Real-Time Intelligent Diagnosis of Co-frequency Vibration Faults in Rotating Machinery Based on Lightweight-Convolutional Neural Networks

The co-frequency vibration fault is one of the common faults in the operation of rotating equipment,and realizing the real-time diagnosis of the co-frequency vibration fault is of great significance for monitoring the health state and carrying out vibration suppression of the equipment.In engineering scenarios,co-frequency vibration faults are highlighted by rotational frequency and are difficult to identify,and existing intelligent methods require more hardware conditions and are exclusively time-consuming.Therefore,Lightweight-convolutional neural networks(LW-CNN)algorithm is proposed in this paper to achieve real-time fault diagnosis.The critical parameters are discussed and verified by simulated and experimental signals for the sliding window data augmentation method.Based on LW-CNN and data augmentation,the real-time intelligent diagnosis of co-frequency is realized.Moreover,a real-time detection method of fault diagnosis algorithm is proposed for data acquisition to fault diagnosis.It is verified by experiments that the LW-CNN and sliding window methods are used with high accuracy and real-time performance.

Intelligent Diagnosis Method for Typical Co-frequency Vibration Faults of Rotating Machinery Based on SAE and Ensembled ResNet-SVM

Intelligent fault diagnosis is an important method in rotating machinery fault diagnosis and equipment health management.To deal with co-frequency vibration faults,a type of typical fault in rotating machinery,this paper proposes a fault diagnosis method based on the stacked autoencoder(SAE)and ensembled ResNet-SVM.Furthermore,the time-and frequency-domain features of several co-frequency vibration faults are summarized based on the mechanism analysis and calculated using actual vibration data.To realize and validate the high-precision diagnosis method of rotating equipment with co-frequency faults proposed in this study,the following three criteria are required:First,to improve the effectiveness and robustness of the ensembled model and the sliding window using data augmentation,adding noise,autoencoder(AE)and SAE methods are analyzed in terms of principle and practical effects.Second,ResNet is used as the feature extractor for the ensembled ResNet-SVM model.Feature extraction is carried out twice,and the extracted co-frequency fault features are more comprehensive.Finally,the data augmentation method and ensemble ResNet-SVM are combined for fault diagnosis and compared with other methods.The experimental results show that the accuracy of the proposed method can exceed 99.9%.

Co-Frequency Interference Analysis and Avoidance Between NGSO Constellations: Challenges, Techniques, and Trends

In recent years,as giant satellite constellations grow rapidly worldwide,the co-existence between constellations has been widely concerned.In this paper,we overview the co-frequency interference(CFI)among the giant non-geostationary orbit(NGSO)constellations.Specifically,we first summarize the CFI scenario and evaluation index among different NGSO constellations.Based on statistics about NGSO constellation plans,we analyse the challenges in mitigation and analysis of CFI.Next,the CFI calculation methods and research progress are systematically sorted out from the aspects of interference risk analysis framework,numerical calculation and link construction.Then,the feasibility of interference mitigation technologies based on space,frequency domain isolation,power control,and interference alignment mitigation in the NGSO mega-constellation CFI scenario are further sorted out.Finally,we present promising directions for future research in CFI analysis and CFI avoidance.

RIS-Assisted Federated Learning in Multi-Cell Wireless Networks

Over-the-air computation(AirComp)based federated learning(FL)has been a promising technique for distilling artificial intelligence(AI)at the network edge.However,the performance of AirComp-based FL is decided by the device with the lowest channel gain due to the signal alignment property.More importantly,most existing work focuses on a single-cell scenario,where inter-cell interference is ignored.To overcome these shortages,a reconfigurable intelligent surface(RIS)-assisted AirComp-based FL system is proposed for multi-cell networks,where a RIS is used for enhancing the poor user signal caused by channel fading,especially for the device at the cell edge,and reducing inter-cell interference.The convergence of FL in the proposed system is first analyzed and the optimality gap for FL is derived.To minimize the optimality gap,we formulate a joint uplink and downlink optimization problem.The formulated problem is then divided into two separable nonconvex subproblems.Following the successive convex approximation(SCA)method,we first approximate the nonconvex term to a linear form,and then alternately optimize the beamforming vector and phase-shift matrix for each cell.Simulation results demonstrate the advantages of deploying a RIS in multi-cell networks and our proposed system significantly improves the performance of FL.

New Approach of Multi-Cell Stacked Cell Inverter for Solar Photovoltaic System

In this paper, a new inverter topology dedicated to isolated or grid-connected PV systems is proposed. This inverter is based on the structures of a stacked multi-cell converter (SMC) and an H-bridge. This new topology has allowed the voltage stresses of the converter to be distributed among several switching cells. Secondly, divide the input voltage into several fractions to reduce the number of power semiconductors to be switched. In this contribution, the general topology of this micro-inverter has been described and the simulation tests developed to validate its operation have been presented. Finally, we discussed the simulation results, the efficiency of this topology and the feasibility of its use in a grid-connected photovoltaic production system.

Evaluation of Linear Precoding Schemes for Cooperative Multi-Cell MU MIMO in Future Mobile Communication Systems

In Mobile Communication Systems, inter-cell interference becomes one of the challenges that degrade the system’s performance, especially in the region with massive mobile users. The linear precoding schemes were proposed to mitigate interferences between the base stations (inter-cell). These schemes are categorized into linear and non-linear;this study focused on linear precoding schemes, which are grounded into three types, namely Zero Forcing (ZF), Block Diagonalization (BD), and Signal Leakage Noise Ratio (SLNR). The study included the Cooperative Multi-cell Multi Input Multi Output (MIMO) System, whereby each Base Station serves more than one mobile station and all Base Stations on the system are assisted by each other by shared the Channel State Information (CSI). Based on the Multi-Cell Multiuser MIMO system, each Base Station on the cell is intended to maximize the data transmission rate by its mobile users by increasing the Signal Interference to Noise Ratio after the interference has been mitigated due to the usefully of linear precoding schemes on the transmitter. Moreover, these schemes used different approaches to mitigate interference. This study mainly concentrates on evaluating the performance of these schemes through the channel distribution models such as Ray-leigh and Rician included in the presence of noise errors. The results show that the SLNR scheme outperforms ZF and BD schemes overall scenario. This implied that when the value of SNR increased the performance of SLNR increased by 21.4% and 45.7% for ZF and BD respectively.

Corrosion risk assessment of chloride-contaminated concrete structures using embeddable multi-cell sensor system

Monitoring the service condition of concrete structures requires the quantitative assessment of properties and corrosion rate of structural steels surrounded by concrete.A multi-cell sensor system that included a reference electrode,a chloride content sensor,a macrocell current unit and an electrical resistance measurement unit was developed.This system provided the following important electrochemical data in the cover-zone concrete on site:open circuit potential,macrocell current from anodes to cathode,chloride profile,concrete resistance and corrosion rate of built-in anodes.The experimental results show that the macrocell current increases when the chloride content in concrete is higher.Thus,monitoring the chloride content is a good method for monitoring the corrosion state.The chloride ion content and cover depth are the key factors that affect the electrical resistance of concrete.Without considering the temperature and time,a simplified model of the instantaneous corrosion rate of steel rebar in a concrete structure based on the measured chloride contents and concrete resistance was proposed.The test results further prove the reliability of this simplified predicting model.

Multi-objective optimization of multi-cell conical structures under dynamic loads

In this paper,crashworthiness performance of multi-cell conical tubes with new sectional configuration design(i.e.square,hexagonal,octagonal,decagon and circular)has been evaluated under axial and three different oblique loads.The same weight conical tubes were comparatively studied using an experimentally validated finite element model generated in LS-DYNA.Complex proportional assessment(COPRAS)method was then employed to select the most efficient tube using two conflicting criteria,namely peak collapse force(PCF)and energy absorption(EA).From the COPRAS calculations,the multi-cell conical tube with decagonal cross-section(MCDT)showed the best crashworthiness performance.Furthermore,the effects of possible number of inside ribs on the crashworthiness of the decagonal conical tubes were also evaluated,and the results displayed that the tubes performed better as the number of ribs increased.Finally,parameters(the cone angle,θ,and ratio of the internal tube size to the external one,S)of MCDT were optimized by adopting artificial neural networks(ANN)and genetic algorithm(GA)techniques.Based on the multi-objective optimization results,the optimum dimension parameters were found to beθ=7.9o,S=0.46 andθ=8o,S=0.74 from the minimum distance selection(MDS)and COPRAS methods,respectively.

Handover initiation performance of a new multi-cell cellular configuration with a developed base-station multi-beam antenna

A new multi-cell cellular configuration networks is provided for analysis of handover initiation probability, which is based on multi-beam base-station antenna splitting in the elevation-radiating plane. The sum of the received signal power in the mobile station, including both desired and interference signal power, has been introduced into the handover initiation algorithm. Along with the idea, we present three models of handover initiation algorithm with the shadowing process of Gaussian distribution. The formulation of handover initiation probability of those algorithms is also analyzed. The validity of the presented models has been checked through the comparison with simulation results. The results present the performance characteristics of handover initiation vary with cluster number and base-station antenna elevation angle.

ICI Management for Efficient Radio Resource Allocation in Multi-Cell OFDMA Networks

Two Inter-cell Interference (ICI) management algorithms: Primary Interference Balancing (PIB) algorithm and Interfering Bits Loading Avoidance (IBLA) algorithm are proposed for canceling the ICI effects which the existing efficient radio resource allocation algorithms do not consider. The efficient radio resource allocation algorithm, i.e., Pre-assignment and Reassignment (PR) algorithm, obtains the lowest complexity and achieves good throughput performance in single cell OFDMA system. However, in multi-cell multi-sector OFDMA networks, PR algorithm is not applicable because it does not take ICI into consideration. The proposed PIB algorithm balances the number of loading bits for the desired User Equipment (UE) and the major interfering UE, as well as optimizes the SINR performance; meanwhile, IBLA avoids loading certain number of interfering bits which would make SINR unqualified. Simulations confirm the ICI management effectiveness and feasibility of both the proposals.

Limited Feedback Bit Allocation for Cooperative Multi-cell Systems with Multi- user MIMO

For the cooperative multi-cell systems with muki-user MIMO, a new limited feedback bit allocation scheme is proposed to minimize the rate loss caused by quantization error. In the proposed scheme, the Channel State Information （CSI） feedback of cell-edge user for the local service cell and the adjacent interference cell are separately quantized. Based on the upper bound of the rate loss of cell-edge user due to the limited feedback, the number of feedback bits for quantized CSI of the local service cell and the adjacent cell are optimized with the fixed total bits of the limited feedback. The simulation shows that our proposed scheme of feedback bits allocation efficiently decreases the interference and increases the rate of systems compared with that of equal bits allocation and those of other allocations.

A virtual delay queue-based backpressure scheduling for multi-cell cellular edge computing systems

To further improve delay performance in multi-cell cellular edge computing systems,a new delay-driven joint communication and computing resource BP(backpressure)scheduling algorithm is proposed.Firstly,the mathematical models of the communication delay and computing delay in multi-cell cellular edge computing systems are established and expressed as virtual delay queues.Then,based on the virtual delay models,a novel joint wireless subcarrier and virtual machine resource scheduling algorithm is proposed to stabilize the virtual delay queues in the framework of the BP scheduling principle.Finally,the delay performance of the proposed virtual queue-based BP scheduling algorithm is evaluated via simulation experiments and compared with the traditional queue length-based BP scheduling algorithm.Results show that under the considered simulation parameters,the total delay of the proposed BP scheduling algorithm is always lower than that of the traditional queue length-based BP scheduling algorithm.The percentage of the reduced total delay can be as high as 51.29%when the computing resources are heterogeneously configured.Therefore,compared with the traditional queue length-based BP scheduling algorithms,the proposed virtual delay queue-based BP scheduling algorithm can further reduce delay in multi-cell cellular edge computing systems.

Beam interference suppression in multi-cell millimeter wave communications

Due to the increase in the number of users, beam switching is used for suppressing interference, which leads to higher computational complexity in multi-cell millimeter wave communications. In order to resolve this problem, a beam interference model is introduced, and a lower complexity beam interference suppression algorithm based on user grouping is proposed. The proposed algorithm operates beam switching and mnlti-cell cooperative transmission for a part of the users when there exists beam interference due to high user density. In particular, considering the distinct interference suffered by each user, the proposed dual-threshold user grouping method can effectively solve the frequent switching problem at the base station caused by multi-cell cooperative transmission in multi-cell environments. Simulation results show that the proposed algorithm can reduce the computational complexity of beam switching and approach ideal system capacity, compared with conventional interference suppression algorithms that do not involve grouping of users.

A comparative crashworthiness analysis of multi-cell polygonal tubes under axial and oblique loads

In order to investigate the energy absorption characteristics of multi-cell polygonal tubes with different cross-sectional configurations,firstly,the theoretical formulae of the mean crushing force under axial load for four multi-cell polygonal tubes were derived by combining the Super Folding Element theory with Zhang’s research results.These formulae can be used to validate the numerical model and quickly evaluate the energy absorption ability of multi-cell polygonal tubes.Furthermore,a comparative study on the energy absorption performance of eight multi-cell polygonal tubes under axial and oblique loads was conducted.The results show that all tubes have a stable mixed deformation mode under axial load.The multi-cell decagon tube has better energy-absorption ability compared with other tubes.Whenθis less than 10°,all the tubes maintain a stable deformation mode,and the multi-cell decagon tube also has the biggest crushing force efficiency and specific energy absorption among these eight tubes;meanwhile compared with the results atθ=0°,the specific energy absorption of all tubes decreases by about 8%-21%,while the crushing force efficiency increases by 20%-56%.However,at large angles 20°and 30°,all of the tubes collapse in bending modes and lose their effectiveness at energy absorption.

Resource provisioning for computation and communication in multi-cell wireless networks

The convergence of computation and communication at network edges plays a significant role in coping with computation-intensive and delay-critical tasks.During the stage of network planning,the resource provisioning problem for edge nodes has to be investigated to provide prior information for future system configurations.This work focuses on how to quantify the computation capabilities of access points at network edges when provisioning resources of computation and communication in multi-cell wireless networks.The problem is formulated as a discrete and non-convex minimization problem,where practical constraints including delay requirements,the inter-cell interference,and resource allocation strategies are considered.An iterative algorithm is also developed based on decomposition theory and fractional programming to solve this problem.The analysis shows that the necessary computation capability needed for certain delay guarantee depends on resource allocation strategies for delay-critical tasks.For delay-tolerant tasks,it can be approximately estimated by a derived lower bound which ignores the scheduling strategy.The efficiency of the proposed algorithm is demonstrated using numerical results.

Analysis of RF Feedback Chain Isolation in Wireless Co-Time Co-Frequency Full Duplex

By employing a radio frequency(RF) feedback chain, the self-interference can be canceled efficiently in co-time co-frequency full duplex(CCFD). However, the evitable signal crosstalk which is caused by the imperfect RF feedback chain isolation usually damages the self-interference cancelation(SIC) performance. To deal with this problem, firstly, we analyze the impact of RF feedback chain isolation on SIC performance. Then a digital preprocessing scheme with RF feedback chain is proposed in the multiple-antenna CCFD architecture. Using both analytical and experimental methods, we find that the proposed scheme achieves a better performance on SIC.

Multi Multi-Cell Uplink Interference Management Cell Uplink Interference Management: A Distributed Power Control Method

This paper investigates a multi-cell uplink network,where the orthogonal frequency division multiplexing(OFDM)protocol is considered to mitigate the intra-cell interference.An optimization problem is formulated to maximize the user sup-porting ratio for the uplink multi-cell system by optimizing the transmit power.This paper adopts the user supporting ratio as the main performance metric.Our goal is to improve the user supporting ratio of each cell.Since the formulated optimization problem is non-convex,it cannot be solved by using traditional convex-based optimi-zation methods.Thus,a distributed method with low complexity and a small amount of multi-cell interaction is proposed.Numerical results show that a notable perfor-mance gain achieved by our proposed scheme compared with the traditional one is without inter-cell interaction.

Resource Allocation for Channel Estimation in Reconfigurable Intelligent Surface-Aided Multi-Cell Networks

Reconfigurable intelligent surface(RIS)is a promising solution to deal with the blockage-sensitivity of millimeter wave band and reduce the high energy consumption caused by network densification. However, deploying large scale RISs may not bring expected performance gain due to significant channel estimation overhead and non-negligible reflected interference.In this paper,we derive the analytical expressions of the coverage probability, area spectrum efficiency(ASE)and energy efficiency (EE)of a downlink RIS-aided multi-cell network.In order to optimize the network performance, we investigate the conditions for the optimal number of training symbols of each antenna-to-antenna and antenna-to-element path (referred to as the optimal unit training overhead) in channel estimation.Our study shows that:1)RIS deployment is not“the more, the better”, only when blockage objects are dense should one deploy more RISs;2) the coverage probability is maximized when the unit training overhead is designed as large as possible;3)however,the ASE-and-EE-optimal unit training overhead exists. It is a monotonically increasing function of the frame length and a monotonically decreasing function of the average signal-to-noise-ratio (in the high signal-to-noise-ratio region). Additionally,the optimal unit training overhead is smaller when communication nodes deploy particularly few or many antennas.

Energy efficiency optimization for a RIS-assisted multi-cell communication system based on a practical RIS power consumption model

Reconfigurable intelligent surface(RIS)is widely accepted as a potential technology to assist in communication between base stations(BSs)and users in edge areas.We study the energy efficiency of a RIS-assisted multi-cell communication system with a realistic RIS power consumption model.With the goal of maximizing the energy efficiency of the system,we optimize the transmit beamforming vectors at the BS and the RIS phase shift matrix by a proposed alternative optimization algorithm.First,the transmit beamforming vector is optimized by solving the transformed weighted minimum mean square error(WMMSE)problem.Subsequently,to solve the inconvenience incurred by the discrete relationship between the RIS reflecting unit power consumption and its discrete phase shift,we use a continuous function to approximate their relationship.With this approximation,we can use the majorization minimization(MM)technique to optimize the continuous RIS phase shifts,and then quantize the obtained phase shifts to discrete ones.Simulation results demonstrate that the energy efficiency of the system is effectively optimized by the proposed algorithm.

Energy Absorption Performance of Bionic Multi-cell Tubes Inspired by Shrimp chela

This research introduced the design,analysis and optimization of bionic shrimp chela multi-cell tubes(BSCMTs)in bending by embedding an arthropod's microstructure inside a thin-walled square structure.A three-point impact bending finite element model was,in the first instance,correlated with physical tests and then modified to assess the energy absorption performance of bionic multi-cell tubes considering initial peak force,specific energy absorption and mean crushing force.Following a complex proportional assessment(COPRAS)approach and optimization phases,results demonstrated that the BSCMT with a W-shape section had the best energy absorption characteristics and should be considered in future as a possible contender for vehicle B-pillar structures that are subjected to bending and require excellent energy absorption properties to protect the occupants in high-speed impact collisions.