A Gasification Technology to Combine Oil Sludge with Coal-Water Slurry:CFD Analysis and Performance Determination

The development of more environment-friendly ways to dispose of oil sludge is currently regarded as a hot topic.In this context,gasification technologies are generally seen as a promising way to combine oil sludge with coal–water slurry(CWS)and generate resourceful fuel.In this study,a novel five-nozzle gasifier reactor was analyzed by means of a CFD(Computational fluid dynamic)method.Among several influential factors,special attention was paid to the height-to-diameter ratio of the gasifier and the mixing ratio of oil sludge,which are known to have a significant impact on the flow field,temperature distribution and gasifier performances.According to the numerical results,the optimal height-to-diameter ratio and oil mixing ratio are about 2.4:1 and 20%,respectively.Furthermore,the carbon conversion rate can become as high as 98.55%with the hydrolysis rate reaching a value of 53.88%.The consumption of raw coal and oxygen is generally reduced,while the effective gas production is increased to 50.93 mol/%.

Synergistic effects of dodecane-castor oil acid mixture on the flotation responses of low-rank coal:A combined simulation and experimental study

The utilization of an appropriate collector or surfactant is crucial for the beneficiation of low-rank coal.However,in previous studies,the selection of surfactants was primarily based on flotation procedures,which hinders the understanding of the interaction mechanism between surfactant groups and oxygen-containing functional groups at the surface of low-rank coal.In this study,we investigate the flotation of low-rank coal in the presence of a composite collector by using a combined theoretical and experimental approach.The maximum flotation mass recovery achieved was 82.89%using a 3:1 mixture of dodecane and castor oil acid.Fourier-transform infrared and X-ray photoelectron spectroscopic analyses showed that castor oil acid was effectively adsorbed onto the surface of low-rank coal,enhancing the hydrophobicity of the coal.In addition,the diffusion coefficient of water molecules in the water-composite collector-coal system was greater than that in the dodecane system.Moreover,due to the presence of castor oil acid in the flotation process,the adsorption distance of dodecane and low-rank coal became shorter.Molecular dynamics simulations revealed that the diffusion and interaction of surfactant molecules at the interface of low-rank coal particles and water was enhanced because the adsorption of the dodecane-castor oil acid mixture is primarily controlled by hydrogen bonds and electrostatic attraction.Based on these results,a better surfactant for flotation of low-rank coal is also proposed.

Whole petroleum system in Jurassic coal measures of Taibei Sag in Tuha Basin,NW China

Based on the latest results of near-source exploration in the Middle and Lower Jurassic of the Tuha Basin,a new understanding of the source rocks,reservoir conditions,and source-reservoir-cap rock combinations of the Jurassic Shuixigou Group in the Taibei Sag is established using the concept of the whole petroleum system,and the coal-measure whole petroleum system is analyzed thoroughly.The results are obtained in three aspects.First,the coal-measure source rocks of the Badaowan Formation and Xishanyao Formation and the argillaceous source rocks of the Sangonghe Formation in the Shuixigou Group exhibit the characteristics of long-term hydrocarbon generation,multiple hydrocarbon generation peaks,and simultaneous oil and gas generation,providing sufficient oil and gas sources for the whole petroleum system in the Jurassic coal-bearing basin.Second,multi-phase shallow braided river delta–shallow lacustrine deposits contribute multiple types of reservoirs,e.g.sandstone,tight sandstone,shale and coal rock,in slope and depression areas,providing effective storage space for the petroleum reservoir formation in coal-measure strata.Third,three phases of hydrocarbon charging and structural evolution,as well as effective configuration of multiple types of reservoirs,result in the sequential accumulation of conventional-unconventional hydrocarbons.From high structural positions to depression,there are conventional structural and structural-lithological reservoirs far from the source,low-saturation structural-lithological reservoirs near the source,and tight sandstone gas,coal rock gas and shale oil accumulations within the source.Typically,the tight sandstone gas and coal rock gas are the key options for further exploration,and the shale oil and gas in the depression area is worth of more attention.The new understanding of the whole petroleum system in the coal measures could further enrich and improve the geological theory of the whole petroleum system,and provide new ideas for the overall exploration of oil and gas resources in the Tuha Basin.

The genetic environmental transformation mechanism of coal and oil shale deposits in eastern China’s continental fault basins and the developmental characteristics of the area’s symbiotic assemblages——taking Huangxian Basin as an example

Coal and oil shale are two common sedimentary energy sources which are often symbiotically developed in M esozoic- Cenozoic continental fault basins. However, the mechanisms and characteristics of the symbiotic development are not yet clearly known. In this research study, the typical continental fault basins of eastern China were chosen as examples for the purpose of conducting an examination of the coal and oil shale symbiotic assemblage types, genetic environmental differences, and transformation mechanisms, as well as the development and occurrence characteristics o f different assemblage types. Through a large number of investigations, systematic experimental testing, and sequence stratigraphy studies, the following conclusions were obtained:(1) There were five types of coal and oil shale symbiotic assemblages observed in the continental fault basins,(2) The development of coal and oil shale deposits requires a warm and humid climate, stable structure, abundant organic matter supply, a certain water depth, and a lower terrestrial source debris supply. The observed differences were that the water depth conditions were diversified in the study area, as well as the sources, types, and content of the organic matter.(3) The rapid transformations of the coal and oil shale genetic environments were mainly controlled by the tectonic settings and climatic conditions, which were determined to control the changes in the water depths, salinity,redox conditions, and lake productivity of the genetic environments. Also, in the symbiotic assemblages, genetic environment changes had induced the development of oil shale deposits, which gradually evolved into coal genetic environments.(4) In the isochronous sequence stratigraphic framework of the coal and oil shale symbiotic assemblages, the lake expansion system tracts (EST) were determined to be the most beneficial to the growth o f all the types of assemblages and were characterized by more assemblage development phases and smaller bed thicknesses. From the early to the late stages of the EST, and from the lakesides to lake centers, the thicknesses of the coal seams in the symbiotic assemblages showed trends of thinning, while the thicknesses of the oil shale deposits exhibited increasing trends. The early stages of high stand system tracts were found to be beneficial to the development of the symbiotic assemblages of coal seams overlying the oil shale. This tract type generally presented large bed thicknesses and distribution ranges. The low stand system tract and the late high stand system tract were determined to be unconducive to the development of the symbiotic assemblages.

Geochemical Evidence for Coal and Carbonaceous Mudstone as the Possible Major Oil Source Rock in the Jurassic Turpan Basin, Northwest China

Petroleum geologists have debated whether the hydrocarbons from Jurassic coal measures are derived from the coals, carbonaceous mudstones or coal-measure mudstones in the Turpan Basin. Based on the geochemistry analysis of the 20 crude oils and 40 source rocks from the Turpan Basin, some data have been obtained as follows： carbon preference index and methylphenanthrene index of the Jurassic oils are 1.16-1.45 and 0.28-0.80, and the ααα C29 sterane 20S/（20S＋20R） and C29 sterane ββ/（ββ＋αα） are 0.44-0.51 and 0.4-0.54 respectively, which show the normal maturity of oils; the vitrinite reflectance of the source rocks from the Xishanyao to Badaowan Formations range from 0.47% to 0.97%, which indicate immature to mature thermal evolutionary stage and sufficient conditions for generating mass mature oil. The effect of hydrocarbon expulsion should be considered when studying the source of coal-derived oil by using Biomarkers. Biomarkers in the Jurassic oils from the basin are similar to those in the coals and carbonaceous mudstones, with a strong predominant content of pristane, relatively high ratio of C15 /C16 sesquiterpenoids （1）, a relatively high content of low carbon number tricyclic terpanes and C 24 tetracyclic terpane, little gammacerane and C 29 Ts detected, an absolute predominant content of C29 sterane and a relatively high content of diasterane. However, the opposite characteristics are shown in mudstones, with an approximately equal content of pristane and phytane, relatively low ratio of C15 /C16 sesquiterpenoids （1）, a relatively high content of high carbon number tricyclic terpanes and a low content of C 24 tetracyclic terpane, peaks of gammacerane and C29 Ts detected obviously and an increasing C27 sterane content. All of these characteristics identify the coals and carbonaceous mudstones as the possible major oil source rocks in this area, and they were formed in the stronger oxidizing environment with shallower water than mudstones.

New prospecting progress using information and big data of coal and oil exploration holes on sandstone-type uranium deposit in North China

1.Objective A series of Mesozoic-Cenozoic continental sedimentary basins exist in North China,coexisting with coal,oil/gas,and salt resources.Many previous drilling projects have been conducted within these basins to explore coal,petroleum,and mineral resources,however,these data have not been integrated due to different industries owners.In order to efficiently explore the large-sized,easily extracted,and environmentally friendly,sandstone-type uranium deposits,previous coal and oil exploration drilling-hole data are systematically collected, processed,and analyzed to improve the sandstone-type uranium prospecting exploitation.At the same time,we also discussed the uranium source,ore-forming process and model for the sandstone-type uranium deposits.

Adsorption of oil from waste water by coal:characteristics and mechanism

The work described here was focused on exploring the potential application of coal to purification of oily waste water.Coal was added to oily waste water as an adsorbent and then removed through a flotation process.This allowed economical and highly efficient separation of oil from the waste water.The absorption time,coal type,coal particle size distribution,pH value and oil concentration were investigated.The results indicate that oil absorption by a coal increases for a period of 1.5 h and then gradually tends toward an equilibrium value.It appears that the absorption capacity of anthracite is more than that of lean coal or lignite,given the same coal particle size distribution.The absorption capacity of a coarse coal fraction is less than that of finer coal,given the same of coal type.The absorption capacity of anthracite decreases slightly as the pH increases from 4 to 9.The adsorption of oil on anthracite follows the Freundlich isothermal adsorption law:given initial oil concentrations of 160.5 or 1023.6 mg/L the absorption capacity was 23.8 or 840.0 mg/g.The absorption mechanism consists of two kinds of absorption,a physical process assisted by a chemical one.

Investigation into co-pyrolysis characteristics of oil shale and coal

Samples of five types of coal and oil shale from the Daqing region have been subjected to co-pyrolysis in different blending ratios with thermo-gravimetry （TG）, given a heating rate of 30 ℃/min to a final tem- perature of 900 ℃. Investigations on pyrolysis of mixing coal and oil shale in different proportions were carried out, indicating that the main scope of weight loss corresponding to hydrocarbon oil and gas release was between 350 and 550 ℃. At higher temperatures, significant weight loss was attributed to coke decomposition. Characteristic pyrolysis parameters of blends from oil shale and the high ranked XZ coal varied with the blending ratio, but oil shale dominated the process. At the same blending propor- tions, highly volatile medium and low ranked coal of low moisture and ash content reacted well during pyrolysis and could easily create synergies with oil shale. Medium and high ranked coal with high mois- ture content played a negative role in co-pyrolysis.

An advanced ash fusion study on the melting behaviour of coal,oil shale and blends under gasification conditions using picture analysis and graphing method

This study investigates the potential of solid fuel blending as an effective approach to manipulate ash melting behaviour to alleviate ashrelated problems during gasification,thus improving design,operability and safety.The ash fusion characteristics of Qinghai bituminous coal together with Fushun,Xinghua and Laoheishan oil shales(and their respective blends)were quantified using a novel picture analysis and graphing method,which incorporates conventional ash fusion study,dilatometry and sintering strength test,in a CO/CO_(2)atmosphere.This imagebased characterisation method was used to monitor and quantify the complete melting behaviour of ash samples from room temperature to 1520℃.The impacts of blending on compositional changes during heating were determined experimentally via Xray diffraction and validated computationally using FactSage.Results showed that the melting point of Qinghai coal ash to be the lowest at 1116℃,but would increase up to 1208℃,1161℃and 1160℃with the addition of 30%50%of Laoheishan,Fushun,and Xinghua oil shales,respectively.The formation of highmelting anorthite and mullite structures inhibits the formation of lowmelting hercynite.However,the sintering point of Qinghai coal ash was seen to decrease from 1005℃to 855℃,834℃,and 819℃in the same blends due to the formation of lowmelting aluminosilicate.Results also showed that blending directly influences the sintering strength during the various stages of melting.The key finding from this study is that it is possible to mitigate against the severe ash slagging and fouling issue arising from high calcium and iron coals by cogasification with a high silicaalumina oil shale.Moreover,blending coals with oil shales can also modify the ash melting behaviour of fuels to create the optimal ash chemistry that meets the design specification of the gasifier,without adversely affecting thermal performance.

Coal Tar Derived Metallocene Catalyst for Polymerization of 1-Decene into Low-viscosity Poly-α-Olefin Lubricating Base Oil

The production of poly-α-olefins(PAOs)has attracted attention due to their excellent viscosity-temperature dependence,wear characteristics,oxidative properties,and high thermal stability.In this study,indene extracted during coal tar refining was used as a raw material to synthesize a bis(indenyl)zirconium dichloride metallocene catalyst.A PAO with low viscosity and a high viscosity index was produced via the oligomerization of 1-decene in the presence of both the prepared metallocene and a methylaluminoxane(MAO)co-catalyst.Notably,the effects of different synthesis reaction parameters,such as Al:Zr ratio,amount of catalyst,and reaction temperature,on the conversion ratio and product selectivity were investigated in detail.The produced PAO was thoroughly characterized using Fourier-transform infrared,^(13)C,and^(1)H nuclear magnetic resonance spectroscopies;gas chromatography;and viscosity measurements.At 70℃,the metallocene catalyst created more stable active sites.In addition,the alkylation effect of MAO was noticeable.Interestingly,the obtained catalysis results demonstrated that a high conversion ratio of~93%was achieved at a low reaction temperature of 70℃,with a catalyst dosage of 0.0848 mmol and Al:Zr ratio of 8.48mmol:0.0848mmol.Moreover,under these optimal conditions,the kinematic viscosity of PAO was 4.25 mm2/s at 100℃,and the viscosity index was 139,indicating good viscosity-temperature properties.

Life Cycle Assessment of Ultra-clean Micronized Coal Oil Water Slurry

Life cycle assessment is applied to assess the ultra-clean micronized coal oil water slurry (UCMCOWS) with SimaPro and the environmental impact of UCMCOWS on its whole life cycle is also analyzed. The result shows that the consumption of energy and products are increasing along with the deepening of UCMCOWS processing, UCMCOWS making and combustion are the two periods which have a bigger impact on eco-system and human health. As a new substitute of fuel, UCMCOWS merits to be utilized more efficiently and reasonably.

Preparation of Ultra-Clean Coal by Selective Oil Agglomeration

This paper deals with the preparatiou of ultra-clean coals by selective oil agglomeration. It has been found that the deashing method used has high deashing rate and high combustible recovery but low oil consumption. So it will be widely used in the future. The ash content of coal 1# and 2# is reduced to less than 1%. It has been summarized that the main factors affecting deashing are coal rank, oil consumption, pulp density as well as particle size.

Compositional and geochemical characteristics of light hydrocarbons for typical marine oils and typical coal-generated oils in China

Different types of crude oils have different light hydrocarbon compositional and geochemical character-istics. Based on the light hydrocarbon data from two kinds of oils,i.e.,coal-generated oils and marine oils in China,light hydrocarbons in marine oils in the Tazhong area are generally relatively enriched in n-heptane,and coal-generated oils from the Turpan Basin are enriched in methylcyclohexane . The K1 values,reported by Mango (1987),range from 0.97 to 1.19 in marine oils,basically consistent with what was reported by Mango on light hy-drocarbons in terms of the majority of the crude oil data. But the K1 values of coal-generated oils are particularly high (1.35-1.66) and far greater than those of marine oils; heptane values in marine oils,ranging from 32.3% to 45.4%,and isoheptane values,ranging from 1.9 to 3.7,are respectively higher than those of coal-generated oils,in-dicating that the oils are in the high-maturity stage. In addition,expulsion temperatures of coal-generated oils from the Turpan Basin are obviously lower than those of marine oils from the Tazhong area.

Coal flotation using wash oil as a new type of collector

The use of wash oil as a coal collector is proposed to overcome the disadvantages of regular collectors in coal slime flotation. These disadvantages include high price, limited sources and high consumption. The effect of additives on flotation was studied and an innovative ＂one rough separation--one cleaning separation＂ flotation technology was developed. The experimental resuits show that the clean coal ash content decreases by about 1.36% and the clean coal yield declines by around 10% with the application of the depressant. There is an increase of 3.76% in the yield of clean coal and a decrease of 0.40% in the ash content caused by utilizing a dispersant. An ultimate product having an ash content of 10.78% and yield of 70.12% can be attained using a combination of dispersant and depressant. The use of this new technology decreases the ash content by 1.21%, decreases the yield by 2.80% and an increases the coal flotation perfect index by 2.03%. Compared to common flotation, the utilization of the new technology reduces ash by 0.17%, increases yield by 5.3% and increases perfect index by 4.18%.

Analysis of the Strategies of the 'Replacement of Coal and Oil' with Natural Gas in Sichuan Province

Sichuan Province boasts rich clean energy such as natural gas and hydroelectricity. In order to realize the blueprint of a beautiful China, it is both necessary and feasible for Sichuan Province to ＂replace coal and oil＂ with natural gas. Based on the actual situation of Sichuan Province, through research and investigation, rational thinking and summarization, this paper analyzes the current demand for energy supply in Sichuan, defines the development goals and ideas concerning Sichuan＇s ＇replacement of coal and oil＂ with natural gas, examines the action plan related to such replacement and puts forward relevant policies and suggestions.

Quantitative identification of coal-type gas and oil-type gas in source-mixed gas at the northern margin of Qaidam Basin

The current study tested the gas component and carbon isotopic composition of gas samples from 6 oilgas fields at the northern margin of Qaidam Basin, and established a chart to quantitatively identify the mixing ratio of source-mixed gas. Besides, this research quantitatively investigated the natural gas generated by different types of organic matter. The results show that different ratios of source-mixed gas exist in the 6 oil-gas fields at the northern margin of Qaidam Basin. Among them, Mabei has the highest mixing ratio of coal-type gas, followed by Nanbaxian, Mahai, Lenghu-4, Lenghu-3 and Lenghu-5, with the ratios of coal-type gas 91%, 87%, 83%, 66%, 55% and 36%, respectively. Lenghu-3 and Lenghu-4 oil-gas fields were mainly filled by coal-type gas earlier. For Lenghu-3, the gas was mainly generated from low matured source rocks in lower Jurassic Series of Lengxi sub-sag. For Lenghu-4, the gas was mainly generated from humus-mature source rocks in lower Jurassic Series of the northern slope of Kunteyi sub-sag. Gas in Lenghu-5 was mainly later filled oil-type gas, which was generated from high matured sapropelics in lower Jurassic Series of Kunteyi sub-sag. Earlier filled coal-type gas was the main part of Mahai, Nanbaxian and Mabei oil-gas fields. Gas source of Mahai was mainly generated from high mature humics in lower Jurassic Series of Yibei sub-sag; for Nanbaxian, the gas was mainly generated from high matured humics in middle-lower Jurassic Series of Saishiteng sub-sag; for Mabei, the gas was mainly generated from humus-mature source rocks in middle Jurassic Series of Yuqia sub-sag.

Spectral narratives of microstructural restyling and their controls on hydrocarbon generation potential from coal

The low to medium-rank Tertiary coals from Meghalaya,India,are explored for the first time for their comprehensive micro-structural characterization using the FTIR and Raman spectroscopy.Further,results from these coals are compared with the Permian medium and high-rank coals to understand the microstructural restyling during coalification and its controls on hydrocarbon generation.The coal samples are grouped based on the mean random vitrinite reflectance values to record the transformations in spectral attributes with increasing coal rank.The aliphatic carbon and the apparent aromaticity respond sharply to the first coalification jump(R:0.50%)during low to medium-rank transition and anchizonal metamorphism of the high-rank coals.Moreover,the Raman band intensity ratio changes during the first coalification jump but remains invari-able in the medium-rank coals and turns subtle again during the onset of pregraphitization in high-rank coals,revealing a polynomial trend with the coal metamorphism.The Rock-Eval hydrogen index and genetic potential also decline sharply at the first coalification jump.Besides,an attempt to comprehend the coal microstructural controls on the hydrocarbon poten-tial reveals that the Tertiary coals comprise highly reactive aliphatic functionalities in the type I-S kerogen,along with the low paleotemperature(74.59-112.28℃)may signify their potential to generate early-mature hydrocarbons.However,the presence of type II-II admixed kerogen,a lesser abundance of reactive moieties,and overall moderate paleotemperature(91.93-142.52℃)of the Permian medium-rank coals may imply their mixed hydrocarbon potential.Meanwhile,anchizonal metamorphism,polycondensed aromatic microstructure,and high values of paleotemperature(~334.25 to~366.79℃)of the high-rank coals indicate a negligible potential of producing any hydrocarbons.

中低温煤焦油转化利用技术研究进展

随着煤焦油深加工技术的发展,中低温煤焦油的综合利用受到关注。介绍了国内外中低温煤焦油利用的研究现状,对中低温煤焦油的分离、加氢改质利用,制燃料油、特种油品和高值化学品,煤焦油掺混加氢以及煤沥青利用的研发进行了综述和分析。基于中低温煤焦油馏分的构成特性,提出了中低温煤焦油“分质分级转化利用”技术路线,充分利用其分子特征结构,研究高效催化剂使煤焦油定向转化为目标产品。这为煤焦油高效清洁利用提供了多元化、高值化和精细化的途径。

中国大气田烷烃气碳同位素组成的若干特征

勘探开发大气田是一个国家快速发展天然气工业的重要途径。1991年至2020年,中国新探明大气田68个,促进2020年产气1925×10^(8)m^(3),成为世界第4产气大国。基于中国70个大气田的1696个气样组分和烷烃气碳同位素组成数据,获得中国大气田烷烃气碳同位素组成特征:①δ^(13)C_(1)、δ^(13)C_(2)、δ^(13)C_(3)和δ^(13)C_(4)的最轻值和平均值,随分子中碳数逐增而变重,而δ^(13)C_(1)、δ^(13)C_(2)、δ^(13)C_(3)和δ^(13)C_(4)的最重值,随分子中碳数逐增而变轻。②中国大气田δ^(13)C_(1)值的分布区间为−71.2‰~−11.4‰,其中生物气δ^(13)C_(1)值的分布区间为−71.2‰~−56.4‰;油型气δ^(13)C_(1)值的分布区间为−54.4‰~−21.6‰;煤成气δ^(13)C_(1)值的分布区间为−49.3‰~−18.9‰;无机成因气δ^(13)C_(1)值的分布区间为−35.6‰~−11.4‰;根据这些数据编制了中国大气田的δ^(13)C_(1)值尺图。③中国天然气δ^(13)C_(1)值的分布区间为−107.1‰~−8.9‰,其中生物气δ^(13)C_(1)值为−107.1‰~−55.1‰;油型气δ^(13)C^(1)值为−54.4‰~−21.6‰;煤成气δ^(13)C_(1)值为−49.3‰~−13.3‰;无机成因气δ13C1值为−36.2‰~−8.9‰;根据上述数据编制了中国天然气的δ^(13)C_(1)值尺图。