Dual Control of Depositional Facies on Uranium Mineralization in Coal-bearing Series： Examples from the Tuanyushan Area of the Northern Qaidam Basin, NW China

The uranium deposits in the Tuanyushan area of northern Qaidam Basin commonly occur in coal-bearing series. To decipher the U-enrichment mechanism and controlling factors in this area, a database of 72 drill cores, including 56 well-logs and 3 sampling wells, was examined for sedimentology and geochemistry in relation to uranium concentrations. The results show that coal-bearing series can influence uranium mineralization from two aspects, i.e., spatial distribution and dynamic control. Five types of uranium-bearing rocks are recognized, mainly occurring in the braided river and braided delta sedimentary facies, among which sandstones near the coals are the most important. The lithological associations of sandstone-type uranium deposits can be classified into three subtypes, termed as U-coal type, coal-U-coal type, and coal-U type, respectively. The coal and fine siliciclastic rocks in the coal- bearing series confined the U-rich fluid flow and uranium accumulation in the sandstone near them. Thus, the coal-bearing series can provide good accommodations for uranium mineralization. Coals and organic matters in the coal-bearing series may have served as reducing agents and absorbing barriers. Methane is deemed to be the main acidolysis hydrocarbon in the U-bearing beds, which shows a positive correlation with U-content in the sandstones in the coal-bearing series. Additionally, the 613C in the carbonate cements of the U-bearing sandstones indicates that the organic matters, associated with the coal around the sandstones, were involved in the carbonation, one important component of alteration in the Tuanyushan area. Recognition of the dual control of coal-bearing series on the uranium mineralization is significant for the development of coal circular economy, environmental protection during coal utilization and the security of national rare metal resources.

Depositional process of hyperpycnal flow deposits:A case study on Lower Cretaceous Sangyuan outcrop in the Luanping Basin,Northeast China

Sedimentary process research is of great significance for understanding the distribution and characteristics of sediments.Through the detailed observation and measurement of the Sangyuan outcrop in Luanping Basin,this paper studies the depositional process of the hyperpycnal flow deposits,and divides their depositional process into three phases,namely,acceleration,erosion and deceleration.In the acceleration phase,hyperpycnal flow begins to enter the basin nearby,and then speeds up gradually.Deposits developed in the acceleration phase are reverse.In addition,the original deposits become unstable and are taken away by hyperpycnal flows under the eroding force.As a result,there are a lot of mixture of red mud pebbles outside the basin and gray mud pebbles within the basin.In the erosion phase,the reverse deposits are eroded and become thinner or even disappear.Therefore,no reverse grading characteristic is found in the proximal major channel that is closer to the source,but it is still preserved in the middle branch channel that is far from the source.After entering the deceleration phase,normally grading deposits appear and cover previous deposits.The final deposits in the basin are special.Some are reverse,and others are normal.They are superimposed with each other under the action of hyperpycnal flow.The analysis of the Sangyuan outcrop demonstrates the sedimentary process and distribution of hyperpycnites,and reasonably explain the sedimentary characteristics of hyperpycnites.It is helpful to the prediction of oil and gas exploration targets in gravity flow deposits.

Depositional model of the Member Deng-2 marginal microbial mound-bank complex of the Dengying Formation in the southwestern Sichuan Basin, SW China: Implications for the Ediacaran microbial mound construction and hydrocarbon exploration

Recent advances in hydrocarbon exploration have been made in the Member Deng-2 marginal microbial mound-bank complex reservoirs of the Dengying Formation in the western Sichuan Basin, SW China,where the depositional process is regarded confusing. The microfacies, construction types, and depositional model of the Member Deng-2 marginal microbial mound-bank complex have been investigated using unmanned aerial vehicle photography, outcrop section investigation, thin section identification,and seismic reflections in the southwestern Sichuan Basin. The microbialite lithologic textures in this region include thrombolite, dendrolite, stromatolite, fenestral stromatolite, spongiostromata stone,oncolite, aggregated grainstone, and botryoidal grapestone. Based on the comprehensive analysis of“depositional fabrics-lithology-microfacies”, an association between a fore mound, mound framework,and back mound subfacies has been proposed based on water depth, current direction, energy level and lithologic assemblages. The microfacies of the mound base, mound core, mound flank, mound cap, and mound flat could be recognized among the mound framework subfacies. Two construction types of marginal microbial mound-bank complex have been determined based on deposition location, mound scale, migration direction, and sedimentary facies association. Type Jinkouhe microbial mound constructions(TJMMCs) develop along the windward margin owing to their proximity to the seaward subfacies fore mound, with a northeastwardly migrated microbial mound on top of the mud mound,exhibiting the characteristics of large-sized mounds and small-sized banks in the surrounding area. Type E'bian microbial mound constructions(TEMMCs) primarily occur on the leeward margin, resulting from the presence of onshore back mound subfacies, with the smaller southwestward migrated microbial mounds existing on a thicker microbial flat. The platform margin microbial mound depositional model can be correlated with certain lateral comparison profile and seismic reflection structures in the 2D seismic section, which can provide references for future worldwide exploration. Microbial mounds with larger buildups and thicker vertical reservoirs are typically targeted on the windward margin, while small-sized microbial mounds and flats with better lateral connections are typically focused on the leeward margin.

Sedimentary facies and depositional model of shallow water delta dominated by fluvial for Chang 8 oil-bearing group of Yanchang Formation in southwestern Ordos Basin,China

A systematic analysis of southwestern Ordos Basin's sedimentary characteristics,internal architectural element association styles and depositional model was illustrated through core statistics,well logging data and outcrop observations in Chang 8 oil-bearing group.This analysis indicates that shallow water delta sediments dominated by a fluvial system is the primary sedimentary system of the Chang 8 oil-bearing group of the Yanchang Formation in southwestern Ordos Basin.Four microfacies with fine grain sizes are identified: distributary channels,sheet sandstone,mouth bar and interdistributary fines.According to the sandbody's spatial distribution and internal architecture,two types of sandbody architectural element associations are identified: amalgamated distributary channels and thin-layer lobate sandstone.In this sedimentary system,net-like distributary channels at the delta with a narrow ribbon shape compose the skeleton of the sandbody that extends further into the delta front and shades into contiguous lobate distribution sheet sandstone in the distal delta front.The mouth bar is largely absent in this system.By analyzing the palaeogeomorphology,the palaeostructure background,sedimentary characteristics,sedimentary facies types and spatial distribution of sedimentary facies during the Chang 8 period,a distinctive depositional model of the Chang 8 shallow water fluvial-dominated delta was established,which primarily consists of straight multi-phase amalgamated distributary channels in the delta plain,net-like distributary channels frequently diverting and converging in the proximal delta front,sheet sandstones with dispersing contiguous lobate shapes in the distal delta front,and prodelta or shallow lake mudstones.

Mass-transport Deposits of the Upper Cretaceous Qingshankou Formation, Songliao Terrestrial Basin, Northeast China: Depositional Characteristics, Recognition Criteria and External Geometry

Extensive mass transport deposits（MTDs）, which form a significant component of the stratigraphic record in ancient and modern deep water systems, mostly distributed in the continental margin of ocean basins worldwide. To date, no large-scale MTDs have been found in Chinese terrestrial basins. Based on integrated analysis of the seismic, drilling, core and logging data, this article report MTDs have been found in Songliao terrestrial basin（SLTB）, Northeast China. During the depositional period of the Upper Cretaceous Qingshankou Formation, slope break of lacustrine basins was an ideal discharge place for gravity depositions. Regional sedimentary study of MTDs reveals that Cretaceous-age MTDs in SLTB were deposited in slope-break environments by slide, slump and debris flow, and MTDs were mixed with little turbidite simultaneously. Besides the massive aspect, key features of MTDs are the common presence of deformational structures or softsedimentary deformation, floating shale clasts, boudins, microfaults, distortion beddings, rotated sand debris. Detailed mapping of two three-dimensional（3-D） seismic surveys acquired in Yingtai（YT） and Haituozi（HTZ） areas reveals that MTDs are characterized by chaotic, mounded, and transparent seismic reflection. Growth fault, slope gully and geomorphology of the slope break greatly influenced the sedimentary process and external geometry of MTDs, and as a consequence, MTDs in SLTB exhibit classic fan-like geometry and some special（non-fan-like） external geometry. Furthermore, fanlike MTDs can be divided into three subcategories, including isolated fan, mother-son fan and stacked fan. Non-fan-like MTDs can be divided into two subcategories, strip-like MTDs and faulted-pit MTDs. A new sedimentary model has been built for MTDs in SLTB. MTDs have become a new exploration and development target in the SLTB.

Depositional architecture of the late Ordovician drowned carbonate platform margin and its responses to sea-level fluctuation in the northern slope of the Tazhong region, Tarim Basin

The Tazhong Uplift of the late Ordovician is a drowned rimmed carbonate platform. The carbonate rock of the late Ordovician Lianglitage Formation in the northern slope of the Tazhong region is one of the significant petroliferous intervals. Based on petrofacies, depositional cycles, natural gammaray spectrometry and carbon/oxygen isotope data from the Lianglitage Formation, one 2nd-order, three 3rd-order and several 4th-order sequences have been recognized, and the late Ordovician relative sealevel fluctuation curve has been established. The sequences O3 1-1 and O3 1-2 on the platform are composed of highstand and transgressive systems tracts, but lack the lowstand systems tract. The sequence O3 1-3 is a drowning sequence. The sequence O3 1-1 overlapped the eroded slope and pinched out to the northwest and landward. The highstand systems tract in the sequence O3 1-2 consists of low-angle sigmoid and high-angle shingled progradation configuration. Major sedimentary facies of the Lianglitage Formation include reef and shoal in the platform margin and lagoon, which can be subdivided into coral-sponge-stromatoporoid reef complex, sand shoal, lime mud mound, and intershoal sea. Reefs, sand shoals and their complex are potential reservoir facies. The reefs and sand shoals in the sequence O3 1-1 developed in the upper of its highstand systems tract. In the sequence O3 1-2, the highstand systems tract with an internal prograding configuration is a response to the lateral shifting of the complex of reef and sand shoal. The transgressive systems tract, in particular the sand shoals, developed widely on the slope of the platform margin and interior. The reefs in the sequence O3 1-3 migrated towards high positions and formed retrograding reefs in the western platform and low relief in the platform interior. Basinward lateral migration of the reefs and pure carbonate rock both characterize highstand systems tract and show that the rise of the relative sea-level was very slow. Shingled prograding stacking pattern of the 4th-order sequences and reefs grow horizontally, which represents the late stage of highstand systems tract and implies relative sealevel stillstand. Reefs migrating towards high land and impure carbonate rock both indicate transgressive systems tract and suggest that the relative sea-level rose fast. Erosional truncation and epidiagenetic karstification represent a falling relative sea-level. The relative sea-level fluctuation and antecedent palaeotopography control the development and distribution of reef complexes and unconformity karst zones. Currently, the composite zone of epidiagenetic karstic intervals and high-energy complexes of reefs and sand shoals with prograding configuration is an important oil and gas reservoir in the northern slope of the Tazhong carbonate platform.

Diagenesis and Diagenetic Evolution of Deltaic and Neritic Gas-Bearing Sandstones in the Lower Mingyuefeng Formation of Paleogene, Lishui Sag, East China Sea Shelf Basin: Implications for Depositional Environments and Sequence Stratigraphy Controls

Gas-bearing deposits in the Lower Mingyuefeng Formation of Paleogene, Lishui Sag, East China Sea Shelf Basin consist of shoreface sandstones of the highstand systems tract（HST） and transgressive systems tract（TST）, and deltaic sandstones of the lowstand systems tract（LST） and falling stage systems tract（FSST）.Detailed petrographic observations suggest that the diagenetic features and related evolution of these deposits cannot be simply characterized and demonstrated in the depth domain.However, the occurrence of diagenetic minerals systematically depends on the studied interval within the HST, TST, LST, and FSST; therefore, diagenesis in this region can be better constrained when studied in the context of the depositional environments and sequence stratigraphic framework.The eogenetic processes in such settings include：（1） microcrystalline siderite precipitated as concretions in almost all environments and systems tracts, which inhibited further mechanical compaction;（2） grain dissolution and kaolinitization occurred in shoreface HST sandstones and deltaic LST and FSST sandstones;（3） glaucony was locally observed, which did not clearly reflect the controls of facies or sequence stratigraphy; and（4） cementation by pyrite aggregates occurred in the shoreface HST sandstones and deltaic LST sandstones.The mesogenetic diagenesis includes：（1） partial conversion of kaolinite into dickite in deltaic LST sandstones, and minor chlorite cementation in deltaic FSST sandstones;（2） transformation of kaolinite into illite and quartz cementation in deltaic LST and FSST sandstones;（3） frequent precipitation of ankerite and ferroan calcite in shoreface TST sandstones and early HST sandstones, forming baffles and barriers for fluid flow, with common calcite in shoreface HST sandstones as a late diagenetic cement; and（4） formation of dawsonite in the deltaic LST and FSST sandstones, which is interpreted to be a product of the invasion of a CO2-rich fluid, and acts as a good indicator of CO2-bearing reservoirs.This study has thus constructed a reliable conceptual model to describe the spatial and temporal distribution of diagenetic alterations.The results may provide an entirely new conceptual framework and methodology for successful gas exploration in the continental margins of offshore China, thus allowing us to predict and unravel the distribution and quality evolution of clastic reservoirs at a more detailed and reliable scale.

Depositional System of the Carboniferous Huanglong Formation,Eastern Sichuan Basin:Constraints from Sedimentology and Geochemistry

Using analyses of the lithology,sequences,paleoenvironment,and tectonic setting,the depositional system of the Carboniferous Huanglong Formation in the eastern Sichuan Basin was identified.The lithological characteristics of the Lower Member,Middle Member,and Upper Member were analyzed and classified.Before the use of carbon,oxygen,and strontium isotopes in the analysis,all of the geochemical data were tested for validity.On the basis of the Z values obtained from carbon and oxygen isotopes,the paleoenvironments of the three members were elucidated.Lower Member was dominantly an enclosed marine environment with intense evaporation and little freshwater input into the sea.Middle Member developed in a semi-enclosed to normal marine environment with many rivers.Upper Member was formed in a normal marine environment.The east Sichuan Basin was enclosed by paleouplifts before the deposition of the Huanglong Formation,forming a relatively enclosed depositional setting.Paleogullies developed in the Silurian strata that underlie the Carboniferous rocks;these paleogullies can be identified.On the basis of a comprehensive analysis,we propose that the Huanglong Formation developed in a platform system.Four microfacies were identified：supratidal flat,dolostone flat,grain shoal,and shelf microfacies.The high-permeability and high-porosity characteristics of the grain shoal microfacies are favorable for hydrocarbon accumulation,while the supratidal flat and shelf microfacies developed very few high-quality reservoirs.The paleogullies,in which increased amounts of grain shoal microfacies developed,controlled the distribution of high-quality reservoirs.

The application of three-dimensional seismic spectral decomposition and semblance attribute to characterizing the deepwater channel depositional elements in the Taranaki Basin of New Zealand

In the past few years, three-dimensional（3-D） seismogram has become an essential tool for the interpretation of subsurface stratigraphy and depositional systems. Seismic stratigraphy in conjunction with seismic geomorphology has elevated the degree to which seismic data can facilitate geological interpretation, especially in a deepwater environment. Technologies such as time slicing and interval attribute analysis can enhance geomorphological interpretations, and, when integrated with stratigraphic analyses, can yield insights regarding distribution of seal and reservoir facies. Multiple attributes corendering can further bring out features of geological interest that other technologies may overlook. This method involves corender spectral decomposition components（SDC） with semblance attributes to describe the distribution of deepwater channel elements and the boundaries of deepwater sinuous channel. Applying this technology to four elements is observed：（1） point-bars,（2） migration of channel meander loops,（3） channel erosion/cut, and（4） avulsion. The planview expression of the deepwater channel ranges from low sinuosity to high sinuosity. Furthermore, this technology has enabled interpreters to visualize details of complex depositional elements and can be used to predict net-to-gross ratio in channel systems, which can be incorporated into borehole planning for exploration as well as development needs to improve risk management significantly. The technology is applied to the study area in an effort to illustrate the variety of interpretation technologies available to the geoscientist.

Character of Terrestrial Sequence Stratigraphy and Depositional System in Incised Valley, Outcrop Area of Karamay Oilfield, Junggar Basin, China

In the Karamay oilfield located on the northwestern margin of Junggar basin, Xinjiang, China, a large area of the Karamay Formation is exposed at outcrop in the northeast of the oilfield, a consequence of thrusting. The Middle Triassic Karamay Formation in the outcrop area is a type of terrestrial third-order sequence, bounded by two easily recognizable sequence boundaries: a regional surface of angular unconformity (SB1) at the base and a regional unconformity (SB2) at the top. Within the Karamay Formation, two lacustrine expansion events can be recognized and be used to identify both the initial and the maximum lacustrine flooding surfaces. The two lacustrine flooding surfaces serve as references for the classification of this third-order sequence-Karamay Formation into the following three sedimentary successions: a lower lowstand systems tract (LST), a middle lacustrine-expanding systems tract (EST), and an upper highstand systems tract (HST). Different systems tracts are composed of different depositional system assemblages. In this paper, each depositional system is described in detail. The lowstand systems tract in the study area is characterized by incised valleys. At the base and on the margin of the incised valleys occur alluvial fan depositional systems, and in the upper and distal parts of the alluvial fan, low-sinuosity river depositional systems. The lacustrine-expanding systems tract consists of a lacustrine depositional system and a lacustrine delta depositional system, overlying the lower incised valley fills. The highstand systems tract is filled by a widespread lacustrine braided delta depositional system. The analysis of sequence stratigraphy in this paper serves the description of the spatial distribution of the reservoir. The depositional system analysis serves the description of the reservoir types. Field investigations of oil sandstone and oil seepage show that the Karamay Formation is composed of several types of reservoirs. However, two types of high quality reservoir occur both in the upper interval of the lowstand systems tract and in the lacustrine-expanding systems tract: gravelly low-sinuosity channel in the distal fans and sandy-gravelly distributary channel in the lacustrine delta plain.

Depositional conditions and modeling of Triassic Oil shale in southern Ordos Basin using geochemical records

Based on the element geochemistry and biomarkers of the oil shale from the Chang 7 sub-unit in the southern Ordos Basin,the depositional conditions and organic source of the oil shale are discussed.Biomarkers analyses show that the oil shale has a homologous organic matter source,with a mix of plankton and advanced plants.U/Th and V/Ni ratios suggest that the redox condition is dominated by a reducing condition,and the degree of anoxia in the Tongchuan area is higher than that of the Xunyi area.Sr/Ba ratios illustrate that the oil shale is deposited in fresh water and the paleosalinity in the Tongchuan area is slightly higher.Fe/Ti ratios imply that the Tongchuan area underwent obvious hydrothermal fluid activities.Sr/Cu ratios show warm and humid paleoclimate in both areas.As assessed by(La/Yb)NASC,the deposition rate in the Tongchuan area is relatively lower.Fe/Co and Th/U ratios suggest that the paleo-water-depth in the Tongchuan area is deeper.The source rock could have the advance plants source,which must have close relationship with the Qinling orogeny.Comparing the paleoenvironment,the Tongchuan area has better depositional conditions,and is the key oil shale exploration area in the southern Ordos Basin.

Geochemistry and Depositional Setting of Fort Munro Formation,Middle and Lower Indus Basins,Pakistan

Fort Munro Formation represents the products of the Upper Cretaceous (Maastrichtian) in the middle and lower Indus basins. The formation is exposed in the Rakhi Nala (Sulaiman Range), Bara Nala (Lakhi Range) and Naka Pabni (Southern Pab Range) areas. Major and trace elemental geochemistry and petrographic studies of the formation have been carried out to understand the facies trends in the middle and lower Indus basins. A high amount of acid-insoluble fraction, Ca/Mg and Mg vs. Ca/Sr ratio reveal that the formation was deposited in a shallow marine regressive environment. High amounts of clastic reflect abundant influx of terrigenous materials from the east (Indian craton) and west (Bibai volcanic). High Sr content indicates that aragonite was the precursor mineral, which was transformed into stable low-Mg calcite during diagenesis. Enrichment of Cu and Zn contents in the samples of the formation implies the influence of volcanic activity and that they were incorporated into the calcite lattice in the late phase.

Sedimentary system characteristics and depositional filling model of Upper Permian——Lower Triassic in South Yellow Sea Basin

In the South Yellow Sea Basin,Mesozoic–Paleozoic marine strata are generally well developed with large thickness,and no substantial breakthroughs have been made in hydrocarbon exploration.Through research,it is believed that the Upper Permian–Lower Triassic can be regarded as a long-term base-level cycle.Based on drilling data,characteristics of the lithology–electric property combination cyclicity,and the special lithology,the long-term base-level cycle was divided into five medium-term base-level cycles(MC1–MC5).On this basis,the Permian–Triassic sedimentary systems and their filling model were analyzed in accordance with the change of base-level cycle and transition of sedimentary environment,as well as characteristics of the drilling sedimentary facies and seismic facies.The results show that there were six sedimentary systems(fluvial,delta,tidal flat,open platform,restricted platform,and continental shelf)developed in the Upper Permian–Lower Triassic,the sedimentary systems were distributed such that the water was deep in the northwest and shallow in the southeast,and there were two base-level cycle filling models(a relatively stable tidal flat facies and a rapidly transgressive continental shelf facies to stable platform facies)developed in the Upper Permian–Lower Triassic.These models can provide a basis for evaluation of the Mesozoic–Paleozoic hydrocarbon geology in the South Yellow Sea Basin.

Sr Isotope Geochemistry and Depositional Setting of Carbonate in Ordovician,Ordos Basin,China

China is in severe shortage of potash reserves,and the best way for breakthrough is to make potash exploration in marine salt basins.Erdos basin is so far the only Ordovician potash basin in the world.The Erdos basin is located west

Depositional Responding to Tectonic Evolution of East China Sea Shelf Basin

? The East China Sea Shelf basin is a large marginal rift basin occurred in backarc area of west Pacific. Three main regional unconformities and eleven sequence boundary isochronous surfaces (hiatuses) were developed within the basin filling, which are separared the fill succession into three tectonic sequences and fourteen sequences. The depositional response of every tectonic sequence indicates the different phases in the evolution of basin and a specific filling process or filling pattern.

Factors controlling organic-rich shale development in the Liushagang Formation,Weixinan Sag,Beibu Gulf Basin:Implications of structural activity and the depositional environment

The mechanisms of lacustrine organic-rich shale formation have attracted attention due to its association with global shale oil and shale gas exploration.Samples of general-quality and excellent-quality source rocks,and oil shale from the Beibu Gulf Basin were analyzed to investigate their organic geochemistry,palynofacies,and trace elements.Hydrocarbon potential was higher in the oil shale(29.79 mg/g)than in the general-quality source rock(3.82 mg/g),and its kerogen type wasⅠ-Ⅱ2.Hydrogen-rich liptinite(cutinite and sporinite)components derived from terrigenous higher plants provided most of the hydrocarbon potential of excellent-quality source rock and oil shale.Under the influence of depressioncontrolling fault activity,a deeper subsidence center promotes the deposition of excellent-quality source rock and oil shale in brackish-hypoxic bottom water.A shallower subsidence center,due to subsag-controlling fault activity,promotes the formation of excellent-quality source rock under freshbrackish and weak oxidation-weak reducing conditions.The local uplift and shallow-slope led to the formation of general-quality source rock,under freshwater weak-oxidation conditions.A model was established for organic matter(OM)accumulation in organic-rich shales,accounting for fault activity,terrigenous hydrogen-rich OM,and the preservation conditions,to predict the development of excellent-quality source rock from areas with low levels of exploration.

Atmospheric Sulfur and Nitrogen Deposition in Five Nature Reserves of Sichuan Basin to Qinghai-Tibetan Plateau Transect Region,Southwest-ern China

Enhanced sulfur and nitrogen deposition has been observed in many transect regions worldwide,from urban/agricultural areas to mountains.The Sichuan Basin(SCB),with 18 prefectural cities,is the most economically-developed region in western China,while the rural Qinghai-Tibetan Plateau(QTP)lies west of the SCB.Previous regional and national atmospheric modeling studies have sug-gested that large areas in the SCB-to-QTP transect region experience excessive deposition of sulfur and nitrogen.In this study,we applied a passive monitoring method at 11 sites(one in urban Chengdu and 10 from fivenature reserves)in this transect region from September 2021 to October 2022 to confirm the high sulfur and nitrogen deposition fluxes and to understand the gaps between the modeling and observation results for this transect region.These observations suggest that the five reserves are under eutrophication risk,and only two reserves are partially under acidification risk.Owing to the complex topography and landscapes,both sulfur and nitrogen deposition and critical loads exhibit large spatial variations within a reserve,such as Mount Emei.Regional atmospheric modeling may not accurately capture the spatial variations in deposition fluxes within a reserve;however,it can capture general spatial patterns over the entire transect.This study demonstrates that a combination of state-of-the-art atmospheric chemical models and low-cost monitoring methods is helpful for ecological risk assessments at a regional scale.

Cenozoic giant coal-bearing basin belt discovered in China's sea and its adjacent areas

Sea area is an important area of oil and gas exploration in China.It has been found that China's sea area mainly consists of coal type oil and gas,and the exploration of coal-bearing series source rocks has become an important part of oil and gas exploration there.Through years of comprehensive geological research in China's sea area,it has been revealed that it has undergone multiple occurrences of tectonic opening and closing movements in varying degrees in the Paleogene,forming 26 Cenozoic sedimentary basins of various types,such as active continental margin,passive continental margin,transitional continental margin and drift rift basins.In the present study,it is observed for the first time that coal type source rocks are mainly developed in 14 continental margin basins in China's sea area,revealing that a very large C-shaped coal-bearing basin group developed there in the Cenozoic.Next,based on the coupling analysis of paleoclimate,paleobotany,paleogeography and paleostructure,it is observed that there are five coal-forming periods in China's sea area,namely the Paleocene,Eocene,early Oligocene,late Oligocene and Miocene-Pliocene,and the coal-forming age is gradually new from north to south.It is also found that the coal seams in the sea area are mainly developed in three coal-forming environments in Cenozoic,namely delta,fan delta and tidal flat-lagoon.The coal seams developed in different environments are characterized by thin thickness,many layers and poor stability.However,the coal-bearing series source rocks in China's sea area have a wide distribution range,very high thickness and large amount,thus forming a material basis for the formation of rich coal type oil and gas.

A study of sequence stratigraphy of the Early Cretaceous coal-bearing series in the southeastern Songliao Basin, NE China

The Early Cretaceous is an important coal accumulation period in China.Abundant coal resources were formed in the southeastern margin of Songliao Basin.Sequence stratigraphy and coal accumulation of the Early Cretaceous in the southeastern margin of Songliao Basin have been studied on the basis of extensive outcrop and borehole data.Based on regional unconformity,basal erosional surfaces of incised valley fills,and abrupt depositional facies-reversal surface,six sequence boundaries have been identified,which subdivide the Early Cretaceous coal-bearing series into 5 third-order sequences.Sequence I corresponds to Huoshiling Formation,sequences II and III correspond to member I and member II of Shahezi Formation.Sequences IV and V correspond to member I and member II of Yingcheng Formation.Sequence I developed at the initial subsiding stage,sequence II and III developed during the stable subsiding stage,while sequence IV and V developed during the basin shrinkage stage.The major coal seams were developed in the sequence II and III,which ensured the relative balance between the increase rate of the accommodation space and the rate of peat accumulation for a longer period,thus forming a thick coal seam.

New Insights into the Depositional Environments of Ordovician Carbonate Formations in the Yubei Area of Tarim Basin Based on Standard Microfacies Types

Objective The Yubei area is located in the mid-east Maigaiti slope of southwestern Tarim Basin, China, with an exploration history of several years. Recent exploration has preliminarily indicated that the Ordovician carbonate formations in this area have some oil and gas potential. Carbonate microfacies provides material basis for reservoir development, seal formation and hydrocarbon generation. Therefore, this work utilized the standard microfacies （SMF） types to study the microfacies of the Ordovician formations in the Yubei area in order to provide theoretical basis for the next exploration.