Active explosion barrier performance against methane and coal dust explosions

Preventing the propagation of methane or coal dust explosions through the use of active explosion-suppression systems remains one of the most underutilised explosion controls in underground coal mines. As part of the effort to develop better technologies to safeguard mines, the use of active barrier systems was investigated at Kloppersbos in South Africa. The system is designed to meet the requirements of the European Standard （EN 14591-4 2007） as well as the Mine Safety Standardisation in the Ministry of Coal Industry, Coal Industrial 1 Standard of the Peoples Republic of China （MT 694-1997）. From the tests conducted, it can be concluded that the ExploSpot System was successful in stopping flame propagation for both methane and methane and coal dust hybrid explosions when ammonium phosphate powder was used as the suppression material. The use of this barrier will provide coal mine management with an additional explosion control close to the point of ignition and may find application within longwall faces further protecting mines against the risk of an explosion propagating throughout a mine.

Bioleaching of vanadium from barren stone coal and its effect on the transition of vanadium speciation and mineral phase

This study determined the optimal conditions required to obtain maximum vanadium extraction and examined the transition of mineral phases and vanadium speciation during the bioleaching process. Parameters including the initial p H value, initial Fe^(2+) concentration, solid load, and inoculum quantity were examined. The results revealed that 48.92 wt% of the vanadium was extracted through bioleaching under optimal conditions. Comparatively, the chemical leaching yield(H_2SO_4, pH 2.0) showed a slower and milder increase in vanadium yield. The vanadium bioleaching yield was 35.11 wt% greater than the chemical leaching yield. The Community Bureau of Reference(BCR) sequential extraction results revealed that 88.62 wt% of vanadium existed in the residual fraction. The bacteria substantially changed the distribution of the vanadium speciation during the leaching process, and the residual fraction decreased to 48.44 wt%. The X-ray diffraction(XRD) and Fourier transform infrared(FTIR) results provided evidence that the crystal lattice structure of muscovite was destroyed by the bacteria.

Thermogravimetric study of the effect of a PVA oxygen-insulating barrier on the spontaneous combustion of coal

Coal samples in the air for three months were characterized by Thermogravimetric Analysis (TGA). The effect of a PVA oxygen-insulating barrier on the spontaneous combustion of coal was examined. The moisture loss activation energy, oxidation activation energy and combustion activation energy were calculated by an integral method using the Coats-Redfen formula. The results show that the tendency for spontaneous combustion of three coal samples (judged by the activation energy) falls in the order: CYW>YJL>SW. The oxidation activation energy and combustion activation energy of coal protected by the PVA oxygen-insulating barrier increased. A significant increase in the combustion activation energy was noted, especially for the CYW coal where the in-crease was 28.53 kJ/mol. Hence, oxidation of the protected coal samples was more difficult. The PVA oxygen-insulating barrier helps to prevent spontaneous combustion of the coal.

Water‑immersion softening mechanism of coal rock mass based on split Hopkinson pressure bar experiment

The coal mining process is afected by various water sources such as groundwater and coal seam water injection.Understanding the dynamic mechanical parameters of water-immersed coal is helpful for coalmine safe production.The impact compression tests were performed on coal with diferent moisture contents by using theϕ50 mm Split Hopkinson Pressure Bar(SHPB)experimental system,and the dynamic characteristics and energy loss laws of water-immersed coal with diferent compositions and water contents were analyzed.Through analysis and discussion,it is found that:(1)When the moisture content of the coal sample is 0%,30%,60%,the stress,strain rate and energy frst increase and then decrease with time.(2)When the moisture content of the coal sample increases from 30%to 60%,the stress“plateau”of the coal sample becomes more obvious,resulting in an increase in the compressive stress stage and a decrease in the expansion stress stage.(3)The increase of moisture content of the coal sample will afect its impact deformation and failure mode.When the moisture content is 60%,the incident rod end and the transmission rod end of the coal sample will have obvious compression failure,and the middle part of the coal sample will also experience expansion and deformation.(4)The coal composition ratio suitable for the coal immersion softening impact experiment is optimized.

Coal Liquefaction by Using Dielectric Barrier Discharge Plasma

An innovative method for coal liquefaction by using dielectric barrier discharge （DBD） plasma in a short reaction time was developed. Using tetralin as the reaction medium, DBD plasma as the energy source, and a reaction time of 10 min at 140 ℃, up to 10% of coal was converted to liquid material. The results showed the feasibility of coal＇s liquefaction by DBD plasma under relatively moderate conditions. Simultaneously, it was clarified that the effect of DBD plasma treatment was opposed to the thermal effect of heating. An acid plasma sheath could be formed on the coal powder surface in DBD conditions, liquefied reactions could be carried out in the absence of inorganic acid, and the products were nearly neutral and with low causticity.

Organic geochemical characteristics of bark coal in Changguang area: evidence from aromatic hydrocarbons

Seven coal samples were collected from Changguang area,a typical bark coal field in Zhejiang Province,China.The organic geochemical characteristics and depositional environment of bark coal were studied by Rock–Eval pyrolysis,gas chromatography(GC),and gas chromatography–mass spectrometry(GC–MS)analysis.The results show that all samples are type II kerogen.The values of total organic carbon(TOC),potential yield(S1+S2),and hydrogen index of these samples ranged from 65.80 wt%–87.00 wt%,170.43–232.89 mg HC/g,and 234–295 mg HC/g TOC,respectively.In aromatic hydrocarbons compounds of bark coal samples,the phenanthrene series occupy the largest proportion(43.48%–53.74%),followed by the dibenzothiophens(7.33%–16.53%).The distributions of naphthalenes,diphenyls,and chrysene of the samples indicate the source inputs are mainly derived from terrestrial higher plants.Furthermore,the ratios of naphthalene and phenanthrene series compounds reveal the samples are in the mature stage.Some biomarkers(Pr/Ph and C35/C31–35 homohopane),aromatic hydrocarbons(fluorene,dibenzofuran and dibenzothiophene),and high inertinite contents(14.7%–41.8%)suggest that bark coal was formed under relatively oxic conditions and was influenced by marine or brackish lakes environment.

Acid-base buffer effect of fulvic acid and barium fulvate from weathered coal

The acid-base buffer characteristics of fulvic acid (FA) and barium fulvate (BaFA)were analyzed. Each share of the sample or model agents (phthalic acid and salicylic acid)were separately mixed into a series of shares of dilute solutions of HCI or NaOH with a series of concentration. The original pH values of the solutions were arranged from 2 to 13.Final balanced pH of each share was measured. The pH changes show that FA and BaFApossess buffer ability, whereas the model agents do not. The tendency of balanced pHvalues was 5.4 for FA and 7.4 for BaFA, whereas the original pH was 4.0-8.5; balancedpH changed little. At room temperature, the maximum buffer capacities were as follows:18.11 mmol hydroxyl per gram FA, 11.25 mmol hydroxyl per gram BaFA, 1.19 mmol protonper gram FA, and 1.45 mmol proton per gram BaFA. Mathematics analysis shows thatlogarithm of buffer capacities of FA and BaFA is linearly dependent on original pH. Compared with BaFA and model agents, it is concluded that FA buffer capacity against hydroxylrelies not only on its acidic groups, BaFA buffer capacity against hydroxyl does not rely onits acidic groups, and FA buffer capacity against proton is not related with its carboxyl andphenolic hydroxyl group. The pH values of FA-water solutions with different concentrationsfrom 1 to 10 grams per liter were measured. Their pH values were slightly affected by itsconcentration. Thus, FA possesses a much stronger buffer ability against water dilutionthan common buffer agent. All the pH values of FA water solutions were very nearby 5.4,just the same as the balanced pH tendency for adding FA.

Structural properties of residual carbon in coal gasification fine slag and their influence on flotation separation and resource utilization:A review

Coal gasification fine slag(FS)is a typical solid waste generated in coal gasification.Its current disposal methods of stockpil-ing and landfilling have caused serious soil and ecological hazards.Separation recovery and the high-value utilization of residual carbon(RC)in FS are the keys to realizing the win-win situation of the coal chemical industry in terms of economic and environmental benefits.The structural properties,such as pore,surface functional group,and microcrystalline structures,of RC in FS(FS-RC)not only affect the flotation recovery efficiency of FS-RC but also form the basis for the high-value utilization of FS-RC.In this paper,the characteristics of FS-RC in terms of pore structure,surface functional groups,and microcrystalline structure are sorted out in accordance with gasification type and FS particle size.The reasons for the formation of the special structural properties of FS-RC are analyzed,and their influence on the flotation separation and high-value utilization of FS-RC is summarized.Separation methods based on the pore structural characterist-ics of FS-RC,such as ultrasonic pretreatment-pore-blocking flotation and pore breaking-flocculation flotation,are proposed to be the key development technologies for improving FS-RC recovery in the future.The design of low-cost,low-dose collectors containing polar bonds based on the surface and microcrystalline structures of FS-RC is proposed to be an important breakthrough point for strengthening the flotation efficiency of FS-RC in the future.The high-value utilization of FS should be based on the physicochemical structural proper-ties of FS-RC and should focus on the environmental impact of hazardous elements and the recyclability of chemical waste liquid to es-tablish an environmentally friendly utilization method.This review is of great theoretical importance for the comprehensive understand-ing of the unique structural properties of FS-RC,the breakthrough of the technological bottleneck in the efficient flotation separation of FS,and the expansion of the field of the high value-added utilization of FS-RC.

Geological characteristics and exploration breakthroughs of coal rock gas in Carboniferous Benxi Formation,Ordos Basin,NW China

To explore the geological characteristics and exploration potential of the Carboniferous Benxi Formation coal rock gas in the Ordos Basin,this paper presents a systematic research on the coal rock distribution,coal rock reservoirs,coal rock quality,and coal rock gas features,resources and enrichment.Coal rock gas is a high-quality resource distinct from coalbed methane,and it has unique features in terms of burial depth,gas source,reservoir,gas content,and carbon isotopic composition.The Benxi Formation coal rocks cover an area of 16×104km^(2),with thicknesses ranging from 2 m to 25 m,primarily consisting of bright and semi-bright coals with primitive structures and low volatile and ash contents,indicating a good coal quality.The medium-to-high rank coal rocks have the total organic carbon(TOC)content ranging from 33.49%to 86.11%,averaging75.16%.They have a high degree of thermal evolution(Roof 1.2%-2.8%),and a high gas-generating capacity.They also have high stable carbon isotopic values(δ13C1of-37.6‰to-16‰;δ13C2of-21.7‰to-14.3‰).Deep coal rocks develop matrix pores such as gas bubble pores,organic pores,and inorganic mineral pores,which,together with cleats and fractures,form good reservoir spaces.The coal rock reservoirs exhibit the porosity of 0.54%-10.67%(averaging 5.42%)and the permeability of(0.001-14.600)×10^(-3)μm^(2)(averaging 2.32×10^(-3)μm^(2)).Vertically,there are five types of coal rock gas accumulation and dissipation combinations,among which the coal rock-mudstone gas accumulation combination and the coal rock-limestone gas accumulation combination are the most important,with good sealing conditions and high peak values of total hydrocarbon in gas logging.A model of coal rock gas accumulation has been constructed,which includes widespread distribution of medium-to-high rank coal rocks continually generating gas,matrix pores and cleats/fractures in coal rocks acting as large-scale reservoir spaces,tight cap rocks providing sealing,source-reservoir integration,and five types of efficient enrichment patterns(lateral pinchout complex,lenses,low-amplitude structures,nose-like structures,and lithologically self-sealing).According to the geological characteristics of coal rock gas,the Benxi Formation is divided into 8 plays,and the estimated coal rock gas resources with a buried depth of more than 2000 m are more than 12.33×10^(12)m^(3).The above understandings guide the deployment of risk exploration.Two wells drilled accordingly obtained an industrial gas flow,driving the further deployment of exploratory and appraisal wells.Substantial breakthroughs have been achieved,with the possible reserves over a trillion cubic meters and the proved reserves over a hundred billion cubic meters,which is of great significance for the reserves increase and efficient development of natural gas in China.

Numerical analysis on the factors affecting post-peak characteristics of coal under uniaxial compression

The post-peak characteristics of coal serve as a direct reflection of its failure process and are essential parameters for evaluating brittleness and bursting liability.Understanding the significant factors that influence post-peak characteristics can offer valuable insights for the prevention of coal bursts.In this study,the Synthetic Rock Mass method is employed to establish a numerical model,and the factors affecting coal post-peak characteristics are analyzed from four perspectives:coal matrix mechanical parameters,structural weak surface properties,height-to-width ratio,and loading rate.The research identifies four significant influencing factors:deformation modulus,density of discrete fracture networks,height-to-width ratio,and loading rate.The response and sensitivity of post-peak characteristics to single-factor and multi-factor interactions are assessed.The result suggested that feasible prevention and control measures for coal bursts can be formulated through four approaches:weakening the mechanical properties of coal pillars,increasing the number of structural weak surfaces in coal pillars,reducing the width of coal pillars,and optimizing mining and excavation speed.The efficacy of measures aimed at weakening the mechanical properties of coal is successfully demonstrated through a case study on coal burst prevention using large-diameter borehole drilling.

Disasters of gas-coal spontaneous combustion in goaf of steeply inclined extra-thick coal seams

In light of the escalating global energy imperatives,mining of challenging-to-access resources,such as steeply inclined extra-thick coal seams(SIEC),has emerged as one of the future trends within the domain of energy advancement.However,there is a risk of gas and coal spontaneous combustion coupling disasters(GCC)within the goaf of SIEC due to the complex goaf structure engendered by the unique mining methodologies of SIEC.To ensure that SIEC is mined safely and efficiently,this study conducts research on the GCC within the goaf of SIEC using field observation,theoretical analysis,and numerical modeling.The results demonstrate that the dip angle,the structural dimensions in terms of width-to-length ratio,and compressive strength of the overlying rock are the key factors contributing to the goaf instability of SIEC.The gangue was asymmetrically filled,primarily accumulating within the central and lower portions of the goaf,and the filling height increased proportionally with the advancing caving height,the expansion coefficient,and the thickness of the surrounding rock formation.The GCC occurs in the goaf of SIEC,with an air-return side range of 41 m and an air-intake side range of 14 m,at the intersection area of the“<”-shaped oxygen concentration distribution(coal spontaneous combustion)and the“>”-shaped gas concentration distribution(gas explosion).The optimal nitrogen flow rate is 1000 m3/h with an injection port situated 25 m away from the working face for the highest nitrogen diffusion efficacy and lowest risk of gas explosion,coal spontaneous combustion,and GCC.It has significant engineering applications for ensuring the safe mining of SIEC threatened by the GCC.

Stability analysis of longwall top-coal caving face in extra-thick coal seams based on an innovative numerical hydraulic support model

The relationship between support and surrounding rock is of great significance to the control of surrounding rock in mining process.In view of the fact that most of the existing numerical simulation methods construct virtual elements and stress servo control to approximately replace the hydraulic support problem,this paper establishes a new numerical model of hydraulic support with the same working characteristics as the actual hydraulic support by integrating numerical simulation software Rhino,Griddle and FLAC3D,which can realize the simulation of different working conditions.Based on this model,the influence mechanism of the supporting strength of hydraulic support on surrounding rock stress regulation and coal stability in front of the top coal caving face in extra thick coal seam were researched.Firstly,under different support intensity,the abutment pressure of the bearing coal and the coal in front of it presents the “three-stage”evolution characteristics.The influence range of support intensity is 15%–30%.Secondly,1.5 MPa is the upper limit of impact that the support strength can have on the front coal failure area.Thirdly,within a displacement range of 2.76 m from the coal wall,a support strength of1.5 MPa provides optimal control of the horizontal displacement of the coal.

Theoretical analysis of hydrogen solubility in direct coal liquefaction solvents

The cyclic hydrogenation technology in a direct coal liquefaction process relies on the dissolved hydrogen of the solvent or oil participating in the hydrogenation reaction.Thus,a theoretical basis for process optimization and reactor design can be established by analyzing the solubility of hydrogen in liquefaction solvents.Experimental studies of hydrogen solubility in liquefaction solvents are challenging due to harsh reaction conditions and complex solvent compositions.In this study,the composition and content of liquefied solvents were analyzed.As model compounds,hexadecane,toluene,naphthalene,tetrahydronaphthalene,and phenanthrene were chosen to represent the liquefied solvents in chain alkanes and monocyclic,bicyclic,and tricyclic aromatic hydrocarbons.The solubility of hydrogen X(mol/mol)in pure solvent components and mixed solvents(alkanes and aromatics mixed in proportion to the chain alkanes+bicyclic aromatic hydrocarbons,bicyclic saturated aromatic hydrocarbons+bicyclic aromatic hydrocarbons,and bicyclic aromatic hydrocarbons+compounds containing het-eroatoms composed of mixed components)are determined using Aspen simulation at temperature and pressure conditions of 373–523 K and 2–10 MPa.The results demonstrated that at high temperatures and pressures,the solubility of hydrogen in the solvent increases with the increase in temperature and pressure,with the pressure having a greater impact.Further-more,the results revealed that hydrogen is more soluble in straight-chain alkanes than in other solvents,and the solubility of eicosanoids reaches a maximum of 0.296.The hydrogen solubility in aromatic ring compounds decreased gradually with an increase in the aromatic ring number.The influence of chain alkanes on the solubility of hydrogen predominates in a mixture of solvents with different mixing ratios of chain alkanes and aromatic hydrocarbons.The solubility of hydrogen in mixed aromatic solvents is less than that in the corresponding single solvents.Hydrogen is less soluble in solvent compounds containing heteroatoms than in compounds without heteroatoms.

Thermally-induced cracking behaviors of coal reservoirs subjected to cryogenic liquid nitrogen shock

The benefits of using cryogenic liquid nitrogen shock to enhance coal permeability have been confirmed from experimental perspectives.In this paper,we develop a fully coupled thermo-elastic model in combination with the strain-based isotropic damage theory to uncover the cooling-dominated cracking behaviors through three typical cases,i.e.coal reservoirs containing a wellbore,a primary fracture,and a natural fracture network,respectively.The progressive cracking processes,from thermal fracture initiation,propagation or cessation,deflection,bifurcation to multi-fracture interactions,can be well captured by the numerical model.It is observed that two hierarchical levels of thermal fractures are formed,in which the number of shorter thermal fractures consistently exceeds that of the longer ones.The effects of coal properties related to thermal stress levels and thermal diffusivity on the fracture morphology are quantified by the fracture fractal dimension and the statistical fracture number.The induced fracture morphology is most sensitive to changes in the elastic modulus and thermal expansion coefficient,both of which dominate the complexity of the fracture networks.Coal reservoir candidates with preferred thermal-mechanical properties are also recommended for improving the stimulation effect.Further findings are that there exists a critical injection temperature and a critical in-situ stress difference,above which no thermal fractures would be formed.Preexisting natural fractures with higher density and preferred orientations are also essential for the formation of complex fracture networks.The obtained results can provide some theoretical support for cryogenic fracturing design in coal reservoirs.

Pore-pressure and stress-coupled creep behavior in deep coal:Insights from real-time NMR analysis

Understanding the variations in microscopic pore-fracture structures(MPFS) during coal creep under pore pressure and stress coupling is crucial for coal mining and effective gas treatment. In this manuscript, a triaxial creep test on deep coal at various pore pressures using a test system that combines in-situ mechanical loading with real-time nuclear magnetic resonance(NMR) detection was conducted.Full-scale quantitative characterization, online real-time detection, and visualization of MPFS during coal creep influenced by pore pressure and stress coupling were performed using NMR and NMR imaging(NMRI) techniques. The results revealed that seepage pores and microfractures(SPM) undergo the most significant changes during coal creep, with creep failure gradually expanding from dense primary pore fractures. Pore pressure presence promotes MPFS development primarily by inhibiting SPM compression and encouraging adsorption pores(AP) to evolve into SPM. Coal enters the accelerated creep stage earlier at lower stress levels, resulting in more pronounced creep deformation. The connection between the micro and macro values was established, demonstrating that increased porosity at different pore pressures leads to a negative exponential decay of the viscosity coefficient. The Newton dashpot in the ideal viscoplastic body and the Burgers model was improved using NMR experimental results, and a creep model that considers pore pressure and stress coupling using variable-order fractional operators was developed. The model’s reasonableness was confirmed using creep experimental data. The damagestate adjustment factors ω and β were identified through a parameter sensitivity analysis to characterize the effect of pore pressure and stress coupling on the creep damage characteristics(size and degree of difficulty) of coal.

Incorporating empirical knowledge into data-driven variable selection for quantitative analysis of coal ash content by laser-induced breakdown spectroscopy

Laser-induced breakdown spectroscopy(LIBS)has become a widely used atomic spectroscopic technique for rapid coal analysis.However,the vast amount of spectral information in LIBS contains signal uncertainty,which can affect its quantification performance.In this work,we propose a hybrid variable selection method to improve the performance of LIBS quantification.Important variables are first identified using Pearson's correlation coefficient,mutual information,least absolute shrinkage and selection operator(LASSO)and random forest,and then filtered and combined with empirical variables related to fingerprint elements of coal ash content.Subsequently,these variables are fed into a partial least squares regression(PLSR).Additionally,in some models,certain variables unrelated to ash content are removed manually to study the impact of variable deselection on model performance.The proposed hybrid strategy was tested on three LIBS datasets for quantitative analysis of coal ash content and compared with the corresponding data-driven baseline method.It is significantly better than the variable selection only method based on empirical knowledge and in most cases outperforms the baseline method.The results showed that on all three datasets the hybrid strategy for variable selection combining empirical knowledge and data-driven algorithms achieved the lowest root mean square error of prediction(RMSEP)values of 1.605,3.478 and 1.647,respectively,which were significantly lower than those obtained from multiple linear regression using only 12 empirical variables,which are 1.959,3.718 and 2.181,respectively.The LASSO-PLSR model with empirical support and 20 selected variables exhibited a significantly improved performance after variable deselection,with RMSEP values dropping from 1.635,3.962 and 1.647 to 1.483,3.086 and 1.567,respectively.Such results demonstrate that using empirical knowledge as a support for datadriven variable selection can be a viable approach to improve the accuracy and reliability of LIBS quantification.

Utilization of Coal Ash as a Barrier Material for Radioactive Waste Disposal

About 10% of total electricity (386 MkW) was generated by nuclear power plants in the world (2014) and about 58,400 tons of uranium has been mined in uranium mines annually. A plenty of radioactive waste material is produced from uranium mines and nuclear power plants. The wastes must be disposed or stored safely for a long term. Because if they leak and/or move from disposal or storage sites due to air/groundwater flow, then a serious environmental pollution can occur. Hence, multi-layer system has been proposed and employed in order to seal off these radioactive waste materials from biosphere. Basically, bentonite is now used for establishing one of absorbing and sealing layers in this system. However, the amount of high quality bentonite is very limited and in some cases it is hard to be obtained. On the other hand, a great deal of refuse from coal burning plants is produced every year and the amount of it is expected to be higher each year especially in developing countries. More than half of coal ash is utilized and the remaining is disposed at the disposal sites. However, the life of the disposal site is limited and it is difficult to find a new disposal site. It is requested that the percentage of the utilization of the coal ash be increased in every field. From the above two points of view, a fly ash-based barrier system is considered in this research and this paper discusses the applicability of fly ash as a content of barrier material. Based on the results of a series of laboratory tests, it can be concluded that fly ash has a potential for use in the buffer material as the bentonite is substituted.

Coalbed Methane Potential in the Basin Guardo-Barruelo (North Spain)

Coal during its carbonization process produces a gas, which, mainly formed by methane, can be used. The use of CBM (Coal bed methane) as an energetic resource is not much known in Spain. This work is the first step to enhance the development of this resource in Castilla y León Guardo-Barruelo basin. A review of the state of the art is introduced, taking into account all the factors that can influence in the development of a CBM project. Then CBM resources have been quantified for Guardo-Barruelo basin accurately for every coal bed. After that, technical feasibility has been used to evaluate total amount of gas that can be recovered.

Subsoil Natural Physico-chemical Reactor: The Property of Deep Abiogenic Methane-Containing High-Thermobaric Fluid to Form Coal Seams

For the first time,the property of deep abiogenic methane-containing high-thermobaric fluid to decompose organic residues in the Earth’s crust and form coal seams was established.

Risk Factor Assessment of Coal Mine Drainage Water on Surrounding Agricultural Soil: A Case Study at Barapukuria in Bangladesh

This study is performed to know the contamination level of heavy metals on the surrounding agricultural soils at the site of Barapukuria Coal Mine Company Limited (BCMCL). Total concentrations of eight heavy metals (Cu, As, Cd, Zn, Pb, Cr, Ni and Mn) were measured in that soil. To calculate the contamination level, the enrichment factor (EF), geoaccumulation index (Igeo) and Hakanson potential ecological risk index were done. Igeo values indicated that the study areas at all stations were suffering from moderate contamination with As. The results of enrichment factor revealed that soils in all stations were in extremely high enrichment condition by As metal. Under Hakanson potential ecological risk index, the contamination coefficient () and potential ecological risk index () were calculated. The degree of contamination at BCMCL area reflects moderate contamination. By considering the ecological risk index of a particular heavy metal, the order is as follows: Cd > As > Cu > Pb > Ni > Cr > Zn and Cd has the highest risk index and poses the greatest damage to the BCMCL area’s soil. EF, Igeo values and potential ecological risk index indicate that there is considerable As and Cd pollution, mainly caused by coal mine drainage water.