The co-firing of coal and biomass in oxy-fuel fluidized beds is one of the most promising technologies for capturing CO2.This technology has attracted wide attention from academia and industry in recent years as a neg...The co-firing of coal and biomass in oxy-fuel fluidized beds is one of the most promising technologies for capturing CO2.This technology has attracted wide attention from academia and industry in recent years as a negative emission method to capture CO2 produced by carbon contained in biomass.In the past decades,many studies have been carried out regarding experiments and numerical simulations under oxy-fuel combustion conditions.This paper firstly briefly discusses the techno-economic viability of the biomass and coal co-firing with oxycombustion and then presents a review of recent advancements involving experimental research and computational fluid dynamics(CFD)simulations in this field.Experimental studies on mechanism research,such as thermogravimetric analysis and tube furnace experiments,and fluidized bed experiments based on oxy-fuel fluidized beds with different sizes as well as the main findings,are summarized as a part of this review.It has been recognized that CFD is a useful approach for understanding the behaviors of the co-firing of coal and biomass in oxyfuel fluidized beds.We summarize a recent survey of published CFD research on oxy-fuel fluidized bed combustion,which categorized into Eulerian and Lagrangian methods.Finally,we discuss the challenges and interests for future research.展开更多
Waste biomass is always generated during the production process in industries. The ordinary way to get rid of the waste biomass is to send them to landfill or burn it in the open field. The waste may potentially be us...Waste biomass is always generated during the production process in industries. The ordinary way to get rid of the waste biomass is to send them to landfill or burn it in the open field. The waste may potentially be used for co-firing with coal to save fossil fuel consumption and also reduce net carbon emissions. In this case study, the bio-waste from a Nicotiana Tahacum （NT） pre-treatment plant is used as the biomass to co-fire with coal. The samples of NT wastes were analysed. It was found that the wastes were of the relatively high energy content which were suitable for co-firing with coal. To investigate the potential and benefits for adding NT wastes to a Fluidised Bed Combustion （FBC） boiler in the plant, detailed modelling and simulation are carried out using the European Coal Liquefaction Process Simulation and Evaluation （ECLIPSE） process simulation package. The feedstock blending ratios of NT waste to coal studied in this work are varied from 0% to 30%. The results show that the addition of NT wastes may decrease the emissions of CO2 and SOx without reducing the boiler performance.展开更多
With increased awareness of the large-scale CO_(2) emissions from the cement industry,there has been growing focus on greenhouse gas reduction strategies.Among all these strategies,fuel substitution using biomass fuel...With increased awareness of the large-scale CO_(2) emissions from the cement industry,there has been growing focus on greenhouse gas reduction strategies.Among all these strategies,fuel substitution using biomass fuel is extensively used to achieve CO_(2) zero-emission in cement production.Due to the avoidable high-temperature-generated thermal nitrogen oxides during cement production,research on the impact of biomass application on nitrogen oxide emissions shall be carried out.Three types of biomass fuel and bituminous coal were used to investigate the NO reduction characteristics under different O_(2) concentrations on experimental benches.It was found that the change in oxygen concentration from 9% to 1% increased the reaction time in the reactor from 555 s to 1425 s,which means the increase in oxygen concentration can lead to shorter reaction time,and correspondingly,the existing time of nitric oxide in the flue gas is also shortened,but the peak value of nitric oxide rises,during the process of O_(2) concentration changing from 1% to 9%,the peak NO concentration in the flue gas increased from 5.4×10^(-5) to 1.05×10^(-4).An increase in O_(2) concentration greatly reduces the total reduction of NO and the minimum change in NO concentration.The peak NO concentration during the combustion process of corn stalk is 4.56×10^(-4),which is approximately 7 times higher than that of coal,and it is caused by the high amount of N in corn stalk.The addition of raw meal has an inhibitory effect on the reduction of NO:after adding raw meal,the effective reduction time of NO by fuel decreased by about 20%,but adding raw meal raises CO_(2) concentration of fuel gas in the early stage of reaction.展开更多
Alabama imports coal from other states to generate electricity. This paper assessed the direct and indirect economic impacts of wood pellet production to be co-fired with coal for power generation in Alabama. Four siz...Alabama imports coal from other states to generate electricity. This paper assessed the direct and indirect economic impacts of wood pellet production to be co-fired with coal for power generation in Alabama. Four sizes of wood pellet plants and regional input-output models were used for the analysis. The results showed that the economic impact increases with the size of the plant. Wood pellet production will have a multiplier effect on the economy especially, forest-related services, retail stores, the health service industry, and tax revenue for the government. Domestic wood pellet production can reduce the use of imported coal, allow the use of local woody biomass, and create economic activities in Alabama’s rural communities. Policies that support the production of wood pellet will serve to encourage the use of wood for power generation and support the rural economies.展开更多
It is known that simple adding of wood allows one to accelerate the ignition of powder mixtures compared to the situation when pure coal is used.This study focuses on testing the hypothesis about the effect of co-mill...It is known that simple adding of wood allows one to accelerate the ignition of powder mixtures compared to the situation when pure coal is used.This study focuses on testing the hypothesis about the effect of co-milling coal and wood on their co-firing:is the case of composite powdered fuels should ensure the maximum possible efficiency of heat and mass transfer?Firstly,we will show that co-milling of coal and wood leads not independent size reduction of two materials but gives composite powder-coal-covered wood.For the composite fuel further reduction of the ignition delay time of air suspension and reduction of the limit volume concentration required for flame propagation have demonstrated.Obtained synergy also manifests in thermogravimetry.Here we propose a simple method for analyzing the mass loss curves.For any coal-to-wood sawdust ratio,combustion of the composites and mixtures both can be viewed as a weighted sum of the curves of individual components.But only in the case of composites calculated sawdust content is higher than the actual one:the mass loss is redistributed towards the stage occurring at lower temperatures due to geometry of wood/coal contact.展开更多
基金supported by the Key Program of the National Natural Science Foundation of China(51736002)the Natural Science Foundation of Jiangsu Province(BK20180386).
文摘The co-firing of coal and biomass in oxy-fuel fluidized beds is one of the most promising technologies for capturing CO2.This technology has attracted wide attention from academia and industry in recent years as a negative emission method to capture CO2 produced by carbon contained in biomass.In the past decades,many studies have been carried out regarding experiments and numerical simulations under oxy-fuel combustion conditions.This paper firstly briefly discusses the techno-economic viability of the biomass and coal co-firing with oxycombustion and then presents a review of recent advancements involving experimental research and computational fluid dynamics(CFD)simulations in this field.Experimental studies on mechanism research,such as thermogravimetric analysis and tube furnace experiments,and fluidized bed experiments based on oxy-fuel fluidized beds with different sizes as well as the main findings,are summarized as a part of this review.It has been recognized that CFD is a useful approach for understanding the behaviors of the co-firing of coal and biomass in oxyfuel fluidized beds.We summarize a recent survey of published CFD research on oxy-fuel fluidized bed combustion,which categorized into Eulerian and Lagrangian methods.Finally,we discuss the challenges and interests for future research.
基金supported by a joint UK-China research program funded by the Engineering and Physical Sciences Research Council of the UK and the international collaboration funding from Guizhou Science and Technology Department(No.Qian-Ke-He-Wai G[2009]700110)
文摘Waste biomass is always generated during the production process in industries. The ordinary way to get rid of the waste biomass is to send them to landfill or burn it in the open field. The waste may potentially be used for co-firing with coal to save fossil fuel consumption and also reduce net carbon emissions. In this case study, the bio-waste from a Nicotiana Tahacum （NT） pre-treatment plant is used as the biomass to co-fire with coal. The samples of NT wastes were analysed. It was found that the wastes were of the relatively high energy content which were suitable for co-firing with coal. To investigate the potential and benefits for adding NT wastes to a Fluidised Bed Combustion （FBC） boiler in the plant, detailed modelling and simulation are carried out using the European Coal Liquefaction Process Simulation and Evaluation （ECLIPSE） process simulation package. The feedstock blending ratios of NT waste to coal studied in this work are varied from 0% to 30%. The results show that the addition of NT wastes may decrease the emissions of CO2 and SOx without reducing the boiler performance.
基金financially supported by Strategic Priority Research Program of the Chinese Academy of Sciences (Grant No.XDA29020200)。
文摘With increased awareness of the large-scale CO_(2) emissions from the cement industry,there has been growing focus on greenhouse gas reduction strategies.Among all these strategies,fuel substitution using biomass fuel is extensively used to achieve CO_(2) zero-emission in cement production.Due to the avoidable high-temperature-generated thermal nitrogen oxides during cement production,research on the impact of biomass application on nitrogen oxide emissions shall be carried out.Three types of biomass fuel and bituminous coal were used to investigate the NO reduction characteristics under different O_(2) concentrations on experimental benches.It was found that the change in oxygen concentration from 9% to 1% increased the reaction time in the reactor from 555 s to 1425 s,which means the increase in oxygen concentration can lead to shorter reaction time,and correspondingly,the existing time of nitric oxide in the flue gas is also shortened,but the peak value of nitric oxide rises,during the process of O_(2) concentration changing from 1% to 9%,the peak NO concentration in the flue gas increased from 5.4×10^(-5) to 1.05×10^(-4).An increase in O_(2) concentration greatly reduces the total reduction of NO and the minimum change in NO concentration.The peak NO concentration during the combustion process of corn stalk is 4.56×10^(-4),which is approximately 7 times higher than that of coal,and it is caused by the high amount of N in corn stalk.The addition of raw meal has an inhibitory effect on the reduction of NO:after adding raw meal,the effective reduction time of NO by fuel decreased by about 20%,but adding raw meal raises CO_(2) concentration of fuel gas in the early stage of reaction.
文摘Alabama imports coal from other states to generate electricity. This paper assessed the direct and indirect economic impacts of wood pellet production to be co-fired with coal for power generation in Alabama. Four sizes of wood pellet plants and regional input-output models were used for the analysis. The results showed that the economic impact increases with the size of the plant. Wood pellet production will have a multiplier effect on the economy especially, forest-related services, retail stores, the health service industry, and tax revenue for the government. Domestic wood pellet production can reduce the use of imported coal, allow the use of local woody biomass, and create economic activities in Alabama’s rural communities. Policies that support the production of wood pellet will serve to encourage the use of wood for power generation and support the rural economies.
文摘It is known that simple adding of wood allows one to accelerate the ignition of powder mixtures compared to the situation when pure coal is used.This study focuses on testing the hypothesis about the effect of co-milling coal and wood on their co-firing:is the case of composite powdered fuels should ensure the maximum possible efficiency of heat and mass transfer?Firstly,we will show that co-milling of coal and wood leads not independent size reduction of two materials but gives composite powder-coal-covered wood.For the composite fuel further reduction of the ignition delay time of air suspension and reduction of the limit volume concentration required for flame propagation have demonstrated.Obtained synergy also manifests in thermogravimetry.Here we propose a simple method for analyzing the mass loss curves.For any coal-to-wood sawdust ratio,combustion of the composites and mixtures both can be viewed as a weighted sum of the curves of individual components.But only in the case of composites calculated sawdust content is higher than the actual one:the mass loss is redistributed towards the stage occurring at lower temperatures due to geometry of wood/coal contact.
