Whole petroleum system in Jurassic coal measures of Taibei Sag in Tuha Basin,NW China

Based on the latest results of near-source exploration in the Middle and Lower Jurassic of the Tuha Basin,a new understanding of the source rocks,reservoir conditions,and source-reservoir-cap rock combinations of the Jurassic Shuixigou Group in the Taibei Sag is established using the concept of the whole petroleum system,and the coal-measure whole petroleum system is analyzed thoroughly.The results are obtained in three aspects.First,the coal-measure source rocks of the Badaowan Formation and Xishanyao Formation and the argillaceous source rocks of the Sangonghe Formation in the Shuixigou Group exhibit the characteristics of long-term hydrocarbon generation,multiple hydrocarbon generation peaks,and simultaneous oil and gas generation,providing sufficient oil and gas sources for the whole petroleum system in the Jurassic coal-bearing basin.Second,multi-phase shallow braided river delta–shallow lacustrine deposits contribute multiple types of reservoirs,e.g.sandstone,tight sandstone,shale and coal rock,in slope and depression areas,providing effective storage space for the petroleum reservoir formation in coal-measure strata.Third,three phases of hydrocarbon charging and structural evolution,as well as effective configuration of multiple types of reservoirs,result in the sequential accumulation of conventional-unconventional hydrocarbons.From high structural positions to depression,there are conventional structural and structural-lithological reservoirs far from the source,low-saturation structural-lithological reservoirs near the source,and tight sandstone gas,coal rock gas and shale oil accumulations within the source.Typically,the tight sandstone gas and coal rock gas are the key options for further exploration,and the shale oil and gas in the depression area is worth of more attention.The new understanding of the whole petroleum system in the coal measures could further enrich and improve the geological theory of the whole petroleum system,and provide new ideas for the overall exploration of oil and gas resources in the Tuha Basin.

Microstructural and thermal properties of coal measure sandstone subjected to high temperatures

To study the microscopic structure,thermal and mechanical properties of sandstones under the influence of temperature,coal measure sandstones from Southwest China are adopted as the research object to carry out high-temperature tests at 25℃-1000℃.The microscopic images of sandstone after thermal treatment are obtained by means of polarizing microscopy and scanning electron microscopy(SEM).Based on thermogravimetric(TG)analysis and differential scanning calorimetric(DSC)analysis,the model function of coal measure sandstone is explored through thermal analysis kinetics(TAK)theory,and the kinetic parameters of thermal decomposition and the thermal decomposition reaction rate of rock are studied.Through the uniaxial compression experiments,the stress‒strain curves and strength characteristics of sandstone under the influence of temperature are obtained.The results show that the temperature has a significant effect on the microstructure,mineral composition and mechanical properties of sandstone.In particular,when the temperature exceeds 400℃,the thermal fracture phenomenon of rock is obvious,the activity of activated molecules is significantly enhanced,and the kinetic phenomenon of the thermal decomposition reaction of rock appears rapidly.The mechanical properties of rock are weakened under the influence of rock thermal fracture and mineral thermal decomposition.These research results can provide a reference for the analysis of surrounding rock stability and the control of disasters caused by thermal damage in areas such as underground coal gasification(UCG)channels and rock masses subjected to mine fires.

Characteristics of coal resources in China and statistical analysis and preventive measures for coal mine accidents

In the process of green and smart mine construction under the context of carbon neutrality,China's coal safety situation has been continuously improved in recent years.In order to recognize the development of coal production in China and prepare for future monitoring and prevention of safety incidents,this study mainly elaborated on the basic situation of coal resources and national mining accidents over the past five years(2017-2021),from four dimensions(accident level,type,region,and time),and then proposed the preventive measures based on accident statistical laws.The results show that the storage of coal resources has obvious geographic characteristics,mainly concentrated in the Midwest,with coal resources in Shanxi and Shaanxi accounting for about 49.4%.The proportion of coal consumption has dropped from 70.2%to 56%between 2011 and 2021,but still accounts for more than half of the all.Meanwhile,the accident-prone areas are positively correlated with the amount of coal production.Among different levels of coal mine accidents,general accidents had the highest number of accidents and deaths,with 692 accidents and 783 deaths,accounting for 87.6%and 54.64%respectively.The frequency of roof,gas,and transportation accidents is relatively high,and the number of single fatalities caused by gas accidents is the largest,about 4.18.In terms of geographical distribution of accidents,the safety situation in Shanxi Province is the most severe.From the time distribution of coal mine accidents,the accidents mainly occurred in July and August,and rarely occurred in February and December.Finally,the"4+4"safety management model is proposed,combining the statistical results with coal production in China.Based on the existing health and safety management systems,the manage-ments are divided into four sub-categories,and more specific measures are suggested.

Upper Paleozoic coal measures and unconventional natural gas systems of the Ordos Basin,China

Upper Paleozoic coal measures in the Ordos Basin consist of dark mudstone and coal beds and are important source rocks for gas generation. Gas accumulations include coal-bed methane （CBM）, tight gas and conventional gas in different structural areas. CBM accumulations are mainly distributed in the marginal area of the Ordos Basin, and are estimated at 3.5 × 1012 m3. Tight gas accumulations exist in the middle part of the Yishan Slope area, previously regarded as the basin-centered gas system and now considered as stratigraphic lithologic gas reservoirs. This paper reviews the characteristics of tight gas accumulations： poor physical properties （porosity 〈 8%, permeability 〈 0.85 × 10 3 μm2）, abnormal pressure and the absence of well-defined gas water contacts. CBM is a self-generation and self- reservoir, while gas derived from coal measures migrates only for a short distance to accumulate in a tight reservoir and is termed near-generation and near-reservoir. Both CBM and tight gas systems require source rocks with a strong gas generation ability that extends together over wide area. However, the producing area of the two systems may be significantly different.

Study on REEs as tracers for late permian coal measures in Bijie City,Guizhou Province,China

Analyses of Rare Earth Elements （REEs） in 13 coal samples collected from Late Permian coal measures of Bijie City in western Guizhou Province were conducted using Inductively Coupled Plasma-Mass-Spectrometry （ICP-MS）. The results indicated that REEs patterns were not controlled by materials from the sea, whereas the contribution of land plants was about 1%. The major sources of REEs were from terrigenous material as indicated by negative Eu anomaly. There were similar distribution curves of REEs between Bijie＇s coal and Emeishan basalt. M12 coal seam, which had the highest ∑REE, appeared near the boundary between Longtan Formation and Changxing Formation, which was closely correlated to the eruption of Emeishan basalt. The Emeishan basalt contributed to REEs enrichment of M12. So the sources of REEs were controlled by terrigenous material, and the Emeishan basalt was the predominant source of terrigenous material, which dominated the enrichment and pattern of REEs in Late Permian coal measure from Bijie.

Distribution Characteristics and Accumulation Model for the Coal-formed Gas Generated from Permo-Carboniferous Coal Measures in Bohai Bay Basin, China: A Review

Coal-formed gas generated from the Permo-Carboniferous coal measures has become one of the most important targets for deep hydrocarbon exploration in the Bohai Bay Basin,offshore eastern China.However,the proven gas reserves from this source rock remain low to date,and the distribution characteristics and accumulation model for the coal-formed gas are not clear.Here we review the coal-formed gas deposits formed from the Permo-Carboniferous coal measures in the Bohai Bay Basin.The accumulations are scattered,and dominated by middle-small sized gas fields,of which the proven reserves ranging from 0.002 to 149.4×108 m3 with an average of 44.30×108 m3 and a mid-point of 8.16×108 m3.The commercially valuable gas fields are mainly found in the central and southern parts of the basin.Vertically,the coal-formed gas is accumulated at multiple stratigraphic levels from Paleogene to Archaeozoic,among which the Paleogene and PermoCarboniferous are the main reservoir strata.According to the transporting pathway,filling mechanism and the relationship between source rocks and reservoir,the coal-formed gas accumulation model can be defined into three types:"Upward migrated,fault transported gas"accumulation model,"Laterally migrated,sandbody transported gas"accumulation model,and"Downward migrated,sub-source,fracture transported gas"accumulation model.Source rock distribution,thermal evolution and hydrocarbon generation capacity are the fundamental controlling factors for the macro distribution and enrichment of the coal-formed gas.The fault activity and the configuration of fault and caprock control the vertical enrichment pattern.

Review of preventive and constructive measures for coal mine explosions:An Indian perspective

Firedamp and coal dust explosion constitute a lion’s share in mine accidents in a global mining scenario.This paper reports a list of mine explosion disasters since last two decades,a critical review of the different prevention and constructive measures,and its recent development to avoid firedamp and coal dust explosion.Preventive legislation in core coal-producing countries,viz.China,USA,Australia,South Africa,and India related to firedamp and coal dust explosion are critically analysed.Accidents occurred due to explosion after Nationalisation of Coal Mines(1973)in India are listed.Prevention and constructive measures adopted in India are critically analysed with respect to the global mining scenario.Measures like methane credit concept,classification of mines/seams with respect to explosion risk zone,deflagration index;installation of automatic fire warning devices,canopy air curtain technology,explosion-prevention measures,such as fire-retardant materials,inhibitors,extinguishing agent,dust suppressor,and active explosion barrier are discussed in detail to avoid explosion and thereby adhering to zero accident policy due to coal mine explosion.

Formation and distribution of coal measure source rocks in the Eocene Pinghu Formation in the Pinghu Slope of the Xihu Depression,East China Sea Shelf Basin

The Xihu Depression in the East China Sea Shelf Basin is a large petroliferous sedimentary depression,in which oil and gas reservoirs were mainly discovered in the Pinghu Slope and the central inversion zone.The oil-gas source correlation in the Xihu Depression was analyzed by hydrocarbon generating thermal simulation data via gold-tube pyrolysis experiments.The results indicated that the oil and gas in the Xihu Depression were mainly derived from coal measure source rocks of the Eocene Pinghu Formation.Therefore,the identification of coal seams is extremely crucial for evaluating coal measure source rocks in the Pinghu Formation in the Xihu Depression.Geochemical and petrological characterization pointed to input of terrigenous organic matter and redox conditions of the depositional environment as factors that govern the ability of the coal measure source rocks in hydrocarbon generation in the Xihu Depression.In this regard,the sedimentary organic facies in the Pinghu Formation were classified into four predominantly terrigenous and one mixed-source subfacies,which all varied in carbon and hydrogen content.The coal measure source rocks in the carbon-and hydrogen-rich tidal flat-lagoon exhibited the highest hydrocarbon generation potential,whereas the mudstone in the neritic facies was the poorest in its hydrocarbon yield.These results suggested that the coal measure source rocks in the Pinghu Formation likely developed in the Hangzhou Slope and the Tiantai Slope,both representing promising sources for oil and gas exploration.

Analysis of the mechanical property of mudstone/shale in paralic coal measures and its influence factors

The mechanical property of mudstone/shale in coal measures is a key factor of engineering mechanics that influences the development of shale gas. A rock mechanics test was performed in order to analyze the complete stress-strain mechanic characteristics and influence factors of mudstone/shale in paralic coal measures, from the Carboniferous-Permian periods in a coal field of Northern China. The relationship between the mechanical properties of mudstone/shale in coal measures, and its chemical component, water content are established, and their models are constructed. Research results show that mud- stone/shale has low mechanical strength, low elastic modulus and a high Poisson＇s ratio. The complete stress-strain curve has apparent elastoplastic deformation characteristics, and after reaching peak strength, it exhibits obvious strain softening characteristics. The uniaxial compressive strength of mudstone/shale and its elastic modulus increases exponentially with the increase of SiO2 content, and as the ignition loss increases, the uniaxial compressive strength and elastic modulus of mudstone/shale will decrease according to the law of power function. The compressive strength of mudstone/shale and its elastic modulus will decrease with the increase of water content in mudstone/shale.

Classification of Mineral Resources Associated and Accompanied with Coal Measures

The paper discusses the concept of mineral resources associated with coal measures. A rational and scientific classification of such mineral resources becomes more necessary with the development of science and technology. A classification scheme is proposed based on compositions and physical properties and the utilization of these associated minerals.

Resources of Kaolinite Rocks in China Coal Measures

The proved reserve of kaolinite rocks in China coal measures is about 1.673 billion tons. The types of kaolinite rocks contain tonstein, flintclay and soft kaolin. Their origin modes include alteration of volcanic ash, terrigenous clay deposit and weathering of coal and adjacent rocks. The organic matter and organic acid play an important role in the formation of kaolinite rocks of coal measures. The difference in properties between kaolinite rock and traditional kaolin requires different processing technologies.

Study on the Safety and Prevention Technology of Coal Mining under the River in Xingyuan Coal Mine

Coal mining-induced surface subsidence poses significant ecological and infrastructural challenges, necessitating a comprehensive study to ensure safe mining practices, particularly in underwater conditions. This project aims to address the extensive impact of coal mining on the environment, infrastructure, and overall safety, focusing on the Shigong River area above the working face. The study employs qualitative and quantitative analyses, along with on-site engineering measurements, to gather data on crucial parameters such as coal seam characteristics, roof rock lithology, thickness, water resistance, and structural damage degree. The research encompasses a multidisciplinary approach, involving mining, geology, hydrogeology, geophysical exploration, rock mechanics, mine surveying, and computational mathematics. The importance of effective safety measures and prevention techniques is emphasized, laying the foundation for research focused on the Xingyun coal mine. The brief concludes by highlighting the potential economic and social benefits of this project and its contribution to valuable experience for future subsea coal mining.

Research on Failure Analysis Method and Preventive Measures of Coal Mine Machinery Bearing

For coal mine production, the role of mechanical bearings is to provide basic support for the transportation of mining coal resources. For coal production, because of its large production capacity and intensive production, mechanical bearings will wear under the influence of high strength and high load in coal transportation, which will lead to bearing failure in the long run, thus affecting the transportation efficiency of coal resources. In order to improve this situation, it is necessary to analyze the wear failure of coal mine mechanical bearings, and to formulate corresponding preventive measures accordingly. Based on this, this paper focuses on the analysis method of mechanical bearing wear failure, and puts forward corresponding preventive measures, in order to effectively improve the current situation of coal mine production.

Optimization Study of Outburst Prevention Measures for Tuzhu Coal Mine Based on Fixed Weight Clustering Analysis

Affected by many involved factors, different dimensions, data with large difference, incomplete information and so on, the most optimal selection of regional outburst prevention measures for outburst mine has become a complicated system project. The traditional way of outburst prevention measure selection belongs to qualitative method, which may cause high-cost of gas control, huge quantities of drilling work, long construction time and even secondary disaster. To solve the above-mentioned problems, in light of occurrence status of coal seam gas in No. 21 mining area of Jinzhushan Tuzhu Mine, through grey fixed weight clustering theory and a combination method of qualitative and quantitative analysis, the judging model with multi-objective classification for optimization of outburst prevention measures was established. The three weight coefficients of outburst prevention technology scheme are sorted, in order to determine the advantages and disadvantages of each outburst prevention technology scheme under the comprehensive evaluation of multi-target. Finally, the problem of quantitative selection for regional outburst prevention technology scheme is solved under the situation of multi-factor mode and incomplete information, which provides reasonable and effective technical measures for prevention of coal and gas outburst disaster.

China's Strategic Measures to Develop Coal Industry During the Period of the Ninth Five-Year Plan

A reporter for China’s Foreign Tradehas learned from the Ministry of theCoal Industry that China will takethe following steps to develop its coal industryduring the ninth five-Year plan period. 1. To regulate the policy for buildupthe coal industry and to make a good job ofthe comprehensive development of buildinga number of key coal production bases.

Monitoring in Building Road Tunnel Across Coal Measures

In some cases coal measures,goaf,big caves,and huge faults,as well as high initial stress cannot be avoided in road tunnel excavation.These geological features may make it more difficul practical tunnel construction. So it is necessary to take strong precautious measures against gas outburst,water bursting and roof fall in a tunnel across coal measures with risk of gas outburst.The techniques,such as advance drilling exploration,multiple-cycle shallow depth hole controlled blasting,reinforced supporting,which include concrete grouting and twice supporting,and monitoring measures are often applied in the construction of tunnels and satisfied results are achieved. Results in this paper can help others to get experiences in road tunnel construction with similar geological features.

Discussion on determination of gas content of coal and uncertainties of measurement

Gas content of coal is mostly determined using a direct method, particularly in coal mining where mine safety is of paramount importance. Direct method consists of measuring directly the volume of gas desorbed from coal in several steps, from solid then crushed coal. In mixed gas conditions the composition of the desorbed gas is also measured to account for contribution of various coal seam gas in the mix. The determination of gas content using the direct method is associated with errors of measurement of volume of gas but also the errors associated with measurement of composition of the desorbed gas. These errors lead to uncertainties in reporting the gas content and composition of in-situ seam gas. This paper discusses the current direct method practised in Australia and potential errors and uncertainty associated with this method. Generic methods of estimate of uncertainties are also developed and are to be included in reporting gas content of coal. A method of direct measurement of remaining gas in coal following the completion of standard gas content testing is also presented. The new method would allow the determination of volume of almost all gas in coal and therefore the value of total gas content. This method is being considered to be integrated into a new standard for gas content testing.

Organic Geochemical and Petrographic Characteristics of the Coal Measure Source Rocks of Pinghu Formation in the Xihu Sag of the East China Sea Shelf Basin: Implications for Coal Measure Gas Potential

Coal measure source rocks, located in the Xihu Sag of the East China Sea Shelf Basin, were analyzed to define the hydrocarbon generation potential, organic geochemistry/petrology characteristics, and coal preservation conditions. The Pinghu source rocks in the Xihu Sag are mainly gas-prone accompany with condensate oil generation. The coals and shales of the Pinghu Formation are classified from "fair" to "excellent" source rocks with total organic carbon(TOC) contents ranging from 25.2% to 77.2% and 1.29% to 20.9%, respectively. The coals are richer in TOC and S1+S2 than the shales, indicating that the coals have more generation potential per unit mass. Moreover, the kerogen type of the organic matter consists of types Ⅱ-Ⅲ and Ⅲ, which the maturity Ro ranges from 0.59% to 0.83%. Petrographically, the coals and shales are dominated by vitrinite macerals(69.1%–96.8%) with minor proportions of liptinite(2.5%–17.55%) and inertinite(0.2%–6.2%). The correlation between maceral composition and S1+S2 indicates that the main contributor to the generation potential is vitrinite. Therefore, the coals and shales of the Pinghu Formation has good hydrocarbon generation potential, which provided a good foundation for coal measure gas accumulation. Furthermore, coal facies models indicates that the Pinghu coal was deposited in limno-telmatic environment under high water levels, with low tree density(mainly herbaceous) and with low-moderate nutrient supply. Fluctuating water levels and intermittent flooding during the deposition of peat resulted in the inter-layering of coal, shale and sandstone, which potentially providing favorable preservation conditions for coal measure gas.

Geochemical characteristics of Guizhou Permian coal measure strata and analysis of the control factors

Based on element geochemical studies of the main Permian exploitable coal measure strata in Western Guizhou, the element geochemical distribution characteristics of the main exploitable coal measures were revealed in the regions of Dafang, Qianxi, Weining, Hezhang, Zhijin, etc., of Guizhou Province, and the results show that their element contents are mainly affected by terrestrial material supply. Coal measures formed in the delta plain environment where sufficient terrestrial materials are supplied contain relatively abundant trace elements and rare-earth elements, whereas those formed in the tidal-fiat environment influenced greatly by seawater have relatively low contents of trace elements and rare-earth elements, mainly con- trolled by the geological fact that basalts the parent rocks from source regions contain high trace elements and rare-earth elements. In addition, coal measures affected by later hydrothermal activities and fault tectonics contain a large amount of harmful elements. According to the rules of distribution of elements in coal measures, a new idea was put forward to classify coal-forming environments by using the geochemical composition characteristics, which is of great significance in dissolving the problem of whether coal measures were fbrmed either in delta environments or in tidal-flat environments in Western Gui- zhou. At the same time, the rules of distribution of elements in the main exploitable coal measures in Western Guizhou were fully understood, which is of direct significance in utilizing coal resources on the basis of classification of coals, as well as in developing the coal chemical industry.

Measurement of overburden failure zones in close-multiple coal seams mining

In the Kaiping Coal field,mining of five coal seams,located within 80 m in the Kailuan Group,#5,#7,#8,#9 and#12 coal seam,is difficult due to small interburden thickness,concentrated stress distributions,high coal seam metamorphism,and complex geological conditions.By using the ZTR12 geological penetration radar(GPR)survey combined with borehole observations,the overburden caving due to mining of the five coals seams was measured.The development characteristics of full-cover rock fractures after mining were obtained from the GPR scan,which provides a measurement basis for the control of rock strata in close multiple coal seam mining.For the first time,it was found that the overburden caving pattern shows a periodic triangular caved characteristic.Furthermore,it is proposed that an upright triangular collapsed pile masonry and an inverted triangular with larger fragments piled up alternately appear in the lower gob.The research results show that the roof structure formed in the gob area can support the key overlying strata,which is beneficial to ensure the integrity and stability of the upper coal seams in multiple-seam mining of close coal seams.