The electro-hydraulic clutch control system controls the transferred torque of gear-shifting clutches in clutch-to-clutch transmissions. A nonlinear dynamic model of an electro-hydraulic clutch shift control system is...The electro-hydraulic clutch control system controls the transferred torque of gear-shifting clutches in clutch-to-clutch transmissions. A nonlinear dynamic model of an electro-hydraulic clutch shift control system is presented. The mechanical and fluid subsystems of all valves are investigated, including their interactions. Model validation of the electro-hydraulic valve system is performed by comparing the simulated and measured pressure curves. The dynamic characteristics of the electro-hydraulic clutch shift control system with different supply pressures and different fluid temperatures are simulated and evaluated. It is found that pipes which are often ignored between the electro-hydraulic valve system and the clutch piston,have strong influence on clutch piston chamber pressures. In order to satisfy the required time and reduce the fluctuation of the clutch piston chamber pressures,the orifices' diameters and valve structure are optimized.展开更多
Cyberattacks targeting industrial control systems(ICS)are becoming more sophisticated and advanced than in the past.A programmable logic controller(PLC),a core component of ICS,controls and monitors sensors and actuat...Cyberattacks targeting industrial control systems(ICS)are becoming more sophisticated and advanced than in the past.A programmable logic controller(PLC),a core component of ICS,controls and monitors sensors and actuators in the field.However,PLC has memory attack threats such as program injection and manipulation,which has long been a major target for attackers,and it is important to detect these attacks for ICS security.To detect PLC memory attacks,a security system is required to acquire and monitor PLC memory directly.In addition,the performance impact of the security system on the PLC makes it difficult to apply to the ICS.To address these challenges,this paper proposes a system to detect PLC memory attacks by continuously acquiring and monitoring PLC memory.The proposed system detects PLC memory attacks by acquiring the program blocks and block information directly from the same layer as the PLC and then comparing them in bytes with previous data.Experiments with Siemens S7-300 and S7-400 PLC were conducted to evaluate the PLC memory detection performance and performance impact on PLC.The experimental results demonstrate that the proposed system detects all malicious organization block(OB)injection and data block(DB)manipulation,and the increment of PLC cycle time,the impact on PLC performance,was less than 1 ms.The proposed system detects PLC memory attacks with a simpler detection method than earlier studies.Furthermore,the proposed system can be applied to ICS with a small performance impact on PLC.展开更多
The control of the stability of the filament tension is one of the crucial techniques ensuring the component quality of the composite materials. The open-loop tension control system, with industrial control computer a...The control of the stability of the filament tension is one of the crucial techniques ensuring the component quality of the composite materials. The open-loop tension control system, with industrial control computer as the core, magnetic particle clutch as the actuator, equipped with compensation technique is researched and manufactured. It can assure the tension control stability of the yarn in filament winding process and increase the control precision of the whole system.展开更多
The automatic control of clutch starting in car with a metal pushingbelt-planetary gear continuously variable transmission (CVT) is a complex problem. A suited controlstrategy is required to realize quick and smooth s...The automatic control of clutch starting in car with a metal pushingbelt-planetary gear continuously variable transmission (CVT) is a complex problem. A suited controlstrategy is required to realize quick and smooth start. A simulation state space equation isestablished on clutch staring control of a car with CVT by bond graph theory. According to the fuzzycontrol method with the expert system, a fuzzy control system of car starting process to weaken thejerk motion is introduced. The simulation results indicate that the jerk motion of clutch startingis below 10 m/s^3.展开更多
This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure...This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure in automated metro railways system operator and integrate the information coming from Operational Control Centre(OCC),traction SCADA system,traction power control,and power supply system.This work presents a simulated prototype of an automated metro train system operator that uses PLC and SCADA for the real time monitoring and control of the metro railway systems.Here,SCADA is used for the visualization of an automated process operation and then the whole opera-tion is regulated with the help of PLC.The PLC used in this process is OMRON(NX1P2-9024DT1)and OMRON’s Sysmac studio programming software is used for developing the ladder logic of PLC.The metro railways system has deployed infrastructure based on SCADA from the power supply system,and each station’s traction power control is connected to the OCC remotely which commands all of the stations and has the highest command priority.An alarm is triggered in the event of an emergency or system congestion.This proposed system overcomes the drawbacks of the current centralized automatic train control(CATC)system.This system provides prominent benefits like augmenting services which may enhance a network’s full load capacity and networkflexibility,which help in easy modification in the existing program at any time.展开更多
Start-up working condition is the key to the research of optimal engagementof automatic clutch for AMT. In order to guarantee an ideal dynamic performance of the clutchengagement, an optimal controller is designed by ...Start-up working condition is the key to the research of optimal engagementof automatic clutch for AMT. In order to guarantee an ideal dynamic performance of the clutchengagement, an optimal controller is designed by considering throttle angle, engine speed, gearratio, vehicle acceleration and road condition. The minimum value principle is also introduced toachieve an optimal dynamic performance of the nonlinear system compromised in friction plate wearand vehicle drive quality. The optimal trajectory of the clutch engagement can be described in theform of explicit and analytical expressions and characterized by the deterministic and accuratecontrol strategy in stead of indeterministic and soft control techniques which need thousands ofexperiments. For validation of the controller, test work is carried out for the automated clutchengagements in a commercial car with an traditional mechanical transmission, a hydraulic actuator, agroup of sensors and a portable computer system. It is shown through experiments that dynamicbehaviors of the clutch engagement operated by the optimal control are more effective and efficientthan those by fuzzy control.展开更多
Based on detail analysis of clutch engaging process control targets and adaptive demands, a control strategy which is based on speed signal, different from that of based on main clutch displacement signal, is put forw...Based on detail analysis of clutch engaging process control targets and adaptive demands, a control strategy which is based on speed signal, different from that of based on main clutch displacement signal, is put forward. It considers both jerk and slipping work which are the most commonly used quality evaluating indexes of vehicle starting phase. The adaptive control system and its reference model are discussed profoundly. Taking the adaptability to different starting gears and different road conditions as examples, some proving field test records are shown to illustrate the main clutch adaptive control strategy at starting phase. Proving field test gives acceptable results.展开更多
The Ethernet and field-bus communications are used in the machine control system (MCS) of HL-2A. The control net, with a programmable logic controller (PLC) as its logic control master, an engineering control mana...The Ethernet and field-bus communications are used in the machine control system (MCS) of HL-2A. The control net, with a programmable logic controller (PLC) as its logic control master, an engineering control management station as its net server, and a timing control PC connected to a number of terminals, flexibly and freely transfers information among the nodes on it with the Ethernet transmission techniques. The PLC masters the field bus, which carries small pieces of information between PLC and the field sites reliably and quickly. The control net is connected into the data net, where Internet access and sharing of more experimental data are enabled. The communication in the MCS guarantees the digitalization, automation and centralization. Also provided are a satisfactory degree of safety, reliability, stability, expandability and flexibility for maintenance.展开更多
A multi-domain collaborative simulation(MDCS) system for dual clutch transmission(DCT) was presented based on controller area network(CAN) bus.An interface card of CAN bus was designed,in which MDCS subsystems were li...A multi-domain collaborative simulation(MDCS) system for dual clutch transmission(DCT) was presented based on controller area network(CAN) bus.An interface card of CAN bus was designed,in which MDCS subsystems were linked as the nodes according to the interface mode of MDCS.A DCT simulation model was established based on Matlab/Simdriveline,whose running process was accurately controlled by the designed control system.The playback system of vehicle state(VPS) was proposed whose input was the road-test data,with a real vehicle test environment for the development of transmission control unit(TCU) being provided.A DCT kinematic system model was set up,and the running status of DCT parts could be displayed in real time.The functions of MDCS were verified based on the extra-urban driving cycle(EUDC) and the vehicle road-test data respectively.The results show the functions of MDCS are accomplished,and the unified supporting platform for the development of TCU is achieved by MDCS.展开更多
In the field of industrial process control,a fast-development platform for programmable logic controller(PLC)systems is designed in order to solve two main problems of rapid development of PLC control system and progr...In the field of industrial process control,a fast-development platform for programmable logic controller(PLC)systems is designed in order to solve two main problems of rapid development of PLC control system and programmability of controlling software.In the aspect of design,the platform is composed of hardware controlling and software monitoring and is taking industrial computer as the core.Under the Windows environment,the platform establishes the control instruction set,develops the configuration function and visual programming function of the monitoring software and it integrates PLC controller based on Visual Basic software.In order to achieve the function of data monitoring,it has realized the serial communication between computer and PLC by using RS-485 and RS-232 serial ports line communication.The platform designs the intelligent instruction scheduling strategy by studying the encoding and decoding rules of the communication instruction set.It proposes a method for rapidly developing control programs by adopting the expert control mode,which enables clients to develop and modify programs conveniently by importing instructions in a non-coded manner.After experimental testing,the platform is proved successful achieving both the rapid development of PLC control system and the rapid modification of monitoring software.展开更多
Electron cyclotron resonance heating (ECRH) system is one of the most important Tokamak auxiliary heating methods. However, there are growing demands for ECRH system as the physical experiments progress which meanwhil...Electron cyclotron resonance heating (ECRH) system is one of the most important Tokamak auxiliary heating methods. However, there are growing demands for ECRH system as the physical experiments progress which meanwhile adds the difficulty of designing and building the control system of its power source. In this paper, the method of designing a control system based on Single Chip Microcomputer (SCM) and Field Programmable Gate Array (FPGA) is introduced according to its main requirements. The experimental results show that the control system in this paper achieves the conversion of different working modes, gets exact timing, and realizes the failure protection in 10us thus can be used in the ECRH system.展开更多
A sliding mode control approach based on the feedback linearization is proposed for the electrically controllable clutch of AMT vehicles. The nonlinear dynamic model for the hydraulic actuator associated with clutch i...A sliding mode control approach based on the feedback linearization is proposed for the electrically controllable clutch of AMT vehicles. The nonlinear dynamic model for the hydraulic actuator associated with clutch is established. By means of the exact feedback linearization procedure of differential geometry, an equivalent, fully controllable and linear model is derived via a homomorphic transformation for the AMT clutch system.Furthermore, a sliding mode control is introduced to improve robustness. The tracking tests are performed using the sliding mode control on a Santana LX passenger car, and the experimental results prove that this nonlinear controller is of fine robustness and high degree of tracking accuracy.展开更多
The design of a control system for the material transport as used in gear-box flexible manufacturing system is presented in this paper. The scope of investigation covers material transport control, automatic vehicle, ...The design of a control system for the material transport as used in gear-box flexible manufacturing system is presented in this paper. The scope of investigation covers material transport control, automatic vehicle, material exchange station, multi-storeyed warehouse system, NC and CNC machines and host computer etc. The paper describes the transport control system and its design, and briefly describes the communication among devices and warehouse access principles.展开更多
Eight 500 MHz cavities are applied in the storage ring of the Shanghai Synchrotron Radiation Factility (SSRF). In order to tune the cavities for different changing parameters and operation modes, the control system is...Eight 500 MHz cavities are applied in the storage ring of the Shanghai Synchrotron Radiation Factility (SSRF). In order to tune the cavities for different changing parameters and operation modes, the control system is es- sential for operations. The tuning is achieved by synchronizing the drive signal and the cavity probe signal. The error signal defined as their subtraction is amplified and used to drive a stepping motor, which in turn moves a metallic plunger in or out of the cavity by programmable logic controller (PLC). The tune speed is set to be 1kHz/s.展开更多
This paper investigates an approach to improve the engagement quality of controlled transfer clutch mode in 4 wheel drive(WD) car from three considerations of reducing friction,smoothening responsiveness and alleviati...This paper investigates an approach to improve the engagement quality of controlled transfer clutch mode in 4 wheel drive(WD) car from three considerations of reducing friction,smoothening responsiveness and alleviating jerk.The method utilizes an improved sliding mode control with genetic algorithm instead of simplified mode to determine appropriate values of parameters in control close- loop.The simulation results show that the method is effective for improving the engagement quality of coupling satisfying different design needs for 4WD car,as well as robustness even if input torque is changed at a certain range.展开更多
In order to study the application of dual clutch transmission (DCT) on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existi...In order to study the application of dual clutch transmission (DCT) on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative ( PID ) control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.展开更多
Wet clutch is an important shifting component in automatic transmission,and its properties will affect the gear shift performance. By comparing the calculated and test results,the static friction torque model was prov...Wet clutch is an important shifting component in automatic transmission,and its properties will affect the gear shift performance. By comparing the calculated and test results,the static friction torque model was proved to be capable of describing the real pressure and torque only in the situation of high-energy engagement.Therefore,a dynamic torque model was proposed on basis of hydrodynamic properties between friction surfaces, in which the clutch engagement was divided into three phases for hydrodynamic lubrication, mixed lubrication, and mechanical contact. The proposed dynamic torque model was validated by comparing the calculated and test results. The effects of temperature,pressure,and pressure changing rate of automatic transmission fluid( ATF) on the clutch torque were analyzed. Based on these results,the clutchto-clutch torque control during shifting in automatic transmission was optimized,and as a result,the shifting comfort was significantly improved since the problems such as the fluctuation and sudden drop of the engine rotating speed during shifting were eliminated.展开更多
As the country continues to promote the development of intelligent manufacturing,all industries are carrying out enterprise automation upgrading,the Pearl River Delta Intelligent Manufacturing Conference held in March...As the country continues to promote the development of intelligent manufacturing,all industries are carrying out enterprise automation upgrading,the Pearl River Delta Intelligent Manufacturing Conference held in March 2024 provides a direction guide for each enterprise on how to integrate the intelligent manufacturing technology into each link and provide direction guidance for enterprises to create new models and new business formats.College teachers,in focusing on the teaching process,should closely match the enterprise and social needs and cultivate excellent students.As the core controller of automation control,the application of programmable controllers in teaching is particularly important.In practical classes,by setting progressive difficulty,project guidance,team collaboration,and other links,students can master the automation equipment design of programmable control in repeated practice.展开更多
基金National Natural Science Foundation of China(No.51405010)National Science and Technology Support Program,China(No.2011BAG09B00)
文摘The electro-hydraulic clutch control system controls the transferred torque of gear-shifting clutches in clutch-to-clutch transmissions. A nonlinear dynamic model of an electro-hydraulic clutch shift control system is presented. The mechanical and fluid subsystems of all valves are investigated, including their interactions. Model validation of the electro-hydraulic valve system is performed by comparing the simulated and measured pressure curves. The dynamic characteristics of the electro-hydraulic clutch shift control system with different supply pressures and different fluid temperatures are simulated and evaluated. It is found that pipes which are often ignored between the electro-hydraulic valve system and the clutch piston,have strong influence on clutch piston chamber pressures. In order to satisfy the required time and reduce the fluctuation of the clutch piston chamber pressures,the orifices' diameters and valve structure are optimized.
基金supported by the Korea WESTERN POWER(KOWEPO)(2022-Commissioned Research-11,Development of Cyberattack Detection Technology for New and Renewable Energy Control System Using AI(Artificial Intelligence),50%)the Institute of Information&Communications Technology Planning&Evaluation(IITP)grant funded by the Korea government(MSIT)(No.2021-0-01806,Development of Security by Design and Security Management Technology in Smart Factory,40%)the Gachon University Research Fund of 2023(GCU-202110280001,10%).
文摘Cyberattacks targeting industrial control systems(ICS)are becoming more sophisticated and advanced than in the past.A programmable logic controller(PLC),a core component of ICS,controls and monitors sensors and actuators in the field.However,PLC has memory attack threats such as program injection and manipulation,which has long been a major target for attackers,and it is important to detect these attacks for ICS security.To detect PLC memory attacks,a security system is required to acquire and monitor PLC memory directly.In addition,the performance impact of the security system on the PLC makes it difficult to apply to the ICS.To address these challenges,this paper proposes a system to detect PLC memory attacks by continuously acquiring and monitoring PLC memory.The proposed system detects PLC memory attacks by acquiring the program blocks and block information directly from the same layer as the PLC and then comparing them in bytes with previous data.Experiments with Siemens S7-300 and S7-400 PLC were conducted to evaluate the PLC memory detection performance and performance impact on PLC.The experimental results demonstrate that the proposed system detects all malicious organization block(OB)injection and data block(DB)manipulation,and the increment of PLC cycle time,the impact on PLC performance,was less than 1 ms.The proposed system detects PLC memory attacks with a simpler detection method than earlier studies.Furthermore,the proposed system can be applied to ICS with a small performance impact on PLC.
文摘The control of the stability of the filament tension is one of the crucial techniques ensuring the component quality of the composite materials. The open-loop tension control system, with industrial control computer as the core, magnetic particle clutch as the actuator, equipped with compensation technique is researched and manufactured. It can assure the tension control stability of the yarn in filament winding process and increase the control precision of the whole system.
基金National Natural Science Founda-tion of China (No.59835160).
文摘The automatic control of clutch starting in car with a metal pushingbelt-planetary gear continuously variable transmission (CVT) is a complex problem. A suited controlstrategy is required to realize quick and smooth start. A simulation state space equation isestablished on clutch staring control of a car with CVT by bond graph theory. According to the fuzzycontrol method with the expert system, a fuzzy control system of car starting process to weaken thejerk motion is introduced. The simulation results indicate that the jerk motion of clutch startingis below 10 m/s^3.
文摘This paper proposes to adopt SCADA and PLC technology for the improvement of the performance of real time signaling&train control systems in metro railways.The main concern of this paper is to minimize the failure in automated metro railways system operator and integrate the information coming from Operational Control Centre(OCC),traction SCADA system,traction power control,and power supply system.This work presents a simulated prototype of an automated metro train system operator that uses PLC and SCADA for the real time monitoring and control of the metro railway systems.Here,SCADA is used for the visualization of an automated process operation and then the whole opera-tion is regulated with the help of PLC.The PLC used in this process is OMRON(NX1P2-9024DT1)and OMRON’s Sysmac studio programming software is used for developing the ladder logic of PLC.The metro railways system has deployed infrastructure based on SCADA from the power supply system,and each station’s traction power control is connected to the OCC remotely which commands all of the stations and has the highest command priority.An alarm is triggered in the event of an emergency or system congestion.This proposed system overcomes the drawbacks of the current centralized automatic train control(CATC)system.This system provides prominent benefits like augmenting services which may enhance a network’s full load capacity and networkflexibility,which help in easy modification in the existing program at any time.
文摘Start-up working condition is the key to the research of optimal engagementof automatic clutch for AMT. In order to guarantee an ideal dynamic performance of the clutchengagement, an optimal controller is designed by considering throttle angle, engine speed, gearratio, vehicle acceleration and road condition. The minimum value principle is also introduced toachieve an optimal dynamic performance of the nonlinear system compromised in friction plate wearand vehicle drive quality. The optimal trajectory of the clutch engagement can be described in theform of explicit and analytical expressions and characterized by the deterministic and accuratecontrol strategy in stead of indeterministic and soft control techniques which need thousands ofexperiments. For validation of the controller, test work is carried out for the automated clutchengagements in a commercial car with an traditional mechanical transmission, a hydraulic actuator, agroup of sensors and a portable computer system. It is shown through experiments that dynamicbehaviors of the clutch engagement operated by the optimal control are more effective and efficientthan those by fuzzy control.
文摘Based on detail analysis of clutch engaging process control targets and adaptive demands, a control strategy which is based on speed signal, different from that of based on main clutch displacement signal, is put forward. It considers both jerk and slipping work which are the most commonly used quality evaluating indexes of vehicle starting phase. The adaptive control system and its reference model are discussed profoundly. Taking the adaptability to different starting gears and different road conditions as examples, some proving field test records are shown to illustrate the main clutch adaptive control strategy at starting phase. Proving field test gives acceptable results.
基金The project supported by National Natural Science Foundation of China (No. 10175022) and Sichuan Provincial Youth Foundation
文摘The Ethernet and field-bus communications are used in the machine control system (MCS) of HL-2A. The control net, with a programmable logic controller (PLC) as its logic control master, an engineering control management station as its net server, and a timing control PC connected to a number of terminals, flexibly and freely transfers information among the nodes on it with the Ethernet transmission techniques. The PLC masters the field bus, which carries small pieces of information between PLC and the field sites reliably and quickly. The control net is connected into the data net, where Internet access and sharing of more experimental data are enabled. The communication in the MCS guarantees the digitalization, automation and centralization. Also provided are a satisfactory degree of safety, reliability, stability, expandability and flexibility for maintenance.
基金Science and Technology Commission of Shanghai Municipality,China (No. 08dz1150401)
文摘A multi-domain collaborative simulation(MDCS) system for dual clutch transmission(DCT) was presented based on controller area network(CAN) bus.An interface card of CAN bus was designed,in which MDCS subsystems were linked as the nodes according to the interface mode of MDCS.A DCT simulation model was established based on Matlab/Simdriveline,whose running process was accurately controlled by the designed control system.The playback system of vehicle state(VPS) was proposed whose input was the road-test data,with a real vehicle test environment for the development of transmission control unit(TCU) being provided.A DCT kinematic system model was set up,and the running status of DCT parts could be displayed in real time.The functions of MDCS were verified based on the extra-urban driving cycle(EUDC) and the vehicle road-test data respectively.The results show the functions of MDCS are accomplished,and the unified supporting platform for the development of TCU is achieved by MDCS.
基金Supported by the International S&T Cooperation Program of China(No.2014DFR70280)Key Research and Development Project of Shanxi Province(No.201903D321012)+1 种基金Key Research and Development Project of Shanxi Province(No.201903D121023)Patent Promotion and Implementation Funding Research Project of Shanxi Province(No.20210521).
文摘In the field of industrial process control,a fast-development platform for programmable logic controller(PLC)systems is designed in order to solve two main problems of rapid development of PLC control system and programmability of controlling software.In the aspect of design,the platform is composed of hardware controlling and software monitoring and is taking industrial computer as the core.Under the Windows environment,the platform establishes the control instruction set,develops the configuration function and visual programming function of the monitoring software and it integrates PLC controller based on Visual Basic software.In order to achieve the function of data monitoring,it has realized the serial communication between computer and PLC by using RS-485 and RS-232 serial ports line communication.The platform designs the intelligent instruction scheduling strategy by studying the encoding and decoding rules of the communication instruction set.It proposes a method for rapidly developing control programs by adopting the expert control mode,which enables clients to develop and modify programs conveniently by importing instructions in a non-coded manner.After experimental testing,the platform is proved successful achieving both the rapid development of PLC control system and the rapid modification of monitoring software.
文摘Electron cyclotron resonance heating (ECRH) system is one of the most important Tokamak auxiliary heating methods. However, there are growing demands for ECRH system as the physical experiments progress which meanwhile adds the difficulty of designing and building the control system of its power source. In this paper, the method of designing a control system based on Single Chip Microcomputer (SCM) and Field Programmable Gate Array (FPGA) is introduced according to its main requirements. The experimental results show that the control system in this paper achieves the conversion of different working modes, gets exact timing, and realizes the failure protection in 10us thus can be used in the ECRH system.
基金This project is imbursed by elite university teacher supporting plan
文摘A sliding mode control approach based on the feedback linearization is proposed for the electrically controllable clutch of AMT vehicles. The nonlinear dynamic model for the hydraulic actuator associated with clutch is established. By means of the exact feedback linearization procedure of differential geometry, an equivalent, fully controllable and linear model is derived via a homomorphic transformation for the AMT clutch system.Furthermore, a sliding mode control is introduced to improve robustness. The tracking tests are performed using the sliding mode control on a Santana LX passenger car, and the experimental results prove that this nonlinear controller is of fine robustness and high degree of tracking accuracy.
文摘The design of a control system for the material transport as used in gear-box flexible manufacturing system is presented in this paper. The scope of investigation covers material transport control, automatic vehicle, material exchange station, multi-storeyed warehouse system, NC and CNC machines and host computer etc. The paper describes the transport control system and its design, and briefly describes the communication among devices and warehouse access principles.
文摘Eight 500 MHz cavities are applied in the storage ring of the Shanghai Synchrotron Radiation Factility (SSRF). In order to tune the cavities for different changing parameters and operation modes, the control system is es- sential for operations. The tuning is achieved by synchronizing the drive signal and the cavity probe signal. The error signal defined as their subtraction is amplified and used to drive a stepping motor, which in turn moves a metallic plunger in or out of the cavity by programmable logic controller (PLC). The tune speed is set to be 1kHz/s.
文摘This paper investigates an approach to improve the engagement quality of controlled transfer clutch mode in 4 wheel drive(WD) car from three considerations of reducing friction,smoothening responsiveness and alleviating jerk.The method utilizes an improved sliding mode control with genetic algorithm instead of simplified mode to determine appropriate values of parameters in control close- loop.The simulation results show that the method is effective for improving the engagement quality of coupling satisfying different design needs for 4WD car,as well as robustness even if input torque is changed at a certain range.
基金Supported by Defense Advanced Research Support Project(62301030303)111 Project(B08043)
文摘In order to study the application of dual clutch transmission (DCT) on tracked vehicles, a simulation moclel and two control methods were performed for starting analysis. Based on a certain transmission of an existing tracked vehicle, a DCT structure was proposed. Matlab/Simulink was a dopted as a platform to develop the simulation model. The engine speed was controlled to follow the target speed as a launch strategy. Two control methods, a proportional integral derivative ( PID ) control method and a fuzzy control method, were proposed to control the engine throttle and oil pressure in order to track the target engine speed. Simulation results show that either the PID control or fuzzy control method can improve the starting performance compared with no loop control meth od. Fuzzy control method can lead a better starting quality compared with PID control method.
基金National Science and Technology Support Program,China(No.2011BAG09B00)
文摘Wet clutch is an important shifting component in automatic transmission,and its properties will affect the gear shift performance. By comparing the calculated and test results,the static friction torque model was proved to be capable of describing the real pressure and torque only in the situation of high-energy engagement.Therefore,a dynamic torque model was proposed on basis of hydrodynamic properties between friction surfaces, in which the clutch engagement was divided into three phases for hydrodynamic lubrication, mixed lubrication, and mechanical contact. The proposed dynamic torque model was validated by comparing the calculated and test results. The effects of temperature,pressure,and pressure changing rate of automatic transmission fluid( ATF) on the clutch torque were analyzed. Based on these results,the clutchto-clutch torque control during shifting in automatic transmission was optimized,and as a result,the shifting comfort was significantly improved since the problems such as the fluctuation and sudden drop of the engine rotating speed during shifting were eliminated.
基金Guangdong Province Education Science Planning Project(Higher Education Special)“Construction and Practice of Applied Innovation Education System for Applied Undergraduate Mechanical Majors”(Project number:2023GXJK638)。
文摘As the country continues to promote the development of intelligent manufacturing,all industries are carrying out enterprise automation upgrading,the Pearl River Delta Intelligent Manufacturing Conference held in March 2024 provides a direction guide for each enterprise on how to integrate the intelligent manufacturing technology into each link and provide direction guidance for enterprises to create new models and new business formats.College teachers,in focusing on the teaching process,should closely match the enterprise and social needs and cultivate excellent students.As the core controller of automation control,the application of programmable controllers in teaching is particularly important.In practical classes,by setting progressive difficulty,project guidance,team collaboration,and other links,students can master the automation equipment design of programmable control in repeated practice.