A new flux-based hybrid subcell-remapping algorithm for staggered multimaterial arbitrary Lagrangian-Eulerian (MMALE) methods is presented. This new method is an effective generalization of the original subcell-remapp...A new flux-based hybrid subcell-remapping algorithm for staggered multimaterial arbitrary Lagrangian-Eulerian (MMALE) methods is presented. This new method is an effective generalization of the original subcell-remapping method to the multi-material regime (LOUBERE, R. and SHASHKOV,M. A subcell remapping method on staggered polygonal grids for arbitrary-Lagrangian-Eulerian methods. Journal of Computational Physics, 209, 105–138 (2005)). A complete remapping procedure of all fluid quantities is described detailedly in this paper. In the pure material regions, remapping of mass and internal energy is performed by using the original subcell-remapping method. In the regions near the material interfaces, remapping of mass and internal energy is performed with the intersection-based fluxes where intersections are performed between the swept regions and pure material polygons in the Lagrangian mesh, and an approximate approach is then introduced for constructing the subcell mass fluxes. In remapping of the subcell momentum, the mass fluxes are used to construct the momentum fluxes by multiplying a reconstructed velocity in the swept region. The nodal velocity is then conservatively recovered. Some numerical examples simulated in the full MMALE regime and several purely cyclic remapping examples are presented to prove the properties of the remapping method.展开更多
The ERA-Interim reanalysis wind based on the distance-weighted average remapping for studying the wind circulation in Nigeria is presented. The wind flow using this atmospheric model simulation is studied for identifi...The ERA-Interim reanalysis wind based on the distance-weighted average remapping for studying the wind circulation in Nigeria is presented. The wind flow using this atmospheric model simulation is studied for identification of grid-tie electrification opportunities in different wind locations. A 10-year reanalysis wind speed components at a surface level of the planetary layer at 0.25° × 0.25° spatial resolution is obtained and remapped into a new horizontal wind field at a grid resolution of 0.125° × 0.125° covering longitudinal and latitudinal directions of 3.0 - 15.0°E and 15.0 - 3.0°N, respectively. Using the distance-weighted average technique, the remapped wind field at a new grid resolution of 0.125° × 0.125° is compared at different terrain elevations and approximated close to the actual wind field of the same resolution. To determine the suitability of the prevailing wind for small-scale energy conversion, the magnitude of wind flow across the remapped wind field is studied for a 10-year period. Analysis shows that northern regions of Nigeria have a fair wind potential for a stand-alone application based on the wind flow originated at Gulf of Guinea as well as Chad and Niger. Furthermore, hourly surface wind speed observations from 18 synoptic stations in Nigeria are obtained and compared with the bilinear interpolated wind stations. The reanalysis wind reflects the surface wind observations and proves that the prevailing wind in Nigeria is higher than the reanalysis wind projection obtained from gridded data at resolution of 0.125° × 0.125°. The sectorwise wind directions at each synoptic stations for a period of 10 years are presented.展开更多
A two-stage automatic key frame selection method is proposed to enhance stitching speed and quality for UAV aerial videos. In the first stage, to reduce redundancy, the overlapping rate of the UAV aerial video sequenc...A two-stage automatic key frame selection method is proposed to enhance stitching speed and quality for UAV aerial videos. In the first stage, to reduce redundancy, the overlapping rate of the UAV aerial video sequence within the sampling period is calculated. Lagrange interpolation is used to fit the overlapping rate curve of the sequence. An empirical threshold for the overlapping rate is then applied to filter candidate key frames from the sequence. In the second stage, the principle of minimizing remapping spots is used to dynamically adjust and determine the final key frame close to the candidate key frames. Comparative experiments show that the proposed method significantly improves stitching speed and accuracy by more than 40%.展开更多
A high sensitive optical amplitude modulation magnetometer is investigated and demonstrated experimentally. We build an experimental platform for the atomic magnetometer and configure it as a Bell-Bloom magnetometer w...A high sensitive optical amplitude modulation magnetometer is investigated and demonstrated experimentally. We build an experimental platform for the atomic magnetometer and configure it as a Bell-Bloom magnetometer with amplitude modulation of 50% duty cycle square waveform. The open-loop input-output model is deduced from the Bloch equation and is verified experimentally. Instead of locking the frequency by using a voltage control oscillator, we realize a closed loop using the coils to generate a feedback field which avoids the stringent require- ment of a high resolution frequency meter and markedly expands the dynamic range as well as the bandwidth. We realize an open loop sensitivity of 0.8pT/Hz1/2 at 20 Hz using a single light beam, which exceeds that of the state-of-the-art Bell-Bloom magnetometers, and the corresponding closed loop sensitivity is 1.2 pT/Hz1/2.展开更多
基金Project supported by the China Postdoctoral Science Foundation(No.2017M610823)
文摘A new flux-based hybrid subcell-remapping algorithm for staggered multimaterial arbitrary Lagrangian-Eulerian (MMALE) methods is presented. This new method is an effective generalization of the original subcell-remapping method to the multi-material regime (LOUBERE, R. and SHASHKOV,M. A subcell remapping method on staggered polygonal grids for arbitrary-Lagrangian-Eulerian methods. Journal of Computational Physics, 209, 105–138 (2005)). A complete remapping procedure of all fluid quantities is described detailedly in this paper. In the pure material regions, remapping of mass and internal energy is performed by using the original subcell-remapping method. In the regions near the material interfaces, remapping of mass and internal energy is performed with the intersection-based fluxes where intersections are performed between the swept regions and pure material polygons in the Lagrangian mesh, and an approximate approach is then introduced for constructing the subcell mass fluxes. In remapping of the subcell momentum, the mass fluxes are used to construct the momentum fluxes by multiplying a reconstructed velocity in the swept region. The nodal velocity is then conservatively recovered. Some numerical examples simulated in the full MMALE regime and several purely cyclic remapping examples are presented to prove the properties of the remapping method.
文摘The ERA-Interim reanalysis wind based on the distance-weighted average remapping for studying the wind circulation in Nigeria is presented. The wind flow using this atmospheric model simulation is studied for identification of grid-tie electrification opportunities in different wind locations. A 10-year reanalysis wind speed components at a surface level of the planetary layer at 0.25° × 0.25° spatial resolution is obtained and remapped into a new horizontal wind field at a grid resolution of 0.125° × 0.125° covering longitudinal and latitudinal directions of 3.0 - 15.0°E and 15.0 - 3.0°N, respectively. Using the distance-weighted average technique, the remapped wind field at a new grid resolution of 0.125° × 0.125° is compared at different terrain elevations and approximated close to the actual wind field of the same resolution. To determine the suitability of the prevailing wind for small-scale energy conversion, the magnitude of wind flow across the remapped wind field is studied for a 10-year period. Analysis shows that northern regions of Nigeria have a fair wind potential for a stand-alone application based on the wind flow originated at Gulf of Guinea as well as Chad and Niger. Furthermore, hourly surface wind speed observations from 18 synoptic stations in Nigeria are obtained and compared with the bilinear interpolated wind stations. The reanalysis wind reflects the surface wind observations and proves that the prevailing wind in Nigeria is higher than the reanalysis wind projection obtained from gridded data at resolution of 0.125° × 0.125°. The sectorwise wind directions at each synoptic stations for a period of 10 years are presented.
文摘A two-stage automatic key frame selection method is proposed to enhance stitching speed and quality for UAV aerial videos. In the first stage, to reduce redundancy, the overlapping rate of the UAV aerial video sequence within the sampling period is calculated. Lagrange interpolation is used to fit the overlapping rate curve of the sequence. An empirical threshold for the overlapping rate is then applied to filter candidate key frames from the sequence. In the second stage, the principle of minimizing remapping spots is used to dynamically adjust and determine the final key frame close to the candidate key frames. Comparative experiments show that the proposed method significantly improves stitching speed and accuracy by more than 40%.
基金Supported by the National Natural Science Foundation of China under Grant Nos 61273067 and 61074171the National Basic Research Program of China under Grant No 2012CB934104
文摘A high sensitive optical amplitude modulation magnetometer is investigated and demonstrated experimentally. We build an experimental platform for the atomic magnetometer and configure it as a Bell-Bloom magnetometer with amplitude modulation of 50% duty cycle square waveform. The open-loop input-output model is deduced from the Bloch equation and is verified experimentally. Instead of locking the frequency by using a voltage control oscillator, we realize a closed loop using the coils to generate a feedback field which avoids the stringent require- ment of a high resolution frequency meter and markedly expands the dynamic range as well as the bandwidth. We realize an open loop sensitivity of 0.8pT/Hz1/2 at 20 Hz using a single light beam, which exceeds that of the state-of-the-art Bell-Bloom magnetometers, and the corresponding closed loop sensitivity is 1.2 pT/Hz1/2.
