The findings were presented from laboratory investigations on the hydrate formation and dissociation processes employed to recover methane from coal mine gas.The separation process of coal mine methane(CMM) was carrie...The findings were presented from laboratory investigations on the hydrate formation and dissociation processes employed to recover methane from coal mine gas.The separation process of coal mine methane(CMM) was carried out at 273.15K under 4.00 MPa.The key process variables of gas formation rate,gas volume stored in hydrate and separation concentration were closely investigated in twelve THF-SDS-sponge-gas systems to verify the sponge effect in these hydrate-based separation processes.The gas volume stored in hydrate is calculated based on the measured gas pressure.The CH4 mole fraction in hydrate phase is measured by gas chromatography to confirm the separation efficiency.Through close examination of the overall results,it was clearly verified that sponges with volumes of 40,60 and 80 cm 3 significantly increase gas hydrate formation rate and the gas volume stored in hydrate,and have little effect on the CH4 mole fraction in hydrate phase.The present study provides references for the application of the kinetic effect of porous sponge media in hydrate-based technology.This will contribute to CMM utilization and to benefit for local and global environment.展开更多
Conducting complete energy audit (both process and utility) of a sponge iron unit is challenging as there is no laid down procedure to audit the process side. Further, the average heat to power ratio (kWth/kWe) of spo...Conducting complete energy audit (both process and utility) of a sponge iron unit is challenging as there is no laid down procedure to audit the process side. Further, the average heat to power ratio (kWth/kWe) of sponge iron plants ranges from (25:1) to (31:1). This shows that the manufacturing process mostly uses thermal energy and application of electrical energy is insignificant. The main & only source of thermal energy is coal and the entire coal is fed to the rotary kiln. Therefore we find that “Kiln” is the “Black-Box” of this industry and the success of energy efficiency is hidden in the kiln process chemistry. This article tries to establish detailed energy audit methodology of sponge iron manufacturing process or kiln operation with a view to finding out major energy saving potential of the unit. In the research work we find that it is the incomplete reaction of coal that causes the major energy inefficiency in the process. Substantial amount of un-reacted carbon comes out with the char (by-product) which has virtually zero commercial value. The article also puts a question mark on the justification of using high-grade imported coal in such energy inefficient industries.展开更多
基金Supported by the National Natural Science Foundation of China （50874040 50904026） the Scientific Research Fund of Heilongjiang Provincial Education Department （11551420）
文摘The findings were presented from laboratory investigations on the hydrate formation and dissociation processes employed to recover methane from coal mine gas.The separation process of coal mine methane(CMM) was carried out at 273.15K under 4.00 MPa.The key process variables of gas formation rate,gas volume stored in hydrate and separation concentration were closely investigated in twelve THF-SDS-sponge-gas systems to verify the sponge effect in these hydrate-based separation processes.The gas volume stored in hydrate is calculated based on the measured gas pressure.The CH4 mole fraction in hydrate phase is measured by gas chromatography to confirm the separation efficiency.Through close examination of the overall results,it was clearly verified that sponges with volumes of 40,60 and 80 cm 3 significantly increase gas hydrate formation rate and the gas volume stored in hydrate,and have little effect on the CH4 mole fraction in hydrate phase.The present study provides references for the application of the kinetic effect of porous sponge media in hydrate-based technology.This will contribute to CMM utilization and to benefit for local and global environment.
文摘Conducting complete energy audit (both process and utility) of a sponge iron unit is challenging as there is no laid down procedure to audit the process side. Further, the average heat to power ratio (kWth/kWe) of sponge iron plants ranges from (25:1) to (31:1). This shows that the manufacturing process mostly uses thermal energy and application of electrical energy is insignificant. The main & only source of thermal energy is coal and the entire coal is fed to the rotary kiln. Therefore we find that “Kiln” is the “Black-Box” of this industry and the success of energy efficiency is hidden in the kiln process chemistry. This article tries to establish detailed energy audit methodology of sponge iron manufacturing process or kiln operation with a view to finding out major energy saving potential of the unit. In the research work we find that it is the incomplete reaction of coal that causes the major energy inefficiency in the process. Substantial amount of un-reacted carbon comes out with the char (by-product) which has virtually zero commercial value. The article also puts a question mark on the justification of using high-grade imported coal in such energy inefficient industries.
