A wireless solution for greenhouse monitoring and control system based on ZigBee technology

With the rapid development of wireless technologies, it is possible for Chinese greenhouses to be equipped with wireless sensor networks due to their low-cost, simplicity and mobility. In the current study, we compared the advantages of ZigBee with other two similar wireless networking protocols, Wi-Fi and Bluetooth, and proposed a wireless solution for green- house monitoring and control system based on ZigBee technology. As an explorative application of ZigBee technology in Chinese greenhouse, it may promote Chinese protected agriculture.

Underground ground control monitoring and interpretation,and numerical modeling, and shield capacity design

Mine or longwall panel layout is a 3D structure with highly non-uniform stress distribution. Recognition of such fact will facilitate underground problem identification/investigation and solving by numerical modeling through proper model construction. Due to its versatility, numerical modeling is the most popular method for ground control design and problem solving. However numerical modeling results require highly experienced professionals to interpret its validity/applicability to actual mining operations due to complicated mining and geological conditions. Underground ground control monitoring is routinely performed to predict roof behavior such as weighting and weighting interval without matching observation of face mining condition while the mining pressures are being monitored, resulting in unrealistic interpretation of the obtained data on mining pressure. The importance of ground control pressure monitoring and simultaneous observation of mining and geological conditions is illustrated by an example of shield leg pressure monitoring and interpretation in an U.S. longwall coal mine: it was found that the roof strata act like a plate, not an individual block of the size of a shield dimension, as commonly assumed by all researchers and shield capacity is not a fixed property for a longwall panel or a mine or a coal seam. A new mechanism on the interaction between shield's hydraulic leg pressure and roof strata for shield loading is proposed.

Performance Monitoring and Diagnosis of Multivariable Model Predictive Control Using Statistical Analysis

A statistic-based benchmark was proposed for performance assessment and monitoring of model predic- tive control; the benchmark was straightforward and achievable by recording a set of output data only when the control performance was good according to the user’s selection. Principal component model was built and an auto- regressive moving average filter was identified to monitor the performance; an improved T2 statistic was selected as the performance monitor index. When performance changes were detected, diagnosis was done by model validation using recursive analysis and generalized likelihood ratio (GLR) method. This distinguished the fact that the per- formance change was due to plant model mismatch or due to disturbance term. Simulation was done about a heavy oil fractionator system and good results were obtained. The diagnosis result was helpful for the operator to improve the system performance.

Multivariate Statistical Process Monitoring and Control: Recent Developments and Applications to Chemical Industry

Multivariate statistical process monitoring and control (MSPM&C) methods for chemical process monitoring with statistical projection techniques such as principal component analysis (PCA) and partial least squares (PLS) are surveyed in this paper. The four-step procedure of performing MSPM&C for chemical process, modeling of processes, detecting abnormal events or faults, identifying the variable(s) responsible for the faults and diagnosing the source cause for the abnormal behavior, is analyzed. Several main research directions of MSPM&C reported in the literature are discussed, such as multi-way principal component analysis (MPCA) for batch process, statistical monitoring and control for nonlinear process, dynamic PCA and dynamic PLS, and on-line quality control by inferential models. Industrial applications of MSPM&C to several typical chemical processes, such as chemical reactor, distillation column, polymerization process, petroleum refinery units, are summarized. Finally, some concluding remarks and future considerations are made.

Research on Remote Monitoring and Fault Diagnosis Technology of Numerical Control Machine

Based on the internet technology,it has become possible to complete remote monitoring and fault diagnosis for the numerical control machine.In order to capture the micro-shock signal induced by the incipient fault on the rotating parts,the reso- nance demodulation technology is utilized in the system.As a subsystem of the remote monitoring system,the embedded data acquisi- tion instrument not only integrates the demodulation board but also complete the collection and preprocess of monitoring data from different machines.Furthermore,through connecting to the internet,the data can be transferred to the remote diagnosis center and data reading and writing function can be finished in the database.At the same time,the problem of the IP address floating in the dial-up of web server is solved by the dynamic DNS technology.Finally,the remote diagnosis software developed on the Lab VIEW platform can analyze the monitoring data from manufacturing field.The research results have indicated that the equipment status can be monitored by the system effectively.

A hierarchical architecture of centralized monitoring and controlling system and its high-performance and interoperability protocol

This paper describes a hierarchical architecture and a high-performance and interoperability protocol for centralized monitoring and controlling systems (CMCS) . The protocol we proposed can interoperate different monitoring and controlling systems constructed by different companies, each with different functions and communication protocols. The protocol reduces the amount of traffic and has real-time and high-perfor-mance advantages. The protocol was implemented in CMCS for telecommunication power supply and air-condi-tioner used by the Telecommunication Bureau of Zhejiang Province. This paper deals with the hierarchical architecture and function of CMCS and packet format, command ID, and SDL description of its protocol. We also discuss the properties of the interoperability and performance of the protocol in this paper.

Mechanism,prevention,and control of mining-induced dynamic disasters in underground metal mines in China:Challenges and solutions

Metal mineral resources play an indispensable role in the development of the national economy.Dynamic disasters in underground metal mines seriously threaten mining safety,which are major scientific and technological problems to be solved urgently.In this article,the occurrence status and grand challenges of some typical dynamic disasters involving roof falling,spalling,collapse,large deformation,rockburst,surface subsidence,and water inrush in metal mines in China are systematically presented,the characteristics of mining-induced dynamic disasters are analyzed,the examples of dynamic disasters occurring in some metal mines in China are summarized,the occurrence mechanism,monitoring and early warning methods,and prevention and control techniques of these disasters are highlighted,and some new opinions,suggestions,and solutions are proposed simultaneously.Moreover,some shortcomings in current disaster research are pointed out,and the direction of efforts to improve the prevention and control level of dynamic disasters in China’s metal mines in the future is prospected.The integration of forward-looking key innovative theories and technologies in the abovementioned aspects will greatly enhance the cognitive level of disaster prevention and mitigation in China’s metal mining industry and achieve a significant shift from passive disaster relief to active disaster prevention.

A Multi-Interface Remote Monitoring and Control System Architecture Based on Embedded Server

This paper presents a multi-interface embedded server architecture for remote real-time monitoring system and distributed monitoring applications. In the scheme,an embedded microprocessor( LPC3250 from NXP) is chosen as the CPU of the embedded server with a linux operation system( OS) environment. The embedded server provides multiple interfaces for supporting various application scenarios. The whole network is based on local area network and adopts the Browser / Server( B / S) model. The monitoring and control node is as a browser endpoint and the remote node with an embedded server is as a server endpoint. Users can easily acquire various sensors information through writing Internet protocol address of remote node on the computer browser. Compared with client / server( C / S) mode,B / S model needs less maintain and can be applicable to large user group. In addition,a simple network management protocol( SNMP) is used for management of devices in Internet protocol( IP) networks. The results of the demonstration experiment show that the proposed system gives good support to manage the network from different user terminals and allows the users to better interact with the ambient environment.

Utilising continuous glucose monitoring for glycemic control in diabetic kidney disease

In this editorial,we comment on the article by Zhang et al.Chronic kidney disease(CKD)presents a significant challenge in managing glycemic control,especially in diabetic patients with diabetic kidney disease undergoing dialysis or kidney transplantation.Conventional markers like glycated haemoglobin(HbA1c)may not accurately reflect glycemic fluctuations in these populations due to factors such as anaemia and kidney dysfunction.This comprehensive review discusses the limitations of HbA1c and explores alternative methods,such as continuous glucose monitoring(CGM)in CKD patients.CGM emerges as a promising technology offering real-time or retrospective glucose concentration measure-ments and overcoming the limitations of HbA1c.Key studies demonstrate the utility of CGM in different CKD settings,including hemodialysis and peritoneal dialysis patients,as well as kidney transplant recipients.Despite challenges like sensor accuracy fluctuation,CGM proves valuable in monitoring glycemic trends and mitigating the risk of hypo-and hyperglycemia,to which CKD patients are prone.The review also addresses the limitations of CGM in CKD patients,emphasizing the need for further research to optimize its utilization in clinical practice.Altogether,this review advocates for integrating CGM into managing glycemia in CKD patients,highlighting its superiority over traditional markers and urging clinicians to consider CGM a valuable tool in their armamentarium.

A HybridManufacturing ProcessMonitoringMethod Using Stacked Gated Recurrent Unit and Random Forest

This study proposed a new real-time manufacturing process monitoring method to monitor and detect process shifts in manufacturing operations.Since real-time production process monitoring is critical in today’s smart manufacturing.The more robust the monitoring model,the more reliable a process is to be under control.In the past,many researchers have developed real-time monitoring methods to detect process shifts early.However,thesemethods have limitations in detecting process shifts as quickly as possible and handling various data volumes and varieties.In this paper,a robust monitoring model combining Gated Recurrent Unit(GRU)and Random Forest(RF)with Real-Time Contrast(RTC)called GRU-RF-RTC was proposed to detect process shifts rapidly.The effectiveness of the proposed GRU-RF-RTC model is first evaluated using multivariate normal and nonnormal distribution datasets.Then,to prove the applicability of the proposed model in a realmanufacturing setting,the model was evaluated using real-world normal and non-normal problems.The results demonstrate that the proposed GRU-RF-RTC outperforms other methods in detecting process shifts quickly with the lowest average out-of-control run length(ARL1)in all synthesis and real-world problems under normal and non-normal cases.The experiment results on real-world problems highlight the significance of the proposed GRU-RF-RTC model in modern manufacturing process monitoring applications.The result reveals that the proposed method improves the shift detection capability by 42.14%in normal and 43.64%in gamma distribution problems.

Gas concentration monitoring system for small and medium-sized coal mines based on gas-sensing detection and single-chip control

This paper is aimed at the actual conditions of disaster caused by gas in small and medium-sized coal mines. A new gas concentration monitoring system for coal mines is developed on the basis of gas-sensing detection and single-chip control. The monitoring system uses the tin oxide as the main material of N-type semiconductor gas sensors, be- cause it has good sensitive characteristics for the flammable and explosive gas （ such as methane, carbon monoxide）. The QM-N5-semiconductor gas sensor is adopted to detect the output values of the resistance under the different gas con- centrations. The system, designedly, takes the AT89C51 digital chip as the core of the circuit processing hardware structure to analyze and judge the input values of the resistance, and then achieve the control and alarm for going beyond the limit of gas concentration. The gas concentration monitoring system has man）, advantages including simple in struc- ture, fast response time, stable performance and low cost. Thus, it can be widely used to monitor gas concentration and provide early wamings in small and medium-sized coal mines.

Oscillatory Failure Detection for Flight Control System Using Voting and Comparing Monitors

Oscillatory failure cases(OFC)detection in the fly-by-wire(FBW)flight control system for civil aircraft is addressed in this paper.First,OFC is ranked four levels:Handling quality,static load,global structure fatigue and local fatigue,according to their respect impact on aircraft.Second,we present voting and comparing monitors based on un-similarity redundancy commands to detect OFC.Third,the associated performances,the thresholds and the counters of the monitors are calculated by the high fidelity nonlinear aircraft models.Finally,the monitors of OFC are verified by the Iron Bird Platform with real parameters of the flight control system.The results show that our approach can detect OFC rapidly.

Monitoring and control technology of solar photovoltaic power generation system

In view of characteristics of solar photovoltaic (PV) power station such as the decentralized layout and massive monitoring and control information, a solar PV power generation monitoring and control system has been designed. The system is designed into three layers namely the sensor and actuator layer, the PLC field monitoring and control layer and the remote network monitoring and control layer. Through ZigBee wireless network, PROFIBUS and GPRS wireless network, the system makes the three layers exchange information rapidly, and the system supervises not only various operational parameters of the power generating system but also weather changes as a way to change the solar tracking strategy of the PV power generating system and reduce the operating energy consumption of the system. Through the hardware redundant design of PLC central controller and the upper computer, the solar PV power station can be more secure and reliable when running.

CONTROLLING AND MONITORING THERMOTE NICAL PARAMETERS OF GLASS MELTING FURNACE

According to the characteristics of the ther-motechnical parameters such as temperature pressure and glass level for glass melting furnace, the design method for monitoring and controlling these parameters is introduced in this paper based on MACROMAX-2 concentrated and dis-tributedcontrol system. The configuration of management information and control loop is described, and research tests were performed to check the functions of system.

Development and experience in the monitoring,assessment and control of environmentalpollutants in Hong Kong

The late start of environmental protection in Hong Kong was discussed in the light of problems encountered during the development of environmental protection legislation in Hong Kong for the past 20 years. The collaboration in monitoring and assessment of environmental pollutants between the University of Hong Kong and various governments were descrbed in parallel with the progress in environmental protection in Hong Kong. The developments of new analytical techniques for environmental monitoring and analysis is given and their application in environmental control described. The joint projects in assessment and control of environmental pollutants carried out in collaboration with local industries and other organizations within and without the university are given and discussed. The problems and possible solution facing Hong Kong in development control equipment for small scale industries are discussed and areas of development identified. The development and experience in the monitoring assessment and control of environmental pollutants in Hong Kong are summarized and areas of difficulties are illustrated.

Application of ArtificialNeural Network to Real-Time Condition Monitoring Control and Usual Trouble Diagnosis during Driling

ＡｐｐｌｉｃａｔｉｏｎｏｆＡｒｔｉｆｉｃｉａｌＮｅｕｒａｌＮｅｔｗｏｒｋｔｏＲｅａｌ┐ＴｉｍｅＣｏｎｄｉｔｉｏｎＭｏｎｉｔｏｒｉｎｇＣｏｎｔｒｏｌａｎｄＵｓｕａｌＴｒｏｕｂｌｅＤｉａｇｎｏｓｉｓｄｕｒｉｎｇＤｒｉｌｉｎｇ＊ＳｈｉＹｕｓｈｅｎｇＤｅｐａ...

Integration Between Enterprise Process Monitoring and Controlling System and Enterprise Application

The relationships and the features of integration between Enterprise ProcessMonitoring and Controlling System (EPMCS) and Enterprise Process Related Applications (EPRA) wereanalyzed. An integration architecture centered on EPMCS was presented, in which there were fourlayers to connect from EPMCS to EPRA: EPMCS, application integration layer, transport layer andEPRA, and there were four layers used to etstablish integration: presentation layer, function layer,data layer and system layer. The frameworks to connect EPMCS and EPRA were designed, thatEnterprise-Independent Model (EIM), Enterprise-Specific Model (ESM) and meta-model to describe thesetwo models were defined. The method to integrate data based on XML was designed to exchange datafrom EPMCS to EPRA according to the mapping between EIM and ESM. The approches are suitable forintegrating EPMCS and systems in Product Data Management (PDM), project management and enterprisebusiness management.

Dynamic Monitoring and Control Measures of Spodoptera frugiperda(J.E.Smmith) in Low Latitude Plateau Sugarcane Areas

Spodoptera frugiperda (J.E.Smmith) is one of the major migratory pests warned by the Food and Agriculture Organization (FAO).It has been successfully invaded sugarcane and corn in Jinggu,Longchuan,Gengma,Menghai,Yingjiang,Lancang of Yunan Province,China.In view of the great variety of hosts,wide range of habitats and strong migration ability,S.frugiperda has the potential of causing catastrophic threats to sugarcane production.In this paper,we made a systematic introduction to the morphological and biological characteristics of S.frugiperda,analyzed its occurrence situations and occurrence trends in Yunnan of China and other countries around the world,and proposed the control strategies and measures of ecological regulation and control,natural enemies protection and utilization,biological control,pesticide control and adults trapping based on the outbreak characteristics of S.frugiperda and the actual sugarcane production in low latitude plateau areas.

Monitoring and Control Technology of Bactrocera dorsalis

After systematic monitoring and field survey in orchard for three years from 2009 to 2011, it was found that Bactrocera dorsalis occurred for more than three generations each year on the north shore of the middle and lower reaches of Yangtze River, with overlapping generations; the activity peak of adults was from mid August to late September; the occurrence in citrus orchard in hilly and mountainous area was severe; the average insect-fruit rate in October reached 0.20% - 15.88% ; B. dorsalis had sporadic occurrence in other orchards. The integrated control measures of plowing in winter to kill pupae, removing insect-fruits, boycott- ing on the ground, trapping by sex attraetants and spraying pesticides could basically control the damage of B. dorsalis.

Control performance monitoring and advanced control towards energy conservation

High performance control of an interactive process such as iron and steel plant relies on ability to honor safety and operational constraints;reduce the standard deviations of variables that need to be controlled(e.g.product quantity,quality );de-bottlenecking the process;and,maximize profitability or lower cost(e.g.energy savings, improve hot metal content).These objectives may be prioritized in this order,but can vary and are very difficult to achieve optimally through conventional control.A multivariable predictive controller solution,along with its extensive inferential sensor and built-in optimizer,provides online closed loop control and optimization for many interactive metal and mining processes to lower the energy cost,increase throughput,and optimize product quality and yield. Control loop performance is also a key factor to improve iron and steel plant automation and operation result; Honeywell CPM offers vender-independent product which provides monitoring,tuning,modeling of control loop and sustainable loop performance analysis and maintenance solution towards operation stability and energy saving.