Zero steady-states electrical energy consumption clutch system

A new clutch configuration with dual diaphragm spring is proposed. It is proper designed for electric and hybrid powertrain system. With this design, the clutch engagement is controlled by current in electrornagnet coil. For special characteristic of dual diaphragm spring, the clutch does not consume energy in steady state after engaging or disengaging. To validate the feasibility of this design, author builds the mathematical model and imports it into MATLAB Simulink. The simulation shows the behavior of clutch in different control strategies.

Impact of the Housing on the Air Flow and the Thermal Behavior of an Automotive Clutch System

New directives and increasing competition push automakers to get better performances (engine power increase), along with mass and size reduction (consumption). These evolutions lead to an increase of the thermal solicitations undergone by the automotive clutches whereas their weight must be decreased, as it is one of the main influent factors on CO2 emissions. Previous studies only focused on the air flow created by the clutches, but none of them have shown the impact of the clutch housing on the cooling of the clutch parts. In order to determine the influence of the clutch housing on the thermal behavior of automotive clutch systems, a numerical study has been performed on a simplified model of a clutch system. A parametric variation has been performed on the clutch housing size in order to evaluate its impact on the flow and the thermal behavior of clutches. The results show that clutch housing has a significant impact on the air flow and the thermal behavior of clutches. Thermal tests on real clutches with and without clutch housing have confirmed these results.

STUDY ON CONTROL STRATEGY OF CLUTCH STARTING FOR CAR WITH A METAL PUSHING BELT-PLANETARY GEAR CONTINUOUSLY VARIABLE TRANSMISSION SYSTEM

The automatic control of clutch starting in car with a metal pushingbelt-planetary gear continuously variable transmission (CVT) is a complex problem. A suited controlstrategy is required to realize quick and smooth start. A simulation state space equation isestablished on clutch staring control of a car with CVT by bond graph theory. According to the fuzzycontrol method with the expert system, a fuzzy control system of car starting process to weaken thejerk motion is introduced. The simulation results indicate that the jerk motion of clutch startingis below 10 m/s^3.

Precision Tension Control System Using Magnetic Particle Clutch

The control of the stability of the filament tension is one of the crucial techniques ensuring the component quality of the composite materials. The open-loop tension control system, with industrial control computer as the core, magnetic particle clutch as the actuator, equipped with compensation technique is researched and manufactured. It can assure the tension control stability of the yarn in filament winding process and increase the control precision of the whole system.

Dynamic Simulation and Valve Structure Optimization of an Electro-Hydraulic Clutch Shift Control System in an Automatic Transmission

The electro-hydraulic clutch control system controls the transferred torque of gear-shifting clutches in clutch-to-clutch transmissions. A nonlinear dynamic model of an electro-hydraulic clutch shift control system is presented. The mechanical and fluid subsystems of all valves are investigated, including their interactions. Model validation of the electro-hydraulic valve system is performed by comparing the simulated and measured pressure curves. The dynamic characteristics of the electro-hydraulic clutch shift control system with different supply pressures and different fluid temperatures are simulated and evaluated. It is found that pipes which are often ignored between the electro-hydraulic valve system and the clutch piston,have strong influence on clutch piston chamber pressures. In order to satisfy the required time and reduce the fluctuation of the clutch piston chamber pressures,the orifices' diameters and valve structure are optimized.

函数展开计数在CLUTCH方法中的初步应用

反复裂变几率(IFP)方法广泛应用于求解k特征值对连续能量核数据的灵敏度系数,然而IFP方法存在内存占用大的问题,因此CLUTCH方法被提出以解决该问题。但对于大规模问题,如压水堆全堆问题,基于网格的CLUTCH(CLUTCH-Mesh)方法存在权重函数不易收敛的问题。本文采用函数展开计数(FET)方法对CLUTCH方法中的权重函数进行统计(CLUTCH-FET)以解决该问题,函数展开计数选取的基函数是勒让德多项式。本文在蒙特卡罗粒子输运计算程序NECP-MCX中实现了IFP、CLUTCH-Mesh和CLUTCH-FET 3种方法,以IFP方法的计算结果作为参考解,对CLUTCH-Mesh和CLUTCH-FET方法的精度和效率进行了验证。数值结果表明:对于小规模问题,如Godiva和Flattop问题,CLUTCH-Mesh和CLUTCH-FET方法具有与IFP方法相当的精度,且计算效率较IFP方法更高;对于大规模问题,如AP1000全堆问题,CLUTCH-Mesh方法的计算精度下降,而CLUTCH-FET方法可保持较高的精度和计算效率,CLUTCH-FET方法的品质因子较IFP方法和CLUTCH-Mesh方法分别最多提高了5.2和6.0倍。

Comparisons of Condylar Movements with the Functional Occlusal Clutch and Tray Clutch Recording Methods in CADIAX~ system

Aim The purpose of this study is to compare the effects of the two clutches on recording the condylar movement. Methodology Ten subjects （6 women,4 men; mean age 25.4 years） participated in the study. The mandibular move-ment,sagittal condylar inclination angle,and transversal condylar inclination angle of each subject were recorded with the CADIAX？ using the two clutches,respectively. The characteristics of the tracings of the protrusion,opening,and mediotrusion were analyzed with the t-test statistics at α = 0.05 level. The Kappa values were calculated for an assessment of the congruence of the tracings. Results The results showed that the contour,direction,and dimension of the tracings in the two clutches were approxi-mately same,but the tracings determined by the functional occlusal clutch were more regular and congruent. In the group segment recorded with the tray clutch,opening/ closing paths of one subject showed crossed and time curves of three subjects appeared peak-like changes of velocity,but none were statistically different （P0.05）. Conclusion The research suggests that the functional occlusal clutch should be preferred in the evaluation of the mandibular function,as the tracings with the tray clutch are more likely to produce false positive results.

Design of Multi-domain Collaborative Simulation System for Dual Clutch Transmission Based on CAN Bus

A multi-domain collaborative simulation(MDCS) system for dual clutch transmission(DCT) was presented based on controller area network(CAN) bus.An interface card of CAN bus was designed,in which MDCS subsystems were linked as the nodes according to the interface mode of MDCS.A DCT simulation model was established based on Matlab/Simdriveline,whose running process was accurately controlled by the designed control system.The playback system of vehicle state(VPS) was proposed whose input was the road-test data,with a real vehicle test environment for the development of transmission control unit(TCU) being provided.A DCT kinematic system model was set up,and the running status of DCT parts could be displayed in real time.The functions of MDCS were verified based on the extra-urban driving cycle(EUDC) and the vehicle road-test data respectively.The results show the functions of MDCS are accomplished,and the unified supporting platform for the development of TCU is achieved by MDCS.

Finite Element Modeling and Vibration Analysis of Sprag Clutch⁃Flexible Rotor System

To study the overall vibration characteristics of the sprag clutch⁃flexible rotor system(SC⁃FRS)under high⁃speed operating conditions,a finite element model of SC⁃FRS considering rotor flexibility and bearing support stiffness was established based on the proposed calculation method of the stiffness matrix.According to this model,the natural frequency and mode shape of the system are calculated,and the correctness of the model was verified by comparing it with the calculation results of ANSYS software.Under the action of unbalance,the bending⁃torsion coupled vibration and the dynamic load of the inter⁃shaft bearings were analyzed,and it is found that the resonant peak in the torsional direction has the same resonance frequency as that in the bending direction.A test rig for the sprag clutch⁃rotor system was built,and the axis trajectory and critical speed were tested.The test results show that the finite element model of SC⁃FRS can accurately describe the vibration characteristics of the system.The coupling vibration characteristics analysis of the sprag clutch⁃flexible rotor system can provide theoretical guidance for the dynamic design of the sprag clutch components.

The clutch size,incubation behavior of Reeves’s Pheasant(Syrmaticus reevesii) and their responses to ambient temperature and precipitation

Weather conditions play a pivotal role in embryo development and parental incubation costs,potentially impacting the clutch size and incubation behavior of birds.Understanding these effects is crucial for bird conservation.Reeves’ s Pheasant(Syrmaticus reevesii) is a threatened species endemic to China,which is characterized by female-only incubation.However,there is a lack of information regarding the impact of weather conditions on clutch size and incubation behavior in this species.Using satellite tracking,we tracked 27 wild female Reeves’ s Pheasants from 2020 to 2023 in Hubei Province,China.We explored their clutch size and incubation behavior,as well as their responses to ambient temperature and precipitation.Clutch size averaged 7.75 ±1.36,had an association with average ambient temperature and average daily precipitation during the egglaying period,and was potentially linked to female breeding attempts.Throughout the incubation period,females took an average of 0.73 ±0.46 recesses every 24 h,with an average recess duration of 100.80 ±73.37 min and an average nest attendance of 92.98 ±5.27%.They showed a unimodal recess pattern in which nest departures peaked primarily between 13:00 and 16:00.Furthermore,females rarely left nests when daily precipitation was high.Recess duration and nest attendance were influenced by the interaction between daily mean ambient temperature and daily precipitation,as well as day of incubation.Additionally,there was a positive correlation between clutch size and recess duration.These results contribute valuable insights into the lifehistory features of this endangered species.

Fault Diagnosis for Buckling Friction Components in Wet Multi-Disc Clutches Using IHHT

The wet multi-disc clutches are extensively used in various transmission systems,withone of the most prevalent failure modes being the buckling deformation of friction components.Animproved Hilbert-Huang transform method(IHHT)is proposed to address the limitations of tradi-tional time-domain vibration analyses,such as low accuracy and mode mixing.This paper first clas-sifies the buckling degree of the friction components.Next,wavelet packet transform(WPT)isapplied to the vibration signals of different buckling plates to partition them into distinct fre-quency bands.Then,the instantaneous features are extracted by empirical mode decomposition(EMD)and Hilbert transform(HT)to discarding extraneous intrinsic mode function(IMF)com-ponents.Comparative analyses of Hilbert spectral entropy and time-domain features confirm theenhanced precision of IHHT under specific classifiers,which is better than traditional methods.

解读竞赛压力下的运动表现:一个“Clutch”视角的运动能力初探

"Clutch"是一种与"Choking"典型相反的现象,主要描述运动员在比赛关键时刻的完美表现。基于"Clutch"表现,从现象学的角度,讨论压力下运动能力的发挥,并分析"Clutch"运动员的能力表现特征,旨在为优秀运动员的训练和选拔提供理论依据。研究认为,竞赛压力下的运动表现存在极性现象,"Choking"反映的是负性运动表现,而"Clutch"反映的是正性运动表现。从特征解释上讲,"Choking"表述为情景的运动表现,而"Clutch"则是特质的运动表现。"Clutch"反映了运动员在压力下展示技术的能力,一般发生在优秀运动员身上。通过"Clutch"运动表现的案例分析,结合相关研究成果,认为"Clutch"运动员是存在的,并提出了"Clutch"运动员的能力表现解释模型。该模型主要包括"专项运动能力"、"压力认知应对能力"和"运动员人格"3个方面。

Study of Controlling Clutch Engagement for AMT Based on Fuzzy Logic

The control of the clutch engagement for an automatic mechanical transmission in the process of a tracklayer getting to start is studied. The dynamic model of power transmission and automatic clutch system is developed. Using tools of Simulink, the transient characteristics during the vehicle starting, including the jerk and the clutch slip time, are provided here. Based on the analyses of the simulation results and driver’s experiences, a fuzzy controller is designed to control the clutch engagement. Simulation results verify its value.

Dynamic Performance Simulation of Power Shift Clutch During Shift

Based on the theoretical analyses, the dynamic and mathematical models of the system were developed. The models were implemented in the ambit of the Matlab/Simulink environment, and an integrated simulation model was developed. The dynamic performance of the power shift clutch during engagement and disengagement was studied by using this assembly model. The sliding speed, torque transmitted through the clutch, and the rate at which energy is dissipated during the process were determined. Using this model, the calculation during simulation can be simplified. This lays a foundation for the dynamic performance research on the power train with the power shift clutch, and provides a powerful tool for developing an automatic, electronically controlled transmission.

Oil-Film Clutch in Soft-Start of Belt Conveyor

The oil film clutch, which is superior in speed adjustment, is capable of being used in the belt conveyor to carry out soft start operation. According to running properties of both belt conveyor and oil film clutch, equations that are used to decide the lubricating oil flow and the number of oil films (i.e. the number of rotating and stationary plates) are deduced theoretically. Also key parameters are provided for the design of the hydraulic system. All these together provide the theoretical basis for the soft start design of the belt conveyor and references for the application of the oil film clutch in similar fields.

Analysis of the Test of ER Fan Clutch

Aim To carry out an experiment of the application of ER fluids in the clutch by reforming a fan clutch used in a truck. Methods At three different input rotating speeds,when the strength of applied electric field was changed, the output rotating speeds were recorded and analyzed. Results By comparing the results got under different experimental procedures with those measured with an electro-rheometer, it can be seen that the shearing rate has tremendous influence on the speed modulating of a fan clutch. This is because the disperse phase can't form chains (clusters)easily at high shear rate.Conclusion The result tested on the present ER fluid demonstrates that this fluid will show the properties of Newton one,i.e. its apparent viscosity is constant. as the shear rate increases.

Choking与Clutch运动员的自我感知、状态焦虑及应对方式质性研究——以乒乓球项目为例

压力通常被认为是影响工作的重要因素,“Choking”与“Clutch”是常见的压力极性化表现。以乒乓球项目为例,通过对运动员出现“Choking”或“Clutch”时的自我感知、状态焦虑及应对方式进行质性研究,解读两种比赛状态的表现特征及诱因,并对减少“Choking”现象的产生,增加“Clutch”的发生概率提出建议。

Experimental Research and Mathematical Model of Drag Torque in Single-plate Wet Clutch

Reduction of drag torque is one of important potentials to improve transmission efficiency.Existing mathematical model of drag torque was not accurate to predict the decrease after oil film shrinking because of the difficulty in modeling the flow pattern between two plates.Flow pattern was considered as laminar flow and full oil film in the gap between two plates in traditional model.Subsequent equivalent circumferential degree model presented an improvement in oil film shrinking due to centrifugal force,but was also based on full oil film in the gap,which resulted difference between model prediction and experimental data.The objective of this paper is to develop an accurate mathematical model for the above problem by using experimental verification.An experimental apparatus was set up to test drag torque of disengaged wet clutch consisting of single friction and separate plate.A high speed camera was used to record the flow pattern through transparent quartz disk plate.The visualization of flow pattern in the clearance was investigated to evaluate the characteristics of oil film shrinking.Visual test results reveal that the oil film begins to shrink from outer radius to inner radius at the stationary plate and only flows along the rotating plate after shrinking.Meanwhile,drag torque decreases sharply due to little contact area between the stationary plate and the oil.A three-dimensional Navier-Stokes （N-S） equation based on laminar flow is presented to model the drag torque.Pressure distributions in radial and circumferential directions as well as speed distributions are deduced.The model analysis reveals that the acceleration of flow in radial direction caused by centrifugal force is the key reason for the shrinking at the constant feeding flow rate.An approach to descript flow pattern was presented on the basis of visual observation.The drag torque predicted by the model agrees well with test data for non-grooved wet clutch.The proposed model enhances the precision for predicting drag torque,and lays down a framework on which some subsequent models are developed.

Drag Torque Prediction Model for the Wet Clutches

Reduction of drag torque in disengaged wet clutch is one of important potentials for vehicle transmission improvement. The flow of the oil film in clutch clearance is investigated. A three-dimension Navier-Stokes(N-S) equation based on laminar flow is presented to model the drag torque. Pressure and speed distribution in radial and circumferential directions are deduced. The theoretical analysis reveals that oil flow acceleration in radial direction caused by centrifugal force is the key reason for the shrinking of oil film as constant feeding flow rate. The peak drag torque occurs at the beginning of oil film shrinking. A variable is introduced to describe effective oil film area and drag torque after oil film shrinking is well evaluated with the variable. Under the working condition, tests were made to obtain drag torque curves at different clutch speed and oil viscosity. The tests confirm that simulation results agree with test data. The model performs well in the prediction of drag torque and lays a theoretical foundation to reduce it.

OPTIMAL CONTROL APPLIED IN AUTOMATIC CLUTCH ENGAGEMENTS OF VEHICLES

Start-up working condition is the key to the research of optimal engagementof automatic clutch for AMT. In order to guarantee an ideal dynamic performance of the clutchengagement, an optimal controller is designed by considering throttle angle, engine speed, gearratio, vehicle acceleration and road condition. The minimum value principle is also introduced toachieve an optimal dynamic performance of the nonlinear system compromised in friction plate wearand vehicle drive quality. The optimal trajectory of the clutch engagement can be described in theform of explicit and analytical expressions and characterized by the deterministic and accuratecontrol strategy in stead of indeterministic and soft control techniques which need thousands ofexperiments. For validation of the controller, test work is carried out for the automated clutchengagements in a commercial car with an traditional mechanical transmission, a hydraulic actuator, agroup of sensors and a portable computer system. It is shown through experiments that dynamicbehaviors of the clutch engagement operated by the optimal control are more effective and efficientthan those by fuzzy control.