With a particular reference to China Huaneng Group's practices in CO_2 capture, this article presents a brief ing on the current development of CO_2 capture technologies in coal-fired power plants both in China an...With a particular reference to China Huaneng Group's practices in CO_2 capture, this article presents a brief ing on the current development of CO_2 capture technologies in coal-fired power plants both in China and abroad. Sooner or later, the integration of CO_2 capture and storage (CCS) facility with coal-fired power plant will be inevitably put on the agenda of developers.展开更多
A promising scheme for coal-fired power plants in which biomass co-firing and carbon dioxide capture technologies are adopted and the low-temperature waste heat from the CO_(2) capture process is recycled to heat the ...A promising scheme for coal-fired power plants in which biomass co-firing and carbon dioxide capture technologies are adopted and the low-temperature waste heat from the CO_(2) capture process is recycled to heat the condensed water to achieve zero carbon emission is proposed in this paper.Based on a 660 MW supercritical coal-fired power plant,the thermal performance,emission performance,and economic performance of the proposed scheme are evaluated.In addition,a sensitivity analysis is conducted to show the effects of several key parameters on the performance of the proposed system.The results show that when the biomass mass mixing ratio is 15.40%and the CO_(2) capture rate is 90%,the CO_(2) emission of the coal-fired power plant can reach zero,indicating that the technical route proposed in this paper can indeed achieve zero carbon emission in coal-fired power plants.The net thermal efficiency decreases by 10.31%,due to the huge energy consumption of the CO_(2) capture unit.Besides,the cost of electricity(COE)and the cost of CO_(2) avoided(COA)of the proposed system are 80.37/MWhand41.63/tCO_(2),respectively.The sensitivity analysis demonstrates that with the energy consumption of the reboiler decreasing from 3.22 GJ/tCO_(2) to 2.40 GJ/tCO_(2),the efficiency penalty is reduced to 8.67%.This paper may provide reference for promoting the early realization of carbon neutrality in the power generation industry.展开更多
Fuel cells electrochemically convert chemical energy in fuels into electrical energy(and heat)and so can produce power efficiently with low environmental impact.Applications of fuel cells include stationary power gene...Fuel cells electrochemically convert chemical energy in fuels into electrical energy(and heat)and so can produce power efficiently with low environmental impact.Applications of fuel cells include stationary power generation,distributed combined heat and power(CHP)and portable power.Recently,research has been conducted on direct carbon fuel cell(DCFC)technology that converts the chemical energy in solid carbon directly into electricity.This article discusses these technologies and their development status.For small-to medium-sized stationary power systems and CHP,the USA ranks first for fuel cell capacity and Japan leads for delivery systems.South Korea is home to the world’s largest fuel cell power plant:the 59-MW Gyeonggi Green Energy park in Hwasung City.Deployment of fuel cell systems is driven by support from governments in the form of tax credits and other incentives.For large stationary power generation,current interest is in integrating a coal gasification process with high-temperature fuel cells(IGFC)to create ultra-high-efficiency,low-emissions power generation systems.The first IGFC demonstration plant with CCS may be in Japan in 2021 as a result of the CoolGen project.DCFC is still in its infancy and far from demonstration.The overall challenges for stationary fuel cells are cost and cell durability.Experience gained from research,designing,building and operating commercially available systems and the IGFC demonstration plant should lead to further development of the technologies and reduced costs,making them a realistic option for power generation.展开更多
CO_(2) Plume Geothermal(CPG)systems are a promising concept for utilising petrothermal resources in the context of a future carbon capture utilisation and sequestration economy.Petrothermal geothermal energy has a tre...CO_(2) Plume Geothermal(CPG)systems are a promising concept for utilising petrothermal resources in the context of a future carbon capture utilisation and sequestration economy.Petrothermal geothermal energy has a tremendous worldwide potential for decarbonising both the power and heating sectors.This paper investigates three potential CPG configurations for combined heating and power generation(CHP).The present work examines scenarios with reservoir depths of 4 km and 5 km,as well as required district heating system(DHS)supply temperatures of 70℃ and 90℃.The results reveal that a two-staged serial CHP concept eventuates in the highest achievable net power output.For a thermosiphon system,the relative net power reduction by the CHP option compared with a sole power generation system is significantly lower than for a pumped system.The net power reduction for pumped systems lies between 62.6%and 22.9%.For a thermosiphon system with a depth of 5 km and a required DHS supply temperature of 70℃,the achievable net power by the most beneficial CHP option is even 9.2%higher than for sole power generation systems.The second law efficiency for the sole power generation concepts are in a range between 33.0%and 43.0%.The second law efficiency can increase up to 63.0%in the case of a CHP application.Thus,the combined heat and power generation can significantly increase the overall second law efficiency of a CPG system.The evaluation of the achievable revenues demonstrates that a CHP application might improve the economic performance of both thermosiphon and pumped CPG systems.However,the minimum heat revenue required for compensating the power reduction increases with higher electricity revenues.In summary,the results of this work provide valuable insights for the potential development of CPG systems for CHP applications and their economic feasibility.展开更多
文摘With a particular reference to China Huaneng Group's practices in CO_2 capture, this article presents a brief ing on the current development of CO_2 capture technologies in coal-fired power plants both in China and abroad. Sooner or later, the integration of CO_2 capture and storage (CCS) facility with coal-fired power plant will be inevitably put on the agenda of developers.
基金supported by the National Natural Science Foundation of China(Grant No.51806062)the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(Grant No.51821004)the Fundamental Research Funds for the Central Universities(Grant No.2020MS006).
文摘A promising scheme for coal-fired power plants in which biomass co-firing and carbon dioxide capture technologies are adopted and the low-temperature waste heat from the CO_(2) capture process is recycled to heat the condensed water to achieve zero carbon emission is proposed in this paper.Based on a 660 MW supercritical coal-fired power plant,the thermal performance,emission performance,and economic performance of the proposed scheme are evaluated.In addition,a sensitivity analysis is conducted to show the effects of several key parameters on the performance of the proposed system.The results show that when the biomass mass mixing ratio is 15.40%and the CO_(2) capture rate is 90%,the CO_(2) emission of the coal-fired power plant can reach zero,indicating that the technical route proposed in this paper can indeed achieve zero carbon emission in coal-fired power plants.The net thermal efficiency decreases by 10.31%,due to the huge energy consumption of the CO_(2) capture unit.Besides,the cost of electricity(COE)and the cost of CO_(2) avoided(COA)of the proposed system are 80.37/MWhand41.63/tCO_(2),respectively.The sensitivity analysis demonstrates that with the energy consumption of the reboiler decreasing from 3.22 GJ/tCO_(2) to 2.40 GJ/tCO_(2),the efficiency penalty is reduced to 8.67%.This paper may provide reference for promoting the early realization of carbon neutrality in the power generation industry.
文摘Fuel cells electrochemically convert chemical energy in fuels into electrical energy(and heat)and so can produce power efficiently with low environmental impact.Applications of fuel cells include stationary power generation,distributed combined heat and power(CHP)and portable power.Recently,research has been conducted on direct carbon fuel cell(DCFC)technology that converts the chemical energy in solid carbon directly into electricity.This article discusses these technologies and their development status.For small-to medium-sized stationary power systems and CHP,the USA ranks first for fuel cell capacity and Japan leads for delivery systems.South Korea is home to the world’s largest fuel cell power plant:the 59-MW Gyeonggi Green Energy park in Hwasung City.Deployment of fuel cell systems is driven by support from governments in the form of tax credits and other incentives.For large stationary power generation,current interest is in integrating a coal gasification process with high-temperature fuel cells(IGFC)to create ultra-high-efficiency,low-emissions power generation systems.The first IGFC demonstration plant with CCS may be in Japan in 2021 as a result of the CoolGen project.DCFC is still in its infancy and far from demonstration.The overall challenges for stationary fuel cells are cost and cell durability.Experience gained from research,designing,building and operating commercially available systems and the IGFC demonstration plant should lead to further development of the technologies and reduced costs,making them a realistic option for power generation.
基金Funding from the Bavarian State Ministry of Education,Science and the Arts in the framework of the Project Geothermal-Alliance Bavaria。
文摘CO_(2) Plume Geothermal(CPG)systems are a promising concept for utilising petrothermal resources in the context of a future carbon capture utilisation and sequestration economy.Petrothermal geothermal energy has a tremendous worldwide potential for decarbonising both the power and heating sectors.This paper investigates three potential CPG configurations for combined heating and power generation(CHP).The present work examines scenarios with reservoir depths of 4 km and 5 km,as well as required district heating system(DHS)supply temperatures of 70℃ and 90℃.The results reveal that a two-staged serial CHP concept eventuates in the highest achievable net power output.For a thermosiphon system,the relative net power reduction by the CHP option compared with a sole power generation system is significantly lower than for a pumped system.The net power reduction for pumped systems lies between 62.6%and 22.9%.For a thermosiphon system with a depth of 5 km and a required DHS supply temperature of 70℃,the achievable net power by the most beneficial CHP option is even 9.2%higher than for sole power generation systems.The second law efficiency for the sole power generation concepts are in a range between 33.0%and 43.0%.The second law efficiency can increase up to 63.0%in the case of a CHP application.Thus,the combined heat and power generation can significantly increase the overall second law efficiency of a CPG system.The evaluation of the achievable revenues demonstrates that a CHP application might improve the economic performance of both thermosiphon and pumped CPG systems.However,the minimum heat revenue required for compensating the power reduction increases with higher electricity revenues.In summary,the results of this work provide valuable insights for the potential development of CPG systems for CHP applications and their economic feasibility.