Study of Controlling Clutch Engagement for AMT Based on Fuzzy Logic

The control of the clutch engagement for an automatic mechanical transmission in the process of a tracklayer getting to start is studied. The dynamic model of power transmission and automatic clutch system is developed. Using tools of Simulink, the transient characteristics during the vehicle starting, including the jerk and the clutch slip time, are provided here. Based on the analyses of the simulation results and driver’s experiences, a fuzzy controller is designed to control the clutch engagement. Simulation results verify its value.

OPTIMAL CONTROL APPLIED IN AUTOMATIC CLUTCH ENGAGEMENTS OF VEHICLES

Start-up working condition is the key to the research of optimal engagementof automatic clutch for AMT. In order to guarantee an ideal dynamic performance of the clutchengagement, an optimal controller is designed by considering throttle angle, engine speed, gearratio, vehicle acceleration and road condition. The minimum value principle is also introduced toachieve an optimal dynamic performance of the nonlinear system compromised in friction plate wearand vehicle drive quality. The optimal trajectory of the clutch engagement can be described in theform of explicit and analytical expressions and characterized by the deterministic and accuratecontrol strategy in stead of indeterministic and soft control techniques which need thousands ofexperiments. For validation of the controller, test work is carried out for the automated clutchengagements in a commercial car with an traditional mechanical transmission, a hydraulic actuator, agroup of sensors and a portable computer system. It is shown through experiments that dynamicbehaviors of the clutch engagement operated by the optimal control are more effective and efficientthan those by fuzzy control.

Adaptive Clutch Engaging Process Control for Automatic Mechanical Transmission

Based on detail analysis of clutch engaging process control targets and adaptive demands, a control strategy which is based on speed signal, different from that of based on main clutch displacement signal, is put forward. It considers both jerk and slipping work which are the most commonly used quality evaluating indexes of vehicle starting phase. The adaptive control system and its reference model are discussed profoundly. Taking the adaptability to different starting gears and different road conditions as examples, some proving field test records are shown to illustrate the main clutch adaptive control strategy at starting phase. Proving field test gives acceptable results.

STUDY ON CONTROL STRATEGY OF CLUTCH STARTING FOR CAR WITH A METAL PUSHING BELT-PLANETARY GEAR CONTINUOUSLY VARIABLE TRANSMISSION SYSTEM

The automatic control of clutch starting in car with a metal pushingbelt-planetary gear continuously variable transmission (CVT) is a complex problem. A suited controlstrategy is required to realize quick and smooth start. A simulation state space equation isestablished on clutch staring control of a car with CVT by bond graph theory. According to the fuzzycontrol method with the expert system, a fuzzy control system of car starting process to weaken thejerk motion is introduced. The simulation results indicate that the jerk motion of clutch startingis below 10 m/s^3.

Precision Tension Control System Using Magnetic Particle Clutch

The control of the stability of the filament tension is one of the crucial techniques ensuring the component quality of the composite materials. The open-loop tension control system, with industrial control computer as the core, magnetic particle clutch as the actuator, equipped with compensation technique is researched and manufactured. It can assure the tension control stability of the yarn in filament winding process and increase the control precision of the whole system.

Dynamic Simulation and Valve Structure Optimization of an Electro-Hydraulic Clutch Shift Control System in an Automatic Transmission

The electro-hydraulic clutch control system controls the transferred torque of gear-shifting clutches in clutch-to-clutch transmissions. A nonlinear dynamic model of an electro-hydraulic clutch shift control system is presented. The mechanical and fluid subsystems of all valves are investigated, including their interactions. Model validation of the electro-hydraulic valve system is performed by comparing the simulated and measured pressure curves. The dynamic characteristics of the electro-hydraulic clutch shift control system with different supply pressures and different fluid temperatures are simulated and evaluated. It is found that pipes which are often ignored between the electro-hydraulic valve system and the clutch piston,have strong influence on clutch piston chamber pressures. In order to satisfy the required time and reduce the fluctuation of the clutch piston chamber pressures,the orifices' diameters and valve structure are optimized.

Sliding Mode Control Approach for Electrically Controllable Clutch of AMT Based on the Feedback Linearization

A sliding mode control approach based on the feedback linearization is proposed for the electrically controllable clutch of AMT vehicles. The nonlinear dynamic model for the hydraulic actuator associated with clutch is established. By means of the exact feedback linearization procedure of differential geometry, an equivalent, fully controllable and linear model is derived via a homomorphic transformation for the AMT clutch system.Furthermore, a sliding mode control is introduced to improve robustness. The tracking tests are performed using the sliding mode control on a Santana LX passenger car, and the experimental results prove that this nonlinear controller is of fine robustness and high degree of tracking accuracy.

Study of engaged performance regulation in controlled transfer clutch of 4WD car based on genetic sliding mode control

This paper investigates an approach to improve the engagement quality of controlled transfer clutch mode in 4 wheel drive(WD) car from three considerations of reducing friction,smoothening responsiveness and alleviating jerk.The method utilizes an improved sliding mode control with genetic algorithm instead of simplified mode to determine appropriate values of parameters in control close- loop.The simulation results show that the method is effective for improving the engagement quality of coupling satisfying different design needs for 4WD car,as well as robustness even if input torque is changed at a certain range.

Application of clutch to clutch gear shift technology for a new automatic transmission

For the purpose of engineering development for a new 8-step speed automatic transmission,a simplified dynamic model for this gearbox was established and key parameters which affected the shift quality were analyzed.Aiming at four different shift types,the ideal characteristics of shift clutch and engine control were set up.By using torque estimation method,PI slip control algorithm and engine coordinated control principle,the control model and transmission controller were well developed for three shift phases which included rapid-fill phase,torque phase and inertia phase.The testing environment on the rig and prototype vehicle level was built and the testing results obtained in ultimate condition could verify the accuracy and feasibility of this shift control strategy.The peak jerk during shift process was controlled within ±2 g/s where the smooth gearshift was obtained.The development proposal and algorithm have a high value for engineering application.

Strategy to control crawling vehicles with automated mechanical transmission

In order to move vehicles with automated mechanical transmission （AMT） a little bit of distance, such as reversing into or moving in a garage, a control strategy for crawling vehicles was proposed. Based on the dynamic analysis of vehicle starting process and requirements of crawl driv- ing for the vehicle, a control strategy of the clutch was designed. The strategy increased the.slipping friction torque first and then decreased it, in order to realize the crawl driving. The speed increased by the engagement of the clutch, and then the clutch turned to disengage to the half disengage point, when the speed met the requirements. Based on the control strategy, a control software was de- signed. In the end, the software was tested on a vehicle with AMT. The lowest steady vehicle speed was reduced to 40% of the original value, which was set in the control strategy.

OPTIMAL TORQUE CONTROL STRATEGY FOR PARALLEL HYBRID ELECTRIC VEHICLE WITH AUTOMATIC MECHANICAL TRANSMISSION

In parallel hybrid electrical vehicle （PHEV） equipped with automatic mechanical transmission （AMT）, the driving smoothness and the clutch abrasion are the primary considerations for powertrain control during gearshift and clutch operation. To improve these performance indexes of PHEV, a coordinated control system is proposed through the analyzing of HEV powertrain dynamic characteristics. Using the method of minimum principle, the input torque of transmission is optimized to improve the driving smoothness of vehicle. Using the methods of fuzzy logic and fuzzy-PID, the engaging speed of clutch and the throttle opening of engine are manipulated to ensure the smoothness of clutch engagement and reduce the abrasion of clutch friction plates. The motor provides the difference between the required input torque of transmission and the torque transmitted through clutch plates. Results of simulation and experiments show that the proposed control strategy performs better than the contrastive control system, the smoothness of driving and the abrasion of clutch can be improved simultaneously.

Review on development progress of automatic manual transmissions control

In recent years, the sustainable development of automatic manual transmissions (AMTs) control in vehicles is conspicuous. The control applications have grown fast and steadily due to the tremendous progress in power electronics components and the control software that enhance the requirements for delivering higher vehicles performance. AMTs control strategies achieve a reduction in the driveline dynamic oscillations behavior during gear shifting and clutch starting up processes. AMTs future expectations are an increase of torque capacity, more speed ratios and the development of advanced and efficient electronic control systems. This paper concerns with the progressing view of AMTs in the past, today and future, gives an overview of the potential dynamic problems concerned with AMTs and some control strategies used to solve those problems.

Simulation study on starting of dual clutch transmission for tracked vehicles

In order to study the application of dual clutch transmission （DCT） on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative （ PID ） control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.

Dynamic Engaging Characteristics of Wet Clutch in Automatic Transmission

Wet clutch is an important shifting component in automatic transmission,and its properties will affect the gear shift performance. By comparing the calculated and test results,the static friction torque model was proved to be capable of describing the real pressure and torque only in the situation of high-energy engagement.Therefore,a dynamic torque model was proposed on basis of hydrodynamic properties between friction surfaces, in which the clutch engagement was divided into three phases for hydrodynamic lubrication, mixed lubrication, and mechanical contact. The proposed dynamic torque model was validated by comparing the calculated and test results. The effects of temperature,pressure,and pressure changing rate of automatic transmission fluid( ATF) on the clutch torque were analyzed. Based on these results,the clutchto-clutch torque control during shifting in automatic transmission was optimized,and as a result,the shifting comfort was significantly improved since the problems such as the fluctuation and sudden drop of the engine rotating speed during shifting were eliminated.

Design of Multi-domain Collaborative Simulation System for Dual Clutch Transmission Based on CAN Bus

A multi-domain collaborative simulation(MDCS) system for dual clutch transmission(DCT) was presented based on controller area network(CAN) bus.An interface card of CAN bus was designed,in which MDCS subsystems were linked as the nodes according to the interface mode of MDCS.A DCT simulation model was established based on Matlab/Simdriveline,whose running process was accurately controlled by the designed control system.The playback system of vehicle state(VPS) was proposed whose input was the road-test data,with a real vehicle test environment for the development of transmission control unit(TCU) being provided.A DCT kinematic system model was set up,and the running status of DCT parts could be displayed in real time.The functions of MDCS were verified based on the extra-urban driving cycle(EUDC) and the vehicle road-test data respectively.The results show the functions of MDCS are accomplished,and the unified supporting platform for the development of TCU is achieved by MDCS.

汽车自动变速器换挡控制自动校准算法研究

为改善自动变速器的换挡特性,提出了一种基于模型的自动变速器离合器液压自动校准方法,实现离合器换挡参数的自动调整。该校准方法包括自动变速器仿真模型、车辆仿真分析算法和基于优化过程的自动校准算法,并在优化过程中进行迭代仿真和分析。以通电换挡为研究对象,仿真结果表明无论是通电升挡,还是通电降挡,该方法均能够有效地执行离合器液压曲线的基本映射,通过所提出的校准方法能够缩短实际车辆试验前的校准时间,提高自动变速器开发过程的效率。

电控半程旋转导向钻井工具研制与现场试验

半程旋转导向钻井技术,是将下部钻具与上部钻具的扭矩进行分离,上部钻柱低转速旋转送钻,下部钻具进行常规滑动定向钻进,可低成本、大幅度提高导向钻井的井眼轨迹控制能力和水平段延伸能力。基于此技术,研制了电控半程旋转导向钻井工具。该工具在常规滑动定向钻井钻柱的近钻头端安放电控半程旋转导向钻井工具,由地面信号下传装置发送钻井液负脉冲序列指令,工具接收指令后执行钻柱扭矩分离和结合动作。需要指出的是,扭矩分离后对反扭矩进行控制是该工具的关键技术,通常用钻柱与井壁的摩擦扭矩对抗反扭矩,但当扭矩激增时无法平衡反扭矩。电控半程旋转导向钻井工具通过增设抗反扭扶正器和吸扭储能总成,有效抵抗反扭矩、稳定工具面。电控半程旋转导向钻井工具已开展4井次现场试验。试验结果表明,该工具可大幅缓解托压,降摩减阻,提高钻压传递效率,具备反扭矩控制能力,扭矩分离后工具面保持平稳,机械钻速有所提高,具有推广应用价值。

双离合器变速箱换挡集成学习控制器设计及分析

为了提高车辆运行的稳定性,设计了一种双离合器DCT变速箱换挡集成学习控制器。基于预测模型建立MPC控制器,以补偿转矩保障转速精准追踪。研究结果表明,在0.11 s时DCT开始出现升挡转矩相,车速整体维持稳定变化的态势,车辆冲击度的最大值是4.8 m/s^(3),有利于大大提高换挡的稳定性。相比其他控制方法,基于经验知识MPC换挡方案获得更优的平顺性控制效果,滑摩功也发生降低,可以更快完成动力响应。该研究有助于提高汽车自动控制,为后续的换挡控制奠定理论基础。

考虑离合器摩擦性能衰减的湿式DCT车辆起步控制研究

建立了考虑离合器摩擦系数变化及离合器性能衰减的湿式双离合变速器(dual clutch transmission,DCT)车辆起步过程动力学模型,以车辆起步过程冲击度、滑摩功和起步滑摩时间为优化目标,采用线性二次型最优控制方法获得了车辆起步过程离合器最优传递转矩。针对离合器摩擦系数变化及离合器性能衰减对车辆起步过程离合器压力控制的影响,提出了一种离合器压力非线性鲁棒控制策略,以实现对离合器最优传递转矩的跟踪。结果表明,所提出的非线性鲁棒控制策略能够在离合器摩擦系数变化的情况下实现对离合器最优传递转矩的有效跟踪,跟踪误差不大于0.02 N·m,且能够适应摩擦性能衰减导致不同寿命阶段摩擦系数的不同变化规律,与比例-积分-微分(proportion-integral-differential,PID)控制策略相比具有更精确的控制效果和更强的鲁棒性。

计入时变扰动的电动汽车离合器滑移控制研究

针对电动汽车离合器系统中存在的时变扰动,提出了新型逆自动机械变速器超越离合器,并设计了基于高阶扰动观测器的离合器最优控制方案。该控制器通过哈密顿方法引入新的乘子函数λ,并以系统状态、扰动和扰动导数的反馈形式给出了最优控制律,然后将该控制器应用于配备逆自动机械变速器的电动汽车换挡时的离合器滑移过程。最后通过仿真表明,该控制器在不同的工作场景和不同的干扰条件下都能保证系统的一致性,保证了离合器滑移过程的平稳性,提高了电动汽车的整体换挡质量。