper liner was found to wrinkle on the compressive side.In contrast,the liner of ALP remains intact without developing any wrinkling and collapse mode.In addition,a dedicated numerical framework and theoretical models were also established.It was found both the manufacturing and bending responses of the MLP can be well reproduced,and the predicted maximum moment and critical curvatures are in good agreement with the experimental results.

Canine Myofascial Kinetic Lines: A Descriptive Dissection Study Including Related Function and Locomotion and Comparison of the Human and Equine Myofascial Kinetic Lines

Aim: This dissection study was conducted to verify if the Myofascial kinetic lines, outlined in detail in humans and recently documented in horses, were present in dogs. These dynamic lines present rows of interconnected muscles, myofascia and other fascia structures, which influence the biomechanics of the spine and limbs. Methods: Forty-two dogs of different breeds and genders were dissected, imaged, and videoed. Results: Similar kinetic lines were verified in the dog, as described in humans and horses, and additionally, three new branches of the lines were discovered. The kinetic lines described were three superficial lines: Dorsal, Ventral, and Lateral, which all started in the hindlimb and ended in the temporal and occipital regions. These lines act respectively in spinal extension, flexion, and lateral flexion. Three profound lines, which started in the tail and ended in the head. The Deep Dorsal Line followed the transversospinal myofascia. The Deep Ventral Line showed an additional start deep in the medial hind limb, continued in the hypaxial myofascia, and enveloped all the viscera. Also, the Deep Lateral Line started in the hindlimb but parted along the trunk in the deep lateral myofascial structures. Two helical lines crossed the midline two or three times and served to rotate the spine. The Functional Line established a sling from the axilla to the contralateral stifle and presented a new ipsilateral branch. The Spiral Line connected the head and the ipsilateral tarsus and additionally presented a new straight branch. The four front limb lines describe their motion: the Front Limb Protraction and Retraction, Adduction, and Abduction Lines. Conclusion: The canine lines mirrored the equine and human lines with exceptions due to differences in anatomy, foot posture, lumbosacral flexibility, and their biomechanical constitution as predator versus prey animals. Additionally, three new canine branches were verified and described.

Toward a Direct Measurement of the Cosmic Acceleration:The Pilot Observation of HI 21 cm Absorption Line at FAST

This study presents results on detecting neutral atomic hydrogen(H I)21 cm absorption in the spectrum of PKS PKS1413+13 at redshift z=0.24670041.The observation was conducted by FAST,with a spectral resolution of10 Hz,using 10 minutes of observing time.The global spectral profile is examined by modeling the absorption line using a single Gaussian function with a resolution of 10 kHz within a 2 MHz bandwidth.The goal is to determine the rate of the latest cosmic acceleration by directly measuring the redshift evolution of the H I 21 cm absorption line with Hubble flow toward a common background quasar over a decade or longer time span.This will serve as a detectable signal generated by the accelerated expansion of the Universe at redshift z<1,referred to as redshift drift z(5)or the SL effect.The measured H I gas column density in this DLA system is approximately equivalent to the initial observation value,considering uncertainties of the spin temperature of a spiral host galaxy.The high signal-to-noise ratio of 57,obtained at a 10 kHz resolution,strongly supports the feasibility of using the H I 21 cm absorption line in DLA systems to accurately measure the redshift drift rate at a precision level of around 10~(-10)per decade.

Derivative Spectroscopy and its Application at Detecting the Weak Emission/Absorption Lines

The development of spectroscopic survey telescopes like Large Sky Area Multi-Object Fiber Spectroscopic Telescope(LAMOST),Apache Point Observatory Galactic Evolution Experiment and Sloan Digital Sky Survey has opened up unprecedented opportunities for stellar classification.Specific types of stars,such as early-type emission-line stars and those with stellar winds,can be distinguished by the profiles of their spectral lines.In this paper,we introduce a method based on derivative spectroscopy(DS)designed to detect signals within complex backgrounds and provide a preliminary estimation of curve profiles.This method exhibits a unique advantage in identifying weak signals and unusual spectral line profiles when compared to other popular line detection methods.We validated our approach using synthesis spectra,demonstrating that DS can detect emission signals three times fainter than Gaussian fitting.Furthermore,we applied our method to 579,680 co-added spectra from LAMOST Medium-Resolution Spectroscopic Survey,identifying 16,629 spectra with emission peaks around the Hαline from 10,963 stars.These spectra were classified into three distinct morphological groups,resulting in nine subclasses as follows.(1)Emission peak above the pseudo-continuum line(single peak,double peaks,emission peak situated within an absorption line,P Cygni profile,Inverse P Cygni profile);(2)Emission peak below the pseudo-continuum line(sharp emission peak,double absorption peaks,emission peak shifted to one side of the absorption line);(3)Emission peak between the pseudo-continuum line.

Petrology of Spinel-Lherzolite Xenoliths from Mazéléand Others Northen Xenoliths Localities of Cameroon Volcanic Line: Exchange Reactions and Equilibrium State

The alkaline volcanism of the Cameroon Volcanic Line in its northern domain has raised many fresh enclaves of peridotites. The samples selected come from five (05) different localities (Liri, in the plateau of Kapsiki, Mazélé in the NE of Ngaoundéré, Tello and Ganguiré in the SE of Ngaoundéré and Likok, locality located in the west of Ngaoundé). The peridotite enclaves of the above localities show restricted mineralogical variation. Most are four-phase spinel-lherzolites, indicating that this is the main lithology that forms the lithospheric mantle below the shallow zone. No traces of garnet or primary plagioclase were detected, which strongly limits the depth range from which the rock fragments were sampled. The textures and the wide equilibrium temperatures (884˚C - 1115˚C) indicate also entrainment of lherzolite xenoliths from shallow depths within the lithosphere and the presence of mantle diapirism. The exchange reactions and equilibrium state established in this work make it possible to characterize the chemical composition of the upper mantle of each region and test the equilibrium state of the phases between them. Variations of major oxides and incompatible elemental concentrations in clinopyroxene indicate a primary control by partial melting. The absence of typical “metasomatic” minerals, low equilibration temperatures and enriched LREE patterns indicate that the upper mantle below septentrional crust of Cameroun underwent an event of cryptic metasomatic enrichment prior to partial melting. The distinctive chemical features, LREE enrichment, strong U, Ce and Pr, depletion relative to Ba, Nb, La, Pb, and T, fractionation of Zr and Hf and therefore ligh high Zr/Hf ratio, low La/Yb, Nb/La and Ti/Eu are all results of interaction of refractory peridotite residues with carbonatite melts.

Evaluation of red soil-bentonite mixtures for compacted clay liners

Compacted clay liners are an integral part of the waste landfills,which are provided to contain the leachate within the landfills and protect the surrounding environment.Generally,locally available natural soils are used for the construction of compacted clay liners if they satisfy the design criteria.However,not all soils in their natural state satisfy all the design criteria for the liner materials.Thus,there is a definite need to modify the locally available natural soils by blending with bentonite to meet the required design criteria for the liners.In view of this,the present study evaluates the suitability of an Indian red soil enhanced with bentonite as a liner material.To achieve this,a series of experiments were carried out using locally available red soil and bentonite.First,the suitability of the red soil was evaluated as a liner material.The experimental results showed that the red soil met all the selection criteria stipulated by the Environmental Protection Agencies(EPAs)for the liners except the hydraulic conductivity criterion.Therefore,the red soil was mixed with bentonite contents of 10%,20%and 30%,and the red soil-bentonite mixtures were evaluated for their suitability for liners in their compacted state.Further,as the liners in the arid and semi-arid regions are subjected to moisture variations due to seasonal moisture fluctuations and other factors,the red soil-bentonite mixtures were subjected to wetdry cycles,and their suitability was evaluated after wet-dry cycles.The experimental results revealed that all the red soil-bentonite mixtures met the stipulated EPA criteria for the liners in the as-compacted state.However,the red soil-bentonite mixtures with 20%and 30%bentonite contents only satisfied the hydraulic conductivity requirement even after wet-dry cycles.The experimental findings were supplemented with the microstructural insights captured through digital camera images,scanning electron microscopy(SEM),and mercury intrusion porosimetry(MIP)studies.

Establishment and characterization of a canine chondrosarcoma cell line:Mango

In the global progress of bone tumor research,established stable and long-lasting transgenic chondrosarcoma(CSA)cell lines are rare,mainly of murine and human origin,while the establishment of canine CSA cell lines has yet to be reported.This study established a canine CSA cell line to facilitate the basic clinical study of canine CSA.Fifty fve cases of canine osteolytic disease were collected,and more than 10 bone tumor samples from dogs with typical clinical signs were used for primary cell culture.A cell line with stable passaging for more than 100 generations and mouse tumorigenic ability was successfully cultured.According to the clinical characteristics of the dog and the histopathological results of the primary tumor,CSA was diagnosed,and the CSA cell line was designated Mango.Immunohistochemical(IHC)results showed that the immunoreactivity of bone gamma-carboxyglutamate protein(BGLAP),secreted protein acidic and rich in cysteine(SPARC),alkaline phosphatase(ALPL),vimentin(VIM)and S100 were positive.However,the immunoreactivity of pan-cytokeratin(PCK),chromogranin A(CGA),and platelet endothelial cell adhesion molecule-1(CD31)was negative.Immunofuorescence(IF)results showed that the protein expressions in the Mango cell line were consistent with the IHC identifcation of the primary tumor.The Mango cell line’s doubling time was 43.92 h,and the cell formation rate exceeded 20%.There were abnormal chromosome numbers,hetero staining with toluidine blue,and certain calcifcation abilities.It could be passaged stably and continuously without changing the cell morphology and characteristics.In vivo,the cells were successfully injected into the nude mice model with a tumorigenic rate of 100%.The immunophenotype of the xenograft tumor was consistent with that of the primary tumor.Therefore,we efectively established a canine CSA cell line.As a promising cell material,this cell line can be used to construct a tumor-bearing model conducive to the subsequent basic research of canine CSA.Moreover,because of its similarity to human CSA,the animal model of CSA is also indispensable for investigating human CSA.

Characterization of the infectivity of an Indonesian Zika virus strain in mammalian cell lines

Objective:To characterize the infection patterns and growth characteristics of the Zika virus(ZIKV)strain JMB-185 from Indonesia in various mammalian cell lines.Methods:ZIKV was grown in human(A549,HEK293,HepG2,Huh7,Jurkat,and THP-1)and non-human mammalian(RAW264.7,Vero,and Vero76)cell lines.Viral replication kinetics were measured using plaque assay,while intra-and extracellular viral RNA concentrations were assessed using RT-PCR.Flow cytometry was used to quantify the infected cells and cell viability was measured using an MTT assay.The ability of ZIKV to infect cell lines was visualized using a fluorescence immunostaining assay.Results:This ZIKV strain preferentially infected the lung,kidney,and liver cell lines A549,HEK293,Huh7,Vero,and Vero76,but not the immune cells Jurkat,RAW264.7,and THP-1.By contrast,the ZIKV showed no sign of infection in HepG2 cells,while maintaining viral titer over 3 days post-infection,with no infection recorded in immunostaining,no increase in viral RNA,and no indication of cell deterioration.Conclusions:The Indonesian ZIKV strain has a similar infection profile as other strains,except for its poor infectivity on HepG2 cells.Information on the growth characteristics of Indonesia ZIKV will help expand our understanding of the biology of ZIKV which will be useful for various applications including antiviral discovery.

An Implementation of Multiscale Line Detection and Mathematical Morphology for Efficient and Precise Blood Vessel Segmentation in Fundus Images

Diagnosing various diseases such as glaucoma,age-related macular degeneration,cardiovascular conditions,and diabetic retinopathy involves segmenting retinal blood vessels.The task is particularly challenging when dealing with color fundus images due to issues like non-uniformillumination,low contrast,and variations in vessel appearance,especially in the presence of different pathologies.Furthermore,the speed of the retinal vessel segmentation system is of utmost importance.With the surge of now available big data,the speed of the algorithm becomes increasingly important,carrying almost equivalent weightage to the accuracy of the algorithm.To address these challenges,we present a novel approach for retinal vessel segmentation,leveraging efficient and robust techniques based on multiscale line detection and mathematical morphology.Our algorithm’s performance is evaluated on two publicly available datasets,namely the Digital Retinal Images for Vessel Extraction dataset(DRIVE)and the Structure Analysis of Retina(STARE)dataset.The experimental results demonstrate the effectiveness of our method,withmean accuracy values of 0.9467 forDRIVE and 0.9535 for STARE datasets,aswell as sensitivity values of 0.6952 forDRIVE and 0.6809 for STARE datasets.Notably,our algorithmexhibits competitive performance with state-of-the-art methods.Importantly,it operates at an average speed of 3.73 s per image for DRIVE and 3.75 s for STARE datasets.It is worth noting that these results were achieved using Matlab scripts containing multiple loops.This suggests that the processing time can be further reduced by replacing loops with vectorization.Thus the proposed algorithm can be deployed in real time applications.In summary,our proposed system strikes a fine balance between swift computation and accuracy that is on par with the best available methods in the field.

ST-LaneNet: Lane Line Detection Method Based on Swin Transformer and LaneNet

The advancement of autonomous driving heavily relies on the ability to accurate lane lines detection.As deep learning and computer vision technologies evolve,a variety of deep learning-based methods for lane line detection have been proposed by researchers in the field.However,owing to the simple appearance of lane lines and the lack of distinctive features,it is easy for other objects with similar local appearances to interfere with the process of detecting lane lines.The precision of lane line detection is limited by the unpredictable quantity and diversity of lane lines.To address the aforementioned challenges,we propose a novel deep learning approach for lane line detection.This method leverages the Swin Transformer in conjunction with LaneNet(called ST-LaneNet).The experience results showed that the true positive detection rate can reach 97.53%for easy lanes and 96.83%for difficult lanes(such as scenes with severe occlusion and extreme lighting conditions),which can better accomplish the objective of detecting lane lines.In 1000 detection samples,the average detection accuracy can reach 97.83%,the average inference time per image can reach 17.8 ms,and the average number of frames per second can reach 64.8 Hz.The programming scripts and associated models for this project can be accessed openly at the following GitHub repository:https://github.com/Duane 711/Lane-line-detec tion-ST-LaneNet.

On traceable iterated line graph and hamiltonian path index

Xiong and Liu[21]gave a characterization of the graphs G for which the n-iterated line graph L^(n)(G)is hamiltonian,for n≥2.In this paper,we study the existence of a hamiltonian path in L^(n)(G),and give a characterization of G for which L^(n)(G)has a hamiltonian path.As applications,we use this characterization to give several upper bounds on the hamiltonian path index of a graph.

Imaging of human parafoveal area with large field of view in adaptive optics line scanning ophthalmoscope

The parafoveal area,with its high concentration of photoreceptors andfine retinal capillaries,is crucial for central vision and often exhibits early signs of pathological changes.The current adaptive optics scanning laser ophthalmoscope(AOSLO)provides an excellent tool to acquire accurate and detailed information about the parafoveal area with cellular resolution.However,limited by the scanning speed of two-dimensional scanning,thefield of view(FOV)in the AOSLO system was usually less than or equal to 2,and the stitching for the parafoveal area required dozens of images,which was time-consuming and laborious.Unfortunately,almost half of patients are unable to obtain stitched images because of their poorfixation.To solve this problem,we integrate AO technology with the line-scan imaging method to build an adaptive optics line scanning ophthalmoscope(AOLSO)system with a larger FOV.In the AOLSO,afocal spherical mirrors in pairs are nonplanar arranged and the distance and angle between optical elements are optimized to minimize the aberrations,two cylinder lenses are orthogonally placed before the imaging sensor to stretch the point spread function(PSF)for su±ciently digitizing light energy.Captured human retinal images show the whole parafoveal area with 55FOV,60 Hz frame rate and cellular resolutions.Take advantage of the 5FOV of the AOLSO,only 9 frames of the retina are captured with several minutes to stitch a montage image with an FOV of 99,in which photoreceptor counting is performed within approximately 5eccentricity.The AOLSO system not only provides cellular resolution but also has the capability to capture the parafoveal region in a single frame,which offers great potential for noninvasive studying of the parafoveal area.

Learning Epipolar Line Window Attention for Stereo Image Super-Resolution Reconstruction

Transformer-based stereo image super-resolution reconstruction(Stereo SR)methods have significantly improved image quality.However,existing methods have deficiencies in paying attention to detailed features and do not consider the offset of pixels along the epipolar lines in complementary views when integrating stereo information.To address these challenges,this paper introduces a novel epipolar line window attention stereo image super-resolution network(EWASSR).For detail feature restoration,we design a feature extractor based on Transformer and convolutional neural network(CNN),which consists of(shifted)window-based self-attention((S)W-MSA)and feature distillation and enhancement blocks(FDEB).This combination effectively solves the problem of global image perception and local feature attention and captures more discriminative high-frequency features of the image.Furthermore,to address the problem of offset of complementary pixels in stereo images,we propose an epipolar line window attention(EWA)mechanism,which divides windows along the epipolar direction to promote efficient matching of shifted pixels,even in pixel smooth areas.More accurate pixel matching can be achieved using adjacent pixels in the window as a reference.Extensive experiments demonstrate that our EWASSR can reconstruct more realistic detailed features.Comparative quantitative results show that in the experimental results of our EWASSR on the Middlebury and Flickr1024 data sets for 2×SR,compared with the recent network,the Peak signal-to-noise ratio(PSNR)increased by 0.37 dB and 0.34 dB,respectively.

FAST Observations of Four Comets to Search for the Molecular Line Emissions between 1.0 and 1.5 GHz Frequencies

We used the Five-hundred-meter Aperture Spherical radio Telescope(FAST)to search for the molecular emissions in the L-band between 1.0 and 1.5 GHz toward four comets,C/2020 F3(NEOWISE),C/2020 R4(ATLAS),C/2021 A1(Leonard),and 67P/Churyumov-Gerasimenko during or after their perihelion passages.Thousands of molecular transition lines fall in this low-frequency range,many attributed to complex organic or prebiotic molecules.We conducted a blind search for the possible molecular lines in this frequency range in those comets and could not identify clear signals of molecular emissions in the data.Although several molecules have been detected at high frequencies of greater than100 GHz in comets,our results confirm that it is challenging to detect molecular transitions in the L-band frequency ranges.The non-detection of L-band molecular lines in the cometary environment could rule out the possibility of unusually strong lines,which could be caused by the masers or non-LTE effects.Although the line strengths are predicted to be weak,for FAST,using the ultra-wide bandwidth receiver and improving the radio frequency interference environments would enhance the detectability of those molecular transitions at low frequencies in the future.

Optimizing profile line interval for enhanced accuracy in rock joint morphology and shear strength assessments

2D profile lines play a critical role in cost-effectively evaluating rock joint properties and shear strength.However, the interval(ΔI_(L)) between these lines significantly impacts roughness and shear strength assessments. A detailed study of 45 joint samples using four statistical measures across 500 different ΔI_(L)values identified a clear line interval effect with two stages: stable and fluctuation-discrete.Further statistical analysis showed a linear relationship between the error bounds of four parameters,shear strength evaluation, and their corresponding maximum ΔI_(L)values, where the gradient k of this linear relationship was influenced by the basic friction angle and normal stress. Accounting for these factors,lower-limit linear models were employed to determine the optimal ΔI_(L)values that met error tolerances(1%–10%) for all metrics and shear strength. The study also explored the consistent size effect on joints regardless of ΔI_(L)changes, revealing three types of size effects based on morphological heterogeneity.Notably, larger joints required generally higher ΔI_(L)to maintain the predefined error limits, suggesting an increased interval for large joint analyses. Consequently, this research provides a basis for determining the optimal ΔI_(L), improving accuracy in 2D profile line assessments of joint characteristics.

A Simple and Effective Surface Defect Detection Method of Power Line Insulators for Difficult Small Objects

Insulator defect detection plays a vital role in maintaining the secure operation of power systems.To address the issues of the difficulty of detecting small objects and missing objects due to the small scale,variable scale,and fuzzy edge morphology of insulator defects,we construct an insulator dataset with 1600 samples containing flashovers and breakages.Then a simple and effective surface defect detection method of power line insulators for difficult small objects is proposed.Firstly,a high-resolution featuremap is introduced and a small object prediction layer is added so that the model can detect tiny objects.Secondly,a simplified adaptive spatial feature fusion(SASFF)module is introduced to perform cross-scale spatial fusion to improve adaptability to variable multi-scale features.Finally,we propose an enhanced deformable attention mechanism(EDAM)module.By integrating a gating activation function,the model is further inspired to learn a small number of critical sampling points near reference points.And the module can improve the perception of object morphology.The experimental results indicate that concerning the dataset of flashover and breakage defects,this method improves the performance of YOLOv5,YOLOv7,and YOLOv8.In practical application,it can simply and effectively improve the precision of power line insulator defect detection and reduce missing detection for difficult small objects.

Analysis of mechanical strengths of extreme line casing joint considering geometric, material, and contact nonlinearities

To address the challenges associated with difficult casing running,limited annular space,and poor cementing quality in the completion of ultra-deep wells,the extreme line casing offers an effective solution over conventional casings.However,due to its smaller size,the joint strength of extreme line casing is reduced,which may cause failure when running in the hole.To address this issue,this study focuses on the CST-ZTΦ139.7 mm×7.72 mm extreme line casing and employs the elastic-plastic mechanics to establish a comprehensive analysis of the casing joint,taking into account the influence of geometric and material nonlinearities.A finite element model is developed to analyze the forces and deformations of the extreme line casing joint under axial tension and external collapse load.The model investigates the stress distribution of each thread tooth subjected to various tensile forces and external pressures.Additionally,the tensile strength and crushing strength of the extreme line casing joint are determined through both analytical and experimental approaches.The findings reveal that,under axial tensile load,the bearing surface of each thread tooth experiences uneven stress,with relatively high equivalent stress at the root of each thread tooth.The end thread teeth are valuable spots for failure.It is observed that the critical fracture axial load of thread decreases linearly with the increase of thread tooth sequence.Under external pressure,the circumferential stress is highest at the small end of the external thread,leading to yield deformation.The tensile strength of the joint obtained from the finite element model exhibits a relative error of less than 7%compared to the analytical and experimental values,proving the reliability of the finite element model.The tensile strength of the joint is 3091.9 k N.Moreover,in terms of anti-collapse capability,the joints demonstrate higher resistance to collapse compared to the casing body,which is consistent with the test results where the pipe body experiences collapse and failure while the joints remain intact during the experiment.The failure load of the casing body under external collapse pressure is 87.4 MPa.The present study provides a basic understanding of the mechanical strengths of extreme line casing joint.

Polar-coordinate line-projection light-curing continuous 3D printing for tubular structures

3D printing techniques offer an effective method in fabricating complex radially multi-material structures.However,it is challenging for complex and delicate radially multi-material model geometries without supporting structures,such as tissue vessels and tubular graft,among others.In this work,we tackle these challenges by developing a polar digital light processing technique which uses a rod as the printing platform.The 3D model fabrication is accomplished through line projection.The rotation and translation of the rod are synchronized to project and illuminate the photosensitive material volume.By controlling the distance between the rod and the printing window,we achieved the printing of tubular structures with a minimum wall thickness as thin as 50 micrometers.By controlling the width of fine slits at the printing window,we achieved the printing of structures with a minimum feature size of 10 micrometers.Our process accomplished the fabrication of thin-walled tubular graft structure with a thickness of only 100 micrometers and lengths of several centimeters within a timeframe of just 100 s.Additionally,it enables the printing of axial multi-material structures,thereby achieving adjustable mechanical strength.This method is conducive to rapid customization of tubular grafts and the manufacturing of tubular components in fields such as dentistry,aerospace,and more.

Rigidity Symmetry Line for Thermodynamic Fluid Equations-of-State

We report progress towards a modern scientific description of thermodynamic properties of fluids following the discovery (in 2012) of a coexisting critical density hiatus and a supercritical mesophase defined by percolation transitions. The state functions density ρ(p,T), and Gibbs energy G(p,T), of fluids, e.g. CO2, H2O and argon exhibit a symmetry characterised by the rigidity, ω = (dp/dρ)T, between gaseous and liquid states along any isotherm from critical (Tc) to Boyle (TB) temperatures, on either side of the supercritical mesophase. Here, using experimental data for fluid argon, we investigate the low-density cluster physics description of an ideal dilute gas that obeys Dalton’s partial pressure law. Cluster expansions in powers of density relate to a supercritical liquid-phase rigidity symmetry (RS) line (ω = ρrs(T) = RT) to gas phase virial coefficients. We show that it is continuous in all derivatives, linear within stable fluid phase, and relates analytically to the Boyle-work line (BW) (w = (p/ρ)T = RT), and to percolation lines of gas (PB) and liquid (PA) phases by: ρBW(T) = 2ρPA(T) = 3ρPB(T) = 3ρRS(T)/2 for T TB. These simple relationships arise, because the higher virial coefficients (bn, n ≥ 4) cancel due to clustering equilibria, or become negligible at all temperatures (0 T TB) within the gas phase. The Boyle-work line (p/ρBW)T is related exactly at lower densities as T → TB, and accurately for liquid densities, by ρBW(T) = −(b2/b3)T. The RS line, ω(T) = RT, defines a new liquid-density ground-state physical constant (ρRS(0) = (2/3)ρBW(0) for argon). Given the gas-liquid rigidity symmetry, the entire thermodynamic state functions below TB are obtainable from b2(T). A BW-line ground-state crystal density ρBW(0) can be defined by the pair potential minimum. The Ar2 pair potential, ∅ij(rij) determines b2(T) analytically for all T. This report, therefore, advances the salient objective of liquid-state theory: an argon p(ρ,T) Equation-of-state is obtained from ∅ij(rij) for all fluid states, without any adjustable parameters.

Evolution Mechanism of a Severe Squall Line Triggered by the Coupling of a Sea Breeze Front and a Gust Front

In the present study, a severe squall line(SL) was analyzed by using intensive observational surface data and radar monitoring products. In this process, mesoscale convergence lines, such as the sea breeze front(SBF), gust front and dry line, served as the main triggering and strengthening factors. The transition from convection triggering to the formation of the initial shape was mainly affected by the convergence line of the SBF, which combined with thermal convection to form the main parts of the SL. In the later stage, the convergence line of the gust front merged with other convergence lines to form a series of strong convective cells. The SBF had good indicative significance in terms of severe convective weather warnings. The suitable conditions of heat, water vapor and vertical wind shear on the Shandong Peninsula were beneficial to the maintenance of the SL. Before SL occurrence, tropopause folding strengthened, which consequently enhanced the baroclinic property in the middle and upper troposphere. The high sensible heat flux at the surface easily produced a positive potential vorticity anomaly in the low layer, resulting in convective instability, which was conducive to the maintenance of these processes. In the system, when precipitation particles passed through the unsaturated air layer, they underwent strong evaporation, melting or sublimation, and the cooling effect formed negative buoyancy, which accelerated the sinking of the air and promoted the sustained development of the surface gale. Together with the development of lowlevel mesocyclones, the air pressure decreased rapidly, which was conducive to gale initiation.